Pasar al contenido principal

SISTEMAS ESTRUCTURALES FLEXO-ACTIVOS. CONCEPCION, DESARROLLO Y ANALISIS DE NUEVOS PROTOTIPOS

BIA2015-69330-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mechanical models in computational form finding of bending-active structures

  • Lazaro, Carlos|||0000-0001-7255-7068
  • Monleón Cremades, Salvador|||0000-0002-5726-749X
  • Bessini-Muñoz, Juan Gabriel
[EN] This article reviews the different aspects involved in computational form finding of bending-active structures based on the dynamic relaxation technique. Dynamic relaxation has been applied to form-finding problems of bending-active structures in a number of references. Due to the complex nature of large spatial deformations of flexible beams, the implementation of suitable mechanical beam models in the dynamic relaxation algorithm is a non-trivial task. Type of discretization and underlying beam theory have been identified as key aspects for numerical implementations. References can be classified into two groups depending on the selected discretization: finite-difference-like and finite-element-like. The first group includes 3- and 4-degree-of-freedom implementations based on increasingly complex beam models. The second gathers 6-degree-of-freedom discretizations based on co-rotational three-dimensional Kirchhoff¿Love beam elements and geometrically exact Reissner¿Simo beam elements. After reviewing and comparing implementation details, the advantages and drawbacks of each group have been discussed, and open aspects for future work have been pointed out., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: The financial support from the Spanish Ministry of Economy and Competitiveness through grant BIA2015-69330-P (MINECO) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Shape generation of bending-active braced arches based on elastica curves

  • Bessini, Juan
  • Casanova Colón, José
  • Monleón Cremades, Salvador|||0000-0002-5726-749X
  • Lazaro, Carlos|||0000-0001-7255-7068
[EN] The active bending concept provides a new perspective for a well-established structural type which has been used at various scales: the beam-string, consisting of a beam with an attached lower tie in tension and bracing struts balancing the forces between them. The idea goes back to the gutter beams of the Crystal Palace and has been widely used to the present for large-scale structures. When a slender beam is used, the tension in the tie induces curvature in the beam and increases the structural depth of the system; this opens new formal possibilities and results in lightweight structures at the expense of increasing their overall flexibility. Systems of this kind fall within the realm of active bending. We name them bending-active braced arches. The target shape of the system follows the tensioning process and needs to be pre-determined by means of a specific analysis, typically involving dynamic relaxation or optimization-based methods. In this paper, we propose an analytical method to generate shapes for bending-active braced arches. It assumes that each segment of the activated rod between deviators behaves as a segment of elastica; this enables the use of closed-form expressions to evaluate the shape and induced stress level in the active member. Taking advantage of this idea, it is possible to devise a procedure to carry out the shaping process in a sequential way by adequately choosing the design parameters. When alternative choices for the parameters are selected, the problem becomes non-linear and can be solved using suitable techniques. Some examples with different design constraints have been reproduced to illustrate the possibilities of the method., This work has been partially supported by the Spanish Ministry of Economy and Competitiveness through grant BIA2015-69330-P (MINECO).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficiency-based design of bending-active tied arches

  • Bessini, J.
  • Casanova Colón, José
  • Lazaro, Carlos|||0000-0001-7255-7068
  • Monleón Cremades, Salvador|||0000-0002-5726-749X
[EN] Active bending is recently attracting considerable attention as a new paradigm to build lightweight structures both in research and practice. While there are many references dealing with form-finding methods for bending-active structures, the literature on their performance in relation to their shape and member proportioning is still scarce. This paper addresses the relationship between configuration finding and structural performance in bending-active tied arches: planar arches composed of a bent (active) rod, lower spanning cables and secondary struts that are joined to the rod and act as cable deviators. This simple bending-active arrangement allows to state key relationships between shape, proportion and performance. Starting from the fact that rod segments between struts behave as elastica segments, and selecting the mechanical slenderness of the rod as key parameter, scale-independent relationships between rise-to-span ratio, rod slenderness and stresses after activation have been established for a three-strut tied arch. The limitations posed by keeping stresses in cables after the activation within an acceptable range have been also addressed. Span-deflection ratios corresponding to Eurocode loads for the serviceability limit state have been obtained for a set of three-strut configurations using a non-linear structural model. Results have been represented in terms of rod slenderness, cable slenderness and rise-to-span ratio. The same procedure has been used to determine and represent proper utilization ratios for rod cross-sections in ultimate limit state. All the results have been combined to show the design space corresponding to the given constraints and to exemplify how to extract from it a suitable structural configuration. Finally, we explain how to extend the proposed method to design bending-active tied arches with an arbitrary number and proportion of deviators., The authors gratefully acknowledge the financial support from the Spanish Ministry of Economy and Competitiveness through grant BIA2015-69330-P (MINECO) and the support from CALTER Ingenieria and SOFiSTiK AG for providing a software license.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A form-finding method based on the geometrically exact rod model for bending-active structures

  • Bessini-Muñoz, Juan Gabriel
  • Lazaro, Carlos|||0000-0001-7255-7068
  • Monleón Cremades, Salvador|||0000-0002-5726-749X
[EN] In the field of bending-active structures, the complexity of finding beforehand the equilibrium configuration and the non-linearity of the structural response are main issues during the conceptual phase. The use of tools based on classical form-finding procedures as dynamic relaxation is the main trend today; different mechanical models with 3, 4 or 6 degrees of freedom have been implemented for modelling the bending effect. However, there is a well-established class of mechanical models which has been specifically designed to reproduce the behaviour of very flexible structures and has not been used so far in form-finding of bending-active structures. These are derived from the so-called geometrically exact (or Reissner-Simo) beam theory, and they are able to treat arbitrarily large rotations and displacements. In this paper, we present the development of a form-finding tool based on Reissner-Simo¿s theory and the dynamic relaxation method, in order to find the static equilibrium of the system. The choice of form-finding parameters as the target curve length and the kinematic constraints at beam ends will determine the shape of the final structure in the `design-oriented¿ process. Several numerical examples on a range of structures are tested to validate the formulation., The financial support from the Spanish Ministry of Economy and Competitiveness through grant BIA2015-69330-P (MINECO) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design of bending-active tied arches by using a multi-objective optimization method

  • Bessini, J.
  • Shepherd, P.
  • Monleón Cremades, Salvador|||0000-0002-5726-749X
  • Lazaro, Carlos|||0000-0001-7255-7068
[EN] The design of bending-active structures is a challenging problem, due to the high non-linearity of the activation process, the coupling between member sizing, structural shape and the deformability and buckling sensitivity inherent in the resulting lightweight configurations. Due to the large number of form-finding variables, the choice of member sizing is one of the main difficulties at the conceptual phase. In this paper, authors propose a design tool to generate efficient structural configurations for braced bending-active tied arches using multi objective optimization strategies. Initially, a non-linear FE analysis is performed for each plausible configuration and at each generation of the optimization algorithm. In a second step, a genetic algorithm classifies the solutions and establishes new structural configurations according to best performance. Solutions are evaluated in terms of stresses in the active member and cables, and maximum deflections, as required by design codes for pedestrian bridges. Results are given in terms of non-dimensional parameters, in order to make them applicable to a wide variety of scales, The authors gratefully acknowledge the financial support from the Spanish Ministry of Economy and Competitiveness through grant BIA2015-69330-P (MINECO), the European Union programme through grant ERASMUS Traineeships 2017 - E+ and the support from CALTER Ingenieria and SOFiSTiK AG for providing a software license