Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Calibration of an outdoor distributed camera network with a 3D point cloud

  • Ortega, Agustín
  • Silva, Manuel
  • Teniente, Ernesto H.
  • Ferreira, Ricardo
  • Bernardino, Alexandre
  • Gaspar, José
  • Andrade-Cetto, Juan
This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution license., Outdoor camera networks are becoming ubiquitous in critical urban areas of the largest cities around the world. Although current applications of camera networks are mostly tailored to video surveillance, recent research projects are exploiting their use to aid robotic systems in people-assisting tasks. Such systems require precise calibration of the internal and external parameters of the distributed camera network. Despite the fact that camera calibration has been an extensively studied topic, the development of practical methods for user-assisted calibration that minimize user intervention time and maximize precision still pose significant challenges. These camera systems have non-overlapping fields of view, are subject to environmental stress, and are likely to suffer frequent recalibration. In this paper, we propose the use of a 3D map covering the area to support the calibration process and develop an automated method that allows quick and precise calibration of a large camera network. We present two cases of study of the proposed calibration method: one is the calibration of the Barcelona Robot Lab camera network, which also includes direct mappings (homographies) between image coordinates and world points in the ground plane (walking areas) to support person and robot detection and localization algorithms. The second case consist of improving the GPS positioning of geo-tagged images taken with a mobile device in the Facultat de Matemàtiques i Estadística (FME) patio at the Universitat Politècnica de Catalunya (UPC)., Agustín Ortega and Ernesto H. Teniente acknowledge support from the Mexican Council of Science and Technology. This work received support from the Agència de Gestiò d’Ajuts Universitaris i de Recerca of The Generalitat of Catalonia (2012 CTP00013), the Spanish Ministry of Economy and Competitiveness, project PAU+: Perception and Action in Robotics Problems with Large State Spaces (DPI-2011-27510), the EU project, Cargo-ANTs: Cargo Handling by Automated Next Generation Transportation Systems for Ports and Terminals (FP7-SST-2013-RTD-1 605598), the Portuguese Science Foundation FCT project DCCAL: Discrete Cameras Calibration using Properties of Natural Scenes (PTDC/EEACRO/105413/2008), and the Portuguese Quadro de Referéncia Estratégico Nacional project HDA: High Definition Analytics (QREN I&D em Co-Promoção 13750)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dense entropy decrease estimation for mobile robot exploration

  • Vallvé, Joan
  • Andrade-Cetto, Juan
Presentado al ICRA 2014 celebrado en Hong Kong del 31 de mayo al 7 de junio., We propose a method for the computation of entropy decrease in C-space. These estimates are then used to evaluate candidate exploratory trajectories in the context of autonomous mobile robot mapping. The method evaluates both map and path entropy reduction and uses such estimates to compute trajectories that maximize coverage whilst min- imizing localization uncertainty, hence reducing map error. Very efficient kernel convolution mechanisms are used to evaluate entropy reduction at each sensor ray, and for each possible robot position and orientation, taking frontiers and obstacles into account. In contrast to most other exploration methods that evaluate entropy reduction at a small number of discrete robot configurations, we do it densely for the entire C-space. The computation of such dense entropy reduction maps opens the window to new exploratory strategies. In this paper we present two such strategies. In the first one we drive exploration through a gradient descent on the entropy decrease field. The second strategy chooses maximal entropy reduction configurations as candidate exploration goals, and plans paths to them using RRT*. Both methods use PoseSLAM as their estimation backbone, and are tested and compared with classical frontier-based exploration in simulations using common publicly available datasets., This work has been supported by the Spanish Ministry of Economy and Competitiveness under Project DPI-2011-27510 and by the EU Project CargoAnts FP7-605598., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Localization in highly dynamic environments using dual-timescale NDT-MCL

