Pasar al contenido principal

NUEVAS TECNOLOGIAS EN PROCESOS DE TRATAMIENTO DE AGUAS MEDIANTE EL USO DE COMPOSITES BASADOS EN MINERALES DE ARCILLA MODIFICADOS

CTM2013-42306-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pairing micropollutants and clay-composite sorbents for efficient water treatment: Filtration and modeling at a pilot scale

  • Lelario, Filomena
  • Gardi, Ido
  • Mishael, Y. G.
  • Dolev, Noam
  • Undabeytia López, Tomás
  • Nir, Shlomo
  • Scrano, Laura
  • Bufo, Sabino A.
8 páginas.-- 3 figuras.-- 3 tablas.-- 55 referencias.-- Supplementary data to this article can be found online at http://dx.doi.org/10.1016/j.clay.2016.12.029., Organically modified clay minerals have been widely developed, tested and employed as sorbents for organic pollutants. However, the process of pollutant-composite pairing is not commonly addressed, which would be valuable for efficient pollutant filtration by such sorbents. This study presents an approach for achieving efficient pollutant removal by large-scale composite filters, based on pairing chemically compatible pollutants and composites and by employing a predictive filtration model. The removal of three organic pollutants, simazine, sulfentrazone and diclofenac by lab-scale filtration columns containing one of three sorbents, a polymer-, micelle- or liposome-clay composite, was measured. Understanding the factors governing pollutant-organic modifier interactions enabled to pair an efficient sorbent to each pollutant. The high removal (80%) of simazine by the polymer composite, was attributed to hydrogen bonds and π-π interactions, compared to less than 20% removal by the surfactant composites. The removal of the anionic diclofenac (pKa = 4.1) was mainly governed by electrostatic attraction, explaining its high removal by the most positively charge sorbent, the liposome composite. Sulfentrazone (pKa = 6.5) removal was mostly affected by micellar solubilization and upon its removal, the zeta potential of the micelle-composite was not reduced as obtained for diclofenac removal. The filtration of the successful pairs was modelled to determine sorbent capacity and adsorption and desorption rate constants. The pilot filtration experiments were well described by the model and demonstrated efficient removal of paired pollutants and sorbents. Model simulations predicted promising treatment at environmental pollutant concentrations in the μg L− 1 range. This pairing approach along with model calculations can be a strong and valid tool for efficient pollutant-sorbent filtration., Supported by The European Commission in the framework of the Project ‘Diffusion nanotechnology based devices for water treatment and recycling – NANOWAT’ [ENPI CBC MED I-B/2.1/049, Grant No. 7/1997]. T. Undabeytia also acknowledges financial support by the Spanish government [FEDER funded grant CTM2013-42306-R]. I. Gardi acknowledges the support by the Israeli Ministry of Science, Technology and Space [grant 3-12362]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Technological applications of organo-montmorillonites in the removal of pyrimethanil from water: adsorption/desorption and flocculation studies

