Pasar al contenido principal

THE VARIABILITY CHALLENGE IN NANO-CMOS: FROM DEVICE MODELING TO IC DESIGN FOR MITIGATION AND EXPLOITATION (VIGILANT-IMSE)

PID2019-103869RB-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE SEVILLA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the impact of the biasing history on the characterization of random telegraph noise

  • Saraza-Canflanca, P.
  • Castro-López, Rafael
  • Roca, Elisenda
  • Martín-Martínez, Javier
  • Rodríguez, Rosana
  • Nafría, Montserrat
  • Fernández, Francisco V.
Random Telegraph Noise is a time-dependent variability phenomenon that has gained increased attention during the last years, especially in deeply-scaled technologies. In particular, there is a wide variety of works presenting different techniques designed to analyze current traces in scaled FET devices displaying Random Telegraph Noise, and others focused on modeling the phenomenon using the parameters extracted through such techniques. However, very little attention has been paid to the effects that the biasing conditions of the transistors prior to the measurements may have on the extraction of the parameters that characterize this phenomenon. This paper investigates how these biasing conditions actually impact the extracted results. Specifically, it is demonstrated that the results obtained when Random Telegraph Noise is measured immediately after the device is biased may lead to an overestimation of the Random Telegraph Noise impact with respect to situations in which the device has been previously biased for some time. This fact is, first, presented from a theoretical point of view, and, after, demonstrated experimentally through measurements obtained from a CMOS-transistor array., MCIN/AEI/10.13039/501100011033 (Grant Number: PID2019-103869RBC31 and PID2019-103869RB-C32) MCIN/AEI/10.13039/501100011033 (Grant Number: BES-2017-080160) “ESF Investing in your future”, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A DRV-based bit selection method for SRAM PUF key generation and its impact on ECCs

  • Santana-Andreo, A.
  • Saraza-Canflanca, P.
  • Carrasco-López, H.
  • Brox, Piedad
  • Castro-López, Rafael
  • Roca, Elisenda
  • Fernández, Francisco V.
- PUFs based on the power-up values of an array of SRAM cells are a popular solution to provide secure and low-cost key generation suitable for IoT devices. However, SRAM cells do not always power up to the same value due to external factors like noise, temperature, or aging. This results in a decrease of reliability for the SRAM PUF, an issue generally solved by employing complex Error Correction Codes (ECCs). However, ECCs significantly increase the cost of the complete system. A way to alleviate this issue is the use of bit selection methods, which increase the reliability of the SRAM PUF by using only the power-up values of the most reliable cells (i.e., the SRAM cells that consistently power up to the same value). In this work, the reduction in ECC complexity through a bit selection method based on the Data Retention Voltage metric is demonstrated., This work was supported by AEI under Project PID2019-103869RB-C31/AEI/10.13039/501100011033, and by P.O. FEDER under project US-1380876. Pablo Sarazá Canflanca and Andrés Santana Andreo acknowledge MICINN for supporting their research activity through the predoctoral grants BES-2017-080160 and PRE-2020-093167, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Determination of the time vonstant distribution of a defect-ventric time-dependent variability model for sub-100-nm FETs

  • Saraza-Canflanca, P.
  • Castro-López, Rafael
  • Roca, Elisenda
  • Martín-Martínez, Javier
  • Rodríguez, Rosana
  • Nafría, Montserrat
  • Fernández, Francisco V.
The origin of some time-dependent variability phenomena in FET technologies has been attributed to the charge carrier trapping/detrapping activity of individual defects present in devices. Although some models have been presented to describe these phenomena from the so-called defect-centric perspective, limited attention has been paid to the complex process that goes from the experimental data of the phenomena up to the final construction of the model and all its components, specifically the one that pertains to the time constant distribution. This article presents a detailed strategy aimed at determining the defect time constant distribution, specifically tailored for small area devices, using data obtained from conventional characterization procedures., This work was supported by grants PID2019-103869RB-C31 and PID2019-103869RB-C32 funded by MCIN/AEI/10.13039/501100011033, and by Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía and P.O. FEDER under project US-1380876., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Addressing a new class of multi-objective passive device optimization for radiofrequency circuit design

