Pasar al contenido principal

CEMENTOS HIBRIDOS: SINTESIS E HIDRATACION

BIA2013-43293-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydration of Hybrid Alkaline Cement Containing a Very Large Proportion of Fly Ash: A Descriptive Model

  • García-Lodeiro, Inés
  • Donatello, Shane
  • Fernández-Jiménez, Ana
  • Palomo, Ángel
In hybrid alkaline fly ash cements, a new generation of binders, hydration, is characterized by features found in both ordinary portland cement (OPC) hydration and the alkali activation of fly ash (AAFA). Hybrid alkaline fly ash cements typically have a high fly ash (70 wt % to 80 wt %) and low clinker (20 wt % to 30 wt %) content. The clinker component favors curing at ambient temperature. A hydration mechanism is proposed based on the authors’ research on these hybrid binders over the last five years. The mechanisms for OPC hydration and FA alkaline activation are summarized by way of reference. In hybrid systems, fly ash activity is visible at very early ages, when two types of gel are formed: C–S–H from the OPC and N–A–S–H from the fly ash. In their mutual presence, these gels tend to evolve, respectively, into C–A–S–H and (N,C)–A–S–H. The use of activators with different degrees of alkalinity has a direct impact on reaction kinetics but does not modify the main final products, a mixture of C–A–S–H and (N,C)–A–S–H gels. The proportion of each gel in the mix does, however, depend on the alkalinity generated in the medium., : This study was funded by a research grant (BIA2013-43293-R) awarded by the Spanish Ministry of the Economy and Competitiveness (MINECO) to Ana Fernández. The participation of Post-graduate Studies Council post-doctoral grantees (2011) Shane Donatello and Ines Garcia-Lodeiro (JAE Doc 2011) was co-funded by MINECO and the European Social Fund. We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Activated carbon as an alternative fuel. Effect of carbon ash on cement clinkerization

  • Husillos Rodríguez, N.
  • Martínez-Ramírez, S.
  • Blanco-Varela, María Teresa
9 págs.; 7 figs.; 10 tabs., Spent activated carbon is a by-product of potabilization plants. The present study explored the feasibility of valorizing this waste as an alternative fuel to replace oil coke in portland clinker furnaces. This involved determining its composition, calorific value, and ash and heavy metal content. Since the ash generated by spent activated carbon firing is taken up by the clinker, the possible effect of such uptake on clinkerization or the properties of the clinker obtained were also ascertained. Although spent activated carbon has an 18% lower calorific value than oil coke, one of the traditional cement kiln fuels, it was found to be apt for the purpose envisaged. Its ash content (10 wt%) is one order of magnitude higher than the ash content in coke. Spent activated carbon ash contains substantial proportions of anhydrite and quartz, hematite and augite, but consists primarily of amorphous matter (59 wt%). The effect of this ash on clinker phases was studied by clinkerizing raw meal in which it was used as a replacement for clay. Such meal exhibited high burnability and yielded clinkers with a composition and mineralogy comparable to the properties found in the industrial product. The sulfate present in the ash induced substantial alite crystal growth in the clinker. The loss of minority elements during clinkerization was likewise studied. © 2016 Elsevier Ltd. All rights reserved., This study was conducted under the leadership of Aguas de Barcelona as part of a CENIT 2007-1039 (National Strategic Consortia for Technical Research) project entitled “Technological development of a self-sustainable urban water cycle” (SOSTAQUA), funded by the Spanish Centre for Industrial Technological Development (CDTI). It has been also funded from BIA 2013-47876-C2-1-P and BIA2013- 43293-R projects., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanical-chemical activation of coal fly ashes: An effective way for recycling and make cementitious materials

  • Fernández-Jiménez, Ana
  • García-Lodeiro, Inés
  • Maltseva, O.
This paper is wholly committed to resource efficiency through the valorization of waste from other industries, and more specifically fly ash as a raw material to produce concrete-like geopolymers. In particular, this study aimed to determine the effect of the physical and chemical characteristics of recycled coal fly ash used to manufacture alkaline cement on reaction kinetics and product microstructure and performance. The ash was mixed with 8 M NaOH and cured for 20 h at 85°C and RH > 90% to form a compact paste, after which mechanical strength was determined and the reaction rate was calculated using isothermal conduction calorimetry. The findings showed that vitreous content (SiO2/Al2O3), reactive and (especially) fineness play a very important role in both the development of cement mechanical strength and the composition and structure of the reaction products formed., This research was funded by the Spanish Ministry of the Economy and Competitiveness and FEDER under research projects BIA2013-43293-R, BIA2016-76466-R, and RTC2016-4872-S., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterization and hydration of cements and pastes obtained from raw mix containing Moroccan oil shale and coal waste as a raw material

