Pasar al contenido principal

CALIBRACION DE MODELOS BIM MEDIANTE SENSORES DE BAJO COSTE PARA LA OPTIMIZACION ENERGETICA DE EDIFICIOS

BIA2017-86811-C2-2-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CASTILLA-LA MANCHA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 33
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Calibration of the descent local search algorithm parameters using orthogonal arrays

  • Gisbert Doménech, Carlos Miguel
  • Paya-Zaforteza, Ignacio
  • Lozano-Galant, Jose A.
  • Turmo, Jose
[EN] Solving optimization problems using heuristic algorithms requires the selection of its parameters. Traditionally, these parameters are selected by a trial and error process that cannot guarantee the quality of the results obtained because not all the potential combinations of parameters are checked. To fill this gap, this paper proposes the application of Taguchi's orthogonal arrays to calibrate the parameters of a heuristic optimization algorithm (the descent local search algorithm). This process is based on the study of the combinations of discrete values of the heuristic tool parameters and it enables optimization of the heuristic tool performance with a reduced computational effort. To check its efficiency, this methodology is applied to a technical challenge never studied before: the optimization of the tensioning process of cable-stayed bridges. The statistical improvement of the heuristic tool performance is studied by the optimization of the tensioning process of a real cable-stayed bridge. Results show that the proposed calibration technique provided robust values of the objective function (with lower minimum and mean values, and lower standard deviation) with reduced computational cost., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research projects BIA2013-47290-R and BIA2017-86811-C2-1-R founded with FEDER funds and directed by Professor Jose Turmo and through the research project BIA2017-86811-C2-2-R directed by Jose Antonio Lozano-Galant.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hygrothermal assessment of a traditional earthen wall in a dry Mediterranean climate

  • Mellado Mascaraque, Míguel Ángel
  • Castilla Pascual, Francisco
  • Oteiza San José, Ignacio
  • Aparicio Secanellas, Sofía
In this paper, we define the hygrothermal properties of a rammed earth wall through experimental analysis, relating thermal parameters to moisture content. These tests were conducted in Campo de Criptana (Ciudad Real, Spain), and the wall examined in this study is a 70-cm-thick north-facing rammed earth wall that is part of an occupied traditional dwelling Ambient and surface temperature and humidity values were monitored, along with the temperature and humidity at several points inside the wall and the heat flux on both sides of the wall. We recorded the wall’s behaviour regarding ambient comfort conditions for one year and obtained transmittance and conductivity values. Results show that it is quite difficult to analyse the hygrothermal behaviour of a rammed earth wall throughout the year, since the properties of the wall vary enormously. We found that, to evaluate the thermal behaviour of the wall, it was not appropriate to consider the same conductivity value for whole sections of the wall, as this value varies according to moisture content (generally between 0.39 and 0.55 Wm−1 K−1): we propose seasonal values for conductivity. Finally, the hygrothermal stability that these structures provide to the spaces they enclose has been shown, especially during hot and dry periods., Part of the devices used for this paper have been funded by the Ministerio de Economía y Competitividad of Spain as part of the research program ‘Call Retos Investigación' [BIA2016-7792-R and BIA2017-86811-C2-2-R (AEI/FEDER, UE)]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Studying the impacts of test condition and nonoptimal positioning of the sensors on the accuracy of the in-situ U-value measurement

  • Mobaraki, Behnam
  • Castilla Pascual, Francisco
  • Martínez, Arturo
  • Mellado Mascaraque, Miguel Ángel
  • Frutos Vázquez, Borja
  • Alonso, Carmen
The non-destructive thermal characterization of building envelopes relies significantly on various factors such as climate conditions, monitoring devices used, indoor environment, and conditioning systems. In the case of both the temperature-based method (TBM) and heat flux meter (HFM) approaches, U-value is determined considering the ideal condition of steady state. However, it is challenging to accurately define the true thermal condition of buildings when monitoring is affected by inherent uncertainties of the chosen approach and inadequate instrumentation of building envelopes. This paper presents the outcomes of an experimental campaign, that aimed to evaluate the impact of incorrectly positioned exterior sensors, on the precision of U-value measurements. This study simultaneously employed the TBM and HFM approaches. To enhance the accuracy of the results, rigorous outlier detection and statistical analysis were employed on the data collected from three autonomous monitoring systems. The findings of this study revealed that the applied data analysis yielded more satisfactory results for the TBM approach compared to HFM. However, regardless of the approach used, the effectiveness of outlier detection relied heavily on the accuracy of the monitoring systems. When removing an individual outlier, the monitoring systems characterized with higher accuracies provided U-values that were closer to the theoretical values, than less accurate ones., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research projects BIA2017-86811-C2-1-R , directed by Jose Turmo, BIA2017-86811-C2-2-R , directed by Jose Antonio Lozano-Galant, and PID2021-126405OB-C32 funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/. It is also to be noted that funding for this research has been provided to Behnam Mobaraki by Ministerio de Ciencia Innovación y Universidades : grant number: 2018-COB-9092 . Arturo Martínez acknowledges the support provided by the Consejo Nacional de Ciencia y Tecnología (CONACYT) and the Fundación del Instituto Nacional de Bellas Artes (FINBA) given through its doctorate scholarship program., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Application of low-cost sensors for accurate ambient temperature monitoring

  • Mobaraki, Behnam|||0000-0002-2924-643X
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Castilla Pascual, Francisco Javier
  • Lozano Galant, José Antonio
In structures with reduced monitoring budgets, the high cost of commercial metering devices is always an obstacle for monitoring structural health. This might be an issue when temperatures must be measured for both structural and environmental reasons. To fill this gap, in this paper, a novel monitoring system is proposed for the accurate measurement of indoor temperature in buildings. This protocol is characterized by its generality, as it can be easily adapted to measure any structural or environmental parameters on site. The proposed monitoring system uses from one to eight low-cost sensors to obtain multiple measurements of the ambient temperatures. The accuracy ranges of the developed monitoring systems with different numbers of sensors are statistically analysed. The results indicate that the discrepancy of the measurements decreases with the increase in the number of sensors, as the maximum standard deviation of 10 sensors (0.42) decreases to 0.32 and 0.27 for clusters of 20 and 30 sensors, respectively., This research was funded by the Spanish Ministry of Economy and Competitiveness (grant number BIA2013-47290-R, BIA2017-86811-C2-1-R, and BIA2017-86811-C2-2-R) and by the Universidad de Castilla La Mancha (grant number 2018-COB-9092)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A novel wireless low-cost inclinometer made from combining the measurements of multiple MEMS gyroscopes and accelerometers

