Pasar al contenido principal

PRODUCTOS Y SERVICIOS INNOVADORES CON SENSORES DE MICROONDAS, SMOS Y SENTINELS PARA TIERRA

ESP2015-67549-C3-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Wide Field of View Microwave Interferometric Radiometer Imaging

  • Corbella, Ignasi
  • Torres, Francesc
  • Duffo, Nuria
  • Durán, Israel
  • González Gambau, Verónica
  • Martín-Neira, Manuel
Special Issue Ten Years of Remote Sensing at Barcelona Expert Center.-- 17 pages, 9 figures, In microwave interferometric radiometers with a large field of view, as for example the Microwave Imaging Radiometer with Aperture Synthesis (MIRAS) onboard the Soil Moisture and Ocean Salinity (SMOS) satellite, one of the major causes of reconstruction error is the contribution to the visibility of the brightness temperature outside the fundamental period, defined on the basis of reciprocal grids. A mitigation method consisting of estimating this contribution through the application of a brightness temperature model outside the fundamental period is proposed. The main advantage is that it does not require any a posteriori addition of artificial scenes to the reconstructed image. Additionally, a method to avoid the sophisticated matrix regularization and inversion techniques usually applied in microwave interferometry is presented. Image reconstruction algorithms are implemented on a minimum grid size in order to maximize their numerical efficiency. An improved method to apply an apodization window to the reconstructed image for reducing Gibbs oscillations is also proposed. All procedures are generally described considering the single polarization case and successively implemented applying the MIRAS layout in both its single polarization and full polarimetric modes. Results show similar performance of the proposed algorithm with respect to the nominal one applied by SMOS. All algorithms are implemented in the MIRAS Testing Software and have been successfully used for scientific studies by other teams, We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), This research was funded by the European Space Agency through SMOS P7 subcontract DME CP12 no. 2015-005 with Deimos Enginheria (Portugal) and by Ministerio de Economia, Industria y Competitividad, Gobierno de España, projects TEC2014-58582-R, TEC2017-88850-R and ESP2015-67549-C3-1-R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Real-time Reconstruction of Surface Velocities from Satellite Observations in the Alboran Sea

  • Isern-Fontanet, Jordi
  • García-Ladona, Emilio
  • Jiménez Madrid, J. A.
  • Olmedo, Estrella
  • García-Sotillo, Marcos
  • Orfila, Alejandro
  • Turiel, Antonio
Special issue Ten Years of Remote Sensing at Barcelona Expert Center.-- 18 pages, 11 figures, 1 table, 1 appendix .-- Altimetric data was produced by the GlobCurrent Data User Element project and is available through its web site: http://www.globcurrent.org. Infrared images are available through the Insitut de Ciències del Mar (CSIC) at https://coo.icm.csic.es/site-page/satellite-data as well as Sea Surface Salinity Maps, Surface currents in the Alboran Sea are characterized by a very fast evolution that is not well captured by altimetric maps due to sampling limitations. On the contrary, satellite infrared measurements provide high resolution synoptic images of the ocean at high temporal rate, allowing to capture the evolution of the flow. The capability of Surface Quasi-Geostrophic (SQG) dynamics to retrieve surface currents from thermal images was evaluated by comparing resulting velocities with in situ observations provided by surface drifters. A difficulty encountered comes from the lack of information about ocean salinity. We propose to exploit the strong relationship between salinity and temperature to identify water masses with distinctive salinity in satellite images and use this information to correct buoyancy. Once corrected, our results show that the SQG approach can retrieve ocean currents slightly better to that of near-real-time currents derived from altimetry in general, but much better in areas badly sampled by altimeters such as the area to the east of the Strait of Gibraltar. Although this area is far from the geostrophic equilibrium, the results show that the good sampling of infrared radiometers allows at least retrieving the direction of ocean currents in this area. The proposed approach can be used in other areas of the ocean for which water masses with distinctive salinity can be identified from satellite observations, This research was funded by European Space Agency grant number 4000109513/13/I-LG and by Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund grants numbers ESP2015-67549-C3-1-R and CTM2016-79474-R. JIF was funded by Fundación General CSIC through Programa ComFuturo, With the funding support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), of the Spanish Research Agency (AEI)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Deriving VTEC Maps from SMOS Radiometric Data

