Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

TECNALIA Publications
Publicación Artículo científico (JournalArticle)

Novel Method for an Optimised Calculation of the Cross-Sectional Distribution of Live Loads on Girder Bridge Decks

  • Gaute-Alonso, Alvaro
  • Garcia-Sanchez, David
  • Uriszar-Aldaca, Iñigo Calderon
  • Lopez Castillo, Claudio
One of the main goals in the design of girder bridge deck systems is to determine the cross-sectional distribution of live loads across the different girders that make up the cross-section of the deck. Structural grillage models and current bridge design standards based on a Load Distribution Factor (LDF) provide oversized designs, as demonstrated in this paper. This research introduces a novel method that allows the cross-sectional distribution of live loads on girder bridge decks to be calculated by applying a matrix formulation that reduces the structural problem to 2 degrees of freedom for each girder: the deflection and the rotation of the deck-slab at the centre of the girder’s span. Subsequently, a parametric study is presented that analyses the structural response of 64 girder bridge decks to a total of 384 load states. In addition, the authors compare the outputs of the novel method with those obtained using traditional grillage calculation methods. Finally, the method is experimentally validated on two levels: a) a laboratory test that analyses the structural response of a small-scale girder bridge deck to the application of different load states; b) a real full-scale girder bridge load test that analyses the structural response of the bridge over the Barbate River during its static load test. Based on this analysis, the maximum divergence of the proposed method obtained from the experimental structural response is less than 10%. The use of the proposed novel analysis method undoubtedly provides significant savings in material resources and computing time, while contributing to minimizing overall costs.
TECNALIA Publications
Publicación Artículo científico (JournalArticle)

Estimating the resilience of, and targets for, a transport system using expert opinion

  • Martani, Claudio
  • Adey, Bryan T
  • Robles, Ignacio
  • Gennaro, Federico di
  • Pardi, Livia
  • Beltran-Hernando, Iñaki
  • Toribio-Diaz, Concepcion
  • Redondo, Noemi Jimenez
  • Díaz, Adrián Antonio Moli
To ensure that transport infrastructure provides acceptable levels of service with respect to extreme events, the resilience of the infrastructure needs to be estimated and targets for it need to be set. Recent work in the European research project Future Proofing Strategies for Resilient Transport Networks against Extreme Events (Foresee) has shown how this can be done in situations with a wide range of available data, time frames for the estimation and expertise. This paper provides an example of how an infrastructure manager can use the guideline to estimate the resilience of, and set resilience targets for, an example transport system in a relatively short period of time, even in the case of limited expertise in all the relevant areas and limited knowledge and information on all the basic input variables. The example is fictive but realistic. It is based on a transport system consisting of a section of the A16 highway, in Italy, where a potential landslide could discharge enough material to damage road sections and bridges. The resilience is estimated using resilience indicators with differentiated weights, and the resilience targets are set using cost–benefit analysis, to identify the indicators to be improved first.
TECNALIA Publications
Publicación Artículo científico (JournalArticle)

Novel method for an optimised calculation of modal analysis of girder bridge decks

  • Gaute-Alonso, Alvaro
  • Garcia-Sanchez, David
  • Ramos-Gutierrez, Óscar Ramón
A correct modal analysis of girder bridge decks requires a correct characterisation of the deformation of their cross-section, governed by the longitudinal bending of the girders and the transverse bending of the slab. This paper presents a novel method that allows the modal analysis of girder bridge decks by applying a matrix formulation that reduces the structural problem to one degree of freedom for each girder: the deflection at the centre of the beam span. A parametric study is presented that analyses the structural response of 64 girder bridge decks. The study compares the dynamic structural response obtained by the proposed method with that obtained by traditional grillage calculation methods. The method is experimentally contrasted by a dynamic load test of a full-scale girder bridge. As a result of the analysis, the proposed method reflects adequate convergence with the experimental dynamic structural response. The use of the proposed novel analysis method contributes to the intelligent modelling process for the analysis of the dynamic behaviour of bridges opening the way to easily feed a Digital Twin accelerating the demands of the Decision Support System in real time.
TECNALIA Publications
Publicación Artículo científico (JournalArticle)

