Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

FALL3D-8.0: a computational model for atmospheric transport and deposition of particles, aerosols and radionuclides ¿ Part 2: Model validation

  • Prata, Andrew T.
  • Mingari, Leonardo
  • Folch, Arnau
  • Macedonio, Giovanni
  • Costa, Antonio
This paper presents model validation results for the latest version release of the FALL3D atmospheric transport model. The code has been redesigned from scratch to incorporate different categories of species and to overcome legacy issues that precluded its preparation towards extreme-scale computing. The model validation is based on the new FALL3D-8.0 test suite, which comprises a set of four real case studies that encapsulate the major features of the model; namely, the simulation of long-range fine volcanic ash dispersal, volcanic SO2 dispersal, tephra fallout deposits and the dispersal and deposition of radionuclides. The first two test suite cases (i.e. the June 2011 Puyehue-Cordón Caulle ash cloud and the June 2019 Raikoke SO2 cloud) are validated against geostationary satellite retrievals and demonstrate the new FALL3D data insertion scheme. The metrics used to validate the volcanic ash and SO2 simulations are the structure, amplitude and location (SAL) metric and the figure of merit in space (FMS). The other two test suite cases (i.e. the February 2013 Mt. Etna ash cloud and associated tephra fallout deposit, and the dispersal of radionuclides resulting from the 1986 Chernobyl nuclear accident) are validated with scattered ground-based observations of deposit load and local particle grain size distributions and with measurements from the Radioactivity Environmental Monitoring database. For validation of tephra deposit loads and radionuclides, we use two variants of the normalised root-mean-square error metric. We find that FALL3D-8.0 simulations initialised with data insertion consistently improve agreement with satellite retrievals at all lead times up to 48¿h for both volcanic ash and SO2 simulations. In general, SAL scores lower than 1.5 and FMS scores greater than 0.40 indicate acceptable agreement with satellite retrievals of volcanic ash and SO2. In addition, we show very good agreement, across several orders of magnitude, between the model and observations for the 2013 Mt. Etna and 1986 Chernobyl case studies. Our results, along with the validation datasets provided in the publicly available test suite, form the basis for future improvements to FALL3D (version 8 or later) and also allow for model intercomparison studies., This research has been supported by the European Commission, H2020 Excellence Science (ChEESE (grant no.823844)), the European Commission, H2020 Marie Skłodowska-Curie Actions (STARS (grant no. 754433)), the European Commission, H2020 Research Infrastructures (EUROVOLC (grant no.731070)) and the Ministero dell’Istruzione, dell’Università e della Ricerca (grant no. 805 FOE 2015).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The integrated multidisciplinary european volcano infrastructure: from the conception to the implementation

  • Puglisi, Giuseppe
  • Reitano, Danilo
  • Spampinato, Letizia
  • Vogfjörd, Kristin
  • Barsotti, Sara
  • Cacciola, Lucia
  • Geyer, Adelina
  • Steinar Guðjónsson, Davíð
  • Guehenneux, Yannick
  • Komorowski, Jean-Christophe
  • Labazuy, Philippe
  • Lemarchand, Arnaud
  • Nave, Rosella
  • Saurel, Jean-Marie
  • Bachèlery, Patrick
Recent decades have highlighted the increasing need to connect and strengthen the volcanology community at European level. Indeed, research in the volcanology field is highly qualified in Europe and the volcano monitoring infrastructures have achieved valuable know-how, becoming the state-of-the-art in the world. However, the lack of common good practices in sciences and technologies, missing standards, as well as a significant fragmentation of the community requires coordination to move forward and guarantee a trans-national harmonisation. The European Plate Observing System (EPOS) represented the first opportunity to initiate this process of coordination by encouraging the creation of a European volcanological scientific infrastructure for data and service sharing. During the preparation and the design of EPOS, the volcanology community identified the objectives and the needs of the community building, the services to be provided and the work plan to implement the infrastructure. To achieve this aim, the contribution from three European projects FUTUREVOLC, MED-SUV and EUROVOLC was essential. This paper presents the main steps performed during the last years for building the community and implementing the infrastructure., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Data and service management of the EPOS Volcano Observations Thematic Core Service by the European volcanological community