  • Rubino, Roselena
  • Duffo, Nuria
  • González Gambau, Verónica
  • Corbella, Ignasi
  • Torres, Francesc
  • Durán, Israel
  • Martín-Neira, Manuel
Special Issue Ten Years of Remote Sensing at Barcelona Expert Center.-- 18 pages,14 figures, 2 tables, In this work, a new methodology is proposed in order to derive vertical total electron content (VTEC) maps from the radiometric measurements of the Soil Moisture and Ocean Salinity (SMOS) mission as an alternative approach to those based on external databases and models. This approach uses spatiotemporal filtering techniques with optimized filters to be robust against the thermal noise and image reconstruction artifacts present in SMOS images. It is also possible to retrieve the Faraday rotation angle from the recovered VTEC maps in order to correct the effect that it causes in the SMOS brightness temperatures, This research was supported by the European Space Agency and Deimos Engenharia (Portugal), SMOS P7 Subcontract DME CP12 no. 2015-005; ERDF (European Regional Development Fund); by the Spanish public funds, projects TEC2017-88850-R and ESP2015-67549-C3-1-R; and through the award “Unidad de Excelencia María de Maeztu” MDM-2016-0600, financed by the “Agencia Estatal de Investigación” (Spain) and by the European Regional Development Fund (ERDF), With the funding support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), of the Spanish Research Agency (AEI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the Seasonal Cycle of the Statistical Properties of Sea Surface Temperature

  • Isern-Fontanet, Jordi
  • Capet, Xavier
  • Turiel, Antonio
  • Olmedo, Estrella
  • González-Haro, Cristina
8 pages, 3 figures.-- Data Availability Statement: The details of the model configuration, as well as, the simulated Sea Surface Temperatures generated for this study, and the singularity analysis described in Section 3 are available in https://doi.org/10.20350/digitalCSIC/14487 (Isern-Fontanet et al., 2022), The contribution of ocean fronts to the properties and temporal evolution of Sea Surface Temperature (SST) structure functions have been investigated using a numerical model of the California Current system. First, the intensity of fronts have been quantified by using singularity exponents. Then, leaning on the multifractal theory of turbulence, we show that the departure of the scaling of the structure functions from a straight line, known as anomalous scaling, depends on the intensity of the strongest fronts. These fronts, at their turn, are closely related to the seasonal change of intensity of the coastal upwelling characteristics of this area. Our study points to the need to correctly reproduce the intensity of the strongest fronts and, consequently, properly model processes such as coastal upwelling in order to reproduce SST statistics in ocean models, This work was supported by the Ministry of Economy and Competitiveness, Spain, and FEDER EU through the EXPLORA Ciencia National R + D Plan under TURBOMIX project (CGL2015-73100-EXP) and through the projects PROMISES (ESP2015-67549-C3-1-R) and COSMO (CTM2016-79474-R). This work was supported in part by the Spanish R&D project L-BAND (ESP2017-89463-C3-1-R), which is funded by MCIN/AEI/10.13039/501100011033 and ERDF. A way of making Europe, and project INTERACT (PID2020-114623RB-C31), which is funded by MCIN/AEI/10.13039/501100011033. We also acknowledge support from Fundación General CSIC (Programa ComFuturo). This work acknowledges the “Severo Ochoa Centre of Excellence” accreditation (CEX2019-000928-S). This work is a contribution to CSIC PTI Teledetect, Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Wide field of view microwave interferometric radiometer imaging

  • Corbella Sanahuja, Ignasi|||0000-0001-5598-7955
  • Torres Torres, Francisco|||0000-0003-1160-6350
  • Duffo Ubeda, Núria|||0000-0002-9398-3995
  • Durán Martínez, Israel
  • González Gambau, Verónica
  • Martín Neira, Manuel
In microwave interferometric radiometers with a large field of view, as for example the Microwave Imaging Radiometer with Aperture Synthesis (MIRAS) onboard the Soil Moisture and Ocean Salinity (SMOS) satellite, one of the major causes of reconstruction error is the contribution to the visibility of the brightness temperature outside the fundamental period, defined on the basis of reciprocal grids. A mitigation method consisting of estimating this contribution through the application of a brightness temperature model outside the fundamental period is proposed. The main advantage is that it does not require any a posteriori addition of artificial scenes to the reconstructed image. Additionally, a method to avoid the sophisticated matrix regularization and inversion techniques usually applied in microwave interferometry is presented. Image reconstruction algorithms are implemented on a minimum grid size in order to maximize their numerical efficiency. An improved method to apply an apodization window to the reconstructed image for reducing Gibbs oscillations is also proposed. All procedures are generally described considering the single polarization case and successively implemented applying the MIRAS layout in both its single polarization and full polarimetric modes. Results show similar performance of the proposed algorithm with respect to the nominal one applied by SMOS. All algorithms are implemented in the MIRAS Testing Software and have been successfully used for scientific studies by other teams., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Validation of SMOS L3 and L4 soil moisture products in the REMEDHUS (Spain) and CEMADEN (brazil) networks, Validação de produtos de umidade do solo, SMOS L3 e L4, nas redes REMEDHUS (Espanha) e CEMADEN (Brasil)

