Pasar al contenido principal

REPRODUCCION DIGITAL AVANZADA DE LA GONIOAPARIENCIA VISUAL DE OBJETOS

DPI2015-65814-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSIDAD DE ALICANTE
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Finding the Additives Incorporation Moment in Hybrid Natural Pigments Synthesis to Improve Bioresin Properties

  • Micó-Vicent, B.|||0000-0001-8845-1495
  • Jordán-Núñez, Jorge|||0000-0001-8178-9987
  • Cases, Francisco|||0000-0001-8105-4489
  • Perales Romero, Esther
  • Martínez-Verdú, Francisco Miguel
[EN] Interest in applications of natural dye applications has increased because of their antibacterial properties and the possibility of extracting them from nature and residues. Using nanoclays as hosts to reinforce natural dye properties has been successfully demonstrated. However, no one has attempted to optimize the polymer matrix and hybrid pigment properties at the same time to ensure the best final properties for bio-composite applications. Using a statistical design for experiments, we propose the best combination of modifiers with the best nanoclay as the host of three natural dyes: chlorophyll, ß-carotene, and betanine. Using the L9 Taguchi designs, we learned both the influence of the nanoclay structure, and the addition moment of surfactant, mordant salt, and silane modifiers. FTIR, XRD, DTG, integration sphere spectrophotometer, and UV-aging tests were used to characterize the hybrid pigments and epoxy bioresin composites. The degradation temperatures of the three natural dyes rose and the reinforcement of the stability of three natural dyes to UV¿Vis radiation exposure was demonstrated, which avoided the migration of these dyes from bioresin to wet ribbing. Optimal results were obtained with hydrotalcite clay (calcined or not) by using surfactant and mordant before the natural dye, and before or after silane. View Full-Text, This research was funded by Spanish Agencia Estatal de Investigacion (AEI) and the European Union (FEDER funds) (contract MAT2016-77742-C2-1-P) and Spanish Ministry of Economy and Competitiveness (project DPI2015-65814-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Review of instrumental inter-agreement study of spectral and colorimetric data of commercial multi-angle spectrophotometers

  • Perales Romero, Esther
  • Huraibat, Khalil
  • Martínez-Verdú, Francisco Miguel
  • Dietz, Christian
  • Yamanoi, Yuta
  • Micó-Vicent, B.|||0000-0001-8845-1495
[EN] Several different instruments have been introduced into the market to obtain good color characterization for different measurement configurations. These commercial instruments have different optical and working configurations, however, the measurement data provided by each instrument should be similar to have good consistency when comparing them to each other measuring the same sample material. Therefore, the purpose of this work was to apply an inter-model agreement study of spectral and colorimetric data of three instruments (CM-M6, BYK-mac-I, and MA98). Two different statistical tests were applied following ASTM recommendations. In general, the measurement geometries close to the specular direction and the flop direction showed greater deviations. In addition, the partial color differences calculated for the comparison of MA98 versus CM-M6 were larger than the BYK-mac-i versus CM-M6 comparison. Finally, it can be concluded that most of the measurement geometries were statistically significantly different from each other which means that these differences were due to systematic or bias errors and not exclusively to random errors., EMRP, Grant/Award Numbers: Bidirectional reflectance definitions (16NRM08), 16NRM08; Spanish Ministry of Economy and Competitiveness, Grant/Award Number: DPI2015-65814-R; Ministry of Economy and Competitiveness, Grant/Award Number: DPI2015-65814-R; European Union; EURAMET
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Maximization of FDM-3D-Objects Gonio-Appearance Effects Using PLA and ABS Filaments and Combining Several Printing Parameters: &quot, A Case Study&quot

