Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of Parkinson&apos, s Disease on Functional Mobility at Different Stages

  • Mollà-Casanova, Sara
  • PEDRERO, J.F.
  • Inglés, Marta
  • Lopez Pascual, Juan
  • Muñoz-Gómez, Elena
  • Aguilar-Rodríguez, Marta
  • Sempere-Rubio, Nuria
  • Serra-Añó, Pilar
[EN] Introduction: Specific functional assessments to determine the progression of Parkinson¿s Disease (PD) are important to slow down such progression and better plan rehabilitation. This study aimed to explore possible differences in the performance of different functional tasks included in a mobility test using sensors embedded in an Android device, in people at different PD stages. Materials and Methods: Eighty-seven participants with PD agreed to participate in this cross-sectional study. They were assessed once using an inertial sensor and variables related to functional status were recorded (i.e., MLDisp, APDisp, DispA, Vrange, MLRange, PTurnSit, PStand, TTime, and RTime). Results: There was significant impairment of the vertical range during gait between stages I and II. Further, when stages II and III were compared, the sit-to-stand power was significantly impaired, and the total time required to complete the test increased significantly (p < 0.05). Even more significant differences were obtained when stages I and III were compared, in particular, dysfunction in postural control, vertical range, sit to stand power and total time. Finally, there were no significant differences between stages in the medial-lateral displacements and reaction time (p > 0.05). Conclusion: Functional mobility becomes more significantly impaired in the PD population as the PD stages progress. This implies impaired postural control, decreased ability to sit down or stand up from a chair, increased metabolic cost during walking, and overall slowing-down of motor function., This work was supported by the Universitat de Valencia (INV19-01-13-07, 2019) and developed within the framework of the IBERUS project. Technological Network of Biomedical Engineering applied to degenerative pathologies of the neuromusculoskeletal system in clinical and outpatient settings (CER-20211003), CERVERA Network financed by the Ministry of Science and Innovation through the Centre for Industrial Technological Development (CDTI), charged to the General State Budgets 2021, and the Recovery, Transformation, and Resilience Plan.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Protocol for Forearm Pronosupination Strength Measuring in Different Postures: Reliability and Influence of Relevant Factors

  • Herrera-Ligero, Cristina
  • Sánchez Zuriaga, Daniel
  • Martínez-Iranzo, Ursula
  • Pitarch Corresa, Salvador
  • De Rosario Martínez, Helios
[EN] Importance: Despite the importance of pronosupination strength, which is key in daily activities, current evaluation protocols are disparate, and results differ regarding the influence of factors such as gender, age, limb dominance, or posture. Objective: To design a reliable device to measure pronation and supination torques in different forearm positions, considering the influence of gender, age, and limb dominance. Design: Reliability study with analysis of intrarater and interrater repeatability and examination of the influence of different factors on the strength of pronation and supination. Setting: Biomechanical analysis laboratory of the Instituto de Biomecánica de Valencia. Participants: Convenience sample of 39 healthy male and female participants, ages 18 to 65 yr. Outcomes and measures: Pronation strength and supination strength were studied in five forearm positions: 30° and 60° of supination, neutral rotation, and 30° and 60° of pronation. The influence of gender, age, and limb dominance was studied using repeated-measures analysis of variance. Intrarater and interrater reliabilities were studied in 17 participants, and the intraclass correlation coefficients (ICCs) were calculated from three measurement sessions. Results: Except for 60° of pronation, all ICCs ranged from .72 to .97. Gender, limb dominance, and posture significantly affected pronosupination strength (p < .05), with the highest supination strength at 60° of pronation and the highest pronation strength at 60° of supination. Conclusions and relevance: In using this reliable pronosupination torque assessment device and standardized protocol in the clinical setting, clinicians must consider the influence of gender, limb dominance, and forearm posture. What This Article Adds: The results of this study will allow occupational therapists to establish differences between patients' functionality in comparison with healthy individuals and to design recovery treatments and facilitate performance of manual tasks, considering which are the most advantageous positions to exert force. Furthermore, the developed device can be used to monitor the evolution of these torques in an objective and reliable manner., This article was developed within the framework of the IBERUS project, a technological network of biomedical engineering applied to degenerative pathologies of the neuromusculoskeletal system in clinical and outpatient settings (CER-20211003) , and the CERVERA Network, financed by the Ministry of Science and Innovation through the Center for Industrial Technological Development, charged to the General State Budgets 2021 and the Recovery, Transformation and Resilience Plan.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Classification of Parkinson&apos, s disease stages with a two-stage deep neural network