  • Passos, Fábio
  • Roca, Elisenda
  • Castro-López, Rafael
  • Fernández, Francisco V.
This article belongs to the Collection Advanced Design Techniques and EDA Methodologies for Analog, RF and MM-Wave Circuit Design., The design of radiofrequency circuits and systems lends itself to multi-objective optimization and the bottom-up composition of Pareto-optimal fronts. Conventional multi-objective optimization algorithms can effectively attain these fronts, which maximize or minimize a set of competing objective functions of interest. However, some of these real-life optimization problems reveal a non-conventional feature: there is one objective function that calls neither for minimization nor maximization. Instead, using the Pareto front demands this objective function to be swept across so that all its feasible values are available. Such a non-conventional feature, as shown here, emerges in the case of inductor optimization. The problem thus turns into a non-conventional one: determining how to find uniformly distributed feasible values of this function over the broadest possible range (typically unknown) while minimizing or maximizing the remaining competing objective functions. An NSGA-II-inspired algorithm is proposed that, based on the dynamic allocation of objective function slots and a modified dominance definition, can successfully return sets of solutions for inductor optimization problems with one sweeping objective. Furthermore, a mathematical benchmark function modeling this kind of problem is presented, which is also used to exhaustively test the proposed algorithm and obtain insight into its parameter settings., This work was supported by grant PID2019-103869RB-C31 funded by MCIN/AEI/10.13039/501100011033. Fabio Passos’ work was also supported by the European Union’s Horizon 2020 research and innovation program under the MSCA grant agreement No. 892431., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

PACOSYT: A Passive Component Synthesis Tool Based on Machine Learning and Tailored Modeling Strategies Towards Optimal RF and mm-Wave Circuit Designs

  • Passos, Fábio
  • Lourenco, Nuno
  • Roca, Elisenda
  • Martins, Ricardo
  • Castro-López, Rafael
  • Horta, Nuno
  • Fernández, Francisco V.
In this paper, the application of regression-based supervised machine learning (ML) methods to the modeling of integrated inductors and transformers is examined. Different ML techniques are used and compared to improve accuracy. However, it is demonstrated that none of the ML techniques considered provided good results unless a smart modeling strategy, tailored to the specific design problem, is used. Taking advantage of these modeling strategies, high accuracy can be obtained when compared to full-wave electromagnetic (EM) simulations (less than 2% error) and experimental measurements (less than 5% error). The most accurate model, obtained by the appropriate combination of an ML technique and modeling strategy, has been integrated into a tool called PACOSYT. The tool uses optimization algorithms to allow the designer to obtain an inductor/transformer with optimal performances in just seconds while keeping the accuracy of EM simulations. Furthermore, the tool provides the passive component S parameter description file for seamless use in circuit simulations. The tool can be used standalone or integrated with design frameworks, like Cadence Virtuoso or AIDASoft, a framework for circuit optimization. To illustrate the different usages of the tool, several passive devices are synthesized, and hundreds of millimeter-wave power amplifiers are synthesized using AIDASoft together with PACOSYT. The tool has been developed using open-source Python frameworks and does not use any closed-source licenses. PACOSYT, which also allows other designers to create their models for different technologies, is made publicly available., This work was supported in part by the European Union’s Horizon 2020 Research and Innovation Program under MSCA Grant Agreement 892431, in part by the Instituto de Telecomunicações Internal Research Projects under Grants LAY(RF)2 (X-0002-LX-20) and HAICAS (X-0009-LX-20), in part by MCIN/AEI/10.13039/ 501100011033 under Grant PID2019-103869RB-C31, and in part by FCT/MCTES through National Funds and when applicable co-funded EU funds under Project UIDB/50008/2020., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reliability improvement of SRAM PUFs based on a detailed experimental study into the stochastic effects of aging