  • Flores, F. M.
  • Undabeytia López, Tomás
  • Morillo González, Esmeralda
  • Torres Sánchez, R. M.
14 páginas.-- 7 figuras.-- 5 tablas.-- r eferencias.-- Electronic supplementary material The online version of this article(doi:10.1007/s11356-017-9016-3) contains supplementary material,which is available to authorized users, Pyrimethanil (2-aniline-4, 6-dimethylpyrimidine, PRM) is used in fruit packing plants to control fungal infections and diseases. The effluents greatly polluted with this fungicide, as a point source contamination, need to be technologically treated for their regeneration before they reach water bodies. This work evaluates the use of organo-montmorillonites, synthetized in our laboratory, for their application in adsorption and coagulation/flocculation processes for the removal of PRM from water. The adsorption-desorption performance of PRM in a raw montmorillonite (Mt) and several organo-montmorillonites (organo-Mt) obtained by different amounts and types of exchanged surfactants (octadecyltrimethylammonium (ODTMA) and didodecyldimethylammonium (DDAB) bromides and benzyltrimethylammonium chloride (BTMA)) was studied. The PRM adsorption on raw Mt was assigned mainly to an interlayer occupancy, while hydrophobic interactions between PRM and the surfactants in the exchanged samples increased PRM adsorption, which was correlated with the surfactant loading. PRM desorption showed irreversible behavior in raw Mt, which changed to reversible for organo-Mt samples, and was also correlated with the increase of surfactant loading. Two of the organo-Mt with high surfactant loading (twice the CEC) were assayed for the removal of commercial PRM in coagulation/flocculation tests, and their performance was compared to that of the native clay (Mt). The use of the organo-Mt produced flocculation at a very low ratio (0.5 g L−1), whereas no flocculation was observed with Mt. These results proved the feasibility of the use of organo-Mt for the treatment of wastewater contaminated with PRM using a low organo-Mt/liquid ratio, Financial support of the Argentine Ministry of Science, Technology and Innovation—FONARSEC FS-Nano 008 and the Spanish Ministry of Economy and Competitiveness (Ref. CTM2013-42306-R, supported by funds from the European Regional Development Fund) and the Spanish Agency for International Cooperation for Development—Spanish Ministry of Education A/023433/10-09 is gratefully acknowledged. R.M.T.S. is a member of the National Council of Scientific and Technological Research (CONICET) and F.M. Flores acknowledges CONICET and Argentine (BEC.AR) fellowships., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Slow-release formulations of the herbicide picloram by using Fe–Al pillared montmorillonite

  • Marco-Brown, J. L.
  • Undabeytia López, Tomás
  • Torres Sánchez, R. M.
  • dos Santos Afonso, Maria
11 páginas.-- 8 figuras.-- 4 tablas.-- referencias.-- The online version of this article (doi: 10.1007/s11356-017-8699-9) contains supplementary material, which is available to authorized users., Slow-release formulations of the herbicide picloram (PCM, 4-amino-3,5,6-trichloropyridine-2-carboxylic acid) were designed based on its adsorption on pillared clays (pillared clays (PILCs)) for reducing the water-polluting risk derived from its use in conventional formulations. Fe–Al PILCs were synthesized by the reaction of Na-montmorillonite (SWy-2) with base-hydrolyzed solutions of Fe and Al. The Fe/(Fe + Al) ratios used were 0.15 and 0.50. The PCM adsorption isotherms on Fe–Al PILCs were well fitted to Langmuir and Freundlich models. The PCM adsorption capacity depended on the Fe content in the PILCs. Slow-release formulations were prepared by enhanced adsorption of the herbicide from PCM-cyclodextrin (CD) complexes in solution. CDs were able to enhance up to 2.5-fold the solubility of PCM by the formation of inclusion complexes where the ring moiety of the herbicide was partially trapped within the CD cavity. Competitive adsorption of anions such as sulfate, phosphate, and chloride as well as the FTIR analysis of PCM-PILC complexes provided evidence of formation of inner sphere complexes of PCM-CD on Fe–Al PILCs. Release of the herbicide in a sandy soil was lower from Fe–Al PILC formulations relative to a PCM commercial formulation., The authors acknowledge Universidad de Buenos Aires, Secretaria de Ciencia y Técnica Projects, Ministerio de Ciencia y Técnica, Agencia Nacional de Promoción Científica y Tecnológica, MINCyT-ANPCyT-FONCyT, and Consejo Nacional de Investigaciones Científicas y Técnicas de la República Argentina (CONICET) for financial support. J.L.M-B acknowledges CONICET fellowship. This research was also supported by the MEC Project CTM2013-42306-R and the Junta de Andalucía Project P12-RNM1897. Both projects received funding by the European Social Fund. The authors also acknowledge the Analytical Services of Seville University (CITIUS) for SEM-EDS measurements., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Adsorption of the tallow amine ethoxylate surfactant Ethomeen T/15 on montmorillonite