  • Rossato, Luciana
  • Vall-Llossera Ferran, Mercedes Magdalena|||0000-0003-1357-7098
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
  • Chaparro Danon, David|||0000-0002-5545-6182
  • Alvalá, Regina Célia dos Santos
  • Barbosa Alves, Humberto
This work analyzes the quality of the soil moisture L3 (25 km) and L4 (1 km) products generated at the Barcelona Expert Center (BEC) in two sites located in distinct semi-arid regions, where measurement networks are installed: “Red de Estaciones de Medición de la Humedad del Suelo” (REMEDHUS), which is located in the central part of the Duero basin (Spain), and National Center for Monitoring and Early Warning of Natural Disasters (CEMADEN), at Northeast of the Brazil. REMEDHUS has been used as a calibration/validation site for SMOS and SMAP missions. It is a dense network covering 35 x 35 km2 and it has 22 stations. The CEMADEN network provides a database for the development of early warnings for natural disasters that occurs in Brazil, such as droughts and floods. It is a sparse network covering 1000 x 1000 km2 with more than 500 station. Results show good correspondence between SMOS L4 data and the in situ soil moisture data for REMEDHUS and CEMADEN networks. Correlations mean range from 0.3 to 0.8, and depend mainly on the station situation, soil type, and land cover on both Spain and Brazil networks. For the average data of both series, the correlation coefficient is higher than 0.6. Results show that the L4 product are better correlated than the L3 product, although L4 and L3 products are quite similar. This indicates that both products are ready for its operational use, with L4 providing a better representation of the soil moisture status at finer scales., Este trabalho analisa a qualidade dos produtos L3 (25 km) e L4 (1 km) de umidade do solo gerados no Barcelona Expert Center (BEC) em dois locais localizados em regiões semi-áridas distintas, onde estão instaladas redes de medição: Estações de Medição de Umidade do Solo” (REMEDHUS), localizado na parte central da bacia do Douro (Espanha), e Centro Nacional de Monitoramento e Aviso Prévio de Desastres Naturais (CEMADEN), no nordeste do Brasil. O REMEDHUS foi usado como um local de calibração / validação para missões SMOS e SMAP. É uma rede densa cobrindo 35 x 35 km2 e possui 22 estações. A rede CEMADEN fornece um banco de dados para o desenvolvimento de alertas precoces de desastres naturais que ocorrem no Brasil, como secas e inundações. É uma rede esparsa cobrindo 1000 x 1000 km2 com mais de 500 estações. Os resultados mostram boa correspondência entre os dados SMOS L4 e os dados de umidade do solo in situ para as redes REMEDHUS e CEMADEN. As correlações variam de 0,3 a 0,8 e dependem principalmente da situação da estação, tipo de solo e cobertura do solo nas redes da Espanha e do Brasil. Para os dados médios de ambas as séries, o coeficiente de correlação é superior a 0,6. Os resultados mostram que o produto L4 está melhor correlacionado que o produto L3, embora os produtos L4 e L3 sejam bastante semelhantes. Isso indica que ambos os produtos estão prontos para seu uso operacional, com L4 fornecendo uma melhor representação do status de umidade do solo em escalas mais refinadas, This work was supported by the Spanish Ministry of Economy and Competitiveness, through the project PROMISES: Productos y servicios innovadores con sensores de microondas, SMOS y Sentinels para tierra ESP2015-67549-C3- 1-R and the ERDF (European Regional Development Fund). And though the award “Unidad de Excellencia María de Maetzu MDM2016-0600, financed by the Agencia Estatal de Investigación (Spain)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Correcting the FRA systematic error in VTEC maps from SMOS radiometric data