Bearing assessment tool for longitudinal bridge performance

  • Garcia-Sanchez, David
  • Fernandez-Navamuel, Ana
  • Sánchez, Diego Zamora
  • Alvear, Daniel
  • Pardo, David
This work provides an unsupervised learning approach based on a single-valued performance indicator to monitor the global behavior of critical components in a viaduct, such as bearings. We propose an outlier detection method for longitudinal displacements to assess the behavior of a singular asymmetric prestressed concrete structure with a 120 m high central pier acting as a fixed point. We first show that the available long-term horizontal displacement measurements recorded during the undamaged state exhibit strong correlations at the different locations of the bearings. Thus, we combine measurements from four sensors to design a robust performance indicator that is only weakly affected by temperature variations after the application of principal component analysis. We validate the method and show its efficiency against false positives and negatives using several metrics: accuracy, precision, recall, and F1 score. Due to its unsupervised learning scope, the proposed technique is intended to serve as a real-time supervision tool that complements maintenance inspections. It aims to provide support for the prioritization and postponement of maintenance actions in bridge management.
TECNALIA Publications
Publicación Artículo científico (JournalArticle)

3D numerical simulation of slope-flexible system interaction using a mixed FEM-SPH model

  • Jimenez Fernandez, Jose Carlos
  • Castanon-Jano, Laura
  • Gaute Alonso, Alvaro
  • Blanco-Fernandez, Elena
  • Gonzalez Fernandez, Juan Carlos
  • Centeno Gonzalez, Victor
  • Castro-Fresno, Daniel
  • Garcia-Sanchez, David
Flexible membranes are light structures anchored to the ground that protect infrastructures or dwellings from rock or soil sliding. One alternative to design these structures is by using numerical simulations. However, very few models were found until date and most of them are in 2D and do not include all their components. This paper presents the development of a numerical model combining Finite Element Modelling (FEM) with Smooth Particle Hydrodynamics (SPH) formulation. Both cylindrical and spherical failure of the slope were simulated. One reference geometry of the slope was designed and a total of 21 slip circles were calculated considering different soil parameters, phreatic level position and drainage solutions. Four case studies were extracted from these scenarios and simulated using different dimensions of the components of the system. As a validation model, an experimental test that imitates the soil detachment and its retention by the steel membrane was successfully reproduced.
TECNALIA Publications
Publicación Artículo científico (JournalArticle)

Estimating, and setting targets for, the resilience of transport infrastructure

  • Adey, Bryan T
  • Martani, Claudio
  • Kielhauser, Clemens
  • Robles, Ignacio Urqulijo
  • Papathanasiou, Natalia
  • Burkhalter, Marcel
  • Beltran-Hernando, Iñaki
  • Garcia-Sanchez, David
To ensure that transport infrastructure provides acceptable levels of service with respect to extreme events, the resilience of the infrastructure needs to be estimated and targets for it need to be set. In this paper, the methodology proposed in the Foresee EU research project is presented. The methodology allows managers to measure, and set targets for, the resilience of transport systems in all situations. It requires clear definition of the transport system and how the service provided and the resilience are to be measured. The methodology allows consideration of the fact that transport infrastructure managers need to estimate resilience with various degrees of accuracy depending on the specific problem to be addressed, the time frame at disposition and the expertise available. These various levels of accuracy are covered by proposing the use of (a) simulations, (b) indicators whose values are directly related to increases in expected restoration intervention costs and reductions in service, and (c) the percentage of fulfilment of indicators. Once resilience has been estimated, the methodology provides guidance on how to set resilience targets with or without cost-benefit analysis. For demonstration, the explanation of the steps of the guideline is supported by their use for a simple transport system.
TECNALIA Publications
Publicación Artículo científico (JournalArticle)