  • Chhaiba, Salma
  • Blanco-Varela, María Teresa
  • Diouri, A.
  • Bougarrani, S.
In the present work, the hydration and physical properties of cements obtained from a raw mixes containing oil shale and coal waste as an alternative raw material were explored. A study of clinkers was carried out using chemical analysis and Rietveld analysis and the hydrated products were characterized by conduction calorimetry, X-ray diffraction, FTIR, Differential thermal analysis-thermal gravimetry and Scanning electron microscope. The findings showed that the cement paste containing both oil shale and coal waste had the highest compressive strength. According to the hydration studies, the four hydration steps were observed in all cements. The conduction calorimetry study showed the formation of the calcium monosulfoaluminate phase (AFm) in all cements which in cement containing coal waste was retarded by 50 h due to the high Na2O concentration in its clinker. Further, the identified hydration products: C-S-H gel, portlandite and Afm phase, which detected by XRD, FTIR and ATD/TG have been observed morphologically in SEM images. Moreover, the EDX microstructural study revealed that C-S-H gel contains a less amount of Aluminum and sulfur., This paper has been carried out as part of a CSIC-Mohammed V University of Rabat, cooperation programm (iCOOPA20067). Facilities given by IETcc (CSIC) and funding from BIA 2013-47876-C2-1-P and BIA BIA2013-43293-R projects as well as the Regional Government of Madrid Community and European Social Fund (Geomaterials Programme2 S2013/MIT-2914) are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Moroccan oil shale and coal waste as alternative raw materials in Portland cement clinker manufacture. Clinkerisation reactions and clinker characterisation, Esquistos bituminosos como materia prima alternative en la fabricación de clínker de cemento Portland. Reacciones de clinkerización y caracterización del clínker.

  • Chhaiba, Salma
  • Blanco-Varela, María Teresa
  • Diouri, A.
[EN]: For some time the cement industry has been seeking procedures to effectively lower the higher energy costs involved in cement manufacture. Timahdit oil shale and Jerada coal waste could potentially be used as alternative raw materials to produce clinker. This study explored the possibility of applying those materials to a greener use, based on the reactivity and burnability of raw mixes containing Moroccan oil shale and coal waste. The findings showed that, irrespective of particle size, oil shale mixes delivered higher reactivity than coal waste materials, although reactivity was highest in the oil shale clinker with a particle size < 45 μm. The clinkers bearing oil shale with a particle size < 90 μm or a blend of oil shale and coal waste with a size < 45 μm contained higher proportions of alite ( > 70 %)., [ES]: La industria cementerabusca desde hace algún tiempo procedimientos que reduzcan el alto consumo de energía de la producción de cemento. La pizarra bituminosa de Timahdit (BOS) y los desechos de carbón de Jerada (CW) se pueden utilizar potencialmente como materiales alternativos en la fabricación de clinker. Este estudio se enfoca en evaluar esta posibilidad, valorizar dichos materiales y considerar un uso más ecológico para ellos. Exploramos la reactividad y la aptitud a la cocción de mezclas crudas de clínker que contienen BOS o CW. La reactividad de los crudos que contienen BOS es mejor que la de los que contienen CW, independientemente de su tamaño de partícula, siendo el que contiene BOS con un tamaño de partícula <45 μm, la más reactiva. Los clínkeres que contienen BOS o la mezcla de BOS y CW (tamaño de partícula <90 μm y 45 μm respectivamente) contienen proporciones de alita >70%., This paper has been carried out as part of a CSIC-Mohammed V University of Rabat, cooperation programm (i-COOPA20067). Facilities given by IETcc (CSIC) and funding from BIA 2013-47876-C2-1-P and BIA BIA2013-43293-R projects as well as the Regional Government of Madrid Community and European Social Fund (Geomaterials Programme2 S2013/MIT-2914) are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Manufacture of hybrid cements with fly ash and bottom ash from a municipal solid waste incinerator

  • García-Lodeiro, Inés
  • Carcelen-Taboada, V.
  • Fernández-Jiménez, Ana
  • Palomo, Ángel
Concerns about the large volume of fly ash and bottom ash generated by the incineration of municipal solid waste (MSW) have induced the scientific community to seek ways to reduce their environmental impact. One of the proposals that has been researched most intensely is their valorisation as supplementary cementitious materials and aggregates in Portland cement-based pastes, mortars and concretes. The present paper proposes an alternative use for this waste: as a raw material in alkali-activated hybrid cements. A hybrid cement developed for that purpose by blending 60 wt% clinker and 40 wt% incinerator bottom ash and fly ash exhibited good 28-day mechanical strength (upward of 32.5 MPa). The leaching of potentially toxic metals present in the hybrid cement as a result of the inclusion of MSW fly ash and bottom ash was tested with different leaching procedures. The findings and the results of the analysis of the leaching parameters measured (Li, Fij…) showed that the hybrid cement proposed can effectively immobilise the potentially hazardous metals present in MSW fly ash and bottom ash., This research was funded by the Spanish Ministry of the Economy and Competitiveness under projects BIA2013-43293-R and RTC-2014-2351-5. One of the authors worked under a Post-graduate Studies Council grant co-funded by the Spanish National Research Council and the European Social Fund (ESF)., Peer reviewed