Pasar al contenido principal

PROCESAMIENTO DE FLUJO DISTRIBUIDO EN SISTEMAS DE NIEBLA Y BORDE MEDIANTE COMPUTACION TRANSPRECISA

PCI2019-111850-2

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos Programación Conjunta Internacional
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Dataset for anomaly detection in a production wireless mesh community network

  • Cerdà Alabern, Llorenç|||0000-0002-2799-6173
  • Iuhasz, Gabriel
Wireless community networks, WCN, have proliferated around the world. Cheap off-the-shelf WiFi devices have enabled this new network paradigm where users build their own network infrastructure in a do-it-yourself alternative to traditional network operators. The fact that users are responsible for the administration of their own nodes makes the network very dynamic. There are frequent reboots of the networking devices, and users that join and leave the network. In addition, the unplanned deployment of the network makes it very heterogeneous, with both high and low capacity links. Therefore, anomaly detection in such dynamic scenario is challenging. In this paper we provide a dataset gathered from a production WCN. The data was obtained from a central server that collects data from the mesh nodes that build the network. In total, 63 different nodes were encountered during the data collection. The WCN is used daily to access the Internet from 17 subscribers of the local ISP available on the mesh. We have produced a dataset gathering a large set of features related not only to traffic, but other parameters such as CPU and memory. Furthermore, we provide the network topology of each sample in terms of the adjacency matrix, routing table and routing metrics. In the data we provide there is a known unprovoked gateway failure. Therefore, the dataset can be used to investigate the performance of unsupervised machine learning algorithms for fault detection in WCN. To our knowledge, this is the first dataset that allows fault detection to be investigated from a production WCN., This work has received funding through the DiPET CHIST-ERA under grant agreement PCI2019-111850-2; Spanish grant PID2019- 106774RB-C21; Romanian DIPET (62652/15.11.2019) project funded via PN 124/2020; and has been partially supported by the EU research project SERRANO (101017168) and hardware resources courtesy of the Romanian Ministry of Research and Innovation UEFISCDI COCO research project PN III-P4-ID-PCE-2020-0407., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Beyond the star of stars: An introduction to multihop and mesh for LoRa and LoRaWAN

  • Pueyo Centelles, Roger|||0000-0002-3133-0657
  • Freitag, Fèlix|||0000-0001-5438-479X
  • Meseguer Pallarès, Roc|||0000-0002-9414-646X
  • Navarro Moldes, Leandro|||0000-0003-4775-5526
LoRa has emerged in recent years as a wireless technology providing long-range communication for low-power Internet-of-Things (IoT) devices. The LoRaWAN architecture adds the medium access control (MAC) and application layers, and defines a star of stars topology suitable for many and diverse IoT applications. However, in a number of scenarios, a more flexible network topology than LoRaWAN’s is needed. We review the state of the art of the design and implementation of multihop and mesh solutions for LoRa and LoRaWAN. We discuss the remaining challenges for multihop and mesh solutions to overcome in order to unlock the opportunities that decentralized, self-organizing, and infrastructure-less LoRa networks can bring to IoT applications., This work was in part supported by the Spanish Government under Contract PID2019-106774RB-C21, Contract PCI2019-111850-2 (DiPET CHIST-ERA), and Contract PCI2019-111851-2 (LeadingEdge CHIST-ERA), and in part by the Generalitat de Catalunya as Consolidated Research Group 2017-SGR-990., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

An IoT-based infrastructure to enhance self-evacuations in natural hazardous events