Supervised Deep Learning with Finite Element simulations for damage identification in bridges

  • Fernandez-Navamuel, Ana
  • Zamora-Sánchez, Diego
  • Omella, Ángel J.
  • Pardo, David
  • Garcia-Sanchez, David
  • Magalhães, Filipe
This work proposes a supervised Deep Learning approach for damage identification in bridge structures. We employ a hybrid methodology that incorporates Finite Element simulations to enrich the training phase of a Deep Neural Network with synthetic damage scenarios. The neural network is based on autoencoders and its particular architecture allows to activate or deactivate nonlinear connections under need. The methodology intends to contribute to the progress towards the applicability of Structural Health Monitoring practices in full-scale bridge structures. The ultimate goal is to estimate the location and severity of damage from measurements of the dynamic response of the structure. The damages we seek to detect correspond to material degradations that affect wide areas of the structure by reducing its stiffness properties. Our method allows a feasible adaptation to large systems with complex parametrizations and structural particularities. We investigate the performance of the proposed method on two full-scale instrumented bridges, obtaining adequate results for the testing datasets even in presence of measurement uncertainty. Besides, the method successfully predicts the damage condition for two real damage scenarios of increasing severity available in one of the bridges.
TECNALIA Publications
Publicación Artículo científico (JournalArticle)

Temporary cable force monitoring techniques during bridge construction-phase: the Tajo River Viaduct experience: the Tajo River Viaduct experience

  • Gaute-Alonso, Alvaro
  • Garcia-Sanchez, David
  • Alonso-Cobo, Carlos
  • Calderon-Uriszar-Aldaca, Iñigo
This article deals with the comparative analysis of current cable force monitoring techniques. In addition, the experience of three cable stress monitoring techniques during the construction phase is included: (a) the installation of load cells on the active anchorages of the cables, (b) the installation of unidirectional strain gauges, and (c) the evaluation of stresses in cables applying the vibrating wire technique by means of the installation of accelerometers. The main advantages and disadvantages of each technique analysed are highlighted in the Construction Process context of the Tajo Viaduct, one of the most singular viaducts recently built in Spain.
UCrea Repositorio Abierto de la Universidad de Cantabria
Publicación Artículo científico (JournalArticle)

A combination of DOE - multi-criteria decision making analysis applied to additiveassessment in porous asphalt mixture

  • Slebi Acevedo, Carlos José
  • Castro Fresno, Daniel|||0000-0001-5658-3901
  • Pascual Muñoz, Pablo|||0000-0001-9181-4744
  • Lastra González, Pedro|||0000-0002-4573-6973
Porous asphalt (PA) mixture is setting off an attractive alternative to be used as surface layer in pavements due to the many profits this mixture provides in terms of noise, safety and environmental aspects. Nonetheless, its use is quite limited due to its low durability in comparison to dense graded asphalt mixtures, reason for which the incorporation of different additives is recommended. In this study, the impact of different types of binders and additives in porous asphalt mixtures are experimentally assessed. A total of 54 experimental designs were defined through the Taguchi design of experiments method. Total air voids, interconnected air voids, particle loss in dry and wet conditions and binder drain down were the responses obtained from the experimental tests. Since more than one response was obtained, three Multi-Criteria Decision-Making (MCDM) methods were performed to turn the multiple response optimisation problem into single-objective optimisation problem. Based on the experimental results and statistical analysis, polymer modified binders improve the ravelling resistance without affecting the functional performance of the mixture and without presenting the risk of binder drain down., ABSTRACT: Porous asphalt (PA) mixture is setting off an attractive alternative to be used as surface layer in pavements due to the many profits this mixture provides in terms of noise, safety and environmental aspects. Nonetheless, its use is quite limited due to its low durability in comparison to dense graded asphalt mixtures, reason for which the incorporation of different additives is recommended. In this study, the impact of different types of binders and additives in porous asphalt mixtures are experimentally assessed. A total of 54 experimental designs were defined through the Taguchi design of experiments method. Total air voids, interconnected air voids, particle loss in dry and wet conditions and binder drain down were the responses obtained from the experimental tests. Since more than one response was obtained, three Multi-Criteria Decision-Making (MCDM) methods were performed to turn the multiple response optimisation problem into single-objective optimisation problem. Based on the experimental results and statistical analysis, polymer modified binders improve the ravelling resistance without affecting the functional performance of the mixture and without presenting the risk of binder drain down., This work was supported by Horizon 2020 Framework Programme [grant number 769373]
UCrea Repositorio Abierto de la Universidad de Cantabria
Publicación Artículo científico (JournalArticle)