  • Valencia, Rafael
  • Saarinen, Jari
  • Andreasson, Henrik
  • Vallvé, Joan
  • Andrade-Cetto, Juan
  • Lilienthal, Achim J.
Industrial environments are rarely static and often their configuration is continuously changing due to the material transfer flow. This is a major challenge for infrastructure free localization systems. In this paper we address this challenge by introducing a localization approach that uses a dual- timescale approach. The proposed approach - Dual-Timescale Normal Distributions Transform Monte Carlo Localization (DT- NDT-MCL) - is a particle filter based localization method, which simultaneously keeps track of the pose using an apriori known static map and a short-term map. The short-term map is continuously updated and uses Normal Distributions Transform Occupancy maps to maintain the current state of the environment. A key novelty of this approach is that it does not have to select an entire timescale map but rather use the best timescale locally. The approach has real-time performance and is evaluated using three datasets with increasing levels of dynamics. We compare our approach against previously pro- posed NDT-MCL and commonly used SLAM algorithms and show that DT-NDT-MCL outperforms competing algorithms with regards to accuracy in all three test cases., This work has been supported by the European Commission under contract number FP7-ICT-600877 (SPENCER) and by the Spanish Ministry of Economy and Competitiveness under Project DPI-2011-27510 and the EU Project CargoAnts FP7-605598., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Uncertainty analysis of the DLT-Lines calibration algorithm for cameras with radial distortion

  • Galego, Ricardo
  • Ortega, Agustín
  • Ferreira, Ricardo
  • Bernardino, Alexandre
  • Andrade-Cetto, Juan
  • Gaspar, José
3D metric data of environmental structures is nowadays present in many information sources (maps, GIS) and can be easily acquired with modern depth sensing technology (RGBD, laser). This wealth of information can be readily used for single view calibration of 2D cameras with radial distortion, provided that image structures can be matched with the 3D data. In this paper we present an analysis of the level of accuracy that can be obtained when such calibration is performed with the 2D-3D DLT-Lines algorithm. The analysis propagates uncertainty in the detection of features at the image level to camera pose, and from there to 3D reconstruction. The analytic error propagation expressions are derived using first order uncertainty models, and are validated with Monte Carlo simulations in a virtual indoor environment. The method is general and can be applied to other calibration methods, as long as explicit or implicit expressions can be derived for the transformation from image coordinates to 3D reconstruction. We present results with real data for two applications: i) the 3D reconstruction of an outdoors building for which 3D information is given by a map, observed by a mobile phone camera; and ii) the uncertainty in the localization at the floor plane of points observed by a fixed camera calibrated by a robot equipped with an RGBD camera navigating in a typical indoor environment., This work has been partially supported by the FCT project [UID/EEA/50009/2013], by the MINECO project DPI2011-27510, and by the EU Projects POETICON++EU-FP7-ICT-288382 and Cargo-ANTs FP7-SST-605598., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Terrain classification in complex three-dimensional outdoor environments

  • Santamaria-Navarro, Àngel
  • Teniente, Ernesto H.
  • Morta, Martí
  • Andrade-Cetto, Juan
This paper presents two techniques to detect and classify navigable terrain in complex three-dimensional (3D) environments. The first method is a low level on-line mechanism aimed at detecting obstacles and holes at a fast frame rate using a time-of-flight camera as the main sensor. The second technique is a high-level offline classification mechanism that learns traversable regions from larger 3D point clouds acquired with a laser range scanner. We approach the problem using Gaussian processes as a regression tool, in which the terrain parameters are learned, and also for classification, using samples from traversed areas to build the traversable terrain class. The two methods are compared against unsupervised classification, and sample trajectories are generated in the classified areas using a nonholonomic path planner. We show results of both the low-level and the high-level terrain classification approaches in simulations and in real-time navigation experiments using a Segway RMP400 robot., This work has been partially funded by the Spanish Ministry of Economy and Competitiveness under project PAU+ DPI2011-27510 and by the EU projects ARCAS FP7-287617 and Cargo-ANTs FP7-605598, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Potential information fields for mobile robot exploration