  • Finochietto, José Mariano
  • Micheletto, Matías
  • Eggly, Gabriel M.
  • Pueyo Centelles, Roger|||0000-0002-3133-0657
  • Santos, Rodrigo
  • Ochoa, Sergio F.
  • Meseguer Pallarès, Roc|||0000-0002-9414-646X
  • Orozco, Javier
Regardless of the extensive research conducted on large-scale evacuations, the instrumentation of these processes still represents an open issue for first response organizations. Self-evacuation of civilians that follows evacuation plans has shown to be feasible as early response to several natural disasters; however, the typical lack of interaction capability of the evacuees with first response organizations and emergency managers jeopardizes the effectiveness of these processes. This article proposes an IoT-based infrastructure that supports self-evacuation of civilians in mass processes, allowing people to participate as information providers and consumers. This infrastructure is the backbone of an ambient intelligence system used as a bridge between evacuees, first response units, and the emergency operation center managing the process. Depending on the people location and the status of the area, the system implements breadcrumbs that guide people to shelters and safe places. The proposed infrastructure includes (1) an architecture that captures the core design aspects of the solution and makes it reusable for other researchers, (2) an implementation of the system based on Raspberry Pi 3 devices with LoRa radio connectivity, (3) a mobile application that allows evacuees to interact with the evacuation system, and (4) a simplified algorithm to support the deployment of the IoT-based infrastructure into an urban area. The solution was evaluated using real measurements and simulations, and the obtained results are highly encouraging., This work was partially funded by the Spanish Government under contract PID2019-106774RB-C21, the Spanish State Research Agency (AEI) under contracts PCI2019-111850-2 and PCI2019-111851-2 and the Generalitat de Catalunya as Consolidated Research Group 2017-SGR-990., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

The effects of weight quantization on online federated learning for the IoT: a case study

  • Llisterri Giménez, Nil
  • Lee, Junkyu
  • Freitag, Fèlix|||0000-0001-5438-479X
  • Vandierendonck, Hans
Many weight quantization approaches were explored to save the communication bandwidth between the clients and the server in federated learning using high-end computing machines. However, there is a lack of weight quantization research for online federated learning using TinyML devices which are restricted by the mini-batch size, the neural network size, and the communication method due to their severe hardware resource constraints and power budgets. We name Tiny Online Federated Learning (TinyOFL) for online federated learning using TinyML devices in the Internet of Things (IoT). This paper performs a comprehensive analysis of the effects of weight quantization in TinyOFL in terms of accuracy, stability, overfitting, communication efficiency, energy consumption, and delivery time, and extracts practical guidelines on how to apply the weight quantization to TinyOFL. Our analysis is supported by a TinyOFL case study with three Arduino Portenta H7 boards running federated learning clients for a keyword spotting task. Our findings include that in TinyOFL, a more aggressive weight quantization can be allowed than in online learning without FL, without affecting the accuracy thanks to TinyOFL’s quasi-batch training property. For example, using 7-bit weights achieved the equivalent accuracy to 32-bit floating point weights, while saving communication bandwidth by 4.6× . Overfitting by increasing network width rarely occurs in TinyOFL, but may occur if strong weight quantization is applied. The experiments also showed that there is a design space for TinyOFL applications by compensating for the accuracy loss due to weight quantization with an increase of the neural network size., This work was supported in part by the European Union’s Horizon 2020 Research and Innovation Program (ASSIST-IoT) under Grant 957258, in part by the Spanish Government (DiPET CHIST-ERA) under Contract PID2019-106774RB-C21 and Contract PCI2019-111850-2, and in part by the Generalitat de Catalunya as Consolidated Research Group under Grant 2021-SGR-01059., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Anomaly detection for fault detection in wireless community networks using machine learning

  • Cerdà Alabern, Llorenç|||0000-0002-2799-6173
  • Iuhasz, Gabriel
  • Gemmi, Gabriele
Machine learning has received increasing attention in computer science in recent years and many types of methods have been proposed. In computer networks, little attention has been paid to the use of ML for fault detection, the main reason being the lack of datasets. This is motivated by the reluctance of network operators to share data about their infrastructure and network failures. In this paper, we attempt to fill this gap using anomaly detection techniques to discern hardware failure events in wireless community networks. For this purpose we use 4 unsupervised machine learning, ML, approaches based on different principles. We have built a dataset from a production wireless community network, gathering traffic and non-traffic features, e.g. CPU and memory. For the numerical analysis we investigated the ability of the different ML approaches to detect an unprovoked gateway failure that occurred during data collection. Our numerical results show that all the tested approaches improve to detect the gateway failure when non-traffic features are also considered. We see that, when properly tuned, all ML methods are effective to detect the failure. Nonetheless, using decision boundaries and other analysis techniques we observe significant different behavior among the ML methods., This work has received funding through the DiPET CHIST-ERA under grant agreement PCI2019-111850-2; Spanish grant PID2019-106774RB-C21; Romanian DIPET (62652/15.11.2019) project funded via PN 124/2020; and has been partially supported by the EU research project SERRANO (101017168) and hardware resources courtesy of the Romanian Ministry of Research and Innovation UEFISCDI COCO research project PN III-P4-ID-PCE-2020-0407., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

