Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Energy hardware and workload aware job scheduling towards interconnected HPC environments

  • D'Amico, Marco|||0000-0002-6195-6204
  • Corbalán González, Julita|||0000-0002-3926-5634
New HPC machines are getting close to the exascale. Power consumption for those machines has been increasing, and researchers are studying ways to reduce it. A second trend is HPC machines' growing complexity, with increasing heterogeneous hardware components and different clusters architectures cooperating in the same machine. We refer to these environments with the term heterogeneous multi-cluster environments. With the aim of optimizing performance and energy consumption in these environments, this paper proposes an Energy-Aware-Multi-Cluster (EAMC) job scheduling policy. EAMC-policy is able to optimize the scheduling and placement of jobs by predicting performance and energy consumption of arriving jobs for different hardware architectures and processor frequencies, reducing workload's energy consumption, makespan, and response time. The policy assigns a different priority to each job-resource combination so that the most efficient ones are favored, while less efficient ones are still considered on a variable degree, reducing response time and increasing cluster utilization. We implemented EAMC-policy in Slurm, and we evaluated a scenario in which two CPU clusters collaborate in the same machine. Simulations of workloads running applications modeled from real-world show a reduction of response time and makespan by up to 25% and 6% while saving up to 20% of total energy consumed when compared to policies minimizing runtime, and by 49%, 26%, and 6% compared to policies minimizing energy., This work is partially supported by the Spanish Government through Programa Severo Ochoa (SEV-2015-0493), by the Spanish Ministry of Science and Technology through TIN2015-65316-P project, by the Generalitat de Catalunya (2017-SGR-1414), from the European Union’s Horizon 2020 under grant agreement No. 754304 (DEEP-EST Project), and the BSC-Lenovo collaboration., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Extending the OpenCHK Model with advanced checkpoint features

  • Maroñas Bravo, Marcos
  • Mateo Bellido, Sergi
  • Keller, Kai Rasmus
  • Bautista Gomez, Leonardo|||0000-0002-0814-5779
  • Ayguadé Parra, Eduard|||0000-0002-5146-103X
  • Beltran Querol, Vicenç
One of the major challenges in using extreme scale systems efficiently is to mitigate the impact of faults. Application-level checkpoint/restart (CR) methods provide the best trade-off between productivity, robustness, and performance. There are many solutions implementing CR at the application level. They all provide advanced I/O capabilities to minimize the overhead introduced by CR. Nevertheless, there is still room for improvement in terms of programmability and flexibility, because end-users must manually serialize and deserialize application state using low-level APIs, modify the flow of the application to consider restarts, or rewrite CR code whenever the backend library changes. In this work, we propose a set of compiler directives and clauses that allow users to specify CR operations in a simple way. Our approach supports the common CR features provided by all the CR libraries. However, it can also be extended to support advanced features that are only available in some CR libraries, such as differential checkpointing, the use of HDF5 format, and the possibility of using fault-tolerance-dedicated threads. The result of our evaluation revealed a high increase in programmability. On average, we reduced the number of lines of code by 71%, 94%, and 64% for FTI, SCR, and VeloC, respectively, and no additional overhead was perceived using our solution compared to using the backend libraries directly. Finally, portability is enhanced because our programming model allows the use of any backend library without changing any code., This work is supported by the Spanish Ministerio de Ciencia, Innovación y Universidades (TIN2015-65316-P) and by the Generalitat de Catalunya (2014-SGR-1051). This project received funding from the European Union’s Seventh Framework Programme (FP7/2007-2013) and the Horizon 2020 (H2020) funding framework under grant agreement no. H2020-FETHPC-754304 (DEEPEST)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Role-shifting threads: Increasing OpenMP malleability to address load imbalance at MPI and OpenMP

  • Criado Ledesma, Joel
  • López Herrero, Víctor
  • Vinyals Ylla Català, Joan
  • Ramirez Miranda, Guillem
  • Teruel García, Xavier
  • Garcia Gasulla, Marta|||0000-0003-3682-9905
This paper presents the evolution of the free agent threads for OpenMP to the new role-shifting threads model and their integration with the Dynamic Load Balancing (DLB) library. We demonstrate how free agent threads can improve resource utilization in OpenMP applications with load imbalance in their nested parallel regions. We also demonstrate how DLB efficiently manages the malleability exposed by the role-shifting threads to address load imbalance issues. We use three real-world scientific applications, one of them to demonstrate that free agents alone can improve the OpenMP model without external tools, and two other MPI+OpenMP applications, one of them with a coupling case, to illustrate the potential of the free agent threads’ malleability with an external resource manager to increase the efficiency of the system. In addition, we demonstrate that the new implementation is more usable than the former one, letting the runtime system automatically make decisions that were made by the programmer previously. All software is released open-source., This work has received funding from the DEEP Projects, at the European Commission’s FP7, H2020, and EuroHPC Programmes, under Grant Agreements 287530, 610476, 754304, and 955606. The PCI2021-121958 financed by the Spanish State Research Agency - Ministry of Science and Innovation. And it also has the support of the Spanish Ministry of Science and Innovation (Computacion de Altas Prestaciones VIII: PID2019-107255GB)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Extending the OpenCHK Model with advanced checkpoint features

