Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of 1-octanethiol as an electrolyte additive on the performance of the iron-air battery electrodes

  • McKerracher, Rachel
  • Figueredo-Rodríguez, H. A.
  • Dimogiannis, K.
  • Alegre Gresa, Cinthia
  • Villanueva, Nicolás
  • Lázaro Elorri, María Jesús
  • Baglio, Vincenzo
  • Aricò, Antonino Salvatore
  • Ponce de León, Carlos
4 figures, It has recently been established that 1-octanethiol in the electrolyte can allow iron electrodes to be discharged at higher rates. However, the effect of thiol additives on the air electrode has not yet been studied. The effect of solvated thiols on the surface positive electrode reaction is of prime importance if these are to be used in an iron-air battery. This work shows that the air-electrode catalyst is poisoned by the presence of octanethiol, with the oxygen reduction overpotential at the air electrode increasing with time of exposure to the solution and increased 1-octanethiol concentration in the range 0–0.1 mol dm−3. Post-mortem XPS analyses were performed over the used air electrodes suggesting the adsorption of sulphur species over the catalyst surface, reducing its performance. Therefore, although sulphur-based additives may be suitable for nickel-iron batteries, they are not recommended for iron-air batteries except in concentrations well below 10 × 10−3 mol dm−3., This work was enabled by an EU grant FP7 (NECOBAUT grant agreement no. 314159). H.A.F-R. acknowledges financial support from CONACYT, Mexico. CNR-ITAE authors acknowledge funding from the “Accordo di Programma CNR-MiSE, Gruppo tematico Sistema Elettrico Nazionale – Progetto: Sistemi elettrochimici per l’accumulo di energia”. C.A. thanks the Short-Term Mobility project of CNR and for her Juan de la Cierva contract (FJCI-2015-25560). The authors also acknowledge financial support given by Aragon Government to the Fuel Conversion Group (T06_17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improving the stability and discharge capacity of nanostructured Fe2O3/C anodes for iron-air batteries and investigation of 1-octhanethiol as an electrolyte additive

  • McKerracher, Rachel
  • Figueredo-Rodríguez, H. A.
  • Alegre Gresa, Cinthia
  • Aricò, Antonino Salvatore
  • Baglio, Vincenzo
  • Ponce de León, Carlos
9 figures, 4 tables.-- Supplementary information available.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/, Iron-based aqueous batteries, such as the iron-air and nickel-iron chemistries, are limited by passivation and hydrogen evolution at the iron anode, especially at high current densities. In this paper, strategies to minimise these issues are investigated with iron electrodes composed of 20–50 nm Fe2O3 nanoparticles produced by the Adams and Oxalate methods. The strategies include ball milling the Fe2O3 with Ketjenblack carbon to improve conductivity, addition of bismuth sulphide to the electrode and 1-octanethiol to the electrolyte, and addition of potassium carbonate as a pore-forming agent. The ratio of Fe/C in the electrode and the 1-octanethiol additive have the greatest impact on the electrode capacity. The Fe/C ratio should be below 2.0 to ensure conductivity of the discharged electrode. The presence of 1-octanethiol can protect the electrodes from passivation during discharge; at very high 2C discharge rates adding 1-octanethiol increases the electrode specific capacity from 17 to 171 mAh/gFe. The synthesis method and use of pore former do not have a significant effect on the capacity. In all electrodes, the Fe2O3 nanoparticles are in the same crystalline phase after cycling and do not undergo significant crystal growth and passivation, demonstrating the stability and suitability of these materials for iron-based batteries., This work was enabled by an EU grant FP7 (NECOBAUT grant agreement no. 314159). H.A.F-R. acknowledges financial support from CONACYT, Mexico. CNR-ITAE authors acknowledge funding from the “Accordo di Programma CNR-MiSE, Gruppo tematico Sistema Elettrico Nazionale – Progetto: Sistemi elettrochimici per l'accumulo di energia”. C.A. thanks the Short-Term Mobility project of CNR., Peer reviewed