  • Vallvé, Joan
  • Andrade-Cetto, Juan
We present a decision theoretic approach to mobile robot exploration. The method evaluates the reduction of joint path and map entropy and computes a potential information field in robot configuration space using these joint entropy reduction estimates. The exploration trajectory is computed descending on the gradient of this field. The technique uses Pose SLAM as its estimation backbone. Very efficient kernel convolution mechanisms are used to evaluate entropy reduction for each sensor ray, and for each possible robot orientation, taking frontiers and obstacles into account. In the end, the computation of this field on the entire configuration space is shown to be very efficient. The approach is tested in simulations in a pair of publicly available datasets comparing favorably both in quality of estimates and in execution time against an RRT∗-based search for the nearest frontier and also against a locally optimal exploration strategy., This work has been supported by the Spanish Ministry of Economy and Competitiveness under Project DPI-2011-27510 and by the EU Project CargoANTs FP7-605598., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chromatic shadow detection and tracking for moving foreground segmentation

  • Huerta, Iván
  • Holte, Michael B.
  • Moeslund, Thomas B.
  • Gonzàlez, Jordi
Advanced segmentation techniques in the surveillance domain deal with shadows to avoid distortions when detecting moving objects. Most approaches for shadow detection are still typically restricted to penumbra shadows and cannot cope well with umbra shadows. Consequently, umbra shadow regions are usually detected as part of moving objects, thus affecting the performance of the final detection. In this paper we address the detection of both penumbra and umbra shadow regions. First, a novel bottom-up approach is presented based on gradient and colour models, which successfully discriminates between chromatic moving cast shadow regions and those regions detected as moving objects. In essence, those regions corresponding to potential shadows are detected based on edge partitioning and colour statistics. Subsequently (i) temporal similarities between textures and (ii) spatial similarities between chrominance angle and brightness distortions are analysed for each potential shadow region for detecting the umbra shadow regions. Our second contribution refines even further the segmentation results: a tracking-based top-down approach increases the performance of our bottom-up chromatic shadow detection algorithm by properly correcting non-detected shadows. To do so, a combination of motion filters in a data association framework exploits the temporal consistency between objects and shadows to increase the shadow detection rate. Experimental results exceed current state-of-the-art in shadow accuracy for multiple well-known surveillance image databases which contain different shadowed materials and illumination conditions., This work has been partially funded by the European project CargoANTs (FP7-SST-2013-605598), by the Spanish CICYT project DPI2013-42458-P and by the CICYT TIN2012-39051., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust and Real-Time Detection and Tracking of Moving Objects with Minimum 2D LiDAR Information to Advance Autonomous Cargo Handling in Ports

  • Vaquero, Victor
  • Repiso, Ely
  • Sanfeliu, Alberto
Detecting and tracking moving objects (DATMO) is an essential component for autonomous driving and transportation. In this paper, we present a computationally low-cost and robust DATMO system which uses as input only 2D laser rangefinder (LRF) information. Due to its low requirements both in sensor needs and computation, our DATMO algorithm is meant to be used in current Autonomous Guided Vehicles (AGVs) to improve their reliability for the cargo transportation tasks at port terminals, advancing towards the next generation of fully autonomous transportation vehicles. Our method follows a Detection plus Tracking paradigm. In the detection step we exploit the minimum information of 2D-LRFs by segmenting the elements of the scene in a model-free way and performing a fast object matching to pair segmented elements from two different scans. In this way, we easily recognize dynamic objects and thus reduce consistently by between two and five times the computational burden of the adjacent tracking method. We track the final dynamic objects with an improved Multiple-Hypothesis Tracking (MHT), to which special functions for filtering, confirming, holding, and deleting targets have been included. The full system is evaluated in simulated and real scenarios producing solid results. Specifically, a simulated port environment has been developed to gather realistic data of common autonomous transportation situations such as observing an intersection, joining vehicle platoons, and perceiving overtaking maneuvers. We use different sensor configurations to demonstrate the robustness and adaptability of our approach. We additionally evaluate our system with real data collected in a port terminal the Netherlands. We show that it is able to accomplish the vehicle following task successfully, obtaining a total system recall of more than 98% while running faster than 30 Hz, This work has been partly funded by the EU project CargoANTs FP7-SST-2013-605598, the Spanish MINECO projects DPI2016-78957-R (AEI/FEDER EU) and Unidad de Excelencia Maria de Maeztu 2016 (MDM-2016-0656)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Uncertainty analysis of the DLT-Lines calibration algorithm for cameras with radial distortion