  • Rubino, Roselena
  • Duffo Ubeda, Núria|||0000-0002-9398-3995
  • González Gambau, Verónica
  • Corbella Sanahuja, Ignasi|||0000-0001-5598-7955
  • Torres Torres, Francisco|||0000-0003-1160-6350
  • Oliva Balagué, Roger
  • Martín Neira, Manuel
The Faraday rotation (FR) is a nonnegligible effect at the L-band, which is the operation frequency of the Soil Moisture and Ocean Salinity (SMOS) mission. This effect introduces a rotation in the electromagnetic field polarization when propagating through the ionosphere that must be compensated. Recently, a methodology was developed in order to retrieve the vertical total electron content (VTEC) from SMOS radiometric data with the aim to better correct the FR effect [1] . In that work, systematic patterns in the retrieved FR angle (FRA) were detected. In this article, these systematic patterns are characterized and corrected to improve the quality of the retrieved VTEC maps. These maps can be then reused in the SMOS level 2 processor for the correction of the FRA in the mission. The impact of using the SMOS-derived VTEC maps instead of the VTEC data from global positioning system (GPS) measurements on the ocean brightness temperatures (TB) measurement has also been analyzed. Results of this analysis show that the usage of those maps allows a significant enhancement in the quality of the TB, which will lead to an improvement on salinity retrievals., This work was supported in part by the European Space Agency, Soil Moisture and Ocean Salinity (SMOS) Expert Support Laboratories (ESL) for SMOS Level 1 and Level 2 over Land, Ocean and Ice Project under Grant RFQ/3-16138/19/I-BG; in part by the SMOS P7 under Contract DME CP12 no. 2015-005 (in joint with Deimos Engenharia, Portugal); in part by the Spanish Public Funds under Project TEC2017-88850-R and Project ESP2015-67549-C3-1-R through the Award “Unidad de Excelencia María de Maeztu” MDM-2016-0600, financed by the “Agencia Estatal de Investigación” (Spain); in part by the European Regional Development (ERDF); in part by the SMOS ESL for SMOS Level 1 and Level 2 over Land, Ocean and Ice Project under Grant ARG/003-032/0315/ICMCSIC; in part by the Spanish Research and Development Project INTERACT under Grant PID2020-114623RB-C31; and in part by the Spanish Government through the “Severo Ochoa Centre of Excellence” accreditation under Grant CEX2019-000928-S., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A spatially consistent downscaling approach for SMOS using an adaptive moving window

  • Portal González, Gerard|||0000-0003-0797-6711
  • Vall-Llossera Ferran, Mercedes Magdalena|||0000-0003-1357-7098
  • Piles de la Fuente, María Pilar
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
  • Chaparro Danon, David|||0000-0002-5545-6182
  • Pablos Hernández, Miriam|||0000-0003-2694-7107
  • Rossato, Luciana
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The European Space Agency (ESA)'s Soil Moisture and Ocean Salinity (SMOS) is the first spaceborne mission using L-band radiometry to monitor the Earth's global surface soil moisture (SM). After more than 7 years in orbit, many studies have contributed to improve the quality and applicability of SMOS-derived SM maps. In this research, a novel downscaling algorithm for SMOS is proposed to obtain high-resolution (HR) SM maps at 1 km (L4), from the ~40 km native resolution of the instrument. This algorithm introduces the concept of a shape adaptive moving window as an improvement of the current semi-empirical downscaling approach at SMOS Barcelona Expert Center, based on the “universal triangle”. Its inputs are as follows: the SMOS SM (L3 at ~40 km spatial resolution), the vertical and the horizontal SMOS brightness temperatures (L1C at ~40 km), and the HR normalized difference vegetation index and land surface temperature from optical-based sensors. The proposed method has the following advantages: HR SM maps are obtained while maintaining the dynamic range from the original L3 product; energy is conserved, because differences between aggregated L4 and L3 SM maps are negligible; and it can be applied to continental areas, even when they integrate different climates. A comparison of SMOS L3 and L4 products with in situ data for networks allocated in Spain and Australia shows good agreement in terms of correlation and root mean square error. The proposed method is shown to capture 1-km SM spatial variability while preserving the quality of SMOS at its native resolution., This work was supported in part by the Span- ish Ministry of Economy and Competitiveness, through Project PROMISES: Productos y servicios innovadores con sensores de microondas, SMOS y Sen- tinels para tierra ESP2015-67549-C3-1-R, in part by the European Regional Development Fund, in part by the Castilla y Le´on Region Government under Project SA007U16, and in part by the “Unidad de Excelencia Maria de Maeztu MDM-2016-0600,” financed by the “Agencia estatal de Investigac Spain.” M. Piles is supported by a Ram´on y Cajal contract (MINECO)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Sensitivity of L-band vegetation optical depth to carbon stocks in tropical forests: a comparison to higher frequencies and optical indices

