Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

In situ synthesis of titanium alloy powders reinforced with nanoparticles for powder bed fusion: A step towards safer and more sustainable manufacturing

  • Portolés, Luis
  • Blasco-Puchades, José Ramón
  • Martín, José-Manuel
  • Burgos, Nerea
  • Borghetto, Marco
  • Zoz, Alexander
  • Ludwig, Norbert
  • Maccio, Tomaso
  • Marcos Martínez, María Dolores|||0000-0001-7079-8589
  • García Manrique, Juan Antonio|||0000-0001-9507-0746
  • Solano García, Lorenzo|||0000-0003-0535-314X
[EN] Additive manufacturing technologies for metallic materials based on powder bed fusion, either with electron (PBF-EB/M) or laser beam (PBF-LB/M) have enormous industrial potential. It is known that the reinforcement of nanoparticles in the metallic matrix improves the mechanical properties. This study presents a novel method for manufacturing reinforced powder particles for PBF technology. The method involves dispersing and dissolving reinforcing nanoparticles in the metallic matrix, resulting in a composite material. The method was applied to a Ti¿6Al¿4V matrix with SiC nanoparticles as reinforcement to develop a new Titanium Matrix Composite (TMC). A route for atomizing the composite material has been developed to scale up the process on an industrial level. The atomized material has been designed to be used as feedstock with PBF-EB/M and PBF-LB/M. The feedstock is a composite powder obtained by the Electrode Inert Gas Atomization (EIGA) process after mixing and dispersing SiC nanoparticles in the Ti¿6Al¿4V matrix and consolidating the mixture into an ingot bar using Hot Isostatic Pressing (HIP). The powder bed fusion process parameters have been studied to obtain specimens with a density greater than 99.9%, and close to 100% after HIP process. The conditions for some heat treatments, such as HIP and stress relief, have been determined. The conditions of machining processes, such as milling and turning, have been studied. The material¿s properties, such as chemical composition, microstructure, mechanical strength, and fatigue behavior have been evaluated. Compared to Ti¿6Al¿4V according to the ASTM F2924 standard, both the ultimate tensile strength and yield strength have been improved by 28%, and the elongation at break by between 30% and 60%. Regarding fatigue behavior, an increase of around 30¿50% (high-low cycles) has been observed., This study was carried out in the research project NANOTUN3D -Development of the complete workflow for producing and using a novel nanomodified Ti-based alloy for additive manufacturing in special applications , which was funded by European Commission with Grant Agreement ID: 685952. The publication of this article has been financed by the CDTI and the European Union - NextGenerationEU and supported by the Ministerio de Ciencia e Innovacion ¿ within the project "MADISON - MANUFACTURA ADITIVA, DIGITALIZACION ¿ Y SOSTENIBILIDAD", approved within the framework of the call Programa Cervera para Centros Tecnologicos ¿ 2023 with Grant Agreement EXP - 00163686 / CER-20231012.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Lab and Pilot-Scale Synthesis of MxOm@SiC Core-Shell Nanoparticles

  • Ribes, Àngela
  • Sánchez-Cabezas, Santiago
  • López-Tendero, María José
  • Pradas, Sarai
  • Cuenca-Bustos, Alejandro
  • Hernández-Montoto, Andy|||0000-0001-5623-9836
  • Villaescusa Alonso, Luis Angel|||0000-0002-2720-3217
  • Aznar, Elena|||0000-0003-0361-3876
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Marcos Martínez, María Dolores|||0000-0001-7079-8589
[EN] The addition of light ceramic particles to bulk technological materials as reinforcement to improve their mechanical properties has attracted increasing interest in the last years. The metal matrix composites obtained using nanoparticles have been reported to exhibit an improvement of their properties due to the decrease in the size of the ceramic additives to the nanoscale. Additionally, important effects such as the dispersion of the nanoparticles, wettability, and low reactivity can be controlled by the modification of the nanoparticles' surface. In this work, we present the preparation of core-shell MxOm@SiC nanoparticles with different shell compositions. The accurate and reproducible preparation is developed both at the lab and pilot scale. The synthesis of these core-shell nanoparticles and their scale-up production are fundamental steps for their industrial use as additives in metal matrix composites and alloys. Powder X-ray diffraction and energy dispersive X-ray (EDX) coupled with scanning transmission electron microscopy (STEM) are used to corroborate the formation of the core-shell systems, whereas line scan-EDX analysis allows measuring the average shell thickness., This research was funded as the NANOTUN3D project funded by EU Horizon 2020 Program for Research and Innovation under the grant agreement no685952. http://www.nanotun3d.eu.