Pasar al contenido principal

SISTEMAS CATALITICOS EFICIENTES Y DE BAJO COSTE PARA LA ELIMINACION DE CONTAMINANTES DEL ESCAPE DE AUTOMOVILES CON MOTORES DE COMBUSTION DE ULTIMA GENERACION

CTQ2015-64801-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSIDAD DE ALICANTE
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

A simple approach to develop tailored mesoporosity in nanostructured heteropolysalts

  • Alcañiz Monge, Juan
  • Trautwein, Guido
  • El Bakkali, Bouchra
  • Reinoso, Santiago
In this study, we describe a very simple approach to the development of tailored mesoporosity in any nanostructured heteropolysalt with control over both the mesoporous volume and the pore size. This approach, which consists in the treatment of a solid microporous precursor with a basic agent, has been tested on the ammonium salt of the Keggin‐type [PMo12O40]3− heteropolyanion and constitutes a novel procedure for the preparation of mesoporous solids with no precedents. The results obtained in this study allow two main conclusions to be drawn: 1) the micro‐ and mesoporous structures in the heteropolysalt nanoparticles are independent from each other and 2) the development of mesoporosity in the solid material must be related to a process of alkaline degradation within the core of the nanocrystals that aggregate into the particles. These results afford valuable additional information to the present model of porosity that has been established for heteropolysalts., This work was financially supported by Generalitat Valenciana (grant PROMETEO2/2014/010) and Ministerio de Economía y Competitividad (grant CTQ2015‐64801‐R) through FEDER funds. S.R. acknowledges financial support from the program 'Ayudas para la Captación del Talento adscritas a los Institutos de Investigación de la Universidad Pública de Navarra' funded by a collaboration agreement between Universidad Pública de Navarra, Fundación Bancaria La Caixa and Fundación Bancaria Caja Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Zirconia-supported tungstophosphoric heteropolyacid as heterogeneous acid catalyst for biodiesel production

  • Alcañiz Monge, Juan
  • El Bakkali, Bouchra
  • Trautwein, Guido
  • Reinoso, Santiago
A series of materials based on the immobilization of the 12-tungstophosphoric heteropolyacid over zirconia supports have been prepared and applied as heterogeneous acid catalysts in the esterification of palmitic acid with methanol as a model reaction for the preliminary stage of the biodiesel production. The title materials have been obtained through the sol-gel method combined with a subsequent hydrothermal treatment at mild conditions, which affords catalysts with larger porosity and higher thermal and chemical stability under the esterification reaction conditions than other preparative approaches. Generating the zirconia support by hydrolysis of an alkoxyde precursor in the presence of the heteropolyacid leads to materials with homogeneously well-dispersed clusters, as well as to an increasing contribution of the tetragonal ZrO2 crystalline phase, a decreasing size of the nanoparticles and larger microporous volumes as the loading of the Keggin-type species increases. The 12-tungstophosphoric acid retains its catalytic activity in the esterification of palmitic acid with methanol at 60 °C upon immobilization over zirconia and conversions even higher than those observed under homogeneous conditions are obtained due to the active contribution of the support. The sample with a 30% mass percentage of heteropolyacid has been identified as the most efficient catalyst because it affords conversions above the 90% and shows the lower loss of activity over successive reaction runs among all of our materials. This loss of activity has been analyzed on the basis of the leaching of the catalyst and the fouling of the materials., This work was financially supported by Generalitat Valenciana through FEDER funds (grant PROMETEO2/2014/010) and by the Spanish Ministerio de Economía y Competitividad (grant CTQ2015-64801-R). S.R. acknowledges financial support from InaMat and from the program 'Ayudas para la Captación del Talento adscritas a los Institutos de Investigación de la UPNA' funded by a collaboration agreement with Obra Social la Caixa and Fundación Caja Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Zirconia-supported 11-molybdovanadophosphoric acid catalysts: effect of the preparation method on their catalytic activity and selectivity

  • El Bakkali, Bouchra
  • Trautwein, Guido
  • Alcañiz Monge, Juan
  • Reinoso, Santiago
The oxidation of adamantane with hydrogen peroxide catalyzed by zirconia-supported 11-molybdovanadophosphoric acid is shown to be a suitable green route for the synthesis of adamantanol and adamantanone. This work evaluates how the catalyst activity and selectivity are affected by some of its preparative parameters, such as the method for supporting the catalytically active heteropoly acid over the zirconia matrix or the pretreatments applied to the resulting materials before being used as heterogeneous catalysts. Our results indicate that the most effective catalysts able to maintain their activity after several reaction runs are those prepared by following the sol-gel route, whereas the most selective catalysts are those obtained by impregnation methods. Moreover, the calcination temperature has also been identified as a relevant parameter influencing the performance of catalysts based on supported heteropoly acids. The increasing catalytic activity observed over several consecutive reaction runs has been attributed to the formation of peroxo derivatives of polyoxometalate clusters at the surface of the catalyst and their accumulation after each reaction cycle., Funding for this research was provided by: Generalitat Valenciana (grant No. PROMETE/2018/076); Ministerio de Economía, Industria y Competitividad (grant No. CTQ2015– 64801-R); Obra Social la Caixa, Fundación Caja Navarra and Universidad Pública de Navarra (contract to SR in the framework of the program ‘Captación de Talento’).