On-device training of machine learning models on microcontrollers with federated learning

  • Llisterri Giménez, Nil
  • Monfort Grau, Marc
  • Pueyo Centelles, Roger|||0000-0002-3133-0657
  • Freitag, Fèlix|||0000-0001-5438-479X
Recent progress in machine learning frameworks has made it possible to now perform inference with models using cheap, tiny microcontrollers. Training of machine learning models for these tiny devices, however, is typically done separately on powerful computers. This way, the training process has abundant CPU and memory resources to process large stored datasets. In this work, we explore a different approach: training the machine learning model directly on the microcontroller and extending the training process with federated learning. We implement this approach for a keyword spotting task. We conduct experiments with real devices to characterize the learning behavior and resource consumption for different hyperparameters and federated learning configurations. We observed that in the case of training locally with fewer data, more frequent federated learning rounds more quickly reduced the training loss but involved a cost of higher bandwidth usage and longer training time. Our results indicate that, depending on the specific application, there is a need to determine the trade-off between the requirements and the resource usage of the system., This work has received funding from the Spanish Government under contracts PID2019-106774RB-C21, PCI2019-111851-2 (LeadingEdge CHIST-ERA), PCI2019-111850-2 (DiPET CHIST-ERA)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Embedded federated learning over a LoRa mesh network

  • Llisterri i Giménez, Nil|||0000-0003-1896-2868
  • Miquel Solé, Joan|||0000-0003-3737-376X
  • Freitag, Fèlix|||0000-0001-5438-479X
In on-device training of machine learning models on microcontrollers a neural network is trained on the device. A specific approach for collaborative on-device training is federated learning. In this paper, we propose embedded federated learning on microcontroller boards using the communication capacity of a LoRa mesh network. We apply a dual board design: The machine learning application that contains a neural network is trained for a keyword spotting task on the Arduino Portenta H7. For the networking of the federated learning process, the Portenta is connected to a TTGO LORA32 board that operates as a router within a LoRa mesh network. We experiment the federated learning application on the LoRa mesh network and analyze the network, system, and application level performance. The results from our experimentation suggest the feasibility of the proposed system and exemplify an implementation of a distributed application with re-trainable compute nodes, interconnected over LoRa, entirely deployed at the tiny edge., This work was supported by the Spanish Government under contracts PID2019-106774RB-C21, PCI2019-111851-2 (LeadingEdge CHIST-ERA), PCI2019-111850-2 (DiPET CHIST-ERA)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Implementation of a LoRa Mesh library

  • Miquel Solé, Joan|||0000-0003-3737-376X
  • Pueyo Centelles, Roger|||0000-0002-3133-0657
  • Freitag, Fèlix|||0000-0001-5438-479X
  • Meseguer Pallarès, Roc|||0000-0002-9414-646X
LoRa is a popular communication technology in the Internet of Things (IoT) domain, providing low-power and long-range communications. Most LoRa IoT applications use the LoRaWAN architecture, which builds a star topology between LoRa end nodes and the gateway they connect to. However, LoRa can also be used for the communication between end nodes themselves, forming a mesh network topology. In this paper, we present a library that allows to integrate LoRa end nodes into a LoRa mesh network, in which a routing protocol is used. Thus, an IoT application running on these nodes can use the library to send and receive data packets to and from other nodes in the LoRa mesh network. The designed routing protocol is proactive, and maintains the routing table at each node updated by sending routing messages between neighboring nodes. The implemented library has been tested on embedded boards featuring an ESP32 microcontroller and a LoRa single-channel radio. By using our LoRa mesh library, nodes do not need to connect to a LoRaWAN gateway, but among themselves. This opens the possibility for new, distributed applications solely built upon tiny IoT nodes., This work was supported by the Ministry of Science and Innovation of the Spanish Government through the State Research Agency (AEI) under Project PID2019-106774RB-C21, Project PCI2019-111851-2 (LeadingEdge CHIST-ERA), and Project PCI2019-111850-2 (DiPET CHIST-ERA)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A two-stage multi-criteria optimization method for service placement in decentralized edge micro-clouds