  • Chaparro Danon, David|||0000-0002-5545-6182
  • Duveiller, Grégory
  • Piles de la Fuente, María Pilar
  • Cescatti, Alessandro
  • Vall-Llossera Ferran, Mercedes Magdalena|||0000-0003-1357-7098
  • Camps Carmona, Adriano José|||0000-0002-9514-4992
  • Entekhabi, Dara
Supplementary data to this article can be found online at https://doi.org/10.1016/j.rse.2019.111303., Monitoring vegetation carbon in tropical regions is essential to the global carbon assessment and to evaluate the actions oriented to the reduction of forest degradation. Mainly, satellite optical vegetation indices and LiDAR data have been used to this purpose. These two techniques are limited by cloud cover and are sensitive only to the top of vegetation. In addition, the vegetation attenuation to the soil microwave emission, represented by the vegetation optical depth (VOD), has been applied for biomass estimation using frequencies ranging from 4 to 30¿GHz (C- to K-bands). Atmosphere is transparent to microwaves and their sensitivity to canopy layers depends on the frequency, with lower frequencies having greater penetration depths. In this regard, L-band VOD (1.4¿GHz) is expected to enhance the ability to estimate carbon stocks. This study compares the sensitivity of different VOD products (from L, C, and X-bands) and an optical vegetation index (EVI) to the above-ground carbon density (ACD). It quantifies the contribution of ACD and forest cover proportion to the VOD/EVI signals. The study is conducted in Peru, southern Colombia and Panama, where ACD maps have been derived from airborne LiDAR. Results confirm the enhanced sensitivity of L-band VOD to ACD when compared to higher frequency bands, and show that the sensitivity of all VOD bands decreases in the densest forests. ACD explains 34% and forest cover 30% of L-band VOD variance, and these proportions gradually decrease for EVI, C-, and X-band VOD, respectively. Results are consistent through different categories of altitude and carbon density. This pattern is found in most of the studied regions and in flooded forests. Results also show that C-, X-band VOD and EVI provide complementary information to L-band VOD, especially in flooded forests and in mountains, indicating that synergistic approaches could lead to improved retrievals in these regions. Although the assessment of vegetation carbon in the densest forests requires further research, results from this study support the use of new L-band VOD estimates for mapping the carbon of tropical forests., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

One-point microwave radiometer calibration

  • Corbella Sanahuja, Ignasi|||0000-0001-5598-7955
  • Torres Torres, Francisco|||0000-0003-1160-6350
  • Closa Soteras, Josep
  • Duffo Ubeda, Núria|||0000-0002-9398-3995
  • Durán Martínez, Israel
  • González Gambau, Verónica
  • Martín Neira, Manuel
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., A method for internally calibrating microwave total power radiometers by using only one level of noise injection is presented. It is based on having a previous accurate characterization of the receiver noise temperature, which used de facto as a second calibration standard. The method proves to be at least equivalent to the classical two level, as demonstrated through their intercomparison using the data provided by the Microwave Imaging Radiometer using Aperture Synthesis (MIRAS) on board the European Space Agency Soil Moisture and Ocean Salinity (SMOS) Satellite. The long-term stability in terms of retrieved brightness temperature using both methods has similar trends with a small advantage for the one-point approach proposed here., This work was supported in part by the Euro-pean Space Agency with Deimos Enginheria (Portugal) under SMOSP7 Subcontract DME CP12 2015-005 and in part by the Ministerio deEconomía, Industria y Competitividad,Gobierno de España under ProjectTEC2014-58582-R, Project TEC2017-88850-R, and Project ESP2015-67549-C3-1-R., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Calibration of the MIRAS Radiometers

  • Corbella Sanahuja, Ignasi|||0000-0001-5598-7955
  • Torres Torres, Francisco|||0000-0003-1160-6350
  • Duffo Ubeda, Núria|||0000-0002-9398-3995
  • Durán Martínez, Israel
  • González Gambau, Verónica
  • Oliva Balagué, Roger
  • Closa, Josep
  • Martín Neira, Manuel
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The microwave imaging radiometer with aperture synthesis (MIRAS) is formed by 69 total power radiometers, of which three are the noise-injection type. Their calibration is reviewed on the basis of the data gathered during more than eight years of operation. Internally calibrated gain and offset corrections with improved temporal stability are presented. New front-end loss characterization with lower seasonal dependence originated from external temperature swings is also proposed. Finally, a methodology to validate the external calibrations, with the instrument pointing to the cold sky, is developed. It seems to indicate that the change of orientation of the instrument, with associated thermal variations, may induce small changes in the radiometer front-end losses, thus introducing calibration errors., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Wide field of view microwave interferometric radiometer imaging