Estimating, and setting targets for, the resilience of transport infrastructure

  • Adey, Bryan Tyrone
  • Martani, Claudio
  • Kielhauser, Clemens
  • Robles Urquijo, Ignacio|||0000-0001-6477-2147
  • Papathanasiou, Natalia
  • Burkhalter, Marcel
  • Beltran Hernando, Iñaki
  • García Sánchez, David
To ensure that transport infrastructure provides acceptable levels of service with respect to extreme events, the resilience of the infrastructure needs to be estimated and targets for it need to be set. In this paper, the methodology proposed in the Foresee EU research project is presented. The methodology allows managers to measure, and set targets for, the resilience of transport systems in all situations. It requires clear definition of the transport system and how the service provided and the resilience are to be measured. The methodology allows consideration of the fact that transport infrastructure managers need to estimate resilience with various degrees of accuracy depending on the specific problem to be addressed, the time frame at disposition and the expertise available. These various levels of accuracy are covered by proposing the use of (a) simulations, (b) indicators whose values are directly related to increases in expected restoration intervention costs and reductions in service, and (c) the percentage of fulfilment of indicators. Once resilience has been estimated, the methodology provides guidance on how to set resilience targets with or without cost-benefit analysis. For demonstration, the explanation of the steps of the guideline is supported by their use for a simple transport system., This work has received funding from the EU Horizon 2020 researchand innovation programme under the grant agreement 769373(Foresee project). The authors wish to acknowledge the precioussupport of the project partners in developing the guideline. In this sense, a special sense of gratitude goes to the case studies leaders: Livia Pardi from Autostrade per l’Italia, Federico di Gennaro fromthe Italian Association of Toll Motorways and Tunnels Concessionaire Companies, Antonia Perez from the Universidad de Cantabria, Christoph Schütze from Ingenieurgesellschaft fürVerkehrs- und Eisenbahnwesen mbH, David Delgado Zaldívar from Ferrovial Agroman and André Martinez Gonzalez de Oliveira e Costa and Maria Leonor Martins do Nascimento from Infraestruturas de Portugal sa. A particular acknowledgement is also due to Jesús Rodríguez and all the members of the Foresee Stakeholders’ Reference Group that have provided precious feedbacks to improve the first versions of the guidelines. Despite the support received, thispaper reflects only the author’s views. The European Commissionand Innovation and Networks Executive Agency are not responsiblefor any use that may be made of the information contained therein
UCrea Repositorio Abierto de la Universidad de Cantabria
Publicación Artículo científico (JournalArticle)

Temporary Cable Force Monitoring Techniques during Bridge Construction-Phase: The Tajo River Viaduct Experience

