Pasar al contenido principal

EXOESQUELETO LIGERO PARA LA GENERACION DE FUERZAS EN LAS EXTREMIDADES SUPERIORES APLICADA A TAREAS DE REHABILITACION.

DPI2015-68842-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSIDAD POLITECNICA DE MADRID
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Efficient Multiaxial Shoulder-Motion Tracking Based on Flexible Resistive Sensors Applied to Exosuits

  • Samper-Escudero, J. Luis
  • Contreras-González, Aldo F.
  • Ferre, Manuel
  • Sánchez-Urán, Miguel A.
  • Pont-Esteban, David
This article describes the performance of a flexible resistive sensor network to track shoulder motion. This system monitors every gesture of the human shoulder in its range of motion except rotations around the longitudinal axis of the arm. In this regard, the design considers the movement of the glenohumeral, acromioclavicular, sternoclavicular, and scapulothoracic joints. The solution presented in this work considers several sensor configurations and compares its performance with a set of inertial measurement units (IMUs). These devices have been put together in a shoulder suit with Optitrack visual markers in order to be used as pose ground truth. Optimal configurations of flexible resistive sensors, in terms of accuracy requirements and number of sensors, have been obtained by applying principal component analysis techniques. The data provided by each configuration are then mapped onto the shoulder pose by using neural network algorithms. According to the results shown in this article, a set of flexible resistive sensors can be an adequate alternative to IMUs for multiaxial shoulder pose tracking in open spaces. Furthermore, the system presented can be easily embedded in fabric or wearable devices without obstructing the user’s motion., This work has been partially supported by the project ‘‘ExoFlex: Exoesqueleto ligero para la generación de fuerzas en las extremidades superiores aplicado a tareas de rehabilitación,’’ under DPI-2015-68842-R grant, funded by the Spanish 'Ministerio de Economía, Industria y Competitividad’, and ‘‘LUXBIT: Lightweight Upper limbs eXosuit for BImanual Task Enhancement/Exoesqueleto ligero del tren superior para ayuda a tareas bimanuales’’ under RTI2018- 094346-B-I00 grant, funded by the Spanish ‘Ministerio de Ciencia, Innovación y Universidades’., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Cable-Driven Exosuit for Upper Limb Flexion Based on Fibres Compliance

  • Samper-Escudero, José Luis
  • Giménez-Fernández, Antonio
  • Sánchez-Urán, Miguel Ángel
  • Ferre, Manuel
Flexible soft exoskeletons, so-called exosuits, are robotic devices that interact with their users to assist or enhance muscle performance. Their lightweight design and lack of rigid parts allow assisting the user's natural motion without any constraints. They are thereby valuable in carrying out daily labour tasks and performing active stances of rehabilitation. Nonetheless, the usage of these devices in long-term applications demands anatomically adaptive designs and mechanisms to tackle textile artefacts and discrepancies in the human constitution. The soft exoskeleton described in this article is a textile-wearable design that assists shoulder and elbow flexion. The cable-driven actuation is embedded in a jacket by using several textiles and deformable parts. The inconveniences of using textile such as slipping, dampening, and pressure sores are tackled by combining textile layers with force-compliant sewing. The design also includes pieces for cable guidance, anchoring and support. These parts employ different tailoring methods so as to ease fabrication, wearing and cleaning. The motors and electronics, whose design is compatible with textiles too, are placed in a backpack. This configuration reduces forces from loads in motion and weight on the arm. Finally, the last part of the document discusses the preliminary results that have been obtained from four subjects who have worn the device., This work was supported in part by the ‘‘Exoesqueleto Ligero para la Generación de Fuerzas en las Extremidades Superiores Aplicado a Tareas de Rehabilitación (ExoFlex)’’ Project funded by the Spanish Ministerio de Economía, Industria y Competitividad under Grant DPI-2015-68842-R, and in part by the ‘‘Lightweight Upper Limbs eXosuit for BImanual Task Enhancement/Exoesqueleto Ligero del Tren Superior para Ayuda a Tareas Bimanuales (LUXBIT)’’ funded by the Spanish Ministerio de Ciencia, Innovación y Universidades under Grant RTI2018-094346-BI00., Peer reviewed