Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A general real-time formulation for multi-rate mass transfer problems

  • Silva, Orlando
  • Carrera, Jesús
  • Kumar, Shant
  • Alcolea, A.
  • Dentz, Marco
13 páginas, 7 figuras, 1 tabla., Many flow and transport phenomena, ranging from delayed storage in pumping tests to tailing in river or aquifer tracer breakthrough curves or slow kinetics in reactive transport, display non-equilibrium (NE) behavior. These phenomena are usually modeled by non-local in time formulations, such as multi-porosity, multiple processes non equilibrium, continuous time random walk, memory functions, integro-differential equations, fractional derivatives or multi-rate mass transfer (MRMT), among others. We present a MRMT formulation that can be used to represent all these models of non equilibrium. The formulation can be extended to non-linear phenomena. Here, we develop an algorithm for linear mass transfer, which is accurate, computationally inexpensive and easy to implement in existing groundwater or river flow and transport codes. We illustrate this approach by application to published data involving NE groundwater flow and solute transport in rivers and aquifers., Financial support received from CICYT and ENRESA of Spain, and EC projects FUNMIG (contract number 516514) and MUSTANG (contract number 227286). We also acknowledge the support received from the MICINN and the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Impact of Buoyancy on Front Spreading in 1 Heterogeneous Porous Media in Two-Phase 2 Immiscible Flow

  • Bolster, Diogo
  • Neuweiler, Insa
  • Dentz, Marco
  • Carrera, Jesús
17 páginas, 11 figuras. Número de artículo W02508., We study the influence of buoyancy and spatial heterogeneity on the spreading of the saturation front of a displacing fluid during injection into a porous medium saturated with another, immiscible fluid. To do so we use a stochastic modeling framework. We derive an effective large-scale flow equation for the saturation of the displacing fluid that is characterized by six nonlocal flux terms, four that resemble dispersive type terms and two that have the appearance of advection terms. From the effective large-scale flow equation we derive measures for the spreading of the saturation front. A series of full two-phase numerical solutions are conducted to complement the analytical developments. We find that the interplay between density and heterogeneity leads to an enhancement of the front spreading on one hand and to a renormalization of the evolution of the mean front position compared with an equivalent homogeneous medium. The quantification of these phenomena plays an important role in several applications, including, for example, carbon sequestration and enhanced oil recovery., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effective Non-Local Reaction Kinetics for Transport in Physically and Chemically Heterogeneous Media

  • Dentz, Marco
  • Gouze, Philippe
  • Carrera, Jesús
48 páginas, 8 figuras., The correct characterization of the effective reactive transport dynamics is an important issue for modeling reactive transport on the Darcy scale, specifically in situations in which reactions are localized, that is when different reactions occur in different portions of the porous medium. Under such conditions the conventional approach of homogenizing only the porous medium chemistry is not appropriate. We consider here reactive transport in a porous medium that is characterized by mass transfer between a mobile and a distribution of immobile regions. Chemical and physical heterogeneity are reflected by distributions of kinetic reaction rate constants and residence times in the immobile zones. We derive an effective reactive transport equation for the mobile solute that is characterized by non-local physical mass transfer and reaction terms. Specifically, chemical heterogeneity is upscaled in terms of a reactive memory function that integrates both chemical and physical heterogeneity. Mass transfer limitations due to physical heterogeneity yield effective kinetic rate coefficients that can be much smaller than the volumetric average of the local scale coefficients. These results help to explain and quantify the often reported discrepancy between observed field reaction rate constants and the ones obtained under well mixed laboratory conditions. Furthermore, these results indicate that transport under physical and chemical heterogeneity cannot be upscaled separately., The authors thank the editor Al Valocchi and Insa Neuweiler and an anonymous reviewer for their insightful comments and suggestions. The authors acknowledge the support of CIUDEN, the ANR project COLINER and the European Union project MUSTANG and CIUDEN., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coupled hydromechanical modeling of CO2 sequestration in deep saline aquifers