  • Micó-Vicent, B.|||0000-0001-8845-1495
  • Perales Romero,Esther
  • Huraibat, Khalil
  • Martínez-Verdú, F.
  • Viqueira, Valentín
[EN] In order to consider 3D objects from suitable Fused Deposition Modelling (FDM) printers as prototypes for the automotive sector, this sample must be able to reproduce textural effects (sparkle or graininess) or metallic or gonio-appearance to reinforce the attractive appeal of these materials. This study worked with two different commercial filaments: grey metallic PLA (poly(lactic acid)) and ABS (acrylonitrile-butadiene-styrene copolymer) with diffractive pigments. For both materials, a statistical design of experiments (DoE) was carried out to find the printing parameters effect on the final 3D-objects gonio-appearance. The selected printing parameters were printing speed (2 levels), layer height (2 levels) and sample thickness (3 levels). Twelve smooth square objects were printed from each material. The ABS-diffractive filaments achieved the most significant flop and higher sparkle values than metallic PLA. Graininess was high when working with PLA filaments instead of ABS. Layer height was the most significant parameter to maximize PLA objects' flop or sparkle effects. The best result was found when printing at 0.1 mm. For the ABS samples, the stronger flop and sparkle effects were achieved with the 50 mm/s printing speed, the 0.1 mm layer height and the lowest thickness level. This study shows the methodology to study the printing parameters effects and interactions to maximize the FDM-3D-objects gonio-appearance., This research was funded by the Spanish Agencia Estatal de Investigacion (AEI), the European Union (FEDER funds) (Contract MAT2016-77742-C2-1-P) and the Spanish Ministry of Economy and Competitiveness (project DPI2015-65814-R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Definition of a measurement scale of graininess from reflectance and visual measurements

  • Ferrero, Alejandro
  • Velázquez, J.L.
  • Perales, E.
  • Campos Acosta, Joaquín
  • Martínez Verdú, Francisco M.
12 pags., 7 figs., Effect pigments in coatings produce eye-catching colour and texture effects and are widely used in automotive, cosmetics, coatings, inks, flooring, textile or decoration. One of these texture effects is graininess, which is the perceived texture exhibited when the effect coating is observed under diffuse illumination. To date there is not a standard procedure to measure graininess from reflectance measurements. The objective of this work is to propose a methodology for traceable graininess measurements, similarly as it was proposed for colour in 1931. In this article, the relevant reflectance-based quantities are clearly defined, and a formal relation with data from visual experiments is given. This methodology would allow a measurement scale of graininess and a difference formula to be agreed once conclusive visual data become available., The EMPIR is jointly funded by the EMPIR participating countries within EURAMET and the European Union. Part of the authors (Instituto de Óptica “Daza de Valdés” (IO, CSIC), Agencia Estatal CSIC) are also grateful to Comunidad de Madrid for funding the project SINFOTON-CM: S2013/MIT-2790. Part of the authors (Color & Vision Group, University of Alicante) are also grateful to Spanish Ministry of Economy and Competitiveness for funding the project ADIREVGAO: DPI2015-65814-R., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Real-time accurate rendering of color and texture of car coatings

  • Kirchner, Eric
  • Van der Lans, I.
  • Koechhoven, Pim
  • Huraibat, Khalil
  • Martínez-Verdú, F.M.
  • Perales, Esther
  • Ferrero, Alejandro
  • Campos Acosta, Joaquín
6 pags., 3 figs. -- IS&T International Symposium on Electronic Imaging 2019 Color Imaging XXIV: Displaying, Processing, Hardcopy, and Applications, The digital representation of three dimensional objects with different materials has become common not only in the games and movie industry, but also in designer software, e-commerce and other applications. Although the rendered images often seem to be realistic, a closer look reveals that their color accuracy is often insufficient for critical applications. Storage of the angledependent color properties of metallic coatings and other gonioapparent materials demands large amounts of data. Apart from that, also rendering sparkle, gloss and other visual texture phenomena is still a subject of active research. Current approaches are computationally very demanding, and require manual ad-hoc setting of many model parameters. In this paper, we describe a new approach to solve these problems. We combine a multi-spectral physics-based approach to make BRDF representation more efficient. We also account for the common loss in color accuracy due to the varying technical specifications of displays, and we correct for the influence from ambient lighting. The rendering framework presented here is shown to be capable of rendering sparkle and gloss as well, based on objective measurement of these properties. This takes out the subjective phase of manual fine-tuning of model parameters that is characteristic for many current rendering approaches. A feasibility test with the new spectral rendering pipeline shows that is indeed able to produce realistic rendering of color, sparkle, gloss and other texture aspects. The computation time is small enough to make the rendering real-time on an iPad 2017, i.e. with low memory footprint and without high demands on graphic card or data storage., This study was also supported by the Spanish Ministry of Economy and Competitiveness under grant no. DPI2011-30090-C02-02 and the European Union. Khalil Huraibat would also like to thank the Ministry of Economy and Competitiveness for his pre-doctoral fellowship grant (FPI BES- 2016- 077325). The authors are also grateful to EMRP for funding the project “Bidirectional Reflectance Definitions”. The EMRP is jointly funded by the EMRP participating countries within EURAMET and the European Union