Pasar al contenido principal

CONSERVACION-RESTAURACION DEL PATRIMONIO CULTURAL METALICO POR TECNICAS ELECTROQUIMICAS: INVESTIGACION Y APLICACION

HAR2014-54893-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Non-Destructive Electrochemical Testing for Stainless-Steel Components with Complex Geometry Using Innovative Gel Electrolytes

  • Monrrabal, Gleidys
  • Ramírez Barat, Blanca
  • Bautista, A.
  • Velasco, Francisco
  • Cano Díaz, Emilio
Corrosion can be a problem for stainless steels in chloride-containing or other aggressive environments, especially when they are formed as components with complex shapes. Monitoring the corrosion performance of the stainless steels during their in-service life is not always an easy task. Traditional electrochemical cells can be difficult to adapt to complex surfaces, and undesired crevices or liquid electrolyte leaks can occur. In the presented work, the possible use of non-destructive techniques with innovative gel electrolytes was investigated using portable cells. The electrolytes were based on agar (used as a gelling agent with ionic conductivity), glycerol (a plasticizer that improves adaptability to complex surfaces), and NaCl or KClO4 salts (which improve the conductivity and control the aggression of the tests). X-ray photoelectron spectroscopy (XPS) and Mott–Schottky analysis were carried out to obtain information about the influence of the electrolyte on the passive layer. The oxygen concentration and conductivity in the gels with various glycerol contents were compared to those in liquid electrolytes. Electrochemical impedance spectroscopy (EIS) measurements were carried out in liquids and gels. The performance of the gel cell on a stainless-steel component with a weld and complex shape was checked. The variation in the sensitivity of gels with and without chlorides to identify corrosion-susceptible regions was tested., This research was funded by the Spanish Ministry of Economy (MINECO) project grant numbers TRA2014-56471-C4-2-R and HAR2014-54893-R (CREMEL II)), and Interreg SUDOE (project grant number SOE1/P1/E0307 (KrEaTive Habitat))., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparative assessment of mechanical, chemical and electrochemical procedures for conservation of historical lead

  • Palomar Sanz, Teresa
  • Cano Díaz, Emilio
Lead has a good resistance to atmospheric corrosion because it forms adherent, uniform and protective layers which prevent the corrosion advancement. Nevertheless, the exposure to the acetic and formic acids ¿ emitted by wood and other materials used in museums¿ showcases, cabinets and storehouses ¿ induces a corrosion process which can damage the surface of the objects. In order to improve their conservation, restorers apply different conservation treatments which depends on the degree of corrosion, the products formed, the skills of the conservator and the access to specific equipment, if is required. With the aim of evaluating the impact of successive conservation treatments on lead surface and assessing their efficiency, four usual treatments for lead were selected and six cycles of alteration and treatment were carried out. The assessed procedures were mechanical cleaning (suspension of CaCO3), chemical cleaning (immersion on EDTA solution) and two electrochemical treatments (potentiostatic reduction, and potentiostatic reduction followed by passivation). The samples were characterized before and after each treatment with gravimetry, colorimetry, rugosimetry, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The effects observed on lead coupons depended on each treatment procedure. The mechanical cleaning with CaCO3 produced a significant mass loss and it left an irregular surface due to the granulometry of the abrasive. Additionally, it experienced a fast re-alteration. Chemical cleaning with EDTA produced moderate mass and gloss losses due to the etching of the metallic surface after successive cycles. However, the color of the samples was the closest to the original one. Finally, the electrochemical reductions produced a scarce mass loss and a slow re-alteration, although they produced crystalline deposits on the surface which modified the color of the coupons towards bluish hues., This work has been partially funded by CREMELII Project Ref. HAR2014-54893-R, GEOMATERIALES 2-CM Program Ref. S2013/MIT-2914 and the Fundação do Ministério de Ciência e Tecnologia de Portugal (Post-doctoral grant ref. SFRH/BPD/108403/2015). Professional support from TechnoHeritage (Network on Science and Technology for the Conservation of Cultural Heritage) is also acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Sulfuric Acid Patination Treatment on Atmospheric Corrosion of Weathering Steel

  • Crespo Ibáñez, Ana
  • Díaz, Iván
  • Neff, Delphine
  • Llorente, Irene
  • Martínez-Ramírez, S.
  • Cano Díaz, Emilio
© 2020 by the authors., The requirements for the formation of a protective patina on conventional weathering steels (WS) are well known in the scientific literature related to civil structures. However, these criteria are not always given due consideration when WS is used in cultural heritage, as in the case of sculptural work. An artificial patina was produced simulating artists’ working procedures using a direct patination technique, applying a solution of 10% H2SO4 on WS specimens. These were exposed for two years in the urban atmosphere of Madrid along with weathering steel specimens without artificial patina, called natural patina. The patinas generated have been analyzed using colorimetry, micro-Raman spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD) and thickness measurements.The artificial patina color formed hardly differs from the color that the natural patina acquires from practically the beginning of its formation in the atmosphere of Madrid. After two years, the atmospheric corrosion rate of patinated WS is lower than 6 µm/year. The sulfuric acid treatment accelerates the protective ability of the patina with respect to the natural patina according to the ratio goethite to lepidocrocite (α/γ). Chromium-rich goethite is located in the inner part of the artificial patina as well as chromium-rich ferrihydrite. Ferrihydrite may act as a precursor of nanophasic goethite., This research was funded by Agencia Estatal de Investigación, grant number BES-2015-071472, and by Comunidad de Madrid and European Structural and Investment Funds, project TOP-HERITAGE CM (S2018/NMT-4372) and project GEOMATERIALES 2 (S2013/MIT-2914)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evolution and Evaluation of Aesthetic Properties in Weathering Steel Accelerated Patinas: The Role of Lepidocrocite

  • Crespo Ibáñez, Ana
  • Pérez Álvarez-Quiñones, Gloria
  • Jiménez, José Antonio
  • Llorente, Irene
  • Martínez-Ramírez, S.
  • Cano Díaz, Emilio
  • Díaz, Iván
18 pags., 10 figs., 6 tabs. This article belongs to the Special Issue Metals for Art and Cultural Heritage, Weathering steels are widely used in civil engineering, architecture and contemporary art due to their mechanical properties, their enhanced resistance to atmospheric corrosion as well as their aesthetic properties. Artists and blacksmiths often apply chemical treatments to obtain the appealing colors of a patina in a shorter period of time. However, the development of an accelerated patina may have an effect on the final appearance and color of the surface. With the aim of evaluating differences in color and studying the evolution of the surface, eight accelerated patinas were made and exposed to the atmosphere for periods of time of up to 24 months and were compared to a natural patina. The characterization studies showed the presence of lepidocrocite on the surface. A close inspection of the X-ray diffraction patterns showed the displacement of the (020) lepidocrocite reflection and asymmetric broadening of selective lines of this phase that were associated to stacking and twins faults, respectively. These faults decrease with the exposure time and are related to a maximum at 630 nm in the reflectance spectrum and the stabilization of the b* coordinate (yellow color). The colors of the accelerated patinas differ from the natural patina at short exposure times. However, they tend to converge at longer exposure times., This research was funded by Agencia Estatal de Investigación, grant number BES-2015- 071472; Ministerio de Economía y Competitividad, project CREMEL II (HAR2014-54893-R); and by Comunidad de Madrid and European Structural and Investment Funds, project TOP-HERITAGE CM (S2018/NMT-4372), Peer reviewed