  • Galego, Ricardo
  • Ortega, Agustin
  • Ferreira, Ricardo
  • Bernardino, Alexandre
  • Andrade-Cetto, Juan|||0000-0002-6354-8941
  • Gaspar, José
3D metric data of environmental structures is nowadays present in many information sources (maps, GIS) and can be easily acquired with modern depth sensing technology (RGBD, laser). This wealth of information can be readily used for single view calibration of 2D cameras with radial distortion, provided that image structures can be matched with the 3D data. In this paper we present an analysis of the level of accuracy that can be obtained when such calibration is performed with the 2D-3D DLT-Lines algorithm. The analysis propagates uncertainty in the detection of features at the image level to camera pose, and from there to 3D reconstruction. The analytic error propagation expressions are derived using first order uncertainty models, and are validated with Monte Carlo simulations in a virtual indoor environment. The method is general and can be applied to other calibration methods, as long as explicit or implicit expressions can be derived for the transformation from image coordinates to 3D reconstruction. We present results with real data for two applications: i) the 3D reconstruction of an outdoors building for which 3D information is given by a map, observed by a mobile phone camera: and ii) the uncertainty in the localization at the floor plane of points observed by a fixed camera calibrated by a robot equipped with an RGBD camera navigating in a typical indoor environment. (C) 2015 Elsevier Inc. All rights reserved., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Terrain classification in complex three-dimensional outdoor environments

  • Santamaria Navarro, Àngel|||0000-0002-6328-1423
  • Teniente Avilés, Ernesto Homar
  • Morta Garriga, Martí
  • Andrade-Cetto, Juan|||0000-0002-6354-8941
This paper presents two techniques to detect and classify navigable terrain in complex three-dimensional (3D) environments. The first method is a low level on-line mechanism aimed at detecting obstacles and holes at a fast frame rate using a time-of-flight camera as the main sensor. The second technique is a high-level offline classification mechanism that learns traversable regions from larger 3D point clouds acquired with a laser range scanner. We approach the problem using Gaussian processes as a regression tool, in which the terrain parameters are learned, and also for classification, using samples from traversed areas to build the traversable terrain class. The two methods are compared against unsupervised classification, and sample trajectories are generated in the classified areas using a nonholonomic path planner. We show results of both the low-level and the high-level terrain classification approaches in simulations and in real-time navigation experiments using a Segway RMP400 robot. (C) 2014 Wiley Periodicals, Inc., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Calibration of an outdoor distributed camera network with a 3D point cloud

  • Ortega, Agustin
  • Silva, Manuel
  • Teniente Avilés, Ernesto Homar
  • Ferreira, Ricardo
  • Bernardino Bernardino Malheiro, Alexandre José
  • Gaspar, José
  • Andrade-Cetto, Juan|||0000-0002-6354-8941
Outdoor camera networks are becoming ubiquitous in critical urban areas of the largest cities around the world. Although current applications of camera networks are mostly tailored to video surveillance, recent research projects are exploiting their use to aid robotic systems in people-assisting tasks. Such systems require precise calibration of the internal and external parameters of the distributed camera network. Despite the fact that camera calibration has been an extensively studied topic, the development of practical methods for user-assisted calibration that minimize user intervention time and maximize precision still pose significant challenges. These camera systems have non-overlapping fields of view, are subject to environmental stress, and are likely to suffer frequent recalibration. In this paper, we propose the use of a 3D map covering the area to support the calibration process and develop an automated method that allows quick and precise calibration of a large camera network. We present two cases of study of the proposed calibration method: one is the calibration of the Barcelona Robot Lab camera network, which also includes direct mappings (homographies) between image coordinates and world points in the ground plane (walking areas) to support person and robot detection and localization algorithms. The second case consist of improving the GPS positioning of geo-tagged images taken with a mobile device in the Facultat de Matematiques i Estadistica (FME) patio at the Universitat Politecnica de Catalunya (UPC)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Potential information fields for mobile robot exploration

