Pasar al contenido principal

CARACTERIZACION ELECTROMAGNETICA Y ENSAYO DE FUSELAJES INTELIGENTES EN VEHICULOS AEREOS NO TRIPULADOS SOMETIDOS A EFECTOS AMBIENTALES ELECTROMAGNETICOS

PID2019-106120RB-C32

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario INSTITUTO NACIONAL DE TECNICA AEROESPACIAL ESTEBAN TERRADAS (INTA)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Characterization of Joints between Carbon Fiber Composite Parts Using a Microstrip Transmission Line Method

  • Plaza Gallardo, Borja
  • Poyatos Martinez, David
  • López, Daniel
The electromagnetic performance of aerial platforms, which are composed mostly of nonmetallic materials, is a subject of great interest at present time. The behavior of this type of composite structure against electromagnetic environmental effects (E3), such as lightning, is not well-studied as in the case of metalic structures. The purpose of this article is to characterize the joints present in aerial platforms constructed mainly of nonmetallic composite materials. The study of these joints is fundamental because electrical discontinuities or preferential routes can produce changes in the electromagnetic behavior of an aircraft. The proposed measurement system for the characterization of these joints is a microstrip line. The flexibility of the test setup allows for evaluation of different joints in carbon fiber composite (CFC) samples with a different number of plies. Additionally, approximated models of the behavior of the joints as well as the detection of possible defects in the joining process are reported., This research was funded by the Spanish Ministry of Science and Innovation (MICINN) under projects UAVE3 (TEC2016-79214-C3-1-R) and eSAFE-UAV (PID2019-106120RB-C32)., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Coupling Analysis Under Ligthning Indirect Effects For Cable Bundles With Different Ground Plates In Unmanned Aerial Vehicles

  • Ramos Somolinos, D.
  • Morales Blanco, C.
  • López Sanz, Daniel
  • Plaza Gallardo, Borja
  • Poyatos Martinez, David
It is increasingly common in aerospace industries to take advantage of novel composite materials in their manufacturing processes to improve performance and reduce costs. Obtaining the electromagnetic (EM) characterization of these materials or a combination of them is essential to ensure safety and EM compatibility.In this paper, a laminate of the central fuselage of an aircraft developed at INTA is recreated. This aircraft is called MILANO and it is mostly made of Carbon Fiber Composite (CFC). The same material is used for the laminate. Besides, another metallic plate is built in order to compare the performance of the former one with respect to a Perfect Electric Conductor (PEC). The main goal of this work is studying the coupling between the cable bundles embedded in the MILANO and how is this affected by the different materials of the ground plate (metal and CFC). Two kind of tests are carried out: S-parameters measurents and injection of Lightning Indirect Effect (LIE) waveforms. S-parameters results are then obtained through simulation too and compared with both the metallic and the CFC sample., The work described in this paper has been funded by the Spanish Ministry of Science and Innovation (MICINN) under projects UAVE3 (TEC2016-79214-C3-1-R) and eSAFE-UAV (PID2019-106120RB-C32)., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Electromagnetic Characterization of Materials Through High Accuracy Free Space Measurements

  • Poyatos Martinez, David
  • Plaza Gallardo, Borja
  • Ramos Somolinos, D.
Aerospace or automotive industries employ novel composite or 3D printed materials in their manufacturing processes to improve performance and reduce costs. Obtaining the electromagnetic (EM) characterization of these materials or a combination of them is essential to ensure safety and EM compatibility. In this paper, the development of a test bench with rod antennas for measurements in free space is presented. A complete design is described, from simulation analysis to validation measurements. The aim is to achieve robust measurements which allow the EM characterization of very diverse samples and materials, and high accuracy results that make possible to know the exact EM behaviour of these materials., The work described in this paper has been funded by the Spanish Ministry of Science and Innovation (MICINN) under projects UAVE3 (TEC2016-79214-C3-1-R) and eSAFE-UAV (PID2019-106120RB-C32)., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Shielding Effectiveness Measurement of an UAV Simplified Demonstrator Through Low-Level Swept Field (LLSF) Test