  • Corbella Sanahuja, Ignasi
  • Torres Torres, Francisco
  • Duffo Ubeda, Núria
  • Durán Martínez, Israel
  • González Gambau, Verónica
  • Martín Neira, Manuel
In microwave interferometric radiometers with a large field of view, as for example the Microwave Imaging Radiometer with Aperture Synthesis (MIRAS) onboard the Soil Moisture and Ocean Salinity (SMOS) satellite, one of the major causes of reconstruction error is the contribution to the visibility of the brightness temperature outside the fundamental period, defined on the basis of reciprocal grids. A mitigation method consisting of estimating this contribution through the application of a brightness temperature model outside the fundamental period is proposed. The main advantage is that it does not require any a posteriori addition of artificial scenes to the reconstructed image. Additionally, a method to avoid the sophisticated matrix regularization and inversion techniques usually applied in microwave interferometry is presented. Image reconstruction algorithms are implemented on a minimum grid size in order to maximize their numerical efficiency. An improved method to apply an apodization window to the reconstructed image for reducing Gibbs oscillations is also proposed. All procedures are generally described considering the single polarization case and successively implemented applying the MIRAS layout in both its single polarization and full polarimetric modes. Results show similar performance of the proposed algorithm with respect to the nominal one applied by SMOS. All algorithms are implemented in the MIRAS Testing Software and have been successfully used for scientific studies by other teams., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Correcting the FRA systematic error in VTEC maps from SMOS radiometric data

  • Rubino, Roselena
  • Duffo Ubeda, Núria
  • González Gambau, Verónica
  • Corbella Sanahuja, Ignasi
  • Torres Torres, Francisco
  • Oliva Balagué, Roger
  • Martín Neira, Manuel
The Faraday rotation (FR) is a nonnegligible effect at the L-band, which is the operation frequency of the Soil Moisture and Ocean Salinity (SMOS) mission. This effect introduces a rotation in the electromagnetic field polarization when propagating through the ionosphere that must be compensated. Recently, a methodology was developed in order to retrieve the vertical total electron content (VTEC) from SMOS radiometric data with the aim to better correct the FR effect [1] . In that work, systematic patterns in the retrieved FR angle (FRA) were detected. In this article, these systematic patterns are characterized and corrected to improve the quality of the retrieved VTEC maps. These maps can be then reused in the SMOS level 2 processor for the correction of the FRA in the mission. The impact of using the SMOS-derived VTEC maps instead of the VTEC data from global positioning system (GPS) measurements on the ocean brightness temperatures (TB) measurement has also been analyzed. Results of this analysis show that the usage of those maps allows a significant enhancement in the quality of the TB, which will lead to an improvement on salinity retrievals., This work was supported in part by the European Space Agency, Soil Moisture and Ocean Salinity (SMOS) Expert Support Laboratories (ESL) for SMOS Level 1 and Level 2 over Land, Ocean and Ice Project under Grant RFQ/3-16138/19/I-BG; in part by the SMOS P7 under Contract DME CP12 no. 2015-005 (in joint with Deimos Engenharia, Portugal); in part by the Spanish Public Funds under Project TEC2017-88850-R and Project ESP2015-67549-C3-1-R through the Award “Unidad de Excelencia María de Maeztu” MDM-2016-0600, financed by the “Agencia Estatal de Investigación” (Spain); in part by the European Regional Development (ERDF); in part by the SMOS ESL for SMOS Level 1 and Level 2 over Land, Ocean and Ice Project under Grant ARG/003-032/0315/ICMCSIC; in part by the Spanish Research and Development Project INTERACT under Grant PID2020-114623RB-C31; and in part by the Spanish Government through the “Severo Ochoa Centre of Excellence” accreditation under Grant CEX2019-000928-S., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Calibration of the MIRAS Radiometers

  • Corbella Sanahuja, Ignasi
  • Torres Torres, Francisco
  • Duffo Ubeda, Núria
  • Durán Martínez, Israel
  • González Gambau, Verónica
  • Oliva Balagué, Roger
  • Closa, Josep
  • Martín Neira, Manuel
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The microwave imaging radiometer with aperture synthesis (MIRAS) is formed by 69 total power radiometers, of which three are the noise-injection type. Their calibration is reviewed on the basis of the data gathered during more than eight years of operation. Internally calibrated gain and offset corrections with improved temporal stability are presented. New front-end loss characterization with lower seasonal dependence originated from external temperature swings is also proposed. Finally, a methodology to validate the external calibrations, with the instrument pointing to the cold sky, is developed. It seems to indicate that the change of orientation of the instrument, with associated thermal variations, may induce small changes in the radiometer front-end losses, thus introducing calibration errors., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Validation of SMOS L3 and L4 soil moisture products in the REMEDHUS (Spain) and CEMADEN (brazil) networks, Validação de produtos de umidade do solo, SMOS L3 e L4, nas redes REMEDHUS (Espanha) e CEMADEN (Brasil)