  • Gaute Alonso, Álvaro
  • García Sánchez, David
  • Alonso Cobo, Carlos|||0000-0002-0845-3616
  • Calderón Uriszar-Aldaca, Íñigo
ABSTRACT: This article deals with the comparative analysis of current cable force monitoring techniques. In addition, the experience of three cable stress monitoring techniques during the construction phase is included: (a) the installation of load cells on the active anchorages of the cables, (b) the installation of unidirectional strain gauges, and (c) the evaluation of stresses in cables applying the vibrating wire technique by means of the installation of accelerometers. The main advantages and disadvantages of each technique analysed are highlighted in the Construction Process context of the Tajo Viaduct, one of the most singular viaducts recently built in Spain., The authors would like to thank “Administración de Infraestructuras Ferroviarias ADIF” (Administrator of Railway Infrastructures) for trusting the University of Cantabria’s Structures Laboratory to carry out the structural monitoring of the Tajo River Viaduct. This work has received funding from the European’s Union Horizon 2020 research and innovation program under the Grant Agreement No. 769373 (FORESEE project). This paper reflects only the author’s views. The European Commission and INEA are not responsible for any use that may be made of the information contained therein
UCrea Repositorio Abierto de la Universidad de Cantabria
Publicación Artículo científico (JournalArticle)

Estimating the resilience of, and targets for, a transport system using expert opinion

  • Martani, Claudio
  • Adey, Bryan Tyrone
  • Robles Urquijo, Ignacio|||0000-0001-6477-2147
  • Gennaro, Federico di
  • Pardi, Livia
  • Beltrán Hernando, Iñaki
  • Toribio Díaz, Concepción
  • Jiménez Redondo, Noemí
  • Moli Díaz, Abdrán Antonio
To ensure that transport infrastructure provides acceptable levels of service with respect to extreme events, the resilience of the infrastructure needs to be estimated and targets for it need to be set. Recent work in the European research project Future Proofing Strategies for Resilient Transport Networks against Extreme Events (Foresee) has shown how this can be done in situations with a wide range of available data, time frames for the estimation and expertise. This paper provides an example of how an infrastructure manager can use the guideline to estimate the resilience of, and set resilience targets for, an example transport system in a relatively short period of time, even in the case of limited expertise in all the relevant areas and limited knowledge and information on all the basic input variables. The example is fictive but realistic. It is based on a transport system consisting of a section of the A16 highway, in Italy, where a potential landslide could discharge enough material to damage road sections and bridges. The resilience is estimated using resilience indicators with differentiated weights, and the resilience targets are set using cost-benefit analysis, to identify the indicators to be improved first., This work has received funding from the EU Horizon 2020research and innovation programme under grant agreementnumber 769373 (Foresee project). This paper reflects only theauthors’views. The European Commission and Innovation andNetworks Executive Agency are not responsible for any use thatmay be made of the information contained therein.
UCrea Repositorio Abierto de la Universidad de Cantabria
Publicación Artículo científico (JournalArticle)

Effect of Synthetic Fibers and Hydrated Lime in Porous Asphalt Mixture Using Multi-Criteria Decision-Making Techniques

  • Slebi Acevedo, Carlos José
  • Lastra González, Pedro|||0000-0002-4573-6973
  • Calzada Pérez, Miguel Ángel|||0000-0001-6528-9392
  • Castro Fresno, Daniel|||0000-0001-5658-3901
Porous asphalt is a type of mixture characterized by having high air void percentages that offers multiple benefits when used in wearing courses in terms of driving safety, water flow management, and noise reduction. However, the durability of porous asphalt (PA) mixtures is significantly shorter when compared to dense-graded asphalt mixtures. This study investigated the impact of polyolefin-aramid fibers and hydrated lime in the functional and mechanical performance of porous asphalt mixtures. A parametric study based on the concept of design of experiments was carried out through the Taguchi methodology. Accordingly, an experimental design was conducted based on the L18 full factorial orthogonal array. Three control factors-fiber content, binder content, and filler type- were included at various levels, and multiple responses including total air voids, interconnected air voids, particle loss in dry conditions, particle loss in wet conditions, and binder drainage were assessed experimentally. Signal-to-noise ratios were calculated to determine the optimal solution levels for each control factor for the multiple responses. In the second phase of the research, multi-criteria decision-making techniques -namely, criteria importance through inter-criteria correlation and weighted aggregated sum product assessment- were used to transform the multiple-response optimization problem into a single-unique optimization problem and to elaborate a preference ranking among all the mixture designs. The most significant levels for acquiring the optimum overall response value were found to be 0.05% for fiber content and 5.00% for binder content and mixed filler with hydrated lime, Funding: TheFORESEEproject has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No769373.
UCrea Repositorio Abierto de la Universidad de Cantabria
Publicación Artículo científico (JournalArticle)

