Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Experimental investigation on sorption enhanced gasification (SEG) of biomass in a fluidized bed reactor for producing a tailored syngas

  • Martínez Berges, Isabel
  • Kulakova, Viktoria
  • Grasa Adiego, Gemma
  • Murillo Villuendas, Ramón
6 Figuras.- 3 Tablas, Synthetic fuel production from renewable energy sources like biomass is gaining importance driven by the ambitious targets for reducing greenhouse gas emissions worldwide. Sorption enhanced gasification (SEG) proposes carrying out the gasification of biomass in the presence of a CO2 sorbent, which allows producing a syngas with a suitable composition for a subsequent synthetic fuel production step. This study aims at analysing the effect of different operating parameters (e.g. steam-to-carbon (S/C) ratio, CO2 sorption capacity and sorbent-to-biomass ratio) in the syngas composition and char conversion obtained in a 30 kWth bubbling fluidized bed gasifier, using grape seeds as feedstock. The importance of reducing the formation of higher hydrocarbons through a high steam-to-carbon ratio and using a CO2 sorbent with high sorption capacity is assessed. C3-C4 and unsaturated C2 hydrocarbons contents below 1%vol. (in dry and N2 free basis) can be achieved when working with S/C ratios of 1.5 at gasification temperatures from 700 to 740 °C. Varying the amount of the CO2 separated in the gasifier (by modifying the temperature or the CO2 sorption capacity of the sorbent) the content of H2, CO and CO2 in the syngas produced can be greatly modified, resulting in a module M = (H2-CO2)/(CO + CO2) that ranges from 1.2 to almost 3., This work has been carried out as part of the European Commission Horizon 2020 Framework Programme project FLEDGED (Grant agreement No. 727600) and the project WASYNG (No. RTI2018-095575-B-I00) funded by the Spanish Ministry of Science, Innovation and Universities. Authors thank also the Regional Aragon Government (DGA) for the economic support under the research groups' support programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailored syngas production from the gasification of biogenic waste in the presence of a CO2 sorbent

  • Martínez Berges, Isabel
  • Grasa Adiego, Gemma
  • Callén Romero, M. Soledad
  • López Sebastián, José Manuel
  • Murillo Villuendas, Ramón
5 figures, 1 table, Syngas production via steam gasification is one of the thermochemical processes with the greatest potential for obtaining synthetic fuels from a solid fuel, especially indirect gasification in a dual fluidised bed system where the energy needed for gasification is provided by the circulating material from a high temperature secondary reactor. When the circulating material is a CO2 sorbent, a sorption enhanced gasification (SEG) system results where the circulating solid, in addition to the energy provided by sensible heat, supplies additional heat by means of the exothermic carbonation reaction with the CO2 generated from biomass gasification. In the presented work, the SEG process was studied for a biogenic waste material (consisting of the organic fraction of municipal solid waste) in a 30 kWth bubbling fluidised bed reactor using lime as CO2 sorbent. The effect of the main operating variables (temperature, steam-to-carbon (S/C) ratio and sorbent-to-biomass ratio (Ca/C)) on gas quality was assessed. M-modules (M=(H2-CO2)/(CO+CO2)) between 1.2 to almost 4 have been obtained acting on the variables that mostly affect the permanent gas composition, i.e. gasification temperature and/or sorbent-to-biomass ratio., This work has been carried out as part of the European Commission Horizon 2020 Framework Programme project FLEDGED (Grant agreement No. 727600) and the project WASYNG (No. RTI2018-095575-B-100) funded by the Spanish Ministry of Science, Innovation and Universities. Authors thank also the Regional Aragon Government (DGA) for the economic support under the research group’s programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimised production of tailored syngas from municipal solid waste (MSW) by sorption-enhanced gasification