  • Maroñas Bravo, Marcos
  • Mateo Bellido, Sergi
  • Keller, Kai Rasmus
  • Bautista Gomez, Leonardo
  • Ayguadé Parra, Eduard
  • Beltran Querol, Vicenç
One of the major challenges in using extreme scale systems efficiently is to mitigate the impact of faults. Application-level checkpoint/restart (CR) methods provide the best trade-off between productivity, robustness, and performance. There are many solutions implementing CR at the application level. They all provide advanced I/O capabilities to minimize the overhead introduced by CR. Nevertheless, there is still room for improvement in terms of programmability and flexibility, because end-users must manually serialize and deserialize application state using low-level APIs, modify the flow of the application to consider restarts, or rewrite CR code whenever the backend library changes. In this work, we propose a set of compiler directives and clauses that allow users to specify CR operations in a simple way. Our approach supports the common CR features provided by all the CR libraries. However, it can also be extended to support advanced features that are only available in some CR libraries, such as differential checkpointing, the use of HDF5 format, and the possibility of using fault-tolerance-dedicated threads. The result of our evaluation revealed a high increase in programmability. On average, we reduced the number of lines of code by 71%, 94%, and 64% for FTI, SCR, and VeloC, respectively, and no additional overhead was perceived using our solution compared to using the backend libraries directly. Finally, portability is enhanced because our programming model allows the use of any backend library without changing any code., This work is supported by the Spanish Ministerio de Ciencia, Innovación y Universidades (TIN2015-65316-P) and by the Generalitat de Catalunya (2014-SGR-1051). This project received funding from the European Union’s Seventh Framework Programme (FP7/2007-2013) and the Horizon 2020 (H2020) funding framework under grant agreement no. H2020-FETHPC-754304 (DEEPEST)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Role-shifting threads: Increasing OpenMP malleability to address load imbalance at MPI and OpenMP

  • Criado Ledesma, Joel
  • López Herrero, Víctor
  • Vinyals Ylla Català, Joan
  • Ramirez Miranda, Guillem
  • Teruel García, Xavier
  • Garcia Gasulla, Marta
This paper presents the evolution of the free agent threads for OpenMP to the new role-shifting threads model and their integration with the Dynamic Load Balancing (DLB) library. We demonstrate how free agent threads can improve resource utilization in OpenMP applications with load imbalance in their nested parallel regions. We also demonstrate how DLB efficiently manages the malleability exposed by the role-shifting threads to address load imbalance issues. We use three real-world scientific applications, one of them to demonstrate that free agents alone can improve the OpenMP model without external tools, and two other MPI+OpenMP applications, one of them with a coupling case, to illustrate the potential of the free agent threads’ malleability with an external resource manager to increase the efficiency of the system. In addition, we demonstrate that the new implementation is more usable than the former one, letting the runtime system automatically make decisions that were made by the programmer previously. All software is released open-source., This work has received funding from the DEEP Projects, at the European Commission’s FP7, H2020, and EuroHPC Programmes, under Grant Agreements 287530, 610476, 754304, and 955606. The PCI2021-121958 financed by the Spanish State Research Agency - Ministry of Science and Innovation. And it also has the support of the Spanish Ministry of Science and Innovation (Computacion de Altas Prestaciones VIII: PID2019-107255GB)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Energy hardware and workload aware job scheduling towards interconnected HPC environments

  • D'Amico, Marco
  • Corbalán González, Julita
New HPC machines are getting close to the exascale. Power consumption for those machines has been increasing, and researchers are studying ways to reduce it. A second trend is HPC machines' growing complexity, with increasing heterogeneous hardware components and different clusters architectures cooperating in the same machine. We refer to these environments with the term heterogeneous multi-cluster environments. With the aim of optimizing performance and energy consumption in these environments, this paper proposes an Energy-Aware-Multi-Cluster (EAMC) job scheduling policy. EAMC-policy is able to optimize the scheduling and placement of jobs by predicting performance and energy consumption of arriving jobs for different hardware architectures and processor frequencies, reducing workload's energy consumption, makespan, and response time. The policy assigns a different priority to each job-resource combination so that the most efficient ones are favored, while less efficient ones are still considered on a variable degree, reducing response time and increasing cluster utilization. We implemented EAMC-policy in Slurm, and we evaluated a scenario in which two CPU clusters collaborate in the same machine. Simulations of workloads running applications modeled from real-world show a reduction of response time and makespan by up to 25% and 6% while saving up to 20% of total energy consumed when compared to policies minimizing runtime, and by 49%, 26%, and 6% compared to policies minimizing energy., This work is partially supported by the Spanish Government through Programa Severo Ochoa (SEV-2015-0493), by the Spanish Ministry of Science and Technology through TIN2015-65316-P project, by the Generalitat de Catalunya (2017-SGR-1414), from the European Union’s Horizon 2020 under grant agreement No. 754304 (DEEP-EST Project), and the BSC-Lenovo collaboration., Peer Reviewed, Postprint (author's final draft)