  • Vilarrasa, Víctor
  • Bolster, Diogo
  • Olivella, Sebastià
  • Carrera, Jesús
38 páginas, 11 figuras., Sequestration of carbon dioxide (CO2) in deep saline aquifers has emerged as an option for reducing greenhouse gas emissions to the atmosphere. The large amounts of supercritical CO2 that need to be injected into deep saline aquifers may cause large fluid pressure increases. The resulting overpressure may promote reactivation of sealed fractures or the creation of new ones in the caprock seal. This could lead to escape routes for CO2. In order to assess the probability of such an event, we model an axisymmetric horizontal aquifer-caprock system, including hydromechanical coupling. We study the failure mechanisms, using a viscoplastic approach. Simulations illustrate that, depending on boundary conditions, the least favorable moment takes place at the beginning of injection. Initially, fluid pressure rises sharply because of a reduction in permeability due to desaturation. Once CO2 fills the pores in the vicinity of the injection well and a capillary fringe is fully developed, the less viscous CO2 displaces the brine and the capillary fringe laterally. The overpressure caused by the permeability reduction within the capillary fringe due to desaturation decreases with distance from the injection well. This results in a drop in fluid pressure buildup with time, which leads to a safer situation. Nevertheless, in the presence of low-permeability boundaries, fluid pressure continues to rise in the whole aquifer. This occurs when the radius of influence of the injection reaches the outer boundary. Thus, caprock integrity might be compromised in the long term., V.V. and D.B. would like to acknowledge the Spanish Ministry of Science and Innovation (MIC) for financial support through the “Formación de Profesorado Universitario” and “Juan de la Cierva” programs. V.V. also wishes to acknowledge the “Colegio de Ingenieros de Caminos, Canales y Puertos – Catalunya” for their financial support. This project has been funded by the Spanish Ministry of Science and Innovation through the CIUDEN project (Ref.: 030102080014), and through the MUSTANG project, from the European Community’s Seventh Framework Programme FP7/2007-2013 under grant agreement nº 227286., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Geomechanical stability of the caprock during CO2 sequestration in deep saline aquifers

  • Vilarrasa, Víctor
  • Olivella, Sebastià
  • Carrera, Jesús
8 páginas, 5 figuras., Sequestration of carbon dioxide (CO2) in deep saline aquifers has emerged as a mitigation strategy for reducing greenhouse gas emissions to the atmosphere. The large amounts of supercritical CO2 that need to be injected into deep saline aquifers may cause large fluid pressure buildup. The resulting overpressure will produce changes in the effective stress field. This will deform the rock and may promote reactivation of sealed fractures or the creation of new ones in the caprock seal, which could lead to escape paths for CO2. To understand these coupled hydromechanical phenomena, we model an axisymmetric horizontal aquifer-caprock system. We study plastic strain propagation patterns using a viscoplastic approach. Simulations illustrate that plastic strain may propagate through the whole thickness of the caprock if horizontal stress is lower than vertical stress. In contrast, plastic strain concentrates in the contact between the aquifer and the caprock if horizontal stress is larger than vertical stress. Aquifers that present a low-permeability boundary experience an additional fluid pressure increase once the pressure buildup cone reaches the outer boundary. However, fluid pressure does not evolve uniformly in the aquifer. While it increases in the low-permeability boundary, it drops in the vicinity of the injection well because of the lower viscosity of CO2. Thus, caprock stability does not get worse in semi-closed aquifers compared to open aquifers. Overall, the caprock acts as a plate that bends because of pressure buildup, producing a horizontal extension of the upper part of the caprock. This implies a vertical compression of this zone, which may produce settlements instead of uplift in low-permeability (k≤10-18 m2) caprocks at early times of injection., V.V. would like to acknowledge the Spanish Ministry of Science and Innovation (MIC) for financial support through the “Formación de Profesorado Universitario” program. V.V. also wishes to acknowledge the “Colegio de Ingenieros de Caminos, Canales y Puertos – Catalunya” for their financial support. This project has been funded by the Spanish Ministry of Science and Innovation through the project CIUDEN (Ref.: 030102080014), and through the MUSTANG project, from the European Community’s Seventh Framework Programme FP7/2007-2013 under grant agreement nº 227286., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Distribution Versus Correlation Induced Anomalous Transport in Quenched Random Velocity Fields