Novel Method for an Optimised Calculation of the Cross-Sectional Distribution of Live Loads on Girder Bridge Decks

  • Gaute Alonso, Álvaro
  • Garcia-Sanchez, David
  • Calderón Uriszar-Aldaca, Íñigo
  • López Castillo, Claudio|||0000-0001-7523-6163
ABSTRACT: One of the main goals in the design of girder bridge deck systems is to determine the cross-sectional distribution of live loads across the different girders that make up the cross-section of the deck. Structural grillage models and current bridge design standards based on a Load Distribution Factor (LDF) provide oversized designs, as demonstrated in this paper. This research introduces a novel method that allows the cross-sectional distribution of live loads on girder bridge decks to be calculated by applying a matrix formulation that reduces the structural problem to 2 degrees of freedom for each girder: the deflection and the rotation of the deck-slab at the centre of the girder's span. Subsequently, a parametric study is presented that analyses the structural response of 64 girder bridge decks to a total of 384 load states. In addition, the authors compare the outputs of the novel method with those obtained using traditional grillage calculation methods. Finally, the method is experimentally validated on two levels: a) a laboratory test that analyses the structural response of a small-scale girder bridge deck to the application of different load states; b) a real full-scale girder bridge load test that analyses the structural response of the bridge over the Barbate River during its static load test. Based on this analysis, the maximum divergence of the proposed method obtained from the experimental structural response is less than 10%. The use of the proposed novel analysis method undoubtedly provides significant savings in material resources and computing time, while contributing to minimizing overall costs., This work has received funding from the European’s Union Horizon 2020 research and innovation programme under grant agreement No 769373 (FORESEE project). This paper reflects only the author’s views. The European Commission and INEA are not responsible for any use that may be made of the information contained herein
UCrea Repositorio Abierto de la Universidad de Cantabria
Publicación Artículo científico (JournalArticle)

Novel method for an optimised calculation of modal analysis of girder bridge decks

  • Gaute Alonso, Álvaro
  • García Sánchez, David
  • Ramos Gutiérrez, Óscar Ramón|||0000-0002-9800-2375
A correct modal analysis of girder bridge decks requires a correct characterisation of the deformation of their cross-section, governed by the longitudinal bending of the girders and the transverse bending of the slab. This paper presents a novel method that allows the modal analysis of girder bridge decks by applying a matrix formulation that reduces the structural problem to one degree of freedom for each girder: the deflection at the centre of the beam span. A parametric study is presented that analyses the structural response of 64 girder bridge decks. The study compares the dynamic structural response obtained by the proposed method with that obtained by traditional grillage calculation methods. The method is experimentally contrasted by a dynamic load test of a full-scale girder bridge. As a result of the analysis, the proposed method reflects adequate convergence with the experimental dynamic structural response. The use of the proposed novel analysis method contributes to the intelligent modelling process for the analysis of the dynamic behaviour of bridges opening the way to easily feed a Digital Twin accelerating the demands of the Decision Support System in real time.
UCrea Repositorio Abierto de la Universidad de Cantabria
Publicación Artículo científico (JournalArticle)

Multi-Response Optimization of Porous Asphalt Mixtures Reinforced with Aramid and Polyolefin Fibers Employing the CRITIC-TOPSIS Based on Taguchi Methodology