  • Martínez Berges, Isabel
  • Grasa Adiego, Gemma
  • Callén Romero, M. Soledad
  • López Sebastián, José Manuel
  • Murillo Villuendas, Ramón
8 figures, 5 tables, Sorption-enhanced gasification (SEG) is a promising indirect gasification route for the production of synthetic fuels since it allows the H2, CO and CO2 content of the resulting syngas to be adjusted. This SEG process has been successfully demonstrated at pilot scale for lignocellulosic biomass and other agricultural and forest waste products, mainly focusing on H2-rich gas production. Within this work, the potential application of the SEG process to a material derived from municipal solid waste (MSW) as feedstock is experimentally demonstrated in a 30 kWth bubbling fluidised-bed (BFB) gasifier. The influence of the sorbent-to-biomass ratio, steam excess and gasification temperature has been carefully analysed in order to understand their effect on SEG performance. Moreover, main conditions able to affect the resulting syngas composition, specifically in terms of H2, CO and CO2 content, have been indicated. Gasification temperature turned out to be the variable that most influenced syngas composition due to the limiting mechanisms associated with the carbonation of the CaO used as bed material. This operating variable also determined biomass conversion, together with solids residence time in the gasifier, resulting in a wide variation of fixed carbon conversion under the studied conditions. Finally, tar yield and composition were evaluated as a function of temperature and the sorbent-to-biomass ratio used, resulting in tar contents as low as 7 g/Nm3 (dry gas), consisting mainly of 1-ring aromatic compounds., This work has been supported by the European Commission (FLEDGED project, grant agreement No. 727600); the Spanish Ministry of Science and Innovation, the State Research Agency and the European Founds for Regional Development (No. RTI2018-095575-B-I00, MCI/AEI/FEDER, UE); and the Regional Aragon Government (DGA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of process operating conditions in the sorption-enhanced gasification of the organic fraction of municipal solid waste (Msw)

  • Ordóñez Millán, Carlos
  • Martínez Berges, Isabel
  • Grasa Adiego, Gemma
  • Callén Romero, M. Soledad
  • López Sebastián, José Manuel
  • Murillo Villuendas, Ramón
9 figures, 1 table.-- Talk delivered at the 29th European Biomass Conference and Exhibition, EUBCE 2021, Virtual, Online, 26 April 2021 - 29 April 2021., The effect of main operational conditions for the Sorption Enhanced Gasification procees (SEG) on gas quality and tars has been evaluated in a 30 kW bubbling fluidized bed reactor using the organic fraction of municipal solid waste (MSW) as feedstock. The process has been proved to be flexible, and gasification temperature appears to be the variable that mostly affected the M-module in the syn-gas produced and also the presence of light hydrocarbons and tar yield. The steam-to-biomass (S/C) ratio does not influence the permanent gas composition (i.e. the M-module), but affects the content of light hydrocarbons in the syngas as well as tar yield. The sorbent-to- biomass (CaO/C) ratio influences mainly the C3-C4 hydrocarbons content and the tar yield (due to the catalytic effect of CaO towards tar cracking)., This work has been supported by the European Commission (FLEDGED project, grant agreement No. 727600); the Spanish Ministry of Science and Innovation, the State Research Agency and the European Founds for Regional Development (No. RTI2018-095575-B-I00, MCI/AEI/FEDER, UE); and the Regional Aragon Government (DGA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improved productivity in direct dimethyl ether synthesis and sorption enhanced DME synthesis using tungstosilicic acid as the acidic function

  • Peinado Cebrián, Cristina
  • Liuzzi, Dalia
  • Boon, Jurriaan
  • Rojas, Sergio
Renewable dimethyl ether (DME) can reduce the carbon footprint in LPG and transportation sectors. The direct synthesis of DME (DDMES) is attracting a great deal of attention because it is possible to increase the productivity of DME. However, DDMES is hindered by the formation of a high amount of water, which promotes the deactivation of both catalytic phases used in the DDMES, namely Cu/ZnO/Al2O3 and γ-Al2O3. This is particularly relevant when CO2-rich syngas is used, since it leads to a higher production of H2O. In this work we show that heteropolyacids such as HSiW are a suitable alternative to state-of-the-art γ-Al2O3 for the dehydration of methanol during the DDMES. This is because HSiW is not deactivated by the presence of water in the reaction medium. Thus, catalytic beds with HSiW reach up to four times higher DME productivity than those containing γ-Al2O3. This feature is further exacerbated when water is removed from the reactor by means of a sorbent, i.e., during the sorption enhanced direct DME synthesis (SEDMES). Thus, the total carbon conversion is higher for SEDMES than for DDMES regardless of the actual nature of the acid catalyst., This work has been developed in the framework of European H2020 project FLEDGED that has received funding from the European Union’s Horizon 2020 research and in- novation Programme under Grant Agreement No. 727600. Cristina Peinado acknowledges funds from Programa Garantía Juvenil 2016 from CAM (PEJD-2016/AMB-2628). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). We acknowledge support from the PTI Transener+ , Consejo Superior de Investigaciones Científicas (CSIC), Spain., Peer reviewed