  • Dentz, Marco
  • Bolster, Diogo
4 páginas., We study mechanisms of anomalous transport in quenched random media. Broad disorder point distributions and strong disorder correlations cause anomalous transport and can lead to the same anomalous scaling laws for the mean and variance of the particle displacements. The respective mechanisms, however, are fundamentally different. This difference is reflected in the spatial particle densities and first passage time distributions, which provide an indicator to identify the origins of anomalous transport., MD acknowledges the financial support of project 200930I188 of the Spanish National Research Council (CSIC) and the EU funded project MUSTANG (Grant agreement 227286)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Probability density functions for passive scalars dispersed in random velocity fields

  • Dentz, Marco
  • Tartakovsky, Daniel M.
Spatial and temporal heterogeneity of ambient natural environments play a significant role in large scale transport phenomena. Uncertainty about spatio-temporal fluctuations in system parameters (e.g., flow velocity) make deterministic predictions of macroscopic system states (e.g., solute concentration) elusive. Distributions of system states generally exhibit highly non-Gaussian behavior, which cannot be captured solely by the corresponding mean and variance. Instead, these features of transport are described by the probability density function (PDF) of a system state, e.g., the PDF of concentration at a certain point in space and time. We study the PDF of a passive scalar that disperses in a random velocity field. We derive an explicit map between the velocity distribution and the scalar PDF, and obtain approximate solutions for the PDF of the normalized scalar. These solutions enable one to quantify explicitly the impact of dispersion on the evolution of the passive scalar PDF without recurrence to classical closure approximations used in mixing models. Copyright 2010 by the American Geophysical Union., This research was partially supported by the DOE Office of Science Advanced Scientific Computing Research (ASCR) program in Applied Mathematical Sciences, and by the Office of Science (BER), Cooperative Agreement DE‐FC02‐07ER64324. MD acknowledges the financial support of project 200930I188 of the Spanish National Research Council (CSIC) and the EU funded project MUSTANG (Grant Agreement 227286)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effects of CO2 Compressibility on CO2 Storage in Deep Saline Aquifers

  • Vilarrasa, Víctor
  • Bolster, Diogo
  • Dentz, Marco
  • Olivella, Sebastià
  • Carrera, Jesús
The injection of supercritical CO2 in deep saline aquifers leads to the formation of a CO2 plume that tends to float above the formation brine. As pressure builds up, CO2 properties, i. e. density and viscosity, can vary significantly. Current analytical solutions do not account for CO2 compressibility. In this article, we investigate numerically and analytically the effect of this variability on the position of the interface between the CO2-rich phase and the formation brine. We introduce a correction to account for CO2 compressibility (density variations) and viscosity variations in current analytical solutions. We find that the error in the interface position caused by neglecting CO2 compressibility is relatively small when viscous forces dominate. However, it can become significant when gravity forces dominate, which is likely to occur at late times of injection. © Springer Science+Business Media B.V. 2010., Additionally, we would like to acknowledge the 'CIUDEN' project (Ref.: 030102080014), the 'PSE' project (Ref.: PSE-120000-2008-6), the 'COLINER' project and the 'MUSTANG' project (from the European Community's Seventh Framework Programme FP7/2007-2013 under grant agree- ment no 227286) for their nancial support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Semianalytical Solution for CO2 Plume Shape and Pressure Evolution During CO2 Injection in Deep Saline Formations