  • Slebi Acevedo, Carlos José
  • Pascual Muñoz, Pablo|||0000-0001-9181-4744
  • Lastra González, Pedro|||0000-0002-4573-6973
  • Castro Fresno, Daniel|||0000-0001-5658-3901
For the optimum design of a Porous Asphalt (PA) mixture, different requirements in terms of functionality and durability have to be fulfilled. In this research, the influence of different control factors such as binder type, fiber content, and binder content were statistically investigated in terms of multiple responses such as total air voids, interconnected air voids, particle loss in dry conditions, particle loss in wet conditions, and binder drainage. The experiments were conducted based on a Taguchi L18 orthogonal array. The best parametric combination per each response was analyzed through signal to noise ratio values. Multiple regression models were employed to predict the responses of the experiments. As more than one response is obtained, a multi-objective optimization was performed by employing Criteria Importance through Criteria Inter-Correlation (CRITIC) and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) methodologies. The weights for the selection of the functional and mechanical performance criteria were derived from the CRITIC approach, whereas the ranking of the different experiments was obtained through the TOPSIS technique. According to the CRITIC-TOPSIS based Taguchi methodology, the optimal multiple-response was obtained for a polymer modified binder (PMB) with fiber and binder contents of 0.15% and 5.0%, respectively. In addition, good results were obtained when using a conventional 50/70 penetration grade binder with a 5.0% binder content and 0.05% fiber content., FORESEE project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 769373.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Novel method for an optimised calculation of the cross-sectional distribution of live loads on girder bridge decks

  • Gaute-Alonso, Álvaro
  • Garcia Sánchez, David
  • Calderón Uriszar-Aldaca, Íñigo
  • Lopez Castillo, Claudio
One of the main goals in the design of girder bridge deck systems is to determine the cross-sectional distribution of live loads across the different girders that make up the cross-section of the deck. Structural grillage models and current bridge design standards based on a Load Distribution Factor (LDF) provide oversized designs, as demonstrated in this paper. This research introduces a novel method that allows the cross-sectional distribution of live loads on girder bridge decks to be calculated by applying a matrix formulation that reduces the structural problem to 2 degrees of freedom for each girder: the deflection and the rotation of the deck-slab at the centre of the girder's span. Subsequently, a parametric study is presented that analyses the structural response of 64 girder bridge decks to a total of 384 load states. In addition, the authors compare the outputs of the novel method with those obtained using traditional grillage calculation methods. Finally, the method is experimentally validated on two levels: a) a laboratory test that analyses the structural response of a small-scale girder bridge deck to the application of different load states; b) a real full-scale girder bridge load test that analyses the structural response of the bridge over the Barbate River during its static load test. Based on this analysis, the maximum divergence of the proposed method obtained from the experimental structural response is less than 10%. The use of the proposed novel analysis method undoubtedly provides significant savings in material resources and computing time, while contributing to minimizing overall costs., This work has received funding from the European's Union Horizon 2020 research and innovation programme under grant agreement No 769373 (FORESEE project).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Bearing Assessment Tool for Longitudinal Bridge Performance