  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Komary, Mahyad|||0000-0002-3219-2970
  • Alahmad, Ahmad|||0000-0002-6127-1897
  • Lozano Galant, José Antonio
  • Ramos Schneider, Gonzalo|||0000-0002-7263-8471
  • Turmo Coderque, José|||0000-0001-5001-2438
Structural damage detection using inclinometers is getting wide attention from researchers. However, the high price of inclinometers limits this system to unique structures with a relatively high structural health monitoring (SHM) budget. This paper presents a novel low-cost inclinometer, the low-cost adaptable reliable angle-meter (LARA), which combines five gyroscopes and five accelerometers to measure inclination. LARA incorporates Internet of Things (IoT)-based microcontroller technology enabling wireless data streaming and free commercial software for data acquisition. This paper investigates the accuracy, resolution, Allan variance and standard deviation of LARA produced with a different number of combined circuits, including an accelerometer and a gyroscope. To validate the accuracy and resolution of the developed device, its results are compared with those obtained by numerical slope calculations and a commercial inclinometer (HI-INC) in laboratory conditions. The results of a load test experiment on a simple beam model show the high accuracy of LARA (0.003 degrees). The affordability and high accuracy of LARA make it applicable for structural damage detection on bridges using inclinometers., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R. All these projects are funded with FEDER funds. The authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya, Catalunya, Spain for the funding provided through Agaur (2017 SGR 1482). It is also to be noted that funding for this research has been provided for Seyedmilad Komarizadehasl by Spanish Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Low-cost wireless structural health monitoring of bridges

  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Lozano Galant, Fidel|||0000-0001-9272-6172
  • Lozano Galant, José Antonio
  • Ramos Schneider, Gonzalo|||0000-0002-7263-8471
  • Turmo Coderque, José|||0000-0001-5001-2438
Nowadays, low-cost accelerometers are getting more attention from civil engineers to make Structural Health Monitoring (SHM) applications affordable and applicable to a broader range of structures. The present accelerometers based on Arduino or Raspberry Pi technologies in the literature share some of the following drawbacks: (1) high Noise Density (ND), (2) low sampling frequency, (3) not having the Internet’s timestamp with microsecond resolution, (4) not being used in experimental eigenfrequency analysis of a flexible and a less-flexible bridge, and (5) synchronization issues. To solve these problems, a new low-cost triaxial accelerometer based on Arduino technology is presented in this work (Low-cost Adaptable Reliable Accelerometer—LARA). Laboratory test results show that LARA has a ND of 51 µg/vHz, and a frequency sampling speed of 333 Hz. In addition, LARA has been applied to the eigenfrequency analysis of a short-span footbridge and its results are compared with those of a high-precision commercial sensor., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R. All these projects are funded with FEDER funds. The authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya, Catalunya, Spain, for the funding provided through Agaur (2017 SGR 1482). It is also to be noted that funding for this research has been provided for the Seyedmilad Komarizadehasl by the Spanish Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Traffic road emission estimation through visual programming algorithms and building information models: a case study

  • Collao Lazo, Jorge Alejandro
  • Ma, Haiying
  • Lozano Galant, José Antonio
  • Turmo Coderque, José|||0000-0001-5001-2438
Emissions from transportation have a severe impact on the current climate crisis. Therefore, the estimation of these pollutants requires precise measurements that integrate both traffic and vehicle fleet information within a specific country or area. However, the current estimation tools continue using vehicle fleet standards based on recommendations or local studies. A problem for the current estimation models arises due to the difficulty of centralizing the large number of vehicle statistics. This article has taken advantage of the capabilities of both visual programming tools and building information modeling (BIM) to centralize databases from different sources, generating a model that integrates current traffic data and vehicle fleet statistics. The proposed platform estimates emissions and the carbon footprint using TIER 1 emission factors recommended by the European Environmental Agency (EEA). This platform has been successfully applied to a case study to estimate the carbon footprint of the B-20 road in Barcelona, using current vehicle restriction scenarios. This case study presents a maximum difference of -2.72% compared with the estimations made by another similar report. This proposed platform more completely automates the communication among the equations and databases required to estimate traffic road emissions., This work was supported in part by the National Agency for Research and Development (ANID) for the Scholarship Program ``DOCTORADO BECAS CHILE/2019'' Folio under Grant 72200098, in part by the Spanish Ministry of Economy and Competitiveness and the FEDER fund through the projects under Grant BIA2017-86811-C2-1-R (directed by Jose Turmo) and Grant BIA2017-86811-C2-2-R, in part by the Secretaria d' Universitats i Recerca of the Generalitat de Catalunya through Agaur under Grant 2017 SGR 1481, and in part by the Technology Cooperation Project of Shanghai Qizhi Institute under Grant SYXF0120020109., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A novel data acquisition system for obtaining thermal parameters of building envelopes

  • Mobaraki, Behnam|||0000-0002-2924-643X
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Castilla Pascual, Francisco Javier
  • Lozano Galant, José Antonio
  • Porras Soriano, Rocío
Owing to the high energy consumption in the building sector, appraising the thermal performance of building envelopes is an increasing concern. Recently, a few in situ methodologies to diagnose the thermal parameters of buildings have been considered. However, because of their limitations such as low accuracy, limited number of measurements, and the high cost of monitoring devices, researchers are seeking a new alternative. In this study, a novel hyper-efficient Arduino transmittance-meter was introduced to overcome these limitations and determine the thermal parameters of building envelopes. Unlike conventional methodologies, the proposed transmittance-meter is based on synchronized measurements of different parameters necessary to estimate the transmittance parameter. To verify the applicability of the transmittance-meter, an experimental study was conducted wherein a temperature-controlled box model was thermally monitored, and the outputs of the transmittance-meter employed were compared with those captured by a commercial device. The results revealed a high level of reduction in cost and a low range of difference compared with the latter, thereby validating the applicability of the proposed thermal monitoring system., This research was funded by the Spanish Ministry of Economy and Competitiveness, grant numbers BIA2013-47290-R, BIA2017-86811-C2-1-R, and BIA2017-86811-C2-2-R, and Ministerio de Ciencia Innovación y Universidades: PRE2018-085172., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Towards the integration and automation of the design process for domestic drinking-water and sewerage systems with BIM

  • Atencio, Edison
  • Araya, Pablo
  • Oyarce, Francisco
  • Herrera, Rodrigo F.
  • Muñoz La Rivera, Felipe
  • Lozano Galant, Fidel|||0000-0001-9272-6172
The use of building information modelling (BIM) in construction projects is expanding, and its usability throughout building lifecycles, from planning and construction to operation and maintenance, is gaining increasing proof. In the design of domestic drinking-water and sewerage systems (DDWSSs), BIM focuses on coordinating disciplines and their design. Despite studies promoting BIM environments for DDWSSs that take into account the regulatory frameworks of corresponding countries, these efforts do not include the use of parametric tools that enhance the efficiency of the design process. Therefore, engineers still use conventional 2D design, which requires many rounds of iteration, and manual work is also generally still used. In this research, we developed and validated an intuitive methodology for solving a specific DDWSS problem, using a design science research method (DSRM) as an applied science approach. This was addressed by developing an artefact and validating it through two case studies. The obtained solution combines BIM models and parametric tools to automate the manual activities of the traditional design method. This article aims to bring abstract BIM concepts into practice and encourage researchers and engineers to adopt BIM for DDWSSs., This research was funded by Proyecto VRIEA-PUCV, grant number 039.427/2021, and the Grants for the Promotion of Research in the Department of Civil and Building Engineering, UCLM. This research was also funded by Spanish Ministry of Economy and Competitiveness provided through the research project BIA2013-47290-R, BIA2017-86811-C2-1-R and BIA2017-86811-C2-2-R. All these projects were funded with FEDER funds., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Direct simulation of the tensioning process of cable-stayed bridge cantilever construction

  • Farré Checa, Josep
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Ma, Haiying
  • Lozano Galant, José Antonio
  • Turmo Coderque, José|||0000-0001-5001-2438
The construction analysis of cable-stayed bridges plays a crucial role in the security of such structures because stresses and deflections attained during construction might exceed those in service. Although some commercial software are capable of simulating this, their main drawback is that they typically apply the stage superposition principle, owing to which the intermediate stages cannot be analyzed independently. Moreover, under this approach, the corrections of the tensioning process due to deviations in the cable stresses measured on site are more difficult. In this study, we conducted a direct simulation of the construction process of cable-stayed bridges built using the cantilever erection method by analyzing independent finite element models. To assure the achievement of a certain target state after construction (objective service stage, (OSS)), the prestressing forces in these models were modeled as imposed strains based on the unstressed length concept. Thus, the construction process can be simulated faster when time dependent phenomena are neglected. Moreover, this will lead to the direct simulation of the construction stages and OSS. To illustrate the application of the proposed method, a cable-stayed bridge was analyzed., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R founded with FEDER funds and directed by Professor José Turmo and through the research project BIA2017-86811-C2-2-R. Authors are also indebted to the Secretaria d'Universitats i Recerca de la Generalitat de Catalunya for the funding provided through AGAUR (2020 DI 112) and to the Shanghai Qizhi Institute (Grant number: SYXF0120020109) for providing financial support for this study., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Structural system identification including shear deformation of composite bridges from vertical deflections

  • Emadi, Seyyedbehrad
  • Lozano Galant, José Antonio
  • Xia, Ye
  • Ramos Schneider, Gonzalo|||0000-0002-7263-8471
  • Turmo Coderque, José|||0000-0001-5001-2438
Shear deformation effects are neglected in most structural system identification methods. This assumption might lead to important errors in some structures like built up steel or composite deep beams. Recently, the observability techniques were presented as one of the first methods for the inverse analysis of structures including the shear effects. In this way, the mechanical properties of the structures could be obtained from the nodal movements measured on static tests. One of the main controversial features of this procedure is the fact that the measurement set must include rotations. This characteristic might be especially problematic in those structures where rotations cannot be measured. To solve this problem and to increase its applicability, this paper proposes an update of the observability method to enable the structural identification including shear effects by measuring only vertical deflections. This modification is based on the introduction of a numerical optimization method. With this aim, the inverse analysis of several examples of growing complexity are presented to illustrate the validity and potential of the updated method., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Low-cost sensors accuracy study and enhancement strategy

  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Mobaraki, Behnam|||0000-0002-2924-643X
  • Ma, Haiying
  • Lozano Galant, José Antonio
  • Turmo Coderque, José|||0000-0001-5001-2438
Today, low-cost sensors in various civil engineering sectors are gaining the attention of researchers due to their reduced production cost and their applicability to multiple nodes. Low-cost sensors also have the advantage of easily connecting to low-cost microcontrollers such as Arduino. A low-cost, reliable acquisition system based on Arduino technology can further reduce the price of data acquisition and monitoring, which can make long-term monitoring possible. This paper introduces a wireless Internet-based low-cost data acquisition system consisting of Raspberry Pi and several Arduinos as signal conditioners. This study investigates the beneficial impact of similar sensor combinations, aiming to improve the overall accuracy of several sensors with an unknown accuracy range. The paper then describes an experiment that gives valuable information about the standard deviation, distribution functions, and error level of various individual low-cost sensors under different environmental circumstances. Unfortunately, these data are usually missing and sometimes assumed in numerical studies targeting the development of structural system identification methods. A measuring device consisting of a total of 75 contactless ranging sensors connected to two microcontrollers (Arduinos) was designed to study the similar sensor combination theory and present the standard deviation and distribution functions. The 75 sensors include: 25 units of HC-SR04 (analog), 25 units of VL53L0X, and 25 units of VL53L1X (digital)., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R, directed by José Turmo, and BIA2017-86811-C2-2-R, directed by Jose Antonio Lozano-Galant. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya, Catalunya, Spain for the funding provided through Agaur (2017 SGR 1482). It is also to be noted that funding for this research has been provided for Seyedmilad Komarizadehasl by the Spanish Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Simplified calculation of shear rotations for first-order shear deformation theory in deep bridge beams

  • Emadi, Seyyedbehrad
  • Ma, Haiying
  • Lozano Galant, José Antonio
  • Turmo Coderque, José|||0000-0001-5001-2438
Nodal rotations are produced by bending and shear effects and bending rotations can be easily calculated using Euler–Bernoulli’s stiffness matrix method. Nevertheless, shear rotations are traditionally neglected, as their effects are practically negligible in most structures. This assumption might lead to significant errors in the simulation of the rotations in some structures, as well as the wrong identification of the mechanical properties in inverse analysis. Despite its important role, no other works studying the calculation of shear rotations in deep beams were found in the literature. To fill this gap, after illustrating the errors of commercial software regarding calculating the rotations in deep beams, this study proposed a simple and intuitive method to calculate shear rotations in both isostatic and statically redundant beams. The new method calculates the shear rotation for all segments separately and introduces the result to the total rotation of the structure. This method can be applied to find the shear rotation in a redundant structure as well. A parametric study was carried out to calculate slenderness ratios to determine in what structural systems the shear rotations can be neglected. In addition, the errors in the inverse analysis of deep beams were parametrically studied to determine the role of shear rotation in different structural systems. Finally, to validate the application of the method in actual structures, a construction stage of a composite bridge was analyzed., The authors are indebted to the projects PID2021-126405OB-C31 and PID2021-126405OB-C32 funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/, BIA2017-86811-C2-1-R and BIA2017-86811-C2-2-R funded by FEDER funds., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

In situ U-value measurement of building envelopes through continuous low-cost monitoring

  • Mobaraki, Behnam|||0000-0002-2924-643X
  • Castilla Pascual, Francisco Javier
  • Lozano Galant, Fidel|||0000-0001-9272-6172
  • Lozano Galant, José Antonio
  • Porras Soriano, Rocío
Accurate characterization of the transmittance parameter (U-value) is decisive when assessing energy demand or energy consumption of buildings. The U-value of building envelopes is usually estimated using commercial devices. These commercial solutions present several drawbacks such as their high cost, the fact that they require contact sensors to measure the surface temperature on a limited number of points and the difficulty to meet the standards for ideal measuring conditions. To solve these issues, a Hyper Efficient Arduino Transmittance-meter (HEAT) was recently proposed by the authors for monitoring the U-value based on low-cost technology. This system is now completed with the recording of time series of data based on Internet of Things protocols and the use of non-contact temperature sensors. Studying the applicability, in this case HEAT is used for characterizing walls and ceiling of a building room. To check its performance, the obtained results were compared with those derived from standards and conventional building modelling tools. The results show that the developed system is reliable according to the U-values obtained and expected for the monitored elements, with an acceptable range of uncertainty compared to the ones presented in the literature, The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research projects BIA2017-86811-C2-1-R, directed by José Turmo, BIA2017-86811-C2-2-R, directed by José Antonio Lozano-Galant and [SBPLY/19/180501/000094 project: “5D sensory system in BIM environments for characterization and energy analysis of buildings” directed by Antonio Adán and Francisco Castilla. All these projects are funded with FEDER funds. It is also to be noted that funding for this research has been provided to Behnam Mobaraki for his Ph.D. program by the Spanish Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades (grant number: 2018-COB-9092)
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Using RPA for performance monitoring of dynamic SHM applications

  • Atencio, Edison
  • Komarizadehasl, Seyedmilad|||0000-0002-9010-2611
  • Lozano Galant, José Antonio
  • Aguilera, Edison
Robotic Process Automation (RPA) is a source of growing applications in a number of industries both as an individual technology and as a complement to other technologies (such as Internet of Things (IoT)). RPA allows the automation of human activities on a computer, especially when these activities are repetitive and high in volume. RPA saves man-hours and increases the productive capacity of the processes. The application of RPA in civil engineering is still in its early stages, and there has been little work on the subject in the literature. This paper presents RPA technology, for the first time in the literature, as a long-term management, control, and auto fault correction process for a low-cost accelerometer that can be used in SHM applications. However, this process requires a significant number of man-hours to stay operational, given the architecture of its applications. With the application of an RPA implementation workflow formulated based on the Design Science Research Method (DSRM), the management and control of the data acquisition process of a low-cost accelerometer located on a structural column are automated and put into operation in this study. RPA also made it possible to automatically detect and notify users of errors in the process, restart the process, and bring the process back online every time errors occurred. In this way, an automated process was obtained that operated continually and freed up human labour., The Spanish Ministry of Economy and Competitiveness: BIA2017-86811-C2-1-R; The Spanish Ministry of Economy and Competitiveness: BIA2017-86811-C2-2-R; The Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya, Catalunya, Spain: 2017 SGR 1482; Spanish Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant: PRE2018-083238., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Robust static structural system identification using rotations

  • Lei, Jun
  • Lozano Galant, José Antonio
  • Xu, Dong
  • Zhang, Feng
  • Turmo Coderque, José|||0000-0001-5001-2438
Deflections are commonly measured in the static structural system identification of structures. Comparatively less attention has been paid to the possibility of measuring rotations for structural system identification purposes, despite the many advantages of using inclinometers, such as a high resolution and being reference free. Although some work using rotations can be found in the literature, this paper, for the very first time, proposes a statistical analysis that justifies the theoretical advantage of measuring rotations. The analytical expressions for the target parameters are obtained via static structural system identification using the constrained observability method first. Combined with the inverse distribution theory, the probability density function of the estimations of the target parameters can be obtained. Comparative studies on a simply supported bridge and a frame structure demonstrate the advantage of measuring rotations regarding the unbiasedness and the extent of variation in the estimations. To achieve robust parameter estimations, four strategies to use redundant rotations are proposed and compared. Numerical verifications on a bridge structure and a high-rise building have shown promising results., This work was partially funded by the Scientific Research Fund of the Institute of Engineering Mechanics, China Earthquake Administration (grant no. 2019 EEEVL0401), National Natural Science Foundation of China (grant nos. 51878484), Spanish Ministry of Economy and Competitiveness and the FEDER fund through the projects BIA2013-47290-R and BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R, and the Natural Science Foundation of Shenzhen (grant no. JCYJ20190806143618723). The authors are also indebted to the Secretaria d’Universitats i Recerca de la Generalitat de Catalunya for the funding provided through Agaur (2017 SGR 1481). Part of this work was carried out through a collaborative agreement between Tongji University (China) and the Technical University of Catalonia, UPC. This included an exchange of faculty financed by the Chinese government. The financial support from the Chinese High-End Foreign Experts program (GDW20143100115) is greatly appreciated. Funding for this research has been provided to Jun Lei by the Chinese Scholarship Council through its program No. 201506260116 and by the Spanish Ministry of Economy and Competitiveness through its program BES-2014-07022 for his PhD stays., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

BIM visual programming tools applications in infrastructure projects: a state-of-the-art review

  • Collao Lazo, Jorge Alejandro
  • Lozano Galant, Fidel|||0000-0001-9272-6172
  • Lozano Galant, José Antonio
  • Turmo Coderque, José|||0000-0001-5001-2438
The Building Information Modeling (BIM) methodology improves architectural and infrastructure projects by digitizing their processes throughout their life cycle stages, such as design, construction, management, monitoring, and operation. In recent years, the automation of these processes has been favored by the use of visual programming (VP) tools that have replaced conventional programming languages for visual schemes. The use of these tools in architectural projects is becoming increasing popular. However, this is not the case in infrastructure projects, for which the use of VP algorithms remains scarce. The aim of this work is to encourage both scholars and engineers to implement VP tools in infrastructure projects. For this purpose, this work reviews, for the first time in the literature, the state-of-the-art and future research trends of VP tools in infrastructure projects., This work was funded by the National Agency for Research and Development (ANID) for the Scholarship Program “DOCTORADO BECAS CHILE/2019”–Folio n°72200098 and by the Spanish Ministry of Economy and Competitiveness and the FEDER fund through the projects BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R. Authors are also indebted to the Secretaria d’ Universitats i Recerca of the Generalitat de Catalunya for the funding provided through Agaur (2017 SGR 1481)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Studying the impacts of test condition and nonoptimal positioning of the sensors on the accuracy of the in-situ U-value measurement

  • Mobaraki, Behnam|||0000-0002-2924-643X
  • Castilla Pascual, Francisco Javier
The non-destructive thermal characterization of building envelopes relies significantly on various factors such as climate conditions, monitoring devices used, indoor environment, and conditioning systems. In the case of both the temperature-based method (TBM) and heat flux meter (HFM) approaches, U-value is determined considering the ideal condition of steady state. However, it is challenging to accurately define the true thermal condition of buildings when monitoring is affected by inherent uncertainties of the chosen approach and inadequate instrumentation of building envelopes. This paper presents the outcomes of an experimental campaign, that aimed to evaluate the impact of incorrectly positioned exterior sensors, on the precision of U-value measurements. This study simultaneously employed the TBM and HFM approaches. To enhance the accuracy of the results, rigorous outlier detection and statistical analysis were employed on the data collected from three autonomous monitoring systems. The findings of this study revealed that the applied data analysis yielded more satisfactory results for the TBM approach compared to HFM. However, regardless of the approach used, the effectiveness of outlier detection relied heavily on the accuracy of the monitoring systems. When removing an individual outlier, the monitoring systems characterized with higher accuracies provided Uvalues that were closer to the theoretical values, than less accurate ones, The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research projects BIA2017-86811-C2-1-R, directed by Jose Turmo, BIA2017-86811-C2-2-R, directed by Jose Antonio Lozano-Galant, and PID2021-126405OB-C32 funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/. It is also to be noted that funding for this research has been provided to Behnam Mobaraki by Ministerio de Ciencia Innovaci´ on y Universidades: grant number: 2018-COB-9092. Arturo Martínez acknowledges the support provided by the Consejo Nacional de Ciencia y Tecnología (CONACYT) and the Fundaci´ on del Instituto Nacional de Bellas Artes (FINBA) given through its doctorate scholarship program
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Low-cost wireless structural health monitoring of bridges

  • Komarizadehasl, Seyedmilad
  • Lozano Galant, Fidel
  • Lozano Galant, José Antonio
  • Ramos Schneider, Gonzalo
  • Turmo Coderque, José
Nowadays, low-cost accelerometers are getting more attention from civil engineers to make Structural Health Monitoring (SHM) applications affordable and applicable to a broader range of structures. The present accelerometers based on Arduino or Raspberry Pi technologies in the literature share some of the following drawbacks: (1) high Noise Density (ND), (2) low sampling frequency, (3) not having the Internet’s timestamp with microsecond resolution, (4) not being used in experimental eigenfrequency analysis of a flexible and a less-flexible bridge, and (5) synchronization issues. To solve these problems, a new low-cost triaxial accelerometer based on Arduino technology is presented in this work (Low-cost Adaptable Reliable Accelerometer—LARA). Laboratory test results show that LARA has a ND of 51 µg/vHz, and a frequency sampling speed of 333 Hz. In addition, LARA has been applied to the eigenfrequency analysis of a short-span footbridge and its results are compared with those of a high-precision commercial sensor., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R. All these projects are funded with FEDER funds. The authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya, Catalunya, Spain, for the funding provided through Agaur (2017 SGR 1482). It is also to be noted that funding for this research has been provided for the Seyedmilad Komarizadehasl by the Spanish Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Low-cost sensors accuracy study and enhancement strategy

  • Komarizadehasl, Seyedmilad
  • Mobaraki, Behnam
  • Ma, Haiying
  • Lozano Galant, José Antonio
  • Turmo Coderque, José
Today, low-cost sensors in various civil engineering sectors are gaining the attention of researchers due to their reduced production cost and their applicability to multiple nodes. Low-cost sensors also have the advantage of easily connecting to low-cost microcontrollers such as Arduino. A low-cost, reliable acquisition system based on Arduino technology can further reduce the price of data acquisition and monitoring, which can make long-term monitoring possible. This paper introduces a wireless Internet-based low-cost data acquisition system consisting of Raspberry Pi and several Arduinos as signal conditioners. This study investigates the beneficial impact of similar sensor combinations, aiming to improve the overall accuracy of several sensors with an unknown accuracy range. The paper then describes an experiment that gives valuable information about the standard deviation, distribution functions, and error level of various individual low-cost sensors under different environmental circumstances. Unfortunately, these data are usually missing and sometimes assumed in numerical studies targeting the development of structural system identification methods. A measuring device consisting of a total of 75 contactless ranging sensors connected to two microcontrollers (Arduinos) was designed to study the similar sensor combination theory and present the standard deviation and distribution functions. The 75 sensors include: 25 units of HC-SR04 (analog), 25 units of VL53L0X, and 25 units of VL53L1X (digital)., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R, directed by José Turmo, and BIA2017-86811-C2-2-R, directed by Jose Antonio Lozano-Galant. All these projects are funded with FEDER funds. Authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya, Catalunya, Spain for the funding provided through Agaur (2017 SGR 1482). It is also to be noted that funding for this research has been provided for Seyedmilad Komarizadehasl by the Spanish Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Traffic road emission estimation through visual programming algorithms and building information models: a case study

  • Collao Lazo, Jorge Alejandro
  • Ma, Haiying
  • Lozano Galant, José Antonio
  • Turmo Coderque, José
Emissions from transportation have a severe impact on the current climate crisis. Therefore, the estimation of these pollutants requires precise measurements that integrate both traffic and vehicle fleet information within a specific country or area. However, the current estimation tools continue using vehicle fleet standards based on recommendations or local studies. A problem for the current estimation models arises due to the difficulty of centralizing the large number of vehicle statistics. This article has taken advantage of the capabilities of both visual programming tools and building information modeling (BIM) to centralize databases from different sources, generating a model that integrates current traffic data and vehicle fleet statistics. The proposed platform estimates emissions and the carbon footprint using TIER 1 emission factors recommended by the European Environmental Agency (EEA). This platform has been successfully applied to a case study to estimate the carbon footprint of the B-20 road in Barcelona, using current vehicle restriction scenarios. This case study presents a maximum difference of -2.72% compared with the estimations made by another similar report. This proposed platform more completely automates the communication among the equations and databases required to estimate traffic road emissions., This work was supported in part by the National Agency for Research and Development (ANID) for the Scholarship Program ``DOCTORADO BECAS CHILE/2019'' Folio under Grant 72200098, in part by the Spanish Ministry of Economy and Competitiveness and the FEDER fund through the projects under Grant BIA2017-86811-C2-1-R (directed by Jose Turmo) and Grant BIA2017-86811-C2-2-R, in part by the Secretaria d' Universitats i Recerca of the Generalitat de Catalunya through Agaur under Grant 2017 SGR 1481, and in part by the Technology Cooperation Project of Shanghai Qizhi Institute under Grant SYXF0120020109., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

In situ U-value measurement of building envelopes through continuous low-cost monitoring

  • Mobaraki, Behnam
  • Castilla Pascual, Francisco Javier
  • Lozano Galant, Fidel
  • Lozano Galant, José Antonio
  • Porras Soriano, Rocío
Accurate characterization of the transmittance parameter (U-value) is decisive when assessing energy demand or energy consumption of buildings. The U-value of building envelopes is usually estimated using commercial devices. These commercial solutions present several drawbacks such as their high cost, the fact that they require contact sensors to measure the surface temperature on a limited number of points and the difficulty to meet the standards for ideal measuring conditions. To solve these issues, a Hyper Efficient Arduino Transmittance-meter (HEAT) was recently proposed by the authors for monitoring the U-value based on low-cost technology. This system is now completed with the recording of time series of data based on Internet of Things protocols and the use of non-contact temperature sensors. Studying the applicability, in this case HEAT is used for characterizing walls and ceiling of a building room. To check its performance, the obtained results were compared with those derived from standards and conventional building modelling tools. The results show that the developed system is reliable according to the U-values obtained and expected for the monitored elements, with an acceptable range of uncertainty compared to the ones presented in the literature, The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research projects BIA2017-86811-C2-1-R, directed by José Turmo, BIA2017-86811-C2-2-R, directed by José Antonio Lozano-Galant and [SBPLY/19/180501/000094 project: “5D sensory system in BIM environments for characterization and energy analysis of buildings” directed by Antonio Adán and Francisco Castilla. All these projects are funded with FEDER funds. It is also to be noted that funding for this research has been provided to Behnam Mobaraki for his Ph.D. program by the Spanish Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades (grant number: 2018-COB-9092), Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Robust static structural system identification using rotations

  • Lei, Jun
  • Lozano Galant, José Antonio
  • Xu, Dong
  • Zhang, Feng
  • Turmo Coderque, José
Deflections are commonly measured in the static structural system identification of structures. Comparatively less attention has been paid to the possibility of measuring rotations for structural system identification purposes, despite the many advantages of using inclinometers, such as a high resolution and being reference free. Although some work using rotations can be found in the literature, this paper, for the very first time, proposes a statistical analysis that justifies the theoretical advantage of measuring rotations. The analytical expressions for the target parameters are obtained via static structural system identification using the constrained observability method first. Combined with the inverse distribution theory, the probability density function of the estimations of the target parameters can be obtained. Comparative studies on a simply supported bridge and a frame structure demonstrate the advantage of measuring rotations regarding the unbiasedness and the extent of variation in the estimations. To achieve robust parameter estimations, four strategies to use redundant rotations are proposed and compared. Numerical verifications on a bridge structure and a high-rise building have shown promising results., This work was partially funded by the Scientific Research Fund of the Institute of Engineering Mechanics, China Earthquake Administration (grant no. 2019 EEEVL0401), National Natural Science Foundation of China (grant nos. 51878484), Spanish Ministry of Economy and Competitiveness and the FEDER fund through the projects BIA2013-47290-R and BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R, and the Natural Science Foundation of Shenzhen (grant no. JCYJ20190806143618723). The authors are also indebted to the Secretaria d’Universitats i Recerca de la Generalitat de Catalunya for the funding provided through Agaur (2017 SGR 1481). Part of this work was carried out through a collaborative agreement between Tongji University (China) and the Technical University of Catalonia, UPC. This included an exchange of faculty financed by the Chinese government. The financial support from the Chinese High-End Foreign Experts program (GDW20143100115) is greatly appreciated. Funding for this research has been provided to Jun Lei by the Chinese Scholarship Council through its program No. 201506260116 and by the Spanish Ministry of Economy and Competitiveness through its program BES-2014-07022 for his PhD stays., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Using RPA for performance monitoring of dynamic SHM applications

  • Atencio, Edison
  • Komarizadehasl, Seyedmilad
  • Lozano Galant, José Antonio
  • Aguilera, Edison
Robotic Process Automation (RPA) is a source of growing applications in a number of industries both as an individual technology and as a complement to other technologies (such as Internet of Things (IoT)). RPA allows the automation of human activities on a computer, especially when these activities are repetitive and high in volume. RPA saves man-hours and increases the productive capacity of the processes. The application of RPA in civil engineering is still in its early stages, and there has been little work on the subject in the literature. This paper presents RPA technology, for the first time in the literature, as a long-term management, control, and auto fault correction process for a low-cost accelerometer that can be used in SHM applications. However, this process requires a significant number of man-hours to stay operational, given the architecture of its applications. With the application of an RPA implementation workflow formulated based on the Design Science Research Method (DSRM), the management and control of the data acquisition process of a low-cost accelerometer located on a structural column are automated and put into operation in this study. RPA also made it possible to automatically detect and notify users of errors in the process, restart the process, and bring the process back online every time errors occurred. In this way, an automated process was obtained that operated continually and freed up human labour., The Spanish Ministry of Economy and Competitiveness: BIA2017-86811-C2-1-R; The Spanish Ministry of Economy and Competitiveness: BIA2017-86811-C2-2-R; The Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya, Catalunya, Spain: 2017 SGR 1482; Spanish Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant: PRE2018-083238., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Application of low-cost sensors for accurate ambient temperature monitoring

  • Mobaraki, Behnam
  • Komarizadehasl, Seyedmilad
  • Castilla Pascual, Francisco Javier
  • Lozano Galant, José Antonio
In structures with reduced monitoring budgets, the high cost of commercial metering devices is always an obstacle for monitoring structural health. This might be an issue when temperatures must be measured for both structural and environmental reasons. To fill this gap, in this paper, a novel monitoring system is proposed for the accurate measurement of indoor temperature in buildings. This protocol is characterized by its generality, as it can be easily adapted to measure any structural or environmental parameters on site. The proposed monitoring system uses from one to eight low-cost sensors to obtain multiple measurements of the ambient temperatures. The accuracy ranges of the developed monitoring systems with different numbers of sensors are statistically analysed. The results indicate that the discrepancy of the measurements decreases with the increase in the number of sensors, as the maximum standard deviation of 10 sensors (0.42) decreases to 0.32 and 0.27 for clusters of 20 and 30 sensors, respectively., This research was funded by the Spanish Ministry of Economy and Competitiveness (grant number BIA2013-47290-R, BIA2017-86811-C2-1-R, and BIA2017-86811-C2-2-R) and by the Universidad de Castilla La Mancha (grant number 2018-COB-9092)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Towards the integration and automation of the design process for domestic drinking-water and sewerage systems with BIM

  • Atencio, Edison
  • Araya, Pablo
  • Oyarce, Francisco
  • Herrera, Rodrigo F.
  • Muñoz La Rivera, Felipe
  • Lozano Galant, Fidel
The use of building information modelling (BIM) in construction projects is expanding, and its usability throughout building lifecycles, from planning and construction to operation and maintenance, is gaining increasing proof. In the design of domestic drinking-water and sewerage systems (DDWSSs), BIM focuses on coordinating disciplines and their design. Despite studies promoting BIM environments for DDWSSs that take into account the regulatory frameworks of corresponding countries, these efforts do not include the use of parametric tools that enhance the efficiency of the design process. Therefore, engineers still use conventional 2D design, which requires many rounds of iteration, and manual work is also generally still used. In this research, we developed and validated an intuitive methodology for solving a specific DDWSS problem, using a design science research method (DSRM) as an applied science approach. This was addressed by developing an artefact and validating it through two case studies. The obtained solution combines BIM models and parametric tools to automate the manual activities of the traditional design method. This article aims to bring abstract BIM concepts into practice and encourage researchers and engineers to adopt BIM for DDWSSs., This research was funded by Proyecto VRIEA-PUCV, grant number 039.427/2021, and the Grants for the Promotion of Research in the Department of Civil and Building Engineering, UCLM. This research was also funded by Spanish Ministry of Economy and Competitiveness provided through the research project BIA2013-47290-R, BIA2017-86811-C2-1-R and BIA2017-86811-C2-2-R. All these projects were funded with FEDER funds., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

BIM visual programming tools applications in infrastructure projects: a state-of-the-art review

  • Collao Lazo, Jorge Alejandro
  • Lozano Galant, Fidel
  • Lozano Galant, José Antonio
  • Turmo Coderque, José
The Building Information Modeling (BIM) methodology improves architectural and infrastructure projects by digitizing their processes throughout their life cycle stages, such as design, construction, management, monitoring, and operation. In recent years, the automation of these processes has been favored by the use of visual programming (VP) tools that have replaced conventional programming languages for visual schemes. The use of these tools in architectural projects is becoming increasing popular. However, this is not the case in infrastructure projects, for which the use of VP algorithms remains scarce. The aim of this work is to encourage both scholars and engineers to implement VP tools in infrastructure projects. For this purpose, this work reviews, for the first time in the literature, the state-of-the-art and future research trends of VP tools in infrastructure projects., This work was funded by the National Agency for Research and Development (ANID) for the Scholarship Program “DOCTORADO BECAS CHILE/2019”–Folio n°72200098 and by the Spanish Ministry of Economy and Competitiveness and the FEDER fund through the projects BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R. Authors are also indebted to the Secretaria d’ Universitats i Recerca of the Generalitat de Catalunya for the funding provided through Agaur (2017 SGR 1481)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Simplified calculation of shear rotations for first-order shear deformation theory in deep bridge beams

  • Emadi, Seyyedbehrad
  • Ma, Haiying
  • Lozano Galant, José Antonio
  • Turmo Coderque, José
Nodal rotations are produced by bending and shear effects and bending rotations can be easily calculated using Euler–Bernoulli’s stiffness matrix method. Nevertheless, shear rotations are traditionally neglected, as their effects are practically negligible in most structures. This assumption might lead to significant errors in the simulation of the rotations in some structures, as well as the wrong identification of the mechanical properties in inverse analysis. Despite its important role, no other works studying the calculation of shear rotations in deep beams were found in the literature. To fill this gap, after illustrating the errors of commercial software regarding calculating the rotations in deep beams, this study proposed a simple and intuitive method to calculate shear rotations in both isostatic and statically redundant beams. The new method calculates the shear rotation for all segments separately and introduces the result to the total rotation of the structure. This method can be applied to find the shear rotation in a redundant structure as well. A parametric study was carried out to calculate slenderness ratios to determine in what structural systems the shear rotations can be neglected. In addition, the errors in the inverse analysis of deep beams were parametrically studied to determine the role of shear rotation in different structural systems. Finally, to validate the application of the method in actual structures, a construction stage of a composite bridge was analyzed., The authors are indebted to the projects PID2021-126405OB-C31 and PID2021-126405OB-C32 funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/, BIA2017-86811-C2-1-R and BIA2017-86811-C2-2-R funded by FEDER funds., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A novel data acquisition system for obtaining thermal parameters of building envelopes

  • Mobaraki, Behnam
  • Komarizadehasl, Seyedmilad
  • Castilla Pascual, Francisco Javier
  • Lozano Galant, José Antonio
  • Porras Soriano, Rocío
Owing to the high energy consumption in the building sector, appraising the thermal performance of building envelopes is an increasing concern. Recently, a few in situ methodologies to diagnose the thermal parameters of buildings have been considered. However, because of their limitations such as low accuracy, limited number of measurements, and the high cost of monitoring devices, researchers are seeking a new alternative. In this study, a novel hyper-efficient Arduino transmittance-meter was introduced to overcome these limitations and determine the thermal parameters of building envelopes. Unlike conventional methodologies, the proposed transmittance-meter is based on synchronized measurements of different parameters necessary to estimate the transmittance parameter. To verify the applicability of the transmittance-meter, an experimental study was conducted wherein a temperature-controlled box model was thermally monitored, and the outputs of the transmittance-meter employed were compared with those captured by a commercial device. The results revealed a high level of reduction in cost and a low range of difference compared with the latter, thereby validating the applicability of the proposed thermal monitoring system., This research was funded by the Spanish Ministry of Economy and Competitiveness, grant numbers BIA2013-47290-R, BIA2017-86811-C2-1-R, and BIA2017-86811-C2-2-R, and Ministerio de Ciencia Innovación y Universidades: PRE2018-085172., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A novel wireless low-cost inclinometer made from combining the measurements of multiple MEMS gyroscopes and accelerometers

  • Komarizadehasl, Seyedmilad
  • Komary, Mahyad
  • Alahmad, Ahmad
  • Lozano Galant, José Antonio
  • Ramos Schneider, Gonzalo
  • Turmo Coderque, José
Structural damage detection using inclinometers is getting wide attention from researchers. However, the high price of inclinometers limits this system to unique structures with a relatively high structural health monitoring (SHM) budget. This paper presents a novel low-cost inclinometer, the low-cost adaptable reliable angle-meter (LARA), which combines five gyroscopes and five accelerometers to measure inclination. LARA incorporates Internet of Things (IoT)-based microcontroller technology enabling wireless data streaming and free commercial software for data acquisition. This paper investigates the accuracy, resolution, Allan variance and standard deviation of LARA produced with a different number of combined circuits, including an accelerometer and a gyroscope. To validate the accuracy and resolution of the developed device, its results are compared with those obtained by numerical slope calculations and a commercial inclinometer (HI-INC) in laboratory conditions. The results of a load test experiment on a simple beam model show the high accuracy of LARA (0.003 degrees). The affordability and high accuracy of LARA make it applicable for structural damage detection on bridges using inclinometers., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R directed by José Turmo and BIA2017-86811-C2-2-R. All these projects are funded with FEDER funds. The authors are also indebted to the Secretaria d’ Universitats i Recerca de la Generalitat de Catalunya, Catalunya, Spain for the funding provided through Agaur (2017 SGR 1482). It is also to be noted that funding for this research has been provided for Seyedmilad Komarizadehasl by Spanish Agencia Estatal de Investigación del Ministerio de Ciencia Innovación y Universidades grant and the Fondo Social Europeo grant (PRE2018-083238)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Direct simulation of the tensioning process of cable-stayed bridge cantilever construction

  • Farré Checa, Josep
  • Komarizadehasl, Seyedmilad
  • Ma, Haiying
  • Lozano Galant, José Antonio
  • Turmo Coderque, José
The construction analysis of cable-stayed bridges plays a crucial role in the security of such structures because stresses and deflections attained during construction might exceed those in service. Although some commercial software are capable of simulating this, their main drawback is that they typically apply the stage superposition principle, owing to which the intermediate stages cannot be analyzed independently. Moreover, under this approach, the corrections of the tensioning process due to deviations in the cable stresses measured on site are more difficult. In this study, we conducted a direct simulation of the construction process of cable-stayed bridges built using the cantilever erection method by analyzing independent finite element models. To assure the achievement of a certain target state after construction (objective service stage, (OSS)), the prestressing forces in these models were modeled as imposed strains based on the unstressed length concept. Thus, the construction process can be simulated faster when time dependent phenomena are neglected. Moreover, this will lead to the direct simulation of the construction stages and OSS. To illustrate the application of the proposed method, a cable-stayed bridge was analyzed., The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research project BIA2017-86811-C2-1-R founded with FEDER funds and directed by Professor José Turmo and through the research project BIA2017-86811-C2-2-R. Authors are also indebted to the Secretaria d'Universitats i Recerca de la Generalitat de Catalunya for the funding provided through AGAUR (2020 DI 112) and to the Shanghai Qizhi Institute (Grant number: SYXF0120020109) for providing financial support for this study., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Structural system identification including shear deformation of composite bridges from vertical deflections

  • Emadi, Seyyedbehrad
  • Lozano Galant, José Antonio
  • Xia, Ye
  • Ramos Schneider, Gonzalo
  • Turmo Coderque, José
Shear deformation effects are neglected in most structural system identification methods. This assumption might lead to important errors in some structures like built up steel or composite deep beams. Recently, the observability techniques were presented as one of the first methods for the inverse analysis of structures including the shear effects. In this way, the mechanical properties of the structures could be obtained from the nodal movements measured on static tests. One of the main controversial features of this procedure is the fact that the measurement set must include rotations. This characteristic might be especially problematic in those structures where rotations cannot be measured. To solve this problem and to increase its applicability, this paper proposes an update of the observability method to enable the structural identification including shear effects by measuring only vertical deflections. This modification is based on the introduction of a numerical optimization method. With this aim, the inverse analysis of several examples of growing complexity are presented to illustrate the validity and potential of the updated method., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Studying the impacts of test condition and nonoptimal positioning of the sensors on the accuracy of the in-situ U-value measurement

  • Mobaraki, Behnam
  • Castilla Pascual, Francisco Javier
The non-destructive thermal characterization of building envelopes relies significantly on various factors such as climate conditions, monitoring devices used, indoor environment, and conditioning systems. In the case of both the temperature-based method (TBM) and heat flux meter (HFM) approaches, U-value is determined considering the ideal condition of steady state. However, it is challenging to accurately define the true thermal condition of buildings when monitoring is affected by inherent uncertainties of the chosen approach and inadequate instrumentation of building envelopes. This paper presents the outcomes of an experimental campaign, that aimed to evaluate the impact of incorrectly positioned exterior sensors, on the precision of U-value measurements. This study simultaneously employed the TBM and HFM approaches. To enhance the accuracy of the results, rigorous outlier detection and statistical analysis were employed on the data collected from three autonomous monitoring systems. The findings of this study revealed that the applied data analysis yielded more satisfactory results for the TBM approach compared to HFM. However, regardless of the approach used, the effectiveness of outlier detection relied heavily on the accuracy of the monitoring systems. When removing an individual outlier, the monitoring systems characterized with higher accuracies provided Uvalues that were closer to the theoretical values, than less accurate ones, The authors are indebted to the Spanish Ministry of Economy and Competitiveness for the funding provided through the research projects BIA2017-86811-C2-1-R, directed by Jose Turmo, BIA2017-86811-C2-2-R, directed by Jose Antonio Lozano-Galant, and PID2021-126405OB-C32 funded by FEDER funds—A Way to Make Europe and Spanish Ministry of Economy and Competitiveness MICIN/AEI/10.13039/501100011033/. It is also to be noted that funding for this research has been provided to Behnam Mobaraki by Ministerio de Ciencia Innovaci´ on y Universidades: grant number: 2018-COB-9092. Arturo Martínez acknowledges the support provided by the Consejo Nacional de Ciencia y Tecnología (CONACYT) and the Fundaci´ on del Instituto Nacional de Bellas Artes (FINBA) given through its doctorate scholarship program, Postprint (published version)