  • Vilarrasa, Víctor
  • Carrera, Jesús
  • Bolster, Diogo
  • Dentz, Marco
The injection of supercritical carbon dioxide (CO2) in deep saline aquifers leads to the formation of a CO2 rich phase plume that tends to float over the resident brine. As pressure builds up, CO2 density will increase because of its high compressibility. Current analytical solutions do not account for CO2 compressibility and consider a volumetric injection rate that is uniformly distributed along the whole thickness of the aquifer, which is unrealistic. Furthermore, the slope of the CO2 pressure with respect to the logarithm of distance obtained from these solutions differs from that of numerical solutions. We develop a semianalytical solution for the CO2 plume geometry and fluid pressure evolution, accounting for CO2 compressibility and buoyancy effects in the injection well, so CO2 is not uniformly injected along the aquifer thickness. We formulate the problem in terms of a CO2 potential that facilitates solution in horizontal layers, with which we discretize the aquifer. Capillary pressure is considered at the interface between the CO2 rich phase and the aqueous phase. When a prescribed CO2 mass flow rate is injected, CO2 advances initially through the top portion of the aquifer. As CO2 is being injected, the CO2 plume advances not only laterally, but also vertically downwards. However, the CO2 plume does not necessarily occupy the whole thickness of the aquifer. We found that even in the cases in which the CO2 plume reaches the bottom of the aquifer, most of the injected CO2 enters the aquifer through the layers at the top. Both CO2 plume position and fluid pressure compare well with numerical simulations. This solution permits quick evaluations of the CO2 plume position and fluid pressure distribution when injecting supercritical CO2 in a deep saline aquifer. © 2013 Springer Science+Business Media Dordrecht., This work has been funded by Fundación Ciudad de la Energía (Spanish Government) (www.ciuden.es) and 35 by the European Union through the “European Energy Programme for Recovery” and the Compostilla OXYCFB300 project. We also want to acknowledge the financial support received from the ‘MUSTANG’ (www.co2mustang.eu) and ‘PANACEA’ (www.panacea-co2.org) projects (from the European Community’s Seventh Framework Programme FP7/2007-2013 under grant agreements nº 227286 and nº 282900, respectively)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Liquid CO2 injection for geological storage in deep saline aquifers

  • Vilarrasa, Víctor
  • Silva, Orlando
  • Carrera, Jesús
  • Olivella, Sebastià
CO2 will remain in supercritical (SC) state (i.e. p>7.382MPa and T>31.04°C) under the pressure (p) and temperature (T) conditions appropriate for geological storage. Thus, it is usually assumed that CO2 will reach the aquifer in SC conditions. However, inflowing CO2 does not need to be in thermal equilibrium with the aquifer. In fact, surface operations are simpler for liquid than for SC CO2, because CO2 is transported in liquid state. Yet, problems might arise because of thermal stresses induced by cold CO2 injection and because of phase changes in the injection tubing or in the formation. Here, we propose liquid CO2 injection and analyze its evolution and the thermo-hydro-mechanical response of the formation and the caprock. We find that injecting CO2 in liquid state is energetically more efficient than in SC state because liquid CO2 is denser than SC CO2, leading to a lower overpressure not only at the wellhead, but also in the reservoir because a smaller fluid volume is displaced. Cold CO2 injection cools down the formation around the injection well. Further away, CO2 equilibrates thermally with the medium in an abrupt front. The liquid CO2 region close to the injection well advances far behind the SC CO2 interface. While the SC CO2 region is dominated by gravity override, the liquid CO2 region displays a steeper front because viscous forces dominate (liquid CO2 is not only denser, but also more viscous than SC CO2). The temperature decrease close to the injection well induces a stress reduction due to thermal contraction of the media. This can lead to shear slip of pre-existing fractures in the aquifer for large temperature contrasts in stiff rocks, which could enhance injectivity. In contrast, the mechanical stability of the caprock is improved in stress regimes where the maximum principal stress is the vertical. © 2013 Elsevier Ltd., V.V. wishes to acknowledge the Spanish Ministry of Science and Innovation (MCI), through the “Formación de Profesorado Universitario” Program, and the “Colegio de Ingenieros de Caminos, Canales y Puertos – Catalunya” for their financial support. This work has been funded by Fundación Ciudad de la Energía (Spanish Government) (www.ciuden.es) through the project ALM/09/018 and by the European Union through the “European Energy Programme for Recovery” and the Compostilla OXYCFB300 project. We also want to acknowledge the financial support received from the ‘MUSTANG’ (www.co2mustang.eu) and ‘PANACEA’ (www.panacea-co2.org) projects (from the European Community's Seventh Framework Programme FP7/2007–2013 under grant agreements nos. 227286 and 282900, respectively)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydromechanical characterization of CO2 injection sites

