Pasar al contenido principal

¿QUIEN HA SIDO?

CGL2014-59841-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Probability fields revisited in the context of ensemble Kalman filtering

  • Xu, Teng
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
Hu et al. (2013) proposed an approach to update complex geological fades models generated by multiple-point geostatistical simulation while keeping geological and statistical consistency. Their approach is based on mapping the fades realization onto the spatially uncorrelated uniform random numbers used by the sequential multiple-point simulation to generate the facies realization itself. The ensemble Kalman filter was then used to update the uniform random number realizations, which were then used to generate a new fades realization by multiple-point simulation. This approach has not a good performance that we attribute to the fact that, being the probabilities random and spatially uncorrelated, their correlation with the state variable (piezometric heads) is very weak, and the Kalman gain is always small. The approach is reminiscent of the probability field simulation, which also maps the conductivity realizations onto a field of uniform random numbers; although the mapping now is done using the local conditional distribution functions built based on a prior statistical model and the conditioning data. Contrary to Hu et al. (2013) approach, this field of uniform random numbers, termed a probability field, displays spatial patterns related to the conductivity spatial patterns, and, therefore, the correlation between probabilities and state variable is as strong as the correlation between conductivities and state variable could be. Similarly to Hu et al. (2013), we propose to use the ensemble Kalman filter to update the probability fields, and show that the existence of this correlation between probability values and state variables provides better results., The first author acknowledges the financial support from the China Scholarship Council (CSC). Part of this work was done while the second author was on sabbatical with the Kansas Geological Survey, Kansas University, Lawrence, KS, USA, which was funded by the Spanish Ministry of Education, Culture and Sports through grant PRX14/00501. Financial support to carry out this work was also received from the Spanish Ministry of Economy and Competitiveness through project CGL2014-59841-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Joint identification of contaminant source and aquifer geometry in a sandbox experiment with the restart ensemble Kalman filter

  • Chen, Zi
  • Xu, Teng
  • Zanini, Andrea
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
[EN] Contaminant source identification is a key problem in handling groundwater pollution events. The ensemble Kalman filter (EnKF) is used for the spatiotemporal identification of a point contaminant source in a sandbox experiment, together with the identification of the position and length of a vertical plate inserted in the sandbox that modifies the geometry of the system. For the identification of the different parameters, observations in time of solute concentration are used, but not of piezometric head data since they were not available. A restart version of the EnKF is utilized because it is necessary to restart the forecast from time zero after each parameter update. The results show that the restart EnKF is capable of identifying both contaminant source information and aquifer-geometry-related parameters together with an uncertainty estimate of such identification., Financial support to carry out this work was received from the Spanish Ministry of Economy and Competitiveness through project CGL2014-59841-P, and from the Spanish Ministry of Education, Culture and Sports through a fellowship for the mobility of professors in foreign research and higher education institutions to the second author, reference PRX17/00150. The authors also would like to thank Universita degli Studi di Parma for providing the experimental equipment and data
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Simultaneous identification of a contaminant source and hydraulic conductivity via the restart normal-score ensemble Kalman filter

  • Xu, Teng
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
[EN] Detecting where and when a contaminant entered an aquifer from observations downgradient of the source is a difficult task; this identification becomes more challenging when the uncertainty about the spatial distribution of hydraulic conductivity is accounted for. In this paper, we have implemented an application of the restart normal-score ensemble Kalman filter (NS-EnKF) for the simultaneous identification of a contaminant source and the spatially variable hydraulic conductivity in an aquifer. The method is capable of providing estimates of the spatial location, initial release time, the duration of the release and the mass load of a point-contamination event, plus the spatial distribution of hydraulic conductivity together with an assessment of the estimation uncertainty of all the parameters. The method has been applied in synthetic aquifers exhibiting both Gaussian and non-Gaussian patterns. The identification is made possible by assimilating in time both piezometric head and concentration observations from an array of observation wells. The method is demonstrated in three different synthetic scenarios that combine hydraulic conductivities with unimodal and bimodal histograms, and releases in high and low conductivity zones. The results prove that the specific implementation of the EnKF is capable of recovering the source parameters with some uncertainty and of recovering the main patterns of heterogeneity of the hydraulic conductivity fields by assimilating a sufficient number of state variable observations. The proposed approach is an important step towards contaminant source identification in real aquifers, which may have logconductivity spatial distributions with either Gaussian or non-Gaussian features, yet, it is still far from practical applications since the transport parameters, the external sinks and sources and the initial and boundary conditions are assumed known., Financial support to carry out this work was received from the Spanish Ministry of Economy and Competitiveness through project CGL2014-59841-P. The authors acknowledge the Associate Editor, and the anonymous reviewers for their thoughtful and constructive comments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A comparison between ES-MDA and restart EnKF for the purpose of the simultaneous identification of a contaminant source and hydraulic conductivity