  • Spampinato, Letizia
  • Indovina, Enrico
  • Geyer, Adelina
  • Júlíusdóttir, Ríkey
  • Reitano, Danilo
  • Puglisi, Giuseppe
  • Nave, Rosella
  • Santangelo, Ileana
  • Vogfjörd, Kristín
  • Labazuy, Philippe
  • Cacciola, Lucia
  • Domínguez Cerdeña, Itahiza
  • Guehenneux, Yannick
  • Komorowski, Jean-Christophe
  • Saurel, Jean-Marie
The Volcano Observations Thematic Core Service (VOLC-TCS) is one of ten core services forming the European Research Infrastructure Consortium for the European Plate Observing System (EPOS ERIC). The main objective of the VOLC-TCS is the implementation of a technical, financial, and legal framework compliant with EPOS ERIC to (i) strengthen the European volcanology community represented by Volcano Observatories (VOs) and Volcanological Research Institutions (VRIs), and (ii) provide virtual access to the community’s data, data products software and services (DDSSs) from volcanoes in Europe and European overseas territories. The efforts of the VOLC-TCS community began prior to the appointment of EPOS as an ERIC and have followed a long-term work plan that started in 2002. One of the main challenges for the management of volcanological data has consisted in their great heterogeneity regarding technical characteristics and also legal aspects (e.g. different data policies among the data providers, different purposes for the use of data, ranging from science to monitoring, early-warning and crisis response, and communication and outreach). Another challenge has derived from the consistency of the VOLC-TCS’ products with the overall service provision of EPOS, which merges services from different Earth Science communities (seismology, GNSS, geomagnetic, geochemistry, geology, etc.). Some of the services used in volcanology are in common with the other communities, thus the implementation work was also devoted to harmonising the data and products with standards defined by other TCSs. Yet another important task has been the implementation of the community Gateway to expose and enable access to services not fully compliant with EPOS, or to services implemented by institutions outside the EPOS perimeter, as well as to create a platform that can act as an interface between the VOLC-TCS and data infrastructures operating at a global level (e.g. WOVOdat). Based on the experience gained and the results achieved, we report here on the state of the art of the VOLC-TCS implementation since 2018 and propose future actions to address some of the main technical challenges and measures to ensure mid-to-long term sustainability of the services., The authors really thank all the people coordinating and contributing to EPOS-PP (ECGA n. 262229), EPOS-IP (ECGA n. 676564), and EPOS-SP (ECGA n. 871121) projects for supporting and believing in the volcanology community to make the VOLC‑TCS a reality. The VOLC‑TCS has significantly benefited from the FUTUREVOLC (ECGA n. 308377) and MED-SUV (ECGA n. 308665) supersite projects as well as the EUROVOLC (ECGA n. 731070) infrastructure project. The Spanish EPOS Node is grateful for the financial support provided by CSIC (INFRA20005) and the grant RED2022-134516-E financed by MICIU/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Guidelines and metadata model for a repository of volcanic samples

  • Corsaro, Rosa Anna
  • D’Oriano, Claudia
  • Muro, Andrea Di
  • Geyer, Adelina
  • Gurioli, Lucia
  • Pappalardo, Lucia
  • Pennisi, Maddalena
  • Pompilio, Massimo
  • Principe, Claudia
  • Re, Giuseppe
The volcanological community manages heterogeneous types of data acquired during research projects and monitoring activities of volcanoes. These data consist of both continuous and discrete measurements and observations, which are carried out by ground-based networks and remote sensing instruments, or during field surveys and laboratory analyses. Many types of volcanological research are largely based on the accurate sampling of rocks erupted during past and ongoing volcanic activity. Each sample represents a “physical object” which should be identified and archived before part of it is removed for analytical purposes. In this context, we recommend assigning the collected samples unique and persistent identifiers, such as the International Generic Sample Number (IGSN). However, although the IGSN allows recording the most essential information of the collected samples (e.g. geographic location, sampling method, and collector), the predefined metadata fields are not exhaustive for volcanic samples, which require additional information such as type and timing of the eruptive event, sample temperature, and texture. Here we design the guidelines necessary to facilitate communication between and search of multiple sample repositories and databases run by disparate institutions. To this aim, we build a metadata model, which integrate the IGSN metadata with supplementary information necessary for the monitoring and research activities carried out by the volcanological community. The long-term curation of collected materials is an important investment for the future. Indeed, these collections are a resource for the production of volcanological data, they reduce the need for repeated sampling, they preserve samples that can no longer be collected, and they allow repeat analyses to be made. The primary aim of this work, based on discussion within the EUROVOLC project, is to provide the basic information for populating a relational database structure in the future for the description of different volcanic samples, physically located in different physical repositories and institutions, in order to facilitate future sharing between different groups of scientists and more complete volcanological studies, by means of the proposed metadata structure., The work has been supported by the H2020 EUROVOLC project (Grant Agreement ID 731070). The work is funded by the EPOS-SpN RED2022-134516-E grant (MICIU/AEI/10.13039/501100011033), the Intramural CSIC EUROPEAN PLATE OBSERVING SYSTEM - NODO ESPAÑOL DE EPOS (EPOS-ES) (Ref. 202530E050) and the European Plate Observation System-Spanish Node EPOS-SpN / Nodo Español de EPOS (INFRA20005) grant funded by the Programa CSIC en Grandes Infraestructuras de Investigación Europea. This is Contribution 687 of the ClerVolc Program of Excellence of the International Research Centre of Disaster Science and Sustainable Development., Peer reviewed