  • Vilarrasa, Víctor
  • Carrera, Jesús
  • Olivella, Sebastià
Clear understanding of coupled hydromechanical effects, such as ground deformation, induced microseismicity and fault reactivation, will be crucial to convince the public that geologic carbon storage is secure. These effects depend on hydromechanical properties, which are usually determined at metric scale. However, their value at the field scale may differ in orders of magnitude. To address this shortcoming, we propose a hydromechanical characterization test to estimate the hydromechanical properties of the aquifer and caprock at the field scale. We propose injecting water at high pressure and, possibly, low temperature while monitoring fluid pressure and rock deformation. Here, we analyze the problem and perform numerical simulations and a dimensional analysis of the hydromechanical equations to obtain curves for overpressure and vertical displacement as a function of the volumetric strain term. We find that these curves do not depend much on the Poisson ratio, except for the dimensionless vertical displacement at the top of the caprock, which does. We can then estimate the values of the Young's modulus and the Poisson ratio of the aquifer and the caprock by introducing field measurements in these plots. Hydraulic parameters can be determined from the interpretation of fluid pressure evolution in the aquifer. Reverse-water level fluctuations are observed, i.e. fluid pressure drops in the caprock as a result of the induced deformation that undergoes the aquifer-caprock system when injecting in the aquifer. We find that induced microseismicity is more likely to occur in the aquifer than in the caprock and depends little on their stiffness. Monitoring microseismicity is a useful tool to track the opening of fractures. The propagation pattern depends on the stress regime, i.e. normal, strike slip or reverse faulting. The onset of microseismicity in the caprock can be used to define the maximum sustainable injection pressure to ensure a permanent CO2 storage., This work has been funded by Fundación Ciudad de la Energía (Spanish Government) (www.ciuden.es) through the project ALM/09/018 and by the European Union through the “European Energy Programme for Recovery” and the Compostilla OXYCFB300 project. We also want to acknowledge the financial support received from the ‘MUSTANG’ (www.co2mustang.eu) and ‘PANACEA’ (www.panacea-co2.org) projects (from the European Community's Seventh Framework Programme FP7/2007-2013 under grant agreements n° 227286 and n° 282900, respectively)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Use of hydraulic tests to identify the residual CO2 saturation at a geological storage site

  • Martínez Landa, Lurdes
  • Rötting, Tobias
  • Carrera, Jesús
  • Russian, Anna
  • Dentz, Marco
  • Cubillo, Bruno
Estimating long term capillary trapping of CO2 in aquifers remains a key challenge for CO2 storage. Zhang et al. (2011) proposed a combination of thermal, tracer, and hydraulic experiments to estimate the amount of CO2 trapped in the formation after a CO2 push and pull test. Of these three types of experiments, hydraulic tests are the simplest to perform and possibly the most informative. However, their potential has not yet been fully exploited. Here, we present a methodology to interpret these tests and analyze which parameters can be estimated. We use numerical and analytical solutions to a continuous injection in a medium where residual CO2 has caused a reduction in hydraulic conductivity and an increase in storage coefficient over a finite thickness (a few meters) skin around the injection well. We interpret the model results using conventional pressure buildup and diagnostic plots as well as the Agarwal (1980) recovery plots. We find that both skin hydraulic conductivity and storage coefficient (and thus residual CO2 saturation) can be obtained from the water injection test provided that water flow rate is carefully controlled and head buildup is measured with high frequency at the beginning of the test. © 2013 Elsevier Ltd., This work has been funded by Fundación Ciudad de la Energía (Spanish Government, www.ciuden.es) and by the European Union through the “European Energy Programme for Recovery” and the Compostilla OXYCFB300 project. We also want to acknowledge the financial support received from the ‘MUSTANG’ project (from the European Community's Seventh Framework Programme FP7/2007–2013 under grant agreement no. 227286; www.co2mustang.eu)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A method for incorporating equilibrium chemical reactions into multiphase flow models for CO2 storage