  • Vallvé Navarro, Joan|||0000-0002-1029-356X
  • Andrade-Cetto, Juan|||0000-0002-6354-8941
We present a decision theoretic approach to mobile robot exploration. The method evaluates the reduction of joint path and map entropy and computes a potential information field in robot configuration space using these joint entropy reduction estimates. The exploration trajectory is computed descending on the gradient of this field. The technique uses Pose SLAM as its estimation backbone. Very efficient kernel convolution mechanisms are used to evaluate entropy reduction for each sensor ray, and for each possible robot orientation, taking frontiers and obstacles into account. In the end, the computation of this field on the entire configuration space is shown to be very efficient. The approach is tested in simulations in a pair of publicly available datasets comparing favorably both in quality of estimates and in execution time against an RRT*-based search for the nearest frontier and also against a locally optimal exploration strategy. (C) 2014 Elsevier B.V. All rights reserved., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Chromatic shadow detection and tracking for moving foreground segmentation

  • Huerta Casado, Iván
  • Holte, Michael B.
  • Moeslund, Thomas
  • Gonzàlez, Jordi
Advanced segmentation techniques in the surveillance domain deal with shadows to avoid distortions when detecting moving objects. Most approaches for shadow detection are still typically restricted to penumbra shadows and cannot cope well with umbra shadows. Consequently, umbra shadow regions are usually detected as part of moving objects, thus affecting the performance of the final detection. In this paper we address the detection of both penumbra and umbra shadow regions. First, a novel bottom-up approach is presented based on gradient and colour models, which successfully discriminates between chromatic moving cast shadow regions and those regions detected as moving objects. In essence, those regions corresponding to potential shadows are detected based on edge partitioning and colour statistics. Subsequently (i) temporal similarities between textures and (ii) spatial similarities between chrominance angle and brightness distortions are analysed for each potential shadow region for detecting the umbra shadow regions. Our second contribution refines even further the segmentation results: a tracking-based top-down approach increases the performance of our bottom-up chromatic shadow detection algorithm by properly correcting non-detected shadows. To do so, a combination of motion filters in a data association framework exploits the temporal consistency between objects and shadows to increase the shadow detection rate. Experimental results exceed current state-of-the-art in shadow accuracy for multiple well-known surveillance image databases which contain different shadowed materials and illumination conditions., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Potential information fields for mobile robot exploration

  • Vallvé Navarro, Joan
  • Andrade-Cetto, Juan
We present a decision theoretic approach to mobile robot exploration. The method evaluates the reduction of joint path and map entropy and computes a potential information field in robot configuration space using these joint entropy reduction estimates. The exploration trajectory is computed descending on the gradient of this field. The technique uses Pose SLAM as its estimation backbone. Very efficient kernel convolution mechanisms are used to evaluate entropy reduction for each sensor ray, and for each possible robot orientation, taking frontiers and obstacles into account. In the end, the computation of this field on the entire configuration space is shown to be very efficient. The approach is tested in simulations in a pair of publicly available datasets comparing favorably both in quality of estimates and in execution time against an RRT*-based search for the nearest frontier and also against a locally optimal exploration strategy. (C) 2014 Elsevier B.V. All rights reserved., Peer Reviewed, Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Uncertainty analysis of the DLT-Lines calibration algorithm for cameras with radial distortion

  • Galego, Ricardo
  • Ortega, Agustin
  • Ferreira, Ricardo
  • Bernardino, Alexandre
  • Andrade-Cetto, Juan
  • Gaspar, José
3D metric data of environmental structures is nowadays present in many information sources (maps, GIS) and can be easily acquired with modern depth sensing technology (RGBD, laser). This wealth of information can be readily used for single view calibration of 2D cameras with radial distortion, provided that image structures can be matched with the 3D data. In this paper we present an analysis of the level of accuracy that can be obtained when such calibration is performed with the 2D-3D DLT-Lines algorithm. The analysis propagates uncertainty in the detection of features at the image level to camera pose, and from there to 3D reconstruction. The analytic error propagation expressions are derived using first order uncertainty models, and are validated with Monte Carlo simulations in a virtual indoor environment. The method is general and can be applied to other calibration methods, as long as explicit or implicit expressions can be derived for the transformation from image coordinates to 3D reconstruction. We present results with real data for two applications: i) the 3D reconstruction of an outdoors building for which 3D information is given by a map, observed by a mobile phone camera: and ii) the uncertainty in the localization at the floor plane of points observed by a fixed camera calibrated by a robot equipped with an RGBD camera navigating in a typical indoor environment. (C) 2015 Elsevier Inc. All rights reserved., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Calibration of an outdoor distributed camera network with a 3D point cloud