  • Xu, Teng
  • Chen, Zi
  • Lu, Chunhui
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
[EN] Understanding a contaminant source may help in a better management and risk assessment of a polluted aquifer. However, contaminant source information may not be available when a pollutant is detected in a drinking well. The restart ensemble Kalman filter (restart EnKF, also named r-EnKF) has been demonstrated in synthetic and laboratory experiments as an efficient solution for the identification of a contaminant source. Recently, the ensemble smoother with multiple data assimilation (ES-MDA) has been proposed as an alternative to the r-EnKF as a more efficient solution given that the r-EnKF needs to restart the simulation of the state equation from time zero after each data assimilation step. An analysis, in a synthetic aquifer, of the accuracy of the ES-MDA for the simultaneous identification of a contaminant source and the spatial distribution of hydraulic conductivity by assimilating both piezometric head and concentration observations is carried out using the r-EnKF as a benchmark. The conclusion is that the ES-MDA can outperform the r-EnKF, but the expected speed advantage, associated with the possibility of assimilating all data at once, does not exist. For the ES-MDA to reach the same level of accuracy as the r-EnKF, the number of multiple data assimilations must be large, and final computing time is similar for both approaches. However, the ES-MDA can do much better than the r-EnKF if the number of iterations increases even further, with the consequent increase of computational cost., Financial support to carry out this work was received from the Spanish Ministry of Economy and Competitiveness through project CGL2014-59841-P, and from the Spanish Ministry of Education, Culture and Sports through a fellowship for the mobility of professors in foreign research and higher education institutions of reference to the second author, reference PRX17/00150. Teng Xu also acknowledges the financial support from the Fundamental Research Funds for the Central Universities (B200201015) and Jiangsu Specially-Appointed Professor Program (B19052). Chunhui Lu acknowledges the financial support from the National Natural Science Foundation of China (51679067 and 51879088), and Fundamental Research Funds for the Central Universities (B200204002).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimization of pulsed thermoelectric materials using simulated annealing and non-linear finite elements

  • Moreno-Navarro, Pablo|||0000-0002-2787-976X
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
  • Pérez-Aparicio, José L.
[EN] The objective of this work is to determine the optimal shape, gains and duration of an electric pulse applied to a Peltier cell, together with the length of the thermoelectric to maximize cooling while min- imizing electric consumption. For this purpose, a fully coupled, multiphysics, dynamic finite-element model, which solves for the thermal, electric and mechanical fields is used. Because of the demanding computing requirements of the optimization process, a special mesh is designed and a convergence anal- ysis is carried out before using the multiphysics model. The highly non-linear optimization is done by simulated annealing, a heuristic algorithm in the Markov chain Monte-Carlo family. A preliminary para- metric investigation is presented, analyzing the impact of some of the parameters. The results of this pre- liminary analysis help to understand the effect of the different shapes in the evolution of the cold face temperature. Some of these results are expected and have already been discussed elsewhere, but others can only be explained after further analysis and a full system modeling. Pulse optimization is multiobjec- tive and multiparametric, i.e., it can consider several targets such as maximizing the cooling temperature, the cooling duration or others. The trade-offs between the different targets are studied. In all cases, stres- ses inside the thermoelement are examined at all points, and the pulses must meet the restriction that an equivalent stress is not above the allowable value., This research was partially supported by the grants, Haut-de-France Region (CR Picardie, 120-2015-RDISTRUCT-000010), EU funding (FEDER, RDISTRUCT-000010) for Chaire-de-Mecanique, and Spanish Ministry of Economy and Competitiveness grant CGL2014-59841-P. These supports are gratefully acknowledged
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Joint identification of contaminant source location, initial release time, and initial solute concentration in an aquifer via ensemble Kalman filtering