  • Saaltink, Maarten W.
  • Vilarrasa, Víctor
  • De Gaspari, F.
  • Silva, Orlando
  • Carrera, Jesús
  • Rötting, Tobias
CO2 injection and storage in deep saline aquifers involves many coupled processes, including multiphase flow, heat and mass transport, rock deformation and mineral precipitation and dissolution. Coupling is especially critical in carbonate aquifers, where minerals will tend to dissolve in response to the dissolution of CO2 into the brine. The resulting neutralization will drive further dissolution of both CO2 and calcite. This suggests that large cavities may be formed and that proper simulation may require full coupling of reactive transport and multiphase flow. We show that solving the latter may suffice whenever two requirements are met: (1) all reactions can be assumed to occur in equilibrium and (2) the chemical system can be calculated as a function of the state variables of the multiphase flow model (i.e., liquid and gas pressure, and temperature). We redefine the components of multiphase flow codes (traditionally, water and CO2), so that they are conservative for all reactions of the chemical system. This requires modifying the traditional constitutive relationships of the multiphase flow codes, but yields the concentrations of all species and all reaction rates by simply performing speciation and mass balance calculations at the end of each time step. We applied this method to the H2O-CO2-Na-Cl-CaCO3 system, so as to model CO2 injection into a carbonate aquifer containing brine. Results were very similar to those obtained with traditional formulations, which implies that full coupling of reactive transport and multi-phase flow is not really needed for this kind of systems, but the resulting simplifications may make it advisable even for cases where the above requirements are not met. Regarding the behavior of carbonate rocks, we find that porosity development near the injection well is small because of the low solubility of calcite. Moreover, dissolution concentrates at the front of the advancing CO2 plume because the brine below the plume tends to reach high CO2 concentrations quite rapidly. We conclude that carbonate dissolution needs not to be feared. © 2013 Elsevier Ltd., This work was supported by the European Commission through the MUSTANG and the PANACEA projects (Seventh Framework Programme FP7/2007-2013 under Grant agreements nos. 227286 and 282900, respectively). We also want to acknowledge the financial support received from Instituto para la Diversificación y Ahorro de la Energía (IDAE, Spanish Government) and by the European Union through the “European Energy Programme for Recovery” and the Compostilla OXYCFB300 project., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Role of salt sources in density-dependent flow

  • Hidalgo, Juan J.
  • Carrera, Jesús
  • Medina, Agustín
Flow equation expresses mass conservation for a fluid phase. In density-dependent problems, fluid consists of at least two components, termed salt and water here. Salt sources are usually properly accounted for when salt is dissolved in water (i.e., as a solute) but are neglected otherwise. An analysis of the effect of neglecting pure salt sources on flow regime and concentration distribution is performed. Two test cases are used to illustrate the issue. The first one is the saltwater bucket problem, which consists of adding salt to an otherwise isolated domain. The second one is the Elder problem. Discrepancies in concentrations are moderate for reasonably small salt mass fractions. However, currently available codes yield head drops in response to the addition of salt because fluid mass is kept constant while its density increases. Such results contradict basic physical principles and lead to an inversion in the flow direction. Copyright 2009 by the American Geophysical Union., The authors gratefully acknowledge financial support of the Spanish Ministry of Science and Innovation (MICINN) through the PSE-CO2 project (PSE-120000-2007-6) of the Spanish government through the Fundación Ciudad de la Energía–CIUDEN and the European Union through project MUSTANG (FP7-ENERGY-2008-1, project -227286). The work of Juan J. Hidalgo was supported by the Spanish Ministry of Education and Science in the frame of the UAs-CSIC collaboration program., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Use of hydraulic tests to identify the residual CO2 saturation at a geological storage site

  • Martínez Landa, Lourdes|||0000-0002-4823-9892
  • Roetting, Tobias Stefan|||0000-0001-7675-3541
  • Carrera Ramírez, Jesús|||0000-0002-8054-4352
  • Russian, Anna
  • Dentz, Marco|||0000-0002-3940-282X
  • Cubillo, Bruno
Estimating long term capillary trapping of CO2 in aquifers remains a key challenge for CO2 storage. Zhang etal, (2011) proposed a combination of thermal, tracer, and hydraulic experiments to estimate the amount of CO2 trapped in the formation after a CO2 push and pull test. Of these three types of experiments, hydraulic tests are the simplest to perform and possibly the most informative. However, their potential has not yet been fully exploited. Here, we present a methodology to interpret these tests and analyze which parameters can be estimated. We use numerical and analytical solutions to a continuous injection in a medium where residual CO2 has caused a reduction in hydraulic conductivity and an increase in storage coefficient over a finite thickness (a few meters) skin around the injection well. We interpret the model results using conventional pressure buildup and diagnostic plots as well as the Agatwal (1980) recovery plots. We find that both skin hydraulic conductivity and storage coefficient (and thus residual CO2 saturation) can be obtained from the water injection test provided that water flow rate is carefully controlled and head buildup is measured with high frequency at the beginning of the test. (C) 2013 Elsevier Ltd. All rights reserved., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Semianalytical solution for CO2 plume shape and pressure evolution during CO2 injection in deep saline formations

