Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

The FlyZone Testbed Architecture for Aerial Drone Applications

  • Afanasov, Mikhail
  • Mottola, Luca
Aerial drones represent a new breed of mobile computing. Compared to mobile phones and connected cars that only opportunistically sense or communicate, aerial drones offer direct control over their movements. They can thus implement functionality that were previously beyond reach, such as collecting high-resolution imagery, exploring near-inaccessible areas, or inspecting remote areas to gather fine-grain environmental data., This research was partially supported by the EU commission with H2020 project 5G-DIVE (grant agreement 85988), by the Italian Ministry of Education, University, and Research through the cluster project “ICT Solutions to Support Logistics and Transport Processes (ITS)”, and by the Swedish Innovation Agency through project “DePILOT”, “DePILOT Reloaded”, and “DepDrone”.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Monitoring in fog computing: state-of-the-art and research challenges

  • Abreha, Haftay Gebreslasie
  • Bernardos Cano, Carlos Jesús
  • Oliva Delgado, Antonio de la
  • Cominardi, Luca
  • Azcorra Saloña, Arturo
Fog computing has rapidly become a widely accepted computing paradigm to mitigate cloud computing-based infrastructure limitations such as scarcity of bandwidth, large latency, security, and privacy issues. Fog computing resources and applications dynamically vary at run-time, and they are highly distributed, mobile, and appear-disappear rapidly at any time over the internet. Therefore, to ensure the quality of service and experience for end-users, it is necessary to comply with a comprehensive monitoring approach. However, the volatility and dynamism characteristics of fog resources make the monitoring design complex and cumbersome. The aim of this article is therefore three-fold: 1) to analyse fog computing-based infrastructures and existing monitoring solutions; 2) to highlight the main requirements and challenges based on a taxonomy; 3) to identify open issues and potential future research directions., This work has been (partially) funded by H2020 EU/TW 5G-DIVE (Grant 859881) and H2020 5Growth (Grant 856709). It has been also funded by the Spanish State Research Agency (TRUE5G project, PID2019-108713RB-C52 PID2019-108713RB-C52 / AEI / 10.13039/501100011033).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

DEEP: A vertical-oriented intelligent and automated platform for the edge and fog

  • Magalhaes Guimaraes, Carlos Eduardo
  • Groshev, Milan
  • Cominardi, Luca
  • Zabala Orive, Aitor
  • Contreras Murillo, Luis Miguel
  • Talat, Samer T.
  • Zhang, Chao
  • Hazra, Saptarshi
  • Mourad, Alain
  • Oliva Delgado, Antonio de la
The fifth generation (5G) of mobile communications introduces improvements on many fronts when compared to its previous generations. Besides the performance enhancements and new advances in radio technologies, it also integrates other technological domains, such as cloud-to-things continuum and artificial intelligence. In this work, the 5G-DIVE Elastic Edge Platform (DEEP) is proposed as the linking piece for the integration of these technological domains, making available an intelligent edge and fog 5G end-to-end solution. This solution brings numerous benefits to vertical industries by enabling streamlined, abstracted, and automated management of their vertical services, thus contributing to the introduction of novel services, cost savings, and improved time to market. Preliminary validation of the proposed platform is performed through a proof of concept, along with a qualitative analysis of its benefits for Industry 4.0 and autonomous drone scouting vertical industries., This work has been (partially) funded by the H2020 EU/TW joint action 5G-DIVE (Grant #859881). We want to thank Javier Sacido, Matteo Pergolesi, Olivier Hécart, and Julien Enoch for their support in the proof-of-concept integration.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Stateless Flow-Zone Switching Using Software-Defined Addressing

  • González Díaz, Sergio
  • Marks, Roger
  • Rojas Sánchez, Elisa
  • Oliva Delgado, Antonio de la
  • Gazda, Robert
The trend toward cloudification of communication networks and services, with user data and applications stored and processed in data centers, pushes the limits of current Data Center Networks (DCNs), requiring improved scalability, resiliency, and performance. Here we consider a DCN forwarding approach based on software-defined addressing (SDA), which embeds semantics in the Medium Access Control (MAC) address and thereby enables new forwarding processes. This work presents Flow-Zone Switching (FZS), a loop-free location-based source-routing solution that eliminates the need for forwarding tables by embedding routing instructions and flow identifiers directly in the flow-zone software-defined address. FZS speeds the forwarding process, increasing the throughput and reducing the latency of QoS-sensitive flows while reducing the capital and operational costs of switching. This paper presents details of FZS and a performance evaluation within a complete DCN., This work was supported in part by the H2020 Europe/Taiwan Joint Action 5G-DIVE under Grant 859881, in part by the Spanish State Research Agency through the TRUE5G Project under Grant PID2019-108713RB-C52/AEI/10.13039/501100011033, and in part by the Comunidad de Madrid through the Project TAPIR-CM under Grant S2018/TCS-4496.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Delay and reliability-constrained VNF placement on mobile and volatile 5G infrastructure

  • Németh, Balázs
  • Molner, Nuria
  • Martín Pérez, Jorge
  • Bernardos Cano, Carlos Jesús
  • Oliva Delgado, Antonio de la
  • Sonkoly, Balázs
Ongoing research and industrial exploitation of SDN and NFV technologies promise higher flexibility on network automation and infrastructure optimization. Choosing the location of Virtual Network Functions is a central problem in the automation and optimization of the software-defined, virtualization-based next generation of networks such as 5G and beyond. Network services provided for autonomous vehicles, factory automation, e-health and cloud robotics often require strict delay bounds and reliability constraints influenced by the location of its composing Virtual Network Functions. Robots, vehicles and other end-devices provide significant capabilities such as actuators, sensors and local computation which are essential for some services. Moreover, these devices are continuously on the move and might lose network connection or run out of battery, which further challenge service delivery in this dynamic environment. This work tackles the mobility, and battery restrictions; as well as the temporal aspects and conflicting traits of reliable, low latency service deployment over a volatile network, where mobile compute nodes act as an extension of the cloud and edge computing infrastructure. The problem is formulated as a cost-minimizing Virtual Network Function placement optimization and an efficient heuristic is proposed. The algorithms are extensively evaluated from various aspects by simulation on detailed real-world scenarios., This work has been partially funded by the EC H2020 5G-DIVE Project (grant no.: 859881) and EC H2020 5G-GROWTH Project (grant no.: 856709).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Managing the far-edge: are today's centralized solutions a good fit?

  • Baldoni, Gabriele
  • Cominardi, Luca
  • Groshev, Milan
  • Oliva Delgado, Antonio de la
  • Corsaro, Angelo
Edge computing has established itself as the foundation for next-generation mobile networks, IT infrastructure, and industrial systems thanks to promised low network latency, computation offloading, and data locality. These properties empower key use-cases like Industry 4.0, Vehicular Communication and Internet of Things. Nowadays implementation of Edge computing is based on extensions to available Cloud computing software tools. While this approach accelerates adoption, it hinders the deployment of the aforementioned use-cases that requires an infrastructure largely more decentralized than Cloud data centers, notably in the far-Edge of the network. In this context, this work aims at: (i) to analyze the differences between Cloud and Edge infrastructures, (ii) to analyze the architecture adopted by the most prominent open-source Edge computing solutions, and (iii) to experimentally evaluate those solutions in terms of scalability and service instantiation time in a medium-size far Edge system. Results show that mainstream Edge solutions require powerful centralized controllers and always-on connectivity, making them unsuitable for highly decentralized scenarios in the far-Edge where stable and high-bandwidth links are not ubiquitous., This work has been partially funded by the H2020 collaborative Europe/Taiwan research project 5G-DIVE (grant no. 589881) and by the H2020 European collaborative research project DAEMON (grant no. 101017109).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Overview of Architectural Alternatives for the Integration of ETSI MEC Environments from Different Administrative Domains

  • Contreras Murillo, Luis Miguel
  • Bernardos Cano, Carlos Jesús
This article belongs to the Special Issue Cloud Computing and Applications, Multi-access Edge Computing (MEC) is proposed as a standard framework for the provision and consumption of applications and services in proximity to the end-users of network operators. Proximity has been identified as one of the enablers of the forthcoming 5G, where extreme low latency and large bandwidth will be necessary for some services. However, the need of proximity imposes to network operators the necessity of huge investments in order to distribute computing capabilities towards the access. A less investment intensive approach would consist on sharing infrastructures by integrating MEC environments from different operators or providers. This could open the door to new business models on the one hand, as well as to avoid restrictions in terms of space, energy of regulation, on the other. This paper overviews different integration options by analyzing the MEC framework defined by the European Telecommunications Standards Institute (ETSI) and identifying different architectural alternatives as well as the business and technical aspects that need to be taken into consideration for realizing such integration., This work has been partly funded by the European Commission through the projects EU-TW 5GDIVE (Grant Agreement no. 859881) and H2020 5GROWTH (Grant Agreement no. 856709). This information reflects the consortia views, but neither the consortia nor the European Commission are liable for any use that may be done of the information contained therein.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Adaptive Telemetry for Software-Defined Mobile Networks

  • Cominardi, Luca
  • Gonzalez Diaz, Sergio
  • Oliva Delgado, Antonio de la
  • Bernardos Cano, Carlos Jesús
The forthcoming set of 5G standards will bring programmability and flexibility to levels never seen before. This has required introducing changes in the architecture of mobile networks, enabling different features such as the split of control and data planes, as required to support the rapid programming of heterogeneous data planes. Software Defined Networking (SDN) has emerged as a basic toolset for operators to manage their infrastructure, as it opens up the possibility of running a multitude of intelligent and advanced applications for network optimization purposes in a centralized network controller. However, the very basic nature that makes possible this efficient management and operation in a flexible way-the logical centralization-poses important challenges due to the lack of proper monitoring tools, suited for SDN-based architectures. In order to take timely and right decisions while operat-ing a network, centralized intelligence applications need to be fed with a continuous stream of up-to-date network statistics. However, this is not feasible with current SDN solutions due to scalability and accuracy issues. This article first analyzes the monitoring issues in current SDN solutions and then proposes a telemetry frame-work for software defined mobile networks capable of adapting to the various 5G services. Finally, it presents an experimental validation that shows the benefits of the proposed solution at alleviating the load on the control and data planes, improv-ing the reactiveness to network events, and providing better accuracy for network measurements., This work has been partially funded by the H2020 Framework Programme Europe/Taiwan joint action 5G-DIVE Project (Grant No. 859881), by the H2020 Framework Programme EU 5G-Transformer Project (Grant No. 761586), and by the H2020 Framework Programme EU 5Growth Project (Grant No. 856709).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Dimensioning V2N services in 5G networks through forecast-based scaling

  • Martín Pérez, Jorge
  • Kondepu, Koteswararao
  • De Vleeschauwer, Danny
  • Reddy, Venkatarami
  • Magalhaes Guimaraes, Carlos Eduardo
  • Sgambelluri, Andrea
  • Valcarenghi, Luca
  • Papagianni, Chrysa
  • Bernardos Cano, Carlos Jesús
With the increasing adoption of intelligent transportation systems and the upcoming era of autonomous vehicles, vehicular services (such as remote driving, cooperative awareness, and hazard warning) will have to operate in an ever-changing and dynamic environment. Anticipating the dynamics of traffic flows on the roads is critical for these services and, therefore, it is of paramount importance to forecast how they will evolve over time. By predicting future events (such as traffic jams) and demands, vehicular services can take proactive actions to minimize Service Level Agreement (SLA) violations and reduce the risk of accidents. In this paper, we compare several techniques, including both traditional time-series and recent Machine Learning (ML)-based approaches, to forecast the traffic flow at different road segments in the city of Torino (Italy). Using the the most accurate forecasting technique, we propose n-max algorithm as a forecast-based scaling algorithm for vertical scaling of edge resources, comparing its benefits against state-of-the-art solutions for three distinct Vehicle-to-Network (V2N) services. Results show that the proposed scaling algorithm outperforms the state-of-the-art, reducing Service Level Objective (SLO) violations for remote driving and hazard warning services., Work partially funded by the EU H2020 5GROWTH Project (grant no. 856709) and H2020 collaborative Europe/Taiwan research project 5G-DIVE (grant no. 859881).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Support for availability attributes in network slices in GANSO

  • Guimarães, Carlos
  • Oliva Delgado, Antonio de la
  • Contreras Murillo, Luis Miguel
Network slicing provides a way to define logically isolated networks over the same and shared physical infrastructure. This paper departs from previous work defining GST And Network Slice Operator (GANSO), a framework for automating the creation of network slices over SDN architectures, and proposes extensions to support the availability attribute as defined by the GSMA Generic Network Slice Template (GST). This new attribute is integrated and implemented within the GANSO framework, being validated through a set of experimental results., This work has been (partially) funded by H2020 EU/TW 5G-DIVE (Grant 859881) and H2020 5Growth (Grant 856709). It has been also funded by the Spanish State Research Agency (TRUE5G project, PID2019-108713RB-C52PID2019-108713RB-52/AEI/10.13039/501100011033)
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

MEC Support for Network Slicing: Status and Limitations from a Standardization Viewpoint

  • Cominardi, Luca
  • Deiss, Thomas
  • Filippou, Miltiadis
  • Sciancalepore, Vincenzo
  • Giust, Fabio
  • Sabella, Dario
Edge computing and network slicing might be considered as main pillars of the upcoming 5G systems as they inject flexibility in the network management operations. While one prominent architectural framework for edge computing has been recently defined by the ETSI standard organization, namely Multi-access Edge Computing (MEC), network slicing has reached its momentum by fostering interest in different standardization bodies and fora. To better understand how such distinct network slicing definitions impact on the standardized MEC framework, ETSI has recently published a study on the matter. In this paper, we first overview with a comprehensive analysis the different network slicing concepts and their relationship. Then, we elaborate on the ETSI study to provide an integrated view of network slicing technology within the context of MEC. Finally, we report on the open challenges in the ETSI study and we propose two solutions to evolve the current MEC framework towards end-to-end multi-slice support and efficient multi-tenant inter-slice communication in 5G deployments., This work has been partially funded by the EU H2020 projects 5G-CARMEN (grant no. 825012), 5Genesis (grant no. 815178) and the H2020 collaborative EU/TW research project 5G-DIVE (grant no. 859881).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Enabling Mobile Service Continuity across Orchestrated Edge Networks

  • Abdullaziz, Osamah Ibrahiem
  • Wang, Li-Chun
  • Chundrigar, Shahzoob Bilal
  • Huang, Kuei-Li
Edge networking has become an important technology for providing low-latency services to end users. However, deploying an edge network does not guarantee continuous service for mobile users. Mobility can cause frequent interruptions and network delays as users leave the initial serving edge. In this paper, we propose a solution to provide transparent service continuity for mobile users in large-scale WiFi networks. The contribution of this work has three parts. First, we propose ARNAB architecture to achieve mobile service continuity. The term ARNAB means rabbit in Arabic, which represents an Architecture for Transparent Service Continuity via Double-tier Migration. The first tier migrates user connectivity, while the second tier migrates user containerized applications. ARNAB provides mobile services just like rabbits hop through the WiFi infrastructure. Second, we identify the root-causes for prolonged container migration downtime. Finally, we enhance the container migration scheme by improving system response time. Our experimental results show that the downtime of ARNAB container migration solution is 50% shorter than that of the state-of-the-art migration., This work has been partially funded by the H2020 Europe/Taiwan joint action 5G-DIVE (Grant #859881) and also partially funded by the Ministry of Science and Technology, under the Grant Number MOST 108-2634-F-009-006 - through Pervasive Artificial Intelligence Research (PAIR) Labs, Taiwan.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Fog-enabled Scalable C-V2X Architecture for Distributed 5G and Beyond Applications

  • Sarrigiannis, Ioannis
  • Contreras Murillo, Luis Miguel
  • Ramantas, Kostas
  • Antonopoulos, Angelos
  • Verikoukis, Christos
The Internet of Things (IoT) ecosystem, as fostered by fifth generation (5G) applications, demands a highly available network infrastructure. In particular, the internet of vehicles use cases, as a subset of the overall IoT environment, require a combination of high availability and low latency in big volumes support. This can be enabled by a network function virtualization architecture that is able to provide resources wherever and whenever needed, from the core to the edge up to the end user proximity, in accordance with the fog computing paradigm. In this article, we propose a fog-enabled cellular vehicle-to-everything architecture that provides resources at the core, the edge and the vehicle layers. The proposed architecture enables the connection of virtual machines, containers and unikernels that form an application-as-a-service function chain that can be deployed across the three layers. Furthermore, we provide lifecycle management mechanisms that can efficiently manage and orchestrate the underlying physical resources by leveraging live migration and scaling functionalities. Additionally, we design and implement a 5G platform to evaluate the basic functionalities of our proposed mechanisms in real-life scenarios. Finally, the experimental results demonstrate that our proposed scheme maximizes the accepted requests, without violating the applications’ service level agreement., This work has been supported in part by the research projects SPOTLIGHT (722788), AGAUR (2017-SGR-891), 5G-DIVE (859881), SPOT5G (TEC2017-87456-P), MonB5G (871780) and 5G-Routes (951867).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Dissecting the impact of information and communication technologies on digital twins as a service

  • Groshev, Milan
  • Magalhaes Guimaraes, Carlos Eduardo
  • Oliva Delgado, Antonio de la
  • Gazda, Robert
Recent advances on Edge computing, Network Function Virtualization (NFV) and 5G are stimulating the interest of the industrial sector to satisfy the stringent and real-time requirements of their applications. Digital Twin is a key piece in the industrial digital transformation and its benefits are very well studied in the literature. However, designing and implementing a Digital Twin system that integrates all the emerging technologies and meets the connectivity requirements (e.g., latency, reliability) is an ambitious task. Therefore, prototyping the system is required to gradually validate and optimize Digital Twin solutions. In this work, an Edge Robotics Digital Twin system is implemented as a prototype that embodies the concept of Digital Twin as a Service (DTaaS). Such system enables real-time applications such as visualization and remote control, requiring low-latency and high reliability. The capability of the system to offer potential savings by means of computation offloading are analyzed in different deployment configurations. Moreover, the impact of different wireless channels (e.g., 5G, 4G and WiFi) to support the data exchange between a physical device and its virtual components are assessed within operational Digital Twins. Results show that potentially 16% of CPU and 34% of MEM savings can be achieved by virtualizing and offloading software components in the Edge. In addition, they show that 5G connectivity enables remote control of 20 ms, appearing as the most promising radio access technology to support the main requirements of Digital Twin systems., This work was supported in part by the H2020 European Union/Taiwan (EU/TW) Joint Action 5G-eDge Intelligence for Vertical Experimentation (DIVE) under Grant 859881, in part by the H2020 5Growth Project under Grant 856709, in part by the Madrid Government (Comunidad de Madrid-Spain) through the Multiannual Agreement with Universidad Carlos III de Madrid (UC3M) in the line of Excellence of University Professors under Grant EPUC3M21, and in part by the context of the V PRICIT (Regional Program of Research and Technological Innovation).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Architecture for integrating vertical customer programmability control of network functions and connectivity in a slice-as-a-service schema

  • Contreras Murillo, Luis Miguel
  • Barguil, Samier
  • Vilalta, Ricard
  • López, Víctor
Network slicing will permit offering to vertical customers tailored end-to-end logical networks in an on-demand fashion, on top of a common telecom infrastructure, achieving a Slices-as-a-Service (SlaaS) business model. This is possible due to the progressive introduction of network softwarization techniques, such as programmability and virtualization, into existing operational networks, enabling dynamic and flexible provision of slices. Those vertical customers could require the control not only of the network functions composing the end-to-end service, but also of the connectivity among them, e.g., for influencing the paths for steering traffic among function instances. However, this can be problematic since decisions from one vertical customer can collide with decisions from others. One aspect not yet sufficiently investigated is how to permit vertical customers to jointly control the service functions and the underlay connectivity, in such a way that could operate the allocated slice as if it was actually a dedicated network entirely for them. This paper explores some architectural proposition in this respect illustrated with some potential use cases and it provides an example of the provision of SlaaS for a vertical customer., This work has been partly funded by the European Commission through the projects 5G-PPP H2020 5GROWTH (Grant Agreement No 856709), EU-TW 5G-DIVE (Grant Agreement No 859881) and by the Spanish AURORAS (RTI2018-099178-B-I00) project. This information reflects the consortia views, but neither the consortia nor the European Commission are liable for any use that may be done of the information contained therein.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Toward intelligent cyber-physical systems: Digital twin meets artificial intelligence

  • Groshev, Milan
  • Magalhaes Guimaraes, Carlos Eduardo
  • Martín Pérez, Jorge
  • Oliva Delgado, Antonio de la
Industry 4.0 aims to support smarter and autonomous processes while improving agility, cost efficiency, and user experience. To fulfill its promises, properly processing the data of the industrial processes and infrastructures is required. Artificial intelligence (AI) appears as a strong candidate to handle all generated data, and to help in the automation and smartification process. This article overviews the digital twin as a true embodiment of a cyber-physical system (CPS) in Industry 4.0, showing the mission of AI in this concept. It presents the key enabling technologies of the digital twin such as edge, fog, and 5G, where the physical processes are integrated with the computing and network domains. The role of AI in each technology domain is identified by analyzing a set of AI agents at the application and infrastructure levels. Finally, movement prediction is selected and experimentally validated using real data generated by a digital twin for robotic arms with results showcasing its potential., This work has been (partially) funded by the H2020 EU/TW joint action 5G-DIVE (Grant #859881) and the H2020 5Growth project (Grant #856709). It has also been funded by the Spanish State Research Agency (TRUE5G project, PID2019-108713RB-C52/AEI/10.13039/501100011033).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

An efficient algorithm for fast service edge selection in cloud-based telco networks

  • Baliosian De Lazzari, Javier Ernesto
  • Contreras, Luis Miguel
  • Martínez-Julia, Pedro
  • Serrat Fernández, Juan|||0000-0002-4551-9880
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Telecommunication operators are increasingly integrating computational infrastructure into their networks at different location levels, including the network edge. This makes a highly distributed processing environment a reality, which is expected to enable next-generation services. This article proposes a novel and efficient algorithm to determine the best service execution locations through the “service edge”, a concept that groups services in categories according to their requirements and benefits from the flexibility of distributed cloud resources. The paper is focused on describing the algorithm so that it can be integrated into the telco operators’ management and orchestration systems. Simulation results underpin the practical feasibility of the proposed algorithm., The European Commission has partly funded this work through the projects NECOS (Grant Agreement No 777067) and 5G-DIVE (Grant Agreement No 859881)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An efficient algorithm for fast service edge selection in cloud-based telco networks

  • Baliosian De Lazzari, Javier Ernesto
  • Contreras, Luis Miguel
  • Martínez-Julia, Pedro
  • Serrat Fernández, Juan
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Telecommunication operators are increasingly integrating computational infrastructure into their networks at different location levels, including the network edge. This makes a highly distributed processing environment a reality, which is expected to enable next-generation services. This article proposes a novel and efficient algorithm to determine the best service execution locations through the “service edge”, a concept that groups services in categories according to their requirements and benefits from the flexibility of distributed cloud resources. The paper is focused on describing the algorithm so that it can be integrated into the telco operators’ management and orchestration systems. Simulation results underpin the practical feasibility of the proposed algorithm., The European Commission has partly funded this work through the projects NECOS (Grant Agreement No 777067) and 5G-DIVE (Grant Agreement No 859881)., Peer Reviewed, Postprint (author's final draft)
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Stateless flow-zone switching using software-defined addressing

  • González Diaz, Sergio
  • Marks, Roger
  • Rojas Sánchez, Elisa|||0000-0002-6385-2628
  • Oliva, Antonio de la
  • Gazda, Robert
The trend toward cloudification of communication networks and services, with user data and applications stored and processed in data centers, pushes the limits of current Data Center Networks (DCNs), requiring improved scalability, resiliency, and performance. Here we consider a DCN forwarding approach based on software-defined addressing (SDA), which embeds semantics in the Medium Access Control (MAC) address and thereby enables new forwarding processes. This work presents Flow-Zone Switching (FZS), a loop-free location-based source-routing solution that eliminates the need for forwarding tables by embedding routing instructions and flow identifiers directly in the flow-zone software-defined address. FZS speeds the forwarding process, increasing the throughput and reducing the latency of QoS-sensitive flows while reducing the capital and operational costs of switching. This paper presents details of FZS and a performance evaluation within a complete DCN., European Commission, Agencia Estatal de Investigación, Comunidad de Madrid