  • Panadero, Javier
  • Selimi, Mennan
  • Calvet Liñán, Laura
  • Marques Puig, Joan Manuel
  • Freitag, Fèlix|||0000-0001-5438-479X
Community networks are becoming increasingly popular due to the growing demand for network connectivity in both rural and urban areas. Community networks are owned and managed at the edge by volunteers. Their irregular topology, the heterogeneity of resources and their unreliable behavior claim for advanced optimization methods to place services in the network. In particular, an efficient service placement method is key for the performance of these systems. This work presents the Multi-Criteria Optimal Placement method, a novel and fast two-stage multi-objective method to place services in decentralized community network edge micro-clouds. A comprehensive set of computational experiments is carried out using real traces of Guifi.net, which is the largest production community network worldwide. According to the results, the proposed method outperforms both the random placement method used currently in Guifi.net and the Bandwidth-aware Service Placement method, which provides the best known solutions in the literature, by a mean gap in bandwidth gain of about 53% and 10%, respectively, while it also reduces the number of resources used., This work has been partially supported by the Spanish Ministry of Science, Innovation and Universities (PGC2018-097599-B-100 and PID2019-106774RB-C21), and by the Spanish State Research Agency (AEI) under contracts PCI2019-111850-2 (DiPET CHIST-ERA) and PCI2019-111851-2 (LeadingEdge CHIST-ERA)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An IoT-based infrastructure to enhance self-evacuations in natural hazardous events

  • Finochietto, José Mariano
  • Micheletto, Matías
  • Eggly, Gabriel M.
  • Pueyo Centelles, Roger
  • Santos, Rodrigo
  • Ochoa, Sergio F.
  • Meseguer Pallarès, Roc
  • Orozco, Javier
Regardless of the extensive research conducted on large-scale evacuations, the instrumentation of these processes still represents an open issue for first response organizations. Self-evacuation of civilians that follows evacuation plans has shown to be feasible as early response to several natural disasters; however, the typical lack of interaction capability of the evacuees with first response organizations and emergency managers jeopardizes the effectiveness of these processes. This article proposes an IoT-based infrastructure that supports self-evacuation of civilians in mass processes, allowing people to participate as information providers and consumers. This infrastructure is the backbone of an ambient intelligence system used as a bridge between evacuees, first response units, and the emergency operation center managing the process. Depending on the people location and the status of the area, the system implements breadcrumbs that guide people to shelters and safe places. The proposed infrastructure includes (1) an architecture that captures the core design aspects of the solution and makes it reusable for other researchers, (2) an implementation of the system based on Raspberry Pi 3 devices with LoRa radio connectivity, (3) a mobile application that allows evacuees to interact with the evacuation system, and (4) a simplified algorithm to support the deployment of the IoT-based infrastructure into an urban area. The solution was evaluated using real measurements and simulations, and the obtained results are highly encouraging., This work was partially funded by the Spanish Government under contract PID2019-106774RB-C21, the Spanish State Research Agency (AEI) under contracts PCI2019-111850-2 and PCI2019-111851-2 and the Generalitat de Catalunya as Consolidated Research Group 2017-SGR-990., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Anomaly detection for fault detection in wireless community networks using machine learning