  • García Sánchez, David
  • Fernández Navamuel del Olmo, Ana
  • Zamora Sánchez, Diego
  • Alvear, Daniel
  • Pardo Zubiaur, David
This work provides an unsupervised learning approach based on a single-valued performance indicator to monitor the global behavior of critical components in a viaduct, such as bearings. We propose an outlier detection method for longitudinal displacements to assess the behavior of a singular asymmetric prestressed concrete structure with a 120 m high central pier acting as a fixed point. We first show that the available long-term horizontal displacement measurements recorded during the undamaged state exhibit strong correlations at the different locations of the bearings. Thus, we combine measurements from four sensors to design a robust performance indicator that is only weakly affected by temperature variations after the application of principal component analysis. We validate the method and show its efficiency against false positives and negatives using several metrics: accuracy, precision, recall, and F1 score. Due to its unsupervised learning scope, the proposed technique is intended to serve as a real-time supervision tool that complements maintenance inspections. It aims to provide support for the prioritization and postponement of maintenance actions in bridge management., Authors would like to acknowledge the discussions with Marcos Pantaleon from APIA XXI, Ambher Monitoring Systems and Banobras S.N.C. This work has received funding from the European's Union Horizon 2020 research and innovation program under the grant agreement No 690660 (RAGTIME Project) and No 769373 (FORESEE Project). This paper reflects only the author's views. The European Commission and INEA are not responsible for any use that may be made of the information contained therein. David Pardo has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 777778 (MATHROCKS), the European POCTEFA 2014-2020 Project PIXIL (EFA362/19) by the European Regional Development Fund (ERDF) through the Interreg V-A Spain-France-Andorra program, the Project of the Spanish Ministry of Science and Innovation with reference PID2019-108111RB-I00 (FEDER/AEI), the BCAM "Severo Ochoa" accreditation of excellence (SEV-2017-0718), and the Basque Government through the BERC 2018-2021 program, the two Elkartek projects 3KIA (KK-2020/00049) and MATHEO (KK-2019-00085), the grant "Artificial Intelligence in BCAM number EXP. 2019/00432", and the Consolidated Research Group MATHMODE (IT1294-19) given by the Department of Education
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Supervised Deep Learning with Finite Element simulations for damage identification in bridges

  • Fernández Navamuel del Olmo, Ana
  • Zamora Sánchez, Diego
  • Omella Milian, Ángel Javier
  • Pardo Zubiaur, David
  • García Sánchez, David
  • Magalhães, Filipe
[EN] This work proposes a supervised Deep Learning approach for damage identification in bridge structures. We employ a hybrid methodology that incorporates Finite Element simulations to enrich the training phase of a Deep Neural Network with synthetic damage scenarios. The neural network is based on autoencoders and its particular architecture allows to activate or deactivate nonlinear connections under need. The methodology intends to contribute to the progress towards the applicability of Structural Health Monitoring practices in fullscale bridge structures. The ultimate goal is to estimate the location and severity of damage from measurements of the dynamic response of the structure. The damages we seek to detect correspond to material degradations that affect wide areas of the structure by reducing its stiffness properties. Our method allows a feasible adaptation to large systems with complex parametrizations and structural particularities. We investigate the performance of the proposed method on two full-scale instrumented bridges, obtaining adequate results for the testing datasets even in presence of measurement uncertainty. Besides, the method successfully predicts the damage condition for two real damage scenarios of increasing severity available in one of the bridges., ``BCAM Severo Ochoa'' accreditation of excellence This work has received funding from the European's Union Horizon 2020 research and innovation program under the grant agreement No 769373 (FORESEE project). This paper reflects only the author's views. The European Commission and INEA are not responsible for any use that may be made of the information contained therein. Authors would like to acknowledge the Basque Government funding within the ELKARTEK programme (SIGZE project (KK-2021/00095)). This work was financially supported by: Base Funding - UIDB/04708/2020 of the CONSTRUCT -Instituto de I&D em Estruturas e Construcoes - funded by national funds through the FCT/MCTES (PIDDAC). David Pardo has received funding from: the European Union's Horizon 2020 research and innovation program under the Marie SklodowskaCurie grant agreement No 777778 (MATHROCKS); the European Regional Development Fund (ERDF) through the Interreg V-A Spain-France-Andorra program POCTEFA 2014-2020 Project PIXIL (EFA362/19); the Spanish Ministry of Science and Innovation projects with references PID2019-108111RB-I00 (FEDER/AEI) and PDC2021-121093-I00, the ``BCAM Severo Ochoa'' accreditation of excellence (SEV-2017-0718); and the Basque Government through the BERC 2018-2021 program, the three Elkartek projects 3KIA (KK-2020/00049), EXPERTIA (KK-2021/00048), and SIGZE (KK-2021/00095), and the Consolidated Research Group MATHMODE (IT1294-19) given by the Department of Education.