  • Ramos Somolinos, D.
  • Díaz Acosta, Laura
  • Gómez de Francisco, Patricia
  • Plaza Gallardo, Borja
  • Cidrás Estévez, José
  • Añón Cancela, M.
  • Frövel, Malte
  • Poyatos Martinez, David
The increasing number of electronic devices on board and the use of novel composite materials in the aerospace industry create a harsh electromagnetic environment that must be studied. In this article, a UAV demonstrator (DEMO-E3) with different test cases is evaluated through the low-level swept field test following a nested resonant chambers approach, which is framed under the high intensity radio frequency measurements. The aim is to analyze the difference in terms of the shielding effectiveness of the enclosure considering the different materials and apertures of each test sample. Some of the test cases had been previously measured independently, according to the IEC 61000-4-21 standard, while in this study, they are incorporated into the demonstrator and former results are used as a comparison., This work was supported by the Ministry of Science and Innovation (MICINN) under the eSAFE-UAV Project under Grant PID2019-106120RB-C32. (Corresponding author: David Poyatos Martínez.), Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Novel electromagnetic characterization methods for new materials and structures in aerospace platforms

  • Ramos Somolinos, D.
  • Peñafield Moravec, Carolina
  • De la Torre Lejarraga, Antonia
  • Frövel, M.
  • Cidrás Estévez, José
  • Plaza Gallardo, Borja
  • Poyatos Martinez, David
The tendency over the last decades in the aerospace industry is to substitute classic metallic materials with new composite materials such as carbon fiber composites (CFC), fiber glass, etc., as well as adding electronic devices to ensure the safety and proper platform operation. Due to this, to protect the aircraft against the Electromagnetic Environmental Effects (E3), it is mandatory to develop accurate electromagnetic (EM) characterization measurement systems to analyze the behavior of new materials and electronic components. In this article, several measurement methods are described to assess the EM behavior of the samples under test: microstrip transmission line for a surface current analysis, free space to obtain intrinsic features of the materials and shielding effectiveness (SE) approaches to figure out how well they isolate from EM fields. The results presented in this work show how the different facilities from the National Institute of Aerospace Technology (INTA) are suitable for such purposes, being capable of measuring a wide variety of materials, depending on the type of test to be carried out., This research was funded by the Spanish Ministry of Science and Innovation (MICINN) under project eSAFE-UAV (PID2019-106120RB-C32)., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

A subcell FDTD Scheme implementation for thin slot modeling

  • Cabello, M. R.
  • Martín Valverde, A. J.
  • Rubio Bretones, Amelia
  • González García, S.
  • Plaza Gallardo, Borja
  • Frövel, Malte
  • Poyatos Martinez, David
The finite-difference time-domain (FDTD) method is not able to efficiently model thin features without a drastic reductions of the spatial mesh size, potentially yielding an unfeasible use of memory and CPU requirements. In this work we propose two stable and efficient techniques for dealing with thin apertures in FDTD, one based on conformal and one based on subgridding. These are compared, in two different scenarios, with the classical dispersive magnetic material approximation [DMMA] based on Gilbert-Holland's models., 10.13039/501100004837-Spanish Ministry of Science and Innovation (Grant Number: eSAFE-UAV PID2019-106120RB-C32), Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Limitations in the Shielding Effectiveness Measurement Methods for Carbon Fiber Composites