  • Cerdà Alabern, Llorenç
  • Iuhasz, Gabriel
  • Gemmi, Gabriele
Machine learning has received increasing attention in computer science in recent years and many types of methods have been proposed. In computer networks, little attention has been paid to the use of ML for fault detection, the main reason being the lack of datasets. This is motivated by the reluctance of network operators to share data about their infrastructure and network failures. In this paper, we attempt to fill this gap using anomaly detection techniques to discern hardware failure events in wireless community networks. For this purpose we use 4 unsupervised machine learning, ML, approaches based on different principles. We have built a dataset from a production wireless community network, gathering traffic and non-traffic features, e.g. CPU and memory. For the numerical analysis we investigated the ability of the different ML approaches to detect an unprovoked gateway failure that occurred during data collection. Our numerical results show that all the tested approaches improve to detect the gateway failure when non-traffic features are also considered. We see that, when properly tuned, all ML methods are effective to detect the failure. Nonetheless, using decision boundaries and other analysis techniques we observe significant different behavior among the ML methods., This work has received funding through the DiPET CHIST-ERA under grant agreement PCI2019-111850-2; Spanish grant PID2019-106774RB-C21; Romanian DIPET (62652/15.11.2019) project funded via PN 124/2020; and has been partially supported by the EU research project SERRANO (101017168) and hardware resources courtesy of the Romanian Ministry of Research and Innovation UEFISCDI COCO research project PN III-P4-ID-PCE-2020-0407., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The effects of weight quantization on online federated learning for the IoT: a case study

  • Llisterri Giménez, Nil
  • Lee, Junkyu
  • Freitag, Fèlix
  • Vandierendonck, Hans
Many weight quantization approaches were explored to save the communication bandwidth between the clients and the server in federated learning using high-end computing machines. However, there is a lack of weight quantization research for online federated learning using TinyML devices which are restricted by the mini-batch size, the neural network size, and the communication method due to their severe hardware resource constraints and power budgets. We name Tiny Online Federated Learning (TinyOFL) for online federated learning using TinyML devices in the Internet of Things (IoT). This paper performs a comprehensive analysis of the effects of weight quantization in TinyOFL in terms of accuracy, stability, overfitting, communication efficiency, energy consumption, and delivery time, and extracts practical guidelines on how to apply the weight quantization to TinyOFL. Our analysis is supported by a TinyOFL case study with three Arduino Portenta H7 boards running federated learning clients for a keyword spotting task. Our findings include that in TinyOFL, a more aggressive weight quantization can be allowed than in online learning without FL, without affecting the accuracy thanks to TinyOFL’s quasi-batch training property. For example, using 7-bit weights achieved the equivalent accuracy to 32-bit floating point weights, while saving communication bandwidth by 4.6× . Overfitting by increasing network width rarely occurs in TinyOFL, but may occur if strong weight quantization is applied. The experiments also showed that there is a design space for TinyOFL applications by compensating for the accuracy loss due to weight quantization with an increase of the neural network size., This work was supported in part by the European Union’s Horizon 2020 Research and Innovation Program (ASSIST-IoT) under Grant 957258, in part by the Spanish Government (DiPET CHIST-ERA) under Contract PID2019-106774RB-C21 and Contract PCI2019-111850-2, and in part by the Generalitat de Catalunya as Consolidated Research Group under Grant 2021-SGR-01059., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

On-device training of machine learning models on microcontrollers with federated learning

  • Llisterri Giménez, Nil
  • Monfort Grau, Marc
  • Pueyo Centelles, Roger
  • Freitag, Fèlix
Recent progress in machine learning frameworks has made it possible to now perform inference with models using cheap, tiny microcontrollers. Training of machine learning models for these tiny devices, however, is typically done separately on powerful computers. This way, the training process has abundant CPU and memory resources to process large stored datasets. In this work, we explore a different approach: training the machine learning model directly on the microcontroller and extending the training process with federated learning. We implement this approach for a keyword spotting task. We conduct experiments with real devices to characterize the learning behavior and resource consumption for different hyperparameters and federated learning configurations. We observed that in the case of training locally with fewer data, more frequent federated learning rounds more quickly reduced the training loss but involved a cost of higher bandwidth usage and longer training time. Our results indicate that, depending on the specific application, there is a need to determine the trade-off between the requirements and the resource usage of the system., This work has received funding from the Spanish Government under contracts PID2019-106774RB-C21, PCI2019-111851-2 (LeadingEdge CHIST-ERA), PCI2019-111850-2 (DiPET CHIST-ERA)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Dataset for anomaly detection in a production wireless mesh community network