  • Ortega, Agustin
  • Silva, Manuel
  • Teniente Avilés, Ernesto Homar
  • Ferreira, Ricardo
  • Bernardino Bernardino Malheiro, Alexandre José
  • Gaspar, José
  • Andrade-Cetto, Juan
Outdoor camera networks are becoming ubiquitous in critical urban areas of the largest cities around the world. Although current applications of camera networks are mostly tailored to video surveillance, recent research projects are exploiting their use to aid robotic systems in people-assisting tasks. Such systems require precise calibration of the internal and external parameters of the distributed camera network. Despite the fact that camera calibration has been an extensively studied topic, the development of practical methods for user-assisted calibration that minimize user intervention time and maximize precision still pose significant challenges. These camera systems have non-overlapping fields of view, are subject to environmental stress, and are likely to suffer frequent recalibration. In this paper, we propose the use of a 3D map covering the area to support the calibration process and develop an automated method that allows quick and precise calibration of a large camera network. We present two cases of study of the proposed calibration method: one is the calibration of the Barcelona Robot Lab camera network, which also includes direct mappings (homographies) between image coordinates and world points in the ground plane (walking areas) to support person and robot detection and localization algorithms. The second case consist of improving the GPS positioning of geo-tagged images taken with a mobile device in the Facultat de Matematiques i Estadistica (FME) patio at the Universitat Politecnica de Catalunya (UPC)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Terrain classification in complex three-dimensional outdoor environments

  • Santamaria Navarro, Àngel
  • Teniente Avilés, Ernesto Homar
  • Morta Garriga, Martí
  • Andrade-Cetto, Juan
This paper presents two techniques to detect and classify navigable terrain in complex three-dimensional (3D) environments. The first method is a low level on-line mechanism aimed at detecting obstacles and holes at a fast frame rate using a time-of-flight camera as the main sensor. The second technique is a high-level offline classification mechanism that learns traversable regions from larger 3D point clouds acquired with a laser range scanner. We approach the problem using Gaussian processes as a regression tool, in which the terrain parameters are learned, and also for classification, using samples from traversed areas to build the traversable terrain class. The two methods are compared against unsupervised classification, and sample trajectories are generated in the classified areas using a nonholonomic path planner. We show results of both the low-level and the high-level terrain classification approaches in simulations and in real-time navigation experiments using a Segway RMP400 robot. (C) 2014 Wiley Periodicals, Inc., Peer Reviewed, Postprint (author’s final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Chromatic shadow detection and tracking for moving foreground segmentation

  • Huerta Casado, Iván
  • Holte, Michael B.
  • Moeslund, Thomas
  • Gonzàlez, Jordi
Advanced segmentation techniques in the surveillance domain deal with shadows to avoid distortions when detecting moving objects. Most approaches for shadow detection are still typically restricted to penumbra shadows and cannot cope well with umbra shadows. Consequently, umbra shadow regions are usually detected as part of moving objects, thus affecting the performance of the final detection. In this paper we address the detection of both penumbra and umbra shadow regions. First, a novel bottom-up approach is presented based on gradient and colour models, which successfully discriminates between chromatic moving cast shadow regions and those regions detected as moving objects. In essence, those regions corresponding to potential shadows are detected based on edge partitioning and colour statistics. Subsequently (i) temporal similarities between textures and (ii) spatial similarities between chrominance angle and brightness distortions are analysed for each potential shadow region for detecting the umbra shadow regions. Our second contribution refines even further the segmentation results: a tracking-based top-down approach increases the performance of our bottom-up chromatic shadow detection algorithm by properly correcting non-detected shadows. To do so, a combination of motion filters in a data association framework exploits the temporal consistency between objects and shadows to increase the shadow detection rate. Experimental results exceed current state-of-the-art in shadow accuracy for multiple well-known surveillance image databases which contain different shadowed materials and illumination conditions., Peer Reviewed, Postprint (author's final draft)