  • Santana-Andreo, A.
  • Saraza-Canflanca, P.
  • Castro-López, Rafael
  • Roca, Elisenda
  • Fernández, Francisco V.
Physical Unclonable Functions (PUFs) have gained attention as a lightweight hardware security primitive. In particular, the SRAM-based PUF uses the unpredictable power-up value of the cells within an SRAM. Although these values should ideally be always the same within each SRAM to accomplish a correct PUF operation, this is often not the case, especially when factors like circuit aging are considered. While certain studies explore the effects of aging on SRAM PUFs, they often simplify the analysis. For instance, some studies assume that only Bias Temperature Instability (BTI) contributes to circuit degradation while others evaluate the overall degradation without accounting for the stochastic effects of aging on each individual cell. In this work, we first perform a detailed characterization of the nature of aging in SRAM PUFs, demonstrating that the impact of Non-Conductive Hot-Carrier Injection cannot be neglected. We also show that different cells degrade differently, highlighting the importance of accounting for the stochasticity of aging. After that, a method based on the Data Retention Voltage metric to select the cells with the most stable power-up response is introduced. Using these cells to generate the PUF identifier will result in a more stable response, and thus a better PUF performance., This work was supported by grant PID2019-103869RB-C31 funded by MCIN/AEI/10.13039/501100011033 and by grant PID2022-136949OB-C21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. Andrés Santana Andreo was supported by grant PRE-2020-093167 funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

On the impact of the biasing history on the characterization of random telegraph noise

  • Saraza-Canflanca, Pablo|||0000-0003-2155-8305
  • Castro-Lopez, Rafael|||0000-0002-6247-3124
  • Roca, Elisenda|||0000-0001-6260-6495
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Rodriguez, R.|||0000-0002-4565-6703
  • Nafria, Montserrat|||0000-0002-9549-2890
  • Fernandez, Francisco V.|||0000-0001-8682-2280
Random telegraph noise (RTN) is a time-dependent variability phenomenon that has gained increased attention during the last years, especially in deeply scaled technologies. In particular, there is a wide variety of works presenting different techniques designed to analyze current traces in scaled FET devices displaying RTN, and others focused on modeling the phenomenon using the parameters extracted through such techniques. However, very little attention has been paid to the effects that the biasing conditions of the transistors prior to the measurements may have on the extraction of the parameters that characterize this phenomenon. This article investigates how these biasing conditions actually impact the extracted results. In particular, it is demonstrated that the results obtained when RTN is measured immediately after the device is biased may lead to an overestimation of the RTN impact with respect to situations in which the device has been previously biased for some time. This fact is, first, presented from a theoretical point of view and, after, demonstrated experimentally through measurements obtained from a CMOS-transistor array.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Determination of the time constant distribution of a defect-centric time-dependent variability model for Sub-100-nm FETs

  • Saraza-Canflanca, Pablo|||0000-0003-2155-8305
  • Castro-Lopez, Rafael|||0000-0002-6247-3124
  • Roca, Elisenda|||0000-0001-6260-6495
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Rodriguez, R.|||0000-0002-4565-6703
  • Nafria, Montserrat|||0000-0002-9549-2890
  • Fernandez, Francisco V.|||0000-0001-8682-2280
The origin of some time-dependent variability phenomena in FET technologies has been attributed to the charge carrier trapping/detrapping activity of individual defects present in devices. Although some models have been presented to describe these phenomena from the so-called defect-centric perspective, limited attention has been paid to the complex process that goes from the experimental data of the phenomena up to the final construction of the model and all its components, specifically the one that pertains to the time constant distribution. This article presents a detailed strategy aimed at determining the defect time constant distribution, specifically tailored for small area devices, using data obtained from conventional characterization procedures.