Pasar al contenido principal

METODOS COMPUTACIONALES FIABLES PARA PROBLEMAS DE DIMENSIONES INFINITAS

MTM2011-24766

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario ASOC BCAM - BASQUE CENTER FOR APPLIED MATHEMATICS
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

The airfoil equation on near disjoint intervals: Approximate models and polynomial solutions

  • Farina, L.
  • Ferreira, M.R.S.
  • Peron, V.
The airfoil equation is considered over two disjoint intervals. Assuming the distance between the intervals is small an approximate solution is found and relationships between this approximation and the solution of the classical airfoil equation are obtained. Numerical results show the convergence of the solution of the original problem to the approximation. Polynomial solutions for an approximate model are obtained and a spectral method for the generalized airfoil equation on near disjoint intervals is proposed.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Aerodynamic study of a tricycle wheel subsystem for drag reduction

  • Driant, T.
  • Remaki, L.
  • Fellouah, H.
  • Moreau, S.
  • Desrochers, A.
This paper deals with a computational fluid dynamics (CFD) and experimental drag analysis on an isolated rotating wheel subsystem (including its accessories: tire, suspension, A-arms, and fender) of a motor tricycle vehicle with two wheels in front. The main goal of the present work is to study the effect of the fender on the wheel subsystem drag and its optimization. The Star CCM+ commercial code was used for the numerical simulations. Different flow conditions were simulated and some results were validated by comparison to wind tunnel experimental results. To perform drag optimization, several aerodynamic fender shapes were designed and simulated as part of the subsystem. A drastic drag reduction up to 30.6% compared to the original wheel subsystem was achieved through numerical simulations.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Unstructured, curved elements for the two-dimensional high order discontinuous control-volume/finite-element method

  • Stipcich, G.
  • Piller, M.
Quadrilateral and triangular elements with curved edges are developed in the framework of spectral, discontinuous, hybrid control-volume/finite-element method for elliptic problems. In order to accommodate hybrid meshes, encompassing both triangular and quadrilateral elements, one single mapping is used. The scheme is applied to two-dimensional problems with discontinuous, anisotropic diffusion coefficients, and the exponential convergence of the method is verified in the presence of curved geometries.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Numerical investigation of the aerodynamic performance for a wells-type turbine in a wave energy converter

  • Stipcich, G.
  • Ramezani, A.
  • Nava, V.
  • Touzon, I.
  • Sanchez-Lara, M.
  • Remaki, L.
Ocean waves constitute an extensive energy resource, whose extraction has been the subject of intense research activity in the last three decades. Among the different variants of Wave Energy Converters, the principle of the Oscillating Water Column (OWC) is one of the most promising ones. An OWC comprises two key elements: A collector chamber, which transfers the wave oscillations' energy to the air within the chamber by back and forth displacement, and a power take off system, which converts the pneumatic power into electricity or some other usable form. The Wells turbine is a self-rectifying air turbine, a suitable solution for energy extraction from reciprocating air flow in an OWC. In the present work, the steady state, inviscid flow in the Wells turbine is investigated by numerical simulations. The relatively novel Virtual Multiple Reference Frame (VMRF) technique is used to account for the rotary motion of the turbine, and the overall performance is compared with results in the literature.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Multiple-time-stepping generalized hybrid Monte Carlo methods

  • Escribano, B.
  • Akhmatskaya, E.
  • Reich, S.
  • Azpiroz, J.M.
Performance of the generalized shadow hybrid Monte Carlo (GSHMC) method [1], which proved to be superior in sampling efficiency over its predecessors [2-4], molecular dynamics and hybrid Monte Carlo, can be further improved by combining it with multi-time-stepping (MTS) and mollification of slow forces. We demonstrate that the comparatively simple modifications of the method not only lead to better performance of GSHMC itself but also allow for beating the best performed methods, which use the similar force splitting schemes. In addition we show that the same ideas can be successfully applied to the conventional generalized hybrid Monte Carlo method (GHMC). The resulting methods, MTS-GHMC and MTS-GSHMC, provide accurate reproduction of thermodynamic and dynamical properties, exact temperature control during simulation and computational robustness and efficiency. MTS-GHMC uses a generalized momentum update to achieve weak stochastic stabilization to the molecular dynamics (MD) integrator. MTS-GSHMC adds the use of a shadow (modified) Hamiltonian to filter the MD trajectories in the HMC scheme. We introduce a new shadow Hamiltonian formulation adapted to force-splitting methods. The use of such Hamiltonians improves the acceptance rate of trajectories and has a strong impact on the sampling efficiency of the method. Both methods were implemented in the open-source MD package ProtoMol and were tested on a water and a protein systems. Results were compared to those obtained using a Langevin Molly (LM) method [5] on the same systems. The test results demonstrate the superiority of the new methods over LM in terms of stability, accuracy and sampling efficiency. This suggests that putting the MTS approach in the framework of hybrid Monte Carlo and using the natural stochasticity offered by the generalized hybrid Monte Carlo lead to improving stability of MTS and allow for achieving larger step sizes in the simulation of complex systems.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Constant pressure hybrid Monte Carlo simulations in GROMACS

  • Fernández-Pendás, M.
  • Escribano, B.
  • Radivojevic, T.
  • Akhmatskaya, E.
Adaptation and implementation of the Generalized Shadow Hybrid Monte Carlo (GSHMC) method for molecular simulation at constant pressure in the NPT ensemble are discussed. The resulting method, termed NPT-GSHMC, combines Andersen barostat with GSHMC to enable molecular simulations in the environment natural for biological applications, namely, at constant pressure and constant temperature. Generalized Hybrid Monte Carlo methods are designed to maintain constant temperature and volume and extending their functionality to preserving pressure is not trivial. The theoretical formulation of NPT-GSHMC was previously introduced. Our main contribution is the implementation of this methodology in the GROMACS molecular simulation package and the evaluation of properties of NPT-GSHMC, such as accuracy, performance, effectiveness for real physical systems in comparison with well-established molecular simulation techniques. Benchmarking tests are presented and the obtained preliminary results are promising. For the first time, the generalized hybrid Monte Carlo simulations at constant pressure are available within the popular open source molecular dynamics software package.