  • Vilarrasa Riaño, Víctor|||0000-0003-1169-4469
  • Carrera Ramírez, Jesús|||0000-0002-8054-4352
  • Bolster, Diogo
  • Dentz, Marco|||0000-0002-3940-282X
The injection of supercritical carbon dioxide (CO2) in deep saline aquifers leads to the formation of a CO2 rich phase plume that tends to float over the resident brine. As pressure builds up, CO2 density will increase because of its high compressibility. Current analytical solutions do not account for CO2 compressibility and consider a volumetric injection rate that is uniformly distributed along the whole thickness of the aquifer, which is unrealistic. Furthermore, the slope of the CO2 pressure with respect to the logarithm of distance obtained from these solutions differs from that of numerical solutions. We develop a semianalytical solution for the CO2 plume geometry and fluid pressure evolution, accounting for CO2 compressibility and buoyancy effects in the injection well, so CO2 is not uniformly injected along the aquifer thickness. We formulate the problem in terms of a CO2 potential that facilitates solution in horizontal layers, with which we discretize the aquifer. Capillary pressure is considered at the interface between the CO2 rich phase and the aqueous phase. When a prescribed CO2 mass flow rate is injected, CO2 advances initially through the top portion of the aquifer. As CO2 is being injected, the CO2 plume advances not only laterally, but also vertically downwards. However, the CO2 plume does not necessarily occupy the whole thickness of the aquifer. We found that even in the cases in which the CO2 plume reaches the bottom of the aquifer, most of the injected CO2 enters the aquifer through the layers at the top. Both CO2 plume position and fluid pressure compare well with numerical simulations. This solution permits quick evaluations of the CO2 plume position and fluid pressure distribution when injecting supercritical CO2 in a deep saline aquifer., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Geomechanical stability of the caprock during CO2 sequestration in deep saline aquifers

  • Vilarrasa Riaño, Víctor|||0000-0003-1169-4469
  • Olivella Pastallé, Sebastià|||0000-0003-3976-4027
  • Carrera Ramírez, Jesús|||0000-0002-8054-4352
Sequestration of carbon dioxide (CO2) in deep saline aquifers has emerged as a mitigation strategy for reducing greenhouse gas emissions to the atmosphere. The large amounts of supercritical CO2 that need to be injected into deep saline aquifers may cause large fluid pressure buildup. The resulting overpressure will produce changes in the effective stress field. This will deform the rock and may promote reactivation of sealed fractures or the creation of new ones in the caprock seal, which could lead to escape paths for CO2. To understand these coupled hydromechanical phenomena, we model an axisymmetric horizontal aquifer-caprock system. We study plastic strain propagation patterns using a viscoplastic approach. Simulations illustrate that plastic strain may propagate through the whole thickness of the caprock if horizontal stress is lower than vertical stress. In contrast, plastic strain concentrates in the contact between the aquifer and the caprock if horizontal stress is larger than vertical stress. Aquifers that present a low-permeability boundary experience an additional fluid pressure increase once the pressure buildup cone reaches the outer boundary. However, fluid pressure does not evolve uniformly in the aquifer. While it increases in the low-permeability boundary, it drops in the vicinity of the injection well because of the lower viscosity of CO2. Thus, caprock stability does not get worse in semi-closed aquifers compared to open aquifers. Overall, the caprock acts as a plate that bends because of pressure buildup, producing a horizontal extension of the upper part of the caprock. This implies a vertical compression of this zone, which may produce settlements instead of uplift in low-permeability (k≤10-18 m2) caprocks at early times of injection., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Semianalytical solution for CO2 plume shape and pressure evolution during CO2 injection in deep saline formations