  • Cerdà Alabern, Llorenç
  • Iuhasz, Gabriel
Wireless community networks, WCN, have proliferated around the world. Cheap off-the-shelf WiFi devices have enabled this new network paradigm where users build their own network infrastructure in a do-it-yourself alternative to traditional network operators. The fact that users are responsible for the administration of their own nodes makes the network very dynamic. There are frequent reboots of the networking devices, and users that join and leave the network. In addition, the unplanned deployment of the network makes it very heterogeneous, with both high and low capacity links. Therefore, anomaly detection in such dynamic scenario is challenging. In this paper we provide a dataset gathered from a production WCN. The data was obtained from a central server that collects data from the mesh nodes that build the network. In total, 63 different nodes were encountered during the data collection. The WCN is used daily to access the Internet from 17 subscribers of the local ISP available on the mesh. We have produced a dataset gathering a large set of features related not only to traffic, but other parameters such as CPU and memory. Furthermore, we provide the network topology of each sample in terms of the adjacency matrix, routing table and routing metrics. In the data we provide there is a known unprovoked gateway failure. Therefore, the dataset can be used to investigate the performance of unsupervised machine learning algorithms for fault detection in WCN. To our knowledge, this is the first dataset that allows fault detection to be investigated from a production WCN., This work has received funding through the DiPET CHIST-ERA under grant agreement PCI2019-111850-2; Spanish grant PID2019- 106774RB-C21; Romanian DIPET (62652/15.11.2019) project funded via PN 124/2020; and has been partially supported by the EU research project SERRANO (101017168) and hardware resources courtesy of the Romanian Ministry of Research and Innovation UEFISCDI COCO research project PN III-P4-ID-PCE-2020-0407., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Implementation of a LoRa Mesh library

  • Miquel Solé, Joan
  • Pueyo Centelles, Roger
  • Freitag, Fèlix
  • Meseguer Pallarès, Roc
LoRa is a popular communication technology in the Internet of Things (IoT) domain, providing low-power and long-range communications. Most LoRa IoT applications use the LoRaWAN architecture, which builds a star topology between LoRa end nodes and the gateway they connect to. However, LoRa can also be used for the communication between end nodes themselves, forming a mesh network topology. In this paper, we present a library that allows to integrate LoRa end nodes into a LoRa mesh network, in which a routing protocol is used. Thus, an IoT application running on these nodes can use the library to send and receive data packets to and from other nodes in the LoRa mesh network. The designed routing protocol is proactive, and maintains the routing table at each node updated by sending routing messages between neighboring nodes. The implemented library has been tested on embedded boards featuring an ESP32 microcontroller and a LoRa single-channel radio. By using our LoRa mesh library, nodes do not need to connect to a LoRaWAN gateway, but among themselves. This opens the possibility for new, distributed applications solely built upon tiny IoT nodes., This work was supported by the Ministry of Science and Innovation of the Spanish Government through the State Research Agency (AEI) under Project PID2019-106774RB-C21, Project PCI2019-111851-2 (LeadingEdge CHIST-ERA), and Project PCI2019-111850-2 (DiPET CHIST-ERA)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Embedded federated learning over a LoRa mesh network

  • Llisterri i Giménez, Nil
  • Miquel Solé, Joan
  • Freitag, Fèlix
In on-device training of machine learning models on microcontrollers a neural network is trained on the device. A specific approach for collaborative on-device training is federated learning. In this paper, we propose embedded federated learning on microcontroller boards using the communication capacity of a LoRa mesh network. We apply a dual board design: The machine learning application that contains a neural network is trained for a keyword spotting task on the Arduino Portenta H7. For the networking of the federated learning process, the Portenta is connected to a TTGO LORA32 board that operates as a router within a LoRa mesh network. We experiment the federated learning application on the LoRa mesh network and analyze the network, system, and application level performance. The results from our experimentation suggest the feasibility of the proposed system and exemplify an implementation of a distributed application with re-trainable compute nodes, interconnected over LoRa, entirely deployed at the tiny edge., This work was supported by the Spanish Government under contracts PID2019-106774RB-C21, PCI2019-111851-2 (LeadingEdge CHIST-ERA), PCI2019-111850-2 (DiPET CHIST-ERA)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Beyond the star of stars: An introduction to multihop and mesh for LoRa and LoRaWAN