  • Borrego Sánchez, Ana
  • Gómez-Pantoja, Eulalia
  • Morillo González, Esmeralda
  • Undabeytia López, Tomás
  • Sainz-Díaz, C. Ignacio
11 páginas.-- 12 figuras.-- 29 referencias.-- Supplementary data to this article can be found online at https://doi.org/10.1016/j.clay.2018.03.026., The use of biocompatible surfactants is interesting to increase the properties of clay minerals in an environment-friendly process of charge capacity of organics. The adsorption of the surfactant Ethomeen T/15 in the interlayer space of montmorillonite was studied experimentally and computationally. Different proportions of surfactant, water and phyllosilicate were explored. Calculations at molecular level were performed using forcefields based on empirical interatomic potentials. The surfactant is likely to be adsorbed within the montmorillonite interlayer space forming hydrogen bonds between the H atoms of surfactant and the basal tetrahedral O atoms of the montmorillonite interlayer surface. These hydrogen bonds and the electrostatic interactions between cations and phyllosilicate surface are the main driving forces of the adsorption. Molecular dynamics simulations have indicated several possible conformations of the surfactant molecules in the interlayer space. The combination of molecular modeling, thermal analysis, Fourier transformed infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) has allowed the interpretation of this adsorption process, Authors are thankful to the CSIC Computational Center for computation facilities and the Andalusian RNM-1897 , and the Spanish MINECO CTM2009-07425 , CTM2013-42306-R , FIS2013-48444-C2-2-P , and FIS2016-77692-C2-2-P project grants for the financial support of this research., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Removal of pharmaceuticals from water by clay-cationic starch sorbents

  • Lozano, V.
  • Gardi, Ido
  • Nir, Shlomo
  • Undabeytia López, Tomás
9 páginas.--10 figuras.-- 2 tablas.-- 42 referencias.-- Supplementary data related to this article can be found at https://doi.org/10.1016/j.jclepro.2018.04.174., Significant concerns have been raised up due to the presence of organic micropollutants in surface waters. The ability of two polymer-clay sorbents based on a functionalized cationic starch was examined for the removal of three pharmaceuticals: atenolol, sulfamethoxazole and diclofenac sodium. In batch experiments, the complex which exhibited a planar conformation of the polymer on the clay surface and higher cationic charge density showed higher sorption of diclofenac and sulfamethoxazole over those of the composite with a loops and tails configuration, but similar with atenolol. The introduction of functional moieties on the polymers that are capable to create a network of hydrogen-bonds with the pollutants promoted their removal as revealed by thermal and infrared techniques: diclofenac molecules formed an ion pair including hydrogen bonds through their secondary amine groups; sulfamethoxazole sorbed by strong electrostatic interactions followed by proton transfer involving its sulphon-nitrogen group and the hydroxyl moieties of the composite. Filtration experiments showed a better performance of the columns made of the composite with higher cationic charge density on the removal of diclofenac and sulfamethoxazole over that of granular activated carbon. The filtration processes were successfully modeled by using an adsorption-convection model which enabled predictions under different operational conditions used in drinking water plants. Experimental removal of diclofenac by filtration within the range found in environmental concentrations was in good agreement with the predicted amounts., This research was funded by the grant NANOWAT (ref. I-B/2.1/049) within the ENPI-CBC-MED programme of the European Union; and the Spanish Ministry of Economy and Competitiveness through the projects CTM2013-42306-R and CTM2016-77168-R supported by the European Regional Development Fund (FEDER)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Grafted Sepiolites for the Removal of Pharmaceuticals in Water Treatment

  • Undabeytia López, Tomás
  • Madrid Díaz, Fernando
  • Vázquez Cabello, J.
  • Pérez-Martínez, José Ignacio
29 referencias.-, The increased detection of pharmaceuticals in finished drinking water has become a growing cause of concern in recent years. The removal of atenolol, ranitidine, and carbamazepine by sepiolite, following functionalization of its surface by organosilane grafting, constituted the subject of this investigation. Silylated surfaces include octyl, γ-aminopropyl, 3-chloropropyl, and triphenyl moieties. The sorption of atenolol and ranitidine was higher on sepiolite functionalized with 3-chloropropyl, while carbamazepine showed a higher sorption on sepiolite with triphenyl groups. Filtration experiments of both ranitidine and carbamazepine on octyl- and triphenyl-sepiolite, respectively, showed a higher retention of ranitidine in comparison to carbamazepine, in spite of the fact that the number of sorption sites was lower due to its higher binding rate., This research was supported by the MEC projects CTM2013-42306-R and CTM2016-77168-R. Both projects received funding from the European Social Fund., Peer reviewed