  • Vilarrasa Riaño, Víctor
  • Carrera Ramírez, Jesús
  • Bolster, Diogo
  • Dentz, Marco
The injection of supercritical carbon dioxide (CO2) in deep saline aquifers leads to the formation of a CO2 rich phase plume that tends to float over the resident brine. As pressure builds up, CO2 density will increase because of its high compressibility. Current analytical solutions do not account for CO2 compressibility and consider a volumetric injection rate that is uniformly distributed along the whole thickness of the aquifer, which is unrealistic. Furthermore, the slope of the CO2 pressure with respect to the logarithm of distance obtained from these solutions differs from that of numerical solutions. We develop a semianalytical solution for the CO2 plume geometry and fluid pressure evolution, accounting for CO2 compressibility and buoyancy effects in the injection well, so CO2 is not uniformly injected along the aquifer thickness. We formulate the problem in terms of a CO2 potential that facilitates solution in horizontal layers, with which we discretize the aquifer. Capillary pressure is considered at the interface between the CO2 rich phase and the aqueous phase. When a prescribed CO2 mass flow rate is injected, CO2 advances initially through the top portion of the aquifer. As CO2 is being injected, the CO2 plume advances not only laterally, but also vertically downwards. However, the CO2 plume does not necessarily occupy the whole thickness of the aquifer. We found that even in the cases in which the CO2 plume reaches the bottom of the aquifer, most of the injected CO2 enters the aquifer through the layers at the top. Both CO2 plume position and fluid pressure compare well with numerical simulations. This solution permits quick evaluations of the CO2 plume position and fluid pressure distribution when injecting supercritical CO2 in a deep saline aquifer., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Use of hydraulic tests to identify the residual CO2 saturation at a geological storage site

  • Martínez Landa, Lourdes
  • Roetting, Tobias Stefan
  • Carrera Ramírez, Jesús
  • Russian, Anna
  • Dentz, Marco
  • Cubillo, Bruno
Estimating long term capillary trapping of CO2 in aquifers remains a key challenge for CO2 storage. Zhang etal, (2011) proposed a combination of thermal, tracer, and hydraulic experiments to estimate the amount of CO2 trapped in the formation after a CO2 push and pull test. Of these three types of experiments, hydraulic tests are the simplest to perform and possibly the most informative. However, their potential has not yet been fully exploited. Here, we present a methodology to interpret these tests and analyze which parameters can be estimated. We use numerical and analytical solutions to a continuous injection in a medium where residual CO2 has caused a reduction in hydraulic conductivity and an increase in storage coefficient over a finite thickness (a few meters) skin around the injection well. We interpret the model results using conventional pressure buildup and diagnostic plots as well as the Agatwal (1980) recovery plots. We find that both skin hydraulic conductivity and storage coefficient (and thus residual CO2 saturation) can be obtained from the water injection test provided that water flow rate is carefully controlled and head buildup is measured with high frequency at the beginning of the test. (C) 2013 Elsevier Ltd. All rights reserved., Peer Reviewed, Postprint (author’s final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Geomechanical stability of the caprock during CO2 sequestration in deep saline aquifers

  • Vilarrasa Riaño, Víctor
  • Olivella Pastallé, Sebastià
  • Carrera Ramírez, Jesús
Sequestration of carbon dioxide (CO2) in deep saline aquifers has emerged as a mitigation strategy for reducing greenhouse gas emissions to the atmosphere. The large amounts of supercritical CO2 that need to be injected into deep saline aquifers may cause large fluid pressure buildup. The resulting overpressure will produce changes in the effective stress field. This will deform the rock and may promote reactivation of sealed fractures or the creation of new ones in the caprock seal, which could lead to escape paths for CO2. To understand these coupled hydromechanical phenomena, we model an axisymmetric horizontal aquifer-caprock system. We study plastic strain propagation patterns using a viscoplastic approach. Simulations illustrate that plastic strain may propagate through the whole thickness of the caprock if horizontal stress is lower than vertical stress. In contrast, plastic strain concentrates in the contact between the aquifer and the caprock if horizontal stress is larger than vertical stress. Aquifers that present a low-permeability boundary experience an additional fluid pressure increase once the pressure buildup cone reaches the outer boundary. However, fluid pressure does not evolve uniformly in the aquifer. While it increases in the low-permeability boundary, it drops in the vicinity of the injection well because of the lower viscosity of CO2. Thus, caprock stability does not get worse in semi-closed aquifers compared to open aquifers. Overall, the caprock acts as a plate that bends because of pressure buildup, producing a horizontal extension of the upper part of the caprock. This implies a vertical compression of this zone, which may produce settlements instead of uplift in low-permeability (k≤10-18 m2) caprocks at early times of injection., Peer Reviewed, Preprint