  • Pueyo Centelles, Roger
  • Freitag, Fèlix
  • Meseguer Pallarès, Roc
  • Navarro Moldes, Leandro
LoRa has emerged in recent years as a wireless technology providing long-range communication for low-power Internet-of-Things (IoT) devices. The LoRaWAN architecture adds the medium access control (MAC) and application layers, and defines a star of stars topology suitable for many and diverse IoT applications. However, in a number of scenarios, a more flexible network topology than LoRaWAN’s is needed. We review the state of the art of the design and implementation of multihop and mesh solutions for LoRa and LoRaWAN. We discuss the remaining challenges for multihop and mesh solutions to overcome in order to unlock the opportunities that decentralized, self-organizing, and infrastructure-less LoRa networks can bring to IoT applications., This work was in part supported by the Spanish Government under Contract PID2019-106774RB-C21, Contract PCI2019-111850-2 (DiPET CHIST-ERA), and Contract PCI2019-111851-2 (LeadingEdge CHIST-ERA), and in part by the Generalitat de Catalunya as Consolidated Research Group 2017-SGR-990., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A two-stage multi-criteria optimization method for service placement in decentralized edge micro-clouds

  • Panadero, Javier
  • Selimi, Mennan
  • Calvet Liñán, Laura
  • Marques Puig, Joan Manuel
  • Freitag, Fèlix
Community networks are becoming increasingly popular due to the growing demand for network connectivity in both rural and urban areas. Community networks are owned and managed at the edge by volunteers. Their irregular topology, the heterogeneity of resources and their unreliable behavior claim for advanced optimization methods to place services in the network. In particular, an efficient service placement method is key for the performance of these systems. This work presents the Multi-Criteria Optimal Placement method, a novel and fast two-stage multi-objective method to place services in decentralized community network edge micro-clouds. A comprehensive set of computational experiments is carried out using real traces of Guifi.net, which is the largest production community network worldwide. According to the results, the proposed method outperforms both the random placement method used currently in Guifi.net and the Bandwidth-aware Service Placement method, which provides the best known solutions in the literature, by a mean gap in bandwidth gain of about 53% and 10%, respectively, while it also reduces the number of resources used., This work has been partially supported by the Spanish Ministry of Science, Innovation and Universities (PGC2018-097599-B-100 and PID2019-106774RB-C21), and by the Spanish State Research Agency (AEI) under contracts PCI2019-111850-2 (DiPET CHIST-ERA) and PCI2019-111851-2 (LeadingEdge CHIST-ERA)., Peer Reviewed, Postprint (author's final draft)
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A two-stage multi-criteria optimization method for service placement in decentralized edge micro-clouds

  • Panadero, Javier|||0000-0002-3793-3328
  • Selimi, Mennan|||0000-0001-9644-5415
  • Calvet, Laura|||0000-0001-8425-1381
  • Marquès Puig, Joan Manuel
  • Freitag, Felix|||0000-0001-5438-479X
Community networks are becoming increasingly popular due to the growing demand for network connectivity in both rural and urban areas. Community networks are owned and managed at the edge by volunteers. Their irregular topology, the heterogeneity of resources and their unreliable behavior claim for advanced optimization methods to place services in the network. In particular, an efficient service placement method is key for the performance of these systems. This work presents the Multi-Criteria Optimal Placement method, a novel and fast two-stage multi-objective method to place services in decentralized community network edge micro-clouds. A comprehensive set of computational experiments is carried out using real traces of Guifi.net, which is the largest production community network worldwide. According to the results, the proposed method outperforms both the random placement method used currently in Guifi.net and the Bandwidth-aware Service Placement method, which provides the best known solutions in the literature, by a mean gap in bandwidth gain of about 53% and 10%, respectively, while it also reduces the number of resources used.