  • PEDRERO, J.F.
  • Serra Añó, Pilar
  • Mollà-Casanova, Sara
  • Lopez Pascual, Juan
  • Belda-Lois, Juan-Manuel|||0000-0002-7648-799X
Research Activity (IMAMCA/2022/7) supported by Instituto Valenciano de Competitividad Empresarial (IVACE) and Valencian Regional Government (GVA), and supported by the Universitat de València [INV19-01-13-07, 2019] funding and developed within the framework of the IBERUS project. Technological Network of Biomedical Engineering applied to degenerative pathologies of the neuromusculoskeletal system in clinical and outpatient settings (CER-20211003), CERVERA Network financed by the Ministry of Science and Innovation through the Center for Industrial Technological Development (CDTI), charged to the General State Budgets 2021, and the Recovery, Transformation, and Resilience Plan.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Variabilidad interobservador del baremo de tráfico (Ley 35/2015) y utilidad de las pruebas biomecánicas en la valoración de las secuelas

  • Herrera-Ligero, Cristina
  • Vivas Broseta, María José
  • Ferrer Gómez, Carmen
  • De Rosario Martínez, Helios
  • Garrido-Lestache López-Belmonte, Elvira
  • Bermejo Bosch, Ignacio
[ES] Introducción La Ley 35/2015 valora daños y perjuicios en los accidentes de circulación y trata de garantizar una respuesta igualitaria ante situaciones idénticas. La valoración funcional biomecánica (VFB) es una prueba médica complementaria que aporta objetividad en la evaluación de la cervicalgia postraumática. Este estudio analiza la variabilidad interobservador del sistema de valoración de la Ley 35/2015 y estudia el efecto de la VFB y del perfil del evaluador en la determinación de secuelas. Material y métodos para ello, 49 profesionales de la valoración del daño corporal evaluaron 5 casos clínicos de accidentados con cervicalgia postraumática; un mes más tarde, 35 de los anteriores valoraron los mismos casos incluyendo informe de VFB. Resultados hay una elevada variabilidad en la determinación de los días de perjuicio personal (coeficientes kappa entre 0,04 y 0,073) con o sin VFB; una elevada variabilidad interobservador en la valoración de las secuelas en los casos sin VFB (coeficientes kappa entre 0,022 y 0,044), que mejora discretamente con VFB (coeficientes kappa entre 0,128 y 0,26), aún mostrando concordancia débil. El resultado de la VFB tiene influencia en la determinación de las secuelas (p¿<¿0,01), no así el perfil del evaluador. Más del 79,4% de los evaluadores encontraron útiles las pruebas para poner de manifiesto o confirmar sintomatología, recuperación o simulación. Conclusiones existe variabilidad en la aplicación de la Ley 35/2015 para la valoración de los accidentados de tráfico con cervicalgia postraumática entre los profesionales del daño corporal. La VFB resulta de utilidad para los evaluadores y tiene influencia en la determinación de las secuelas., [EN] Introduction Law 35/2015 assesses damages in traffic accidents and tries to guarantee an equal response to identical situations. Biomechanical functional assessment (BFA) is a complementary medical test that provides objectivity in the evaluation of post-traumatic neck pain. This study analyzes the interobserver variability of the assessment system defined by Law 35/2015 and studies the effect of having BFA tests and the profile of the evaluator in determining sequelae. Materials and methods To do this, 49 professionals in the assessment of bodily injury evaluated 5 clinical cases of accident victims with post-traumatic neck pain; a month later, 35 of them assessed the same cases including a BFA report. Results The results show high variability in determining the days of personal injury (Kappa coefficients between 0.04 and 0.073) with or without BFA; high interobserver variability in the assessment of sequelae in cases without BFA (Kappa coefficients between 0.022 and 0.044), which slightly improves with BFA (Kappa coefficients between 0.128 and 0.26), even showing weak concordance. The BFA has an influence on the determination of sequelae (p¿<¿0.01), but the profile of the evaluator does not. More than 79.4% of the evaluators found the BFA tests useful to reveal or to confirm symptoms, recovery, or simulation. Conclusions There is variability in the application of Law 35/2015 for the assessment of traffic accidents among professionals of bodily injury. The BFA is useful for evaluators and influences the determination of sequelae., Actividad desarrollada en el marco del proyecto IBERUS. Red Tecnológica de Ingeniería Biomédica aplicada a patologías degenerativas del sistema neuromusculoesquelético en entornos clínicos y extrahospitalarios (CER-20211003), Red CERVERA financiada por el Ministerio de Ciencia e Innovación a través del Centro para el Desarrollo Tecnológico Industrial (CDTI), con cargo a los Presupuestos Generales del Estado 2021 y el Plan de Recuperación, Transformación y Resiliencia. Parte de esta investigación se ha llevado a cabo en el marco del Proyecto Mov-Hum (Generación de criterios para la valoración y diseño de productos basados en el estudio de modelos biomecánicos de miembro superior y raquis), que cuenta con el apoyo del Instituto Valenciano de Competitividad Empresarial (IVACE) y la cofinanciación en un 50% por la Unión Europea a través del Fondo Europeo de Desarrollo Regional (FEDER), dentro del Programa Operativo FEDER de la Comunitat Valenciana 2014-2020, con el número de expediente IMDEEA/2018/89.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Accuracy of a 3D temporal scanning system for gait analysis: Comparative with a marker-based photogrammetry system

  • RUESCAS NICOLAU, ANA VIRGINIA
  • De Rosario Martínez, Helios
  • Basso Della-Vedova, Fermín
  • Parrilla Bernabé, Eduardo
  • Lopez Pascual, Juan
  • Juan, M. Carmen|||0000-0002-8764-1470
[EN] Background Combining the accuracy of marker¿based stereophotogrammetry and the usability and comfort of markerless human movement analysis is a difficult challenge. 3D temporal scanners are a promising solution, since they provide moving meshes with thousands of vertices that can be used to analyze human movements. Research question Can a 3D temporal scanner be used as a markerless system for gait analysis with the same accuracy as traditional, marker¿based stereophotogrammetry systems? Methods A comparative study was carried out using a 3D temporal scanner synchronized with a marker¿based stereophotogrammetry system. Two gait cycles of twelve healthy adults were measured simultaneously, extracting the positions of key anatomical points from both systems, and using them to analyze the 3D kinematics of the pelvis, right hip and knee joints. Measurement differences of marker positions and joint angles were described by their root mean square. A t¿test was performed to rule out instrumental errors, and an F¿test to evaluate the amplifications of marker position errors in dynamic conditions. Results The differences in 3D landmark positions were between 1.9 and 2.4 mm in the reference pose. Marker position errors were significantly increased during motion in the medial¿lateral and vertical directions. The angle relative errors were between 3% and 43% of the range of motion, with the greatest difference being observed in hip axial rotation. Significance The differences in the results obtained between the 3D temporal scanner and the marker¿based system were smaller than the usual errors due to lack of accuracy in the manual positioning of markers on anatomical landmarks and to soft¿tissue artefacts. That level of accuracy is greater than other markerless systems, and proves that such technology is a good alternative to traditional, marker¿based motion capture., Activity developed within the framework of the IBERUS project. Technological Network of Biomedical Engineering applied to degenerative pathologies of the neuromusculoskeletal system in clinical and outpatient settings (CER-20211003), CERVERA Network financed by the Ministry of Science and Innovation through the Center for Industrial Technological Development (CDTI), charged to the General State Budgets 2021 and the Recovery, Transformation and Resilience Plan.