  • Xu, Teng
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
[EN] When a contaminant is detected in a drinking well, source location, initial contaminant release time, and initial contaminant concentration are, in many cases, unknown; the responsible party may have disappeared and the identification of when and where the contamination happened may become difficult. Although contaminant source identification has been studied extensively in the last decades, we proposeto our knowledge, for the first timethe use of the ensemble Kalman filter (EnKF), which has proven to be a powerful algorithm for inverse modeling. The EnKF is tested in a two-dimensional synthetic deterministic aquifer, identifying, satisfactorily, the source location, the release time, and the release concentration, together with an assessment of the uncertainty associated with this identification., Financial support to carry out this work was received from the Spanish Ministry of Economy and Competitiveness through project CGL2014-59841-P. All data used in this analysis are available from the authors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Inverse sequential simulation: Performance and implementation details

  • Xu, Teng
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
For good groundwater flow and solute transport numerical modeling, it is important to characterize the formation properties. In this paper, we analyze the performance and important implementation details of a new approach for stochastic inverse modeling called inverse sequential simulation (iSS). This approach is capable of characterizing conductivity fields with heterogeneity patterns difficult to capture by standard multiGaussian-based inverse approaches. The method is based on the multivariate sequential simulation principle, but the covariances and cross-covariances used to compute the local conditional probability distributions are computed by simple co-kriging which are derived from an ensemble of conductivity and piezometric head fields, in a similar manner as the experimental covariances are computed in an ensemble Kalman filtering. A sensitivity analysis is performed on a synthetic aquifer regarding the number of members of the ensemble of realizations, the number of conditioning data, the number of piezometers at which piezometric heads are observed, and the number of nodes retained within the search neighborhood at the moment of computing the local conditional probabilities. The results show the importance of having a sufficiently large number of all of the mentioned parameters for the algorithm to characterize properly hydraulic conductivity fields with clear non-multiGaussian features. © 2015 Elsevier Ltd. All rights reserved., The first author acknowledgs the financial support from the China Scholarship Council (CSC [2010]3010). Financial support to carry out this work was also received from the Spanish Ministry of Economy and Competitiveness through Project CGL2014-59841-P. We thank the three reviewers for their thorough review and their insightful comments, which have helped to improve the final manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of non-Gaussian conductivities and porosities with hydraulic heads, solute concentrations, and water temperatures

  • Xu, Teng
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
Reliable characterization of hydraulic parameters is important for the understanding of groundwater flow and solute transport. The normal-score ensemble Kalman filter (NS-EnKF) has proven to be an effective inverse method for the characterization of non-Gaussian hydraulic conductivities by assimilating transient piezometric head data, or solute concentration data. Groundwater temperature, an easily captured state variable, has not drawn much attention as an additional state variable useful for the characterization of aquifer parameters. In this work, we jointly estimate non-Gaussian aquifer parameters (hydraulic conductivities and porosities) by assimilating three kinds of state variables (piezometric head, solute concentration, and groundwater temperature) using the NS-EnKF. A synthetic example including seven tests is designed, and used to evaluate the ability to characterize hydraulic conductivity and porosity in a non-Gaussian setting by assimilating different numbers and types of state variables. The results show that characterization of aquifer parameters can be improved by assimilating groundwater temperature data and that the main patters of the non-Gaussian reference fields can be retrieved with more accuracy and higher precision if multiple state variables are assimilated., Financial support to carry out this work was provided by the Spanish Ministry of Economy and Competitiveness through project CGL2014-59841-P. All data used in this analysis are available from the authors.