  • Rossato, Luciana
  • Vall-Llossera Ferran, Mercedes Magdalena
  • Camps Carmona, Adriano José
  • Chaparro Danon, David
  • Alvalá, Regina Célia dos Santos
  • Barbosa Alves, Humberto
This work analyzes the quality of the soil moisture L3 (25 km) and L4 (1 km) products generated at the Barcelona Expert Center (BEC) in two sites located in distinct semi-arid regions, where measurement networks are installed: “Red de Estaciones de Medición de la Humedad del Suelo” (REMEDHUS), which is located in the central part of the Duero basin (Spain), and National Center for Monitoring and Early Warning of Natural Disasters (CEMADEN), at Northeast of the Brazil. REMEDHUS has been used as a calibration/validation site for SMOS and SMAP missions. It is a dense network covering 35 x 35 km2 and it has 22 stations. The CEMADEN network provides a database for the development of early warnings for natural disasters that occurs in Brazil, such as droughts and floods. It is a sparse network covering 1000 x 1000 km2 with more than 500 station. Results show good correspondence between SMOS L4 data and the in situ soil moisture data for REMEDHUS and CEMADEN networks. Correlations mean range from 0.3 to 0.8, and depend mainly on the station situation, soil type, and land cover on both Spain and Brazil networks. For the average data of both series, the correlation coefficient is higher than 0.6. Results show that the L4 product are better correlated than the L3 product, although L4 and L3 products are quite similar. This indicates that both products are ready for its operational use, with L4 providing a better representation of the soil moisture status at finer scales., Este trabalho analisa a qualidade dos produtos L3 (25 km) e L4 (1 km) de umidade do solo gerados no Barcelona Expert Center (BEC) em dois locais localizados em regiões semi-áridas distintas, onde estão instaladas redes de medição: Estações de Medição de Umidade do Solo” (REMEDHUS), localizado na parte central da bacia do Douro (Espanha), e Centro Nacional de Monitoramento e Aviso Prévio de Desastres Naturais (CEMADEN), no nordeste do Brasil. O REMEDHUS foi usado como um local de calibração / validação para missões SMOS e SMAP. É uma rede densa cobrindo 35 x 35 km2 e possui 22 estações. A rede CEMADEN fornece um banco de dados para o desenvolvimento de alertas precoces de desastres naturais que ocorrem no Brasil, como secas e inundações. É uma rede esparsa cobrindo 1000 x 1000 km2 com mais de 500 estações. Os resultados mostram boa correspondência entre os dados SMOS L4 e os dados de umidade do solo in situ para as redes REMEDHUS e CEMADEN. As correlações variam de 0,3 a 0,8 e dependem principalmente da situação da estação, tipo de solo e cobertura do solo nas redes da Espanha e do Brasil. Para os dados médios de ambas as séries, o coeficiente de correlação é superior a 0,6. Os resultados mostram que o produto L4 está melhor correlacionado que o produto L3, embora os produtos L4 e L3 sejam bastante semelhantes. Isso indica que ambos os produtos estão prontos para seu uso operacional, com L4 fornecendo uma melhor representação do status de umidade do solo em escalas mais refinadas, This work was supported by the Spanish Ministry of Economy and Competitiveness, through the project PROMISES: Productos y servicios innovadores con sensores de microondas, SMOS y Sentinels para tierra ESP2015-67549-C3- 1-R and the ERDF (European Regional Development Fund). And though the award “Unidad de Excellencia María de Maetzu MDM2016-0600, financed by the Agencia Estatal de Investigación (Spain)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A spatially consistent downscaling approach for SMOS using an adaptive moving window

  • Portal González, Gerard
  • Vall-Llossera Ferran, Mercedes Magdalena
  • Piles de la Fuente, María Pilar
  • Camps Carmona, Adriano José
  • Chaparro Danon, David
  • Pablos Hernández, Miriam
  • Rossato, Luciana
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The European Space Agency (ESA)'s Soil Moisture and Ocean Salinity (SMOS) is the first spaceborne mission using L-band radiometry to monitor the Earth's global surface soil moisture (SM). After more than 7 years in orbit, many studies have contributed to improve the quality and applicability of SMOS-derived SM maps. In this research, a novel downscaling algorithm for SMOS is proposed to obtain high-resolution (HR) SM maps at 1 km (L4), from the ~40 km native resolution of the instrument. This algorithm introduces the concept of a shape adaptive moving window as an improvement of the current semi-empirical downscaling approach at SMOS Barcelona Expert Center, based on the “universal triangle”. Its inputs are as follows: the SMOS SM (L3 at ~40 km spatial resolution), the vertical and the horizontal SMOS brightness temperatures (L1C at ~40 km), and the HR normalized difference vegetation index and land surface temperature from optical-based sensors. The proposed method has the following advantages: HR SM maps are obtained while maintaining the dynamic range from the original L3 product; energy is conserved, because differences between aggregated L4 and L3 SM maps are negligible; and it can be applied to continental areas, even when they integrate different climates. A comparison of SMOS L3 and L4 products with in situ data for networks allocated in Spain and Australia shows good agreement in terms of correlation and root mean square error. The proposed method is shown to capture 1-km SM spatial variability while preserving the quality of SMOS at its native resolution., This work was supported in part by the Span- ish Ministry of Economy and Competitiveness, through Project PROMISES: Productos y servicios innovadores con sensores de microondas, SMOS y Sen- tinels para tierra ESP2015-67549-C3-1-R, in part by the European Regional Development Fund, in part by the Castilla y Le´on Region Government under Project SA007U16, and in part by the “Unidad de Excelencia Maria de Maeztu MDM-2016-0600,” financed by the “Agencia estatal de Investigac Spain.” M. Piles is supported by a Ram´on y Cajal contract (MINECO)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