  • Plaza Gallardo, Borja
  • Fernández Romero, Sergio
  • Poyatos Martinez, David
  • Gómez de Francisco, Patricia
  • Muñoz Rebate, I.
  • Ramos Somolinos, D.
Novel materials, as multi-ply carbon fiber composites (CFC), are increasingly used in the industry due to their outstanding mechanical properties in relation to their weight. In this regard, from the standpoint of electromagnetic compatibility (EMC), shielding effectiveness (SE) is a key parameter that often determines the scope for application of a given material. This article addresses the application of two complementary standards, ASTM D4935 and IEC 61000-4-21, to the SE measurement of different CFC test samples with more than 10 layers and a very large expected shielding. The analysis of the limitations encountered and the description of applied improvements on the traditional measurement procedures on each method are also included, showing promising results. On the other hand, there are alternative methods to evaluate the SE of CFC based on their DC square resistance. Consequently, and forthe shake of completeness, a novel setup for high precision measurement of the DC square resistance of CFC samples is also described along the article., The work described in this paper has been funded by the Spanish Ministry of Science and Innovation (MICINN) under projects UAVE3 (TEC2016-79214-C3-1-R) and eSAFE-UAV (PID2019-106120RB-C32)., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

A Subcell Finite-Difference Time-Domain Implementation for Narrow Slots on Conductive Panels

  • Ruiz Cabello Núñez, M. D.
  • Martín Valverde, A. J.
  • Rubio Bretones, Amelia
  • Gascón Bravo, Alberto
  • García, S. G.
  • Plaza Gallardo, Borja
  • Frövel, Malte
  • Poyatos Martinez, David
(This article belongs to the Special Issue Feature Papers in 'Electrical, Electronics and Communications Engineering' Section). Ruiz Cabello, M. [0000-0001-9039-6181]; Martín Valverde, J. [0000-0003-1417-1268]; Plaza Gallardo, B. [0000-0003-3615-0353]; Frövel, M. [0000-0001-9447-4036]; Poyatos Martínez, D. [0000-0002-3829-5110] ; Rubio Bretones, A. [0000-0002-9337-9093] ; Gascón Bravo, A. [0000-0003-1190-2248] ; García García, S. [0000-0003-4494-7565]., Efficiently modeling thin features using the finite-difference time-domain (FDTD) method involves a considerable reduction in the spatial mesh size. However, in real-world scenarios, such reductions can lead to unaffordable memory and CPU requirements. In this manuscript, we present two stable and efficient techniques in FDTD to handle narrow apertures on conductive thin panels. One technique employs conformal methods, while the other utilizes subgridding methods. We validate their performance compared to the classical Gilbert-Holland model and present experimental results in reverberation environments to shed light on these models’ actual confidence margins in real electromagnetic compatibility (EMC) scenarios., Funded by the European Union under GA no 101101961—HECATE. Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or Clean Aviation Joint Undertaking. Neither the European Union nor the granting authority can be held responsible for them. The project is supported by the Clean Aviation Joint Undertaking and its Members and, by Spanish Ministry of Science and Innovation (MICINN) under projects eSAFE-UAV PID2019-106120RB-C32; PID2019-106120RB-C33., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Time Domain Simulation of Common Mode Ferrite Chokes at System Level

  • Gascón Bravo, Alberto
  • García, S. G.
  • Muñoz Manterola, Alejandro
  • Moreno, Roberto
  • Tekbaş, Kenan
  • Angulo, L. D.
  • Añón Cancela, M.
Alberto Gascón Bravo(UGR) [0000-0003-1190-2248] ; Salvador G. Garcia(UGR) [0000-0001-7317-1423] ; Alejandro Muñoz Manterola(UGR) [0000-0002-2406-8128] ; Manuel Añón-Cancela [0000-0002-6218-8307] ; Roberto Moreno(UGR) [0000-0003-0032-1931] ; Kenan Tekbas (UGR) [0000-0002-0678-9001] ; and Luis D. Angulo(UGR) [0000-0002-1690-7892]., This article introduces a comprehensive methodology for analyzing common-mode (CM) ferrite chokes in time-domain (TD) methods, employing lumped dispersive loads, and validates it through a typical test setup for cable crosstalk assessment. The analysis begins with the experimