Pasar al contenido principal

DISEÑO, GESTION Y CONTROL MEDIOAMBIENTAL DE REGADIOS MODERNIZADOS POR ASPERSION EN EL VALLE DEL EBRO

AGL2013-48728-C2-2-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario CENTRO DE INVESTIGACION Y TECNOLOGIA AGROALIMENTARIA DE ARAGON (CITA)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Adapting the CROPGRO model to simulate alfalfa growth and yield

  • Malik, Wafa
  • Boote, Kenneth J.
  • Hoogenboom, Gerrit
  • Cavero Campo, José
  • Dechmi, Farida
14 Pags.- 6 Figs.- 6 Tabls. Available freely online through the author-supported open access option. Copyright © 2018 by the American Society of Agronomy. This is an open access article distributed under the CC BY-NC-ND license., Despite alfalfa’s global importance, there is a dearth of crop simulation models available for predicting alfalfa growth and yield with its associated composition. The objectives of this research were to adapt the CSM-CROPGRO Perennial Forage Model for simulating alfalfa growth and yield and to describe model adaptation for this species. Data from six experimental plots grown under sprinkler irrigation in the Ebro valley (Northeast Spain) were used for model adaptation. Starting with parameters for Bracharia brizantha, the model adaptation was based on values and relationships reported from the literature for cardinal temperatures and dry matter partitioning. A Bayesian optimizer was used to optimize temperature effects on photosynthesis and daylength effects on partitioning and an inverse modeling technique was employed for nitrogen fixation rate and nodule growth. The calibration of alfalfa tissue composition was initiated from soybean composition analogy but was improved with values from alfalfa literature. There was considerable iteration in optimizing parameters for the processes outlined above where comparisons were made to measured data. After adaptation, the Root Mean Square Error and d-statistic of harvested herbage averaged across 58 harvests (yield range: 990–4617 kg ha–1) were 760 kg ha–1 and 0.75, respectively. In addition, good agreement was observed for Leaf Area Index (LAI) (LAI range: 0.1–6.7) with d-statistic of 0.71. Simulated belowground mass was within the range of literature values. The results of this study showed that CROPGRO-PFM-Alfalfa can be used to simulate alfalfa growth and development. Further testing with more extensive datasets is needed to improve model robustness., This work was funded by the Ministry of Economy and Competitiveness of the Spanish Government through the research grants (AGL2013-48728-C2-2-R). We thank this Ministry for awarding Wafa Malik a predoctoral fellowship and financial support for research abroad internship at the University of Florida., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modelling agricultural nitrogen losses to enhance the environmental sustainability under Mediterranean conditions

  • Malik, Wafa
  • Dechmi, Farida
15 Pags.- 8 Figs.- 4 Tabls., In intensive agricultural systems, irrigation and nitrogen (N) fertilizer are the most important factors that influence crop production and N losses. This work aimed to evaluate the N best management practices using the calibrated and validated Decision Support System for Agro-technology Transfer (DSSAT) model for maize (short and long season), wheat, barley, sunflower and alfalfa in the Violada Irrigation District (VID, Northeast Spain) to reduce the impact of N losses on irrigation return flows quality. In total, 59 farmers’ field plots were investigated from 2014 to 2017 crop seasons distributed in the different soil types in the VID in order to assess the current and optimum N fertilization and the combined irrigation and N fertilization management practices. Considering the whole cultivated crop area in each soil type of the VID and comparing with the current N fertilization, results showed that the optimum N management could reduce the NO3–N leaching below root zone by 51 % and residual NO3–N in soil by 58 %. These reductions could be improved further by 35 % and 3 %, respectively, under the combined N fertilization and irrigation optimum management. The more vulnerable soils for NO3–N leaching (shallow and/or very permeable soils) were also identified. As for the impact of individual crops, the model identified that both long and short season maize were the most polluting crops (84 % of total N leached) due to the heavy fertilization applied by the local farmers that exceed crop requirements by more than 50 %. Moreover, the recommended irrigation and N fertilization could reduce N2O–N emissions by 60 %, the triple than under the recommended N fertilization alone. This study supports the potential of the DSSAT model to incentivize farmers to adjust their N fertilizer and irrigation practices to crop requirement and soil properties to ensure production while improving environmental sustainability., This work was funded by the Ministry of Economy and Competitiveness of the Spanish Government through the research grants (AGL2013-48728-C2-2-R) and by the European Agricultural Fund for Rural Development (EAFRD) and the Government of Aragón through the cooperation project “Nitratos” of the Rural Development Programme (PDR). We thank this Ministry for awarding Wafa Malik a predoctoral fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coupled DSSAT-SWAT models to reduce off-site N pollution in Mediterranean irrigated watershed

  • Malik, Wafa
  • Jiménez-Aguirre, María Teresa
  • Dechmi, Farida
54 Pags.- 6 Tabls.- 8 Figs. The definitive version is available at: https://www.sciencedirect.com/science/journal/00489697, In any agricultural watershed, best management practices (BMPs) are a conservational way to reduce non-point source pollution and, soil and water resources sustainability. The objectives of this study were to calibrate and validate the modified Soil and Water Assessment Tool (SWAT) in the Violada Watershed (VW), Spain and assess the BMPs scenarios, already tested at field scale, using the Decision Support System for Agro Technology Transfer model (DSSAT), and finally, to access the BMPs impact on water quality off-site. To this end, daily streamflow discharge and NO3− concentration were measured at VW outlet from October 2015 to September 2017 for model evaluation. The SWAT-CUP was used for sensitivity analysis, calibration and validation for both measured variables after manual calibration of the main crops yield. Three management scenarios were compared to the current conditions (baseline): (i) recommended N fertilization, (ii) optimum irrigation and; (iii) combined recommended N fertilization and optimum irrigation (combined BMPs). The SWAT crop growth model calibration demonstrated that the annual average of crop yield and actual evapotranspiration estimations were satisfactory. Monthly calibration and validation results were satisfactory for streamflow discharge and NO3-N load, with Nash–Sutcliffe efficiency (NSE) according to the criteria reported in the literature. The two individual scenarios results showed difference in their environmental impact and therefore combined BMPs scenario was considered more efficient in reducing NO3-N load (51%) than the recommended N fertilization (36%) and the optimum irrigation (12%), while including all additional environment and farmers' benefits of both individual scenarios. Under this combined scenarios, all crops yields were maintained or increased, and the total irrigation water and N mineral fertilizers application reduction were about 5% and 27%, respectively. However, further work is still needed to consider additional BMPs to limit the soil N residual losses during the non-cropped period. The applied methodology can be a good alternative for improving water quality in similar irrigated watersheds., This work was funded by the Ministry of Economy and Competitiveness of the Spanish Government through the research grants (AGL2013-48728-C2-2-R) and by the European Agricultural Fund for Rural Development (EAFRD) and the Government of Aragón through the cooperation project “Nitratos” of the Rural Development Program (PDR). We thank this Ministry for awarding Wafa Malik a predoctoral fellowship and financial support for research abroad internship at the University of Osnabruck (Germany)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modeling environmental impact in a semi-arid intensive irrigated watershed

  • Dechmi, Farida
  • Skhiri, Ahmed
  • Isidoro, Daniel
34 Pags.- 8 Figs.- 6 Tabls. The definitive version is available at: https://www.sciencedirect.com/science/journal/03783774, Improving on-field farmers’ management skills is imperative for an economically and environmentally sustainable irrigated agriculture in semi-arid areas where the quality of the irrigation return flow (IRF) is mainly affected by excessive fertilization and surplus irrigation water. The SWAT model is used worldwide for environmental impact assessment, however, previous versions were unable to simulate appropriately the hydrological processes in irrigated areas. The objectives of this study were to assess the change preformed in SWAT2018 manual irrigation algorithms and to evaluate the impact of the optimum irrigation and nitrogen management practices on crop yield, irrigation return flows and nitrate load in Del Reguero watershed (Spain) after model calibration and validation. The irrigation algorithm in the SWAT2018 source code did not include the irrigation application efficiency in the net irrigation dose calculation, which is very important in irrigated systems. The streamflow calibration and validation resulting statistics for daily and monthly streamflow indicate a “very good” model performance (NSE = 0.75–0.87). The monthly NO3-N load calibration and validation results indicated ‘‘very good’’ (NSE = 0.83 and PBIAS = 4.7%) and ‘‘satisfactory’ ’to ‘‘very good’’ (NSE = 0.64 and PBIAS = 9.36%) performance, respectively. Scenarios assessment showed that combined recommended N fertilization and optimum irrigation were advantageous both for the environment and farmers’ benefits rather than individual scenarios for reaching maximum reduction in NO3-N loads (52%) with better net incomes for farmers (27% yield increase and 26% less N fertilizers inputs), and irrigation water saving (21%) which leads to savings in energy costs. On the one hand, this study allowed for building a more reliable and suitable SWAT model for use in intensive irrigation watersheds, while on the other hand, it supports and reinforces previous results performed in other pressurized irrigated areas for better farmer acceptance and adoption., This work was funded by the Spanish MINECO, Agencia Estatal de Investigación (AEI) and the European Regional Development Fund (ERDF) through the research projects RTI2018-100987-R-I00 and AGL2013-48728-C2-2-R; and by the Government of Aragón and the European Agricultural Fund for Rural Development (EAFRD) through the cooperation project “Nitratos” of the Rural Development Program (RDP)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Soil variability in La Violada Irrigation District (Spain): II Characterizing hydrologic and salinity features

  • Jiménez-Aguirre, M.T.
  • Isidoro, D.
  • Usón, A.
The recent modernization of 1.1 Mha of irrigated land in Spain calls for the evaluation of these transformations in terms of environmental impact and resource use efficiency. The available data for this evaluation has increased with the transformation (better, digital and spatially distributed data) allowing for the use of distributed soil water and solute movement models. But most hydrological models require soil hydrologic properties that are costly and time-consuming to gather and soil information in Spain is generally scarce. This paper focuses in analyzing the soil hydrologic features in La Violada Irrigation District (VID; a 5234 ha semi-arid irrigated area recently modernized in northeast Spain) usable in soil water models for the evaluation of the new irrigation system. The recent soil map of the VID (presented in a companion paper) gathered the hydrologic and salinity properties of the horizons in the described soil units. The hydraulic conductivity (Ks) of the horizons was also assessed by the inverse auger-hole method. From these data, the VID was disaggregated in three homogeneous units according to their hydrologic features and Pedotransfer Functions (PTFs) were built for the whole VID (General Model) and separately for the homogeneous soil units (Distributed Model). These PTFs allowed for obtaining field capacity (FC) and wilting point (WP) from texture and organic matter, while Ks depended upon texture and gypsum content. Apparently, there were no salinity issues in VID soils due to irrigation. The high Ca2 + and Mg2 + levels in the saturation extract resulted in generally low SAR, what along with the high gypsum and carbonate contents may help to prevent soil degradation by sodicity. As a result, the homogeneous hydrologic zones defined in VID may be used to recommend specific irrigation practices and as the basis for the application of distributed soil water movement models. These hydrologic properties may be applied directly as inputs to the models while the PTFs may allow for setting adequate parameters in nearby areas with similar soils from more readily available soil information (texture, organic matter and gypsum).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Soil variability in La Violada Irrigation District (Spain): I delineating soil units for irrigation

  • Jiménez-Aguirre, M.T.
  • Isidoro, D.
  • Usón, A.
The knowledge of the soil variability is essential for its hydrologic characterization, for irrigation management and planning and especially for water movement modeling. Nevertheless, the scarcity of soil information in Spain precludes its use in irrigation management and, particularly, in the on-going irrigation modernization process. The Violada Irrigation District (VID) comprises 5234 ha and is located in a semi-arid gypsum-rich region in northeast Spain. VID has been under flood irrigation since the mid-20th Century and has been modernized recently to sprinkler irrigation. Since the early 1980s water balances in VID have been based on average soil properties and bulk irrigation data. The current irrigation system provides detailed irrigation data at plot level, thus allowing for performing distributed balances (in hydrologic homogenous zones) that require detailed or semi-detailed soil information in the form of a soil map. The objective of this two-part study is to define homogeneous zones in relation to hydrological properties relevant for irrigation management, first defining the soil variability within the VID and then analyzing the soils hydrologic and salinity features (in a companion paper). The specific objectives of this paper were (i) to draw the VID semi-detailed soil map; (ii) to explain the variability of soil properties; and (iii) to map the main soil characteristics related to irrigation management. Thirty four soil pits, located on all the different geomorphological areas, were opened and described. Samples were taken from all the horizons and analyzed for chemical and physical properties. The limits of soil units were drawn with the aid of 32 additional auger holes, the data from 72 pits opened during the irrigation transformation works, and all the previous soil information available. Finally the soils were classified down to family level. The main soil formation processes in VID were carbonation and gypsification. Thirteen soil units were defined, included in five soil subgroups and six particle size families. “Fine” particle sizes were dominant along the gypsum-rich valley bottoms. Coarser textures were found on the heights and showed higher CaCO3 equivalent content and no presence of gypsum accumulations. A priori, the main limitation for irrigation in the valley soils was the limited drainage (due to fine textures and reduced slope) while in the highland soils it might be constrained by their low retention capacity. The high gypsum and carbonate content of the VID soils may prevent the development of infiltration problems. The soil properties map in this work will be the basis for a companion paper delineating the hydrologic properties of the soils, the basis for improved soil water balances.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Hydrosaline Balance in and Nitrogen Loads from an irrigation district before and after modernization

  • Jiménez-Aguirre, M.T.
  • Isidoro, D.
The stress on water resources and the need to maintain water quality and to protect the environment push for an efficient use of natural resources: irrigation water and nutrients (particularly nitrogen). Traditional surface irrigation areas (frequently located on saline materials) use huge amounts of these resources, contributing to the degradation of water bodies by salts and nitrate loads in Irrigation Return Flows (IRF), and also to soil salinization when salt leaching is constrained. In this respect, 1.5 Mha of irrigated lands in Spain have been modernized recently to more efficient systems. Such is the case of the Violada Irrigation District (VID; 4880 ha; Northeast Spain) modernized from surface to sprinkler irrigation. The availability of historical data under both irrigation systems in VID offered an ideal scenario to analyze the impact of the modernization process on water consumption and nitrogen management. The analysis was based on the water and salt balances, which showed that irrigation modernization triggered an alteration of the hydrological regime of the VID controlled by the irrigation system. The transformation to sprinkler irrigation resulted in high quality non-diverted water savings of 5536 m3/ha yr (19 h m3/yr for the whole VID) available for other uses downstream, triggering a reduction of the IRF from the VID to the Ebro River. In general, the modernization has brought about a clear reduction of all flows in the water balance (except ETa), together with a slight increase in salt and nitrate concentrations in IRF. Both changes entailed a reduction in salt and nitrate loads of 11.5 Mg/ha yr (44, 889 Mg/yr; -60.4%) and 82.2 kg N/ha yr (301 Mg N/yr; -70.4%), respectively. The modernization also resulted in better water use and agronomic indices (drainage fraction, consumptive fraction and irrigation fraction). It was also concluded that at the moment, there is no risk of soil salinization in VID.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Adapting the CROPGRO model to simulate alfalfa growth and yield

  • Malik, Wafa
  • Boote, Kenneth J.
  • Hoogemboom, Gerrit
  • Cavero, José
  • Dechmi, Farida
Despite alfalfa’s global importance, there is a dearth of crop simulation models available for predicting alfalfa growth and yield with its associated composition. The objectives of this research were to adapt the CSM-CROPGRO Perennial Forage Model for simulating alfalfa growth and yield and to describe model adaptation for this species. Data from six experimental plots grown under sprinkler irrigation in the Ebro valley (Northeast Spain) were used for model adaptation. Starting with parameters for Bracharia brizantha, the model adaptation was based on values and relationships reported from the literature for cardinal temperatures and dry matter partitioning. A Bayesian optimizer was used to optimize temperature effects on photosynthesis and daylength effects on partitioning and an inverse modeling technique was employed for nitrogen fixation rate and nodule growth. The calibration of alfalfa tissue composition was initiated from soybean composition analogy but was improved with values from alfalfa literature. There was considerable iteration in optimizing parameters for the processes outlined above where comparisons were made to measured data. After adaptation, the Root Mean Square Error and d-statistic of harvested herbage averaged across 58 harvests (yield range: 990-4617 kg ha-1) were 760 kg ha-1 and 0.75, respectively. In addition, good agreement was observed for Leaf Area Index (LAI) (LAI range: 0.1-6.7) with d-statistic of 0.71. Simulated belowground mass was within the range of literature values. The results of this study showed that CROPGRO-PFM-Alfalfa can be used to simulate alfalfa growth and development. Further testing with more extensive datasets is needed to improve model robustness.