One-point microwave radiometer calibration

  • Corbella Sanahuja, Ignasi
  • Torres Torres, Francisco
  • Closa Soteras, Josep
  • Duffo Ubeda, Núria
  • Durán Martínez, Israel
  • González Gambau, Verónica
  • Martín Neira, Manuel
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., A method for internally calibrating microwave total power radiometers by using only one level of noise injection is presented. It is based on having a previous accurate characterization of the receiver noise temperature, which used de facto as a second calibration standard. The method proves to be at least equivalent to the classical two level, as demonstrated through their intercomparison using the data provided by the Microwave Imaging Radiometer using Aperture Synthesis (MIRAS) on board the European Space Agency Soil Moisture and Ocean Salinity (SMOS) Satellite. The long-term stability in terms of retrieved brightness temperature using both methods has similar trends with a small advantage for the one-point approach proposed here., This work was supported in part by the Euro-pean Space Agency with Deimos Enginheria (Portugal) under SMOSP7 Subcontract DME CP12 2015-005 and in part by the Ministerio deEconomía, Industria y Competitividad,Gobierno de España under ProjectTEC2014-58582-R, Project TEC2017-88850-R, and Project ESP2015-67549-C3-1-R., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Sensitivity of L-band vegetation optical depth to carbon stocks in tropical forests: a comparison to higher frequencies and optical indices

  • Chaparro Danon, David
  • Duveiller, Grégory
  • Piles de la Fuente, María Pilar
  • Cescatti, Alessandro
  • Vall-Llossera Ferran, Mercedes Magdalena
  • Camps Carmona, Adriano José
  • Entekhabi, Dara
Supplementary data to this article can be found online at https://doi.org/10.1016/j.rse.2019.111303., Monitoring vegetation carbon in tropical regions is essential to the global carbon assessment and to evaluate the actions oriented to the reduction of forest degradation. Mainly, satellite optical vegetation indices and LiDAR data have been used to this purpose. These two techniques are limited by cloud cover and are sensitive only to the top of vegetation. In addition, the vegetation attenuation to the soil microwave emission, represented by the vegetation optical depth (VOD), has been applied for biomass estimation using frequencies ranging from 4 to 30¿GHz (C- to K-bands). Atmosphere is transparent to microwaves and their sensitivity to canopy layers depends on the frequency, with lower frequencies having greater penetration depths. In this regard, L-band VOD (1.4¿GHz) is expected to enhance the ability to estimate carbon stocks. This study compares the sensitivity of different VOD products (from L, C, and X-bands) and an optical vegetation index (EVI) to the above-ground carbon density (ACD). It quantifies the contribution of ACD and forest cover proportion to the VOD/EVI signals. The study is conducted in Peru, southern Colombia and Panama, where ACD maps have been derived from airborne LiDAR. Results confirm the enhanced sensitivity of L-band VOD to ACD when compared to higher frequency bands, and show that the sensitivity of all VOD bands decreases in the densest forests. ACD explains 34% and forest cover 30% of L-band VOD variance, and these proportions gradually decrease for EVI, C-, and X-band VOD, respectively. Results are consistent through different categories of altitude and carbon density. This pattern is found in most of the studied regions and in flooded forests. Results also show that C-, X-band VOD and EVI provide complementary information to L-band VOD, especially in flooded forests and in mountains, indicating that synergistic approaches could lead to improved retrievals in these regions. Although the assessment of vegetation carbon in the densest forests requires further research, results from this study support the use of new L-band VOD estimates for mapping the carbon of tropical forests., Peer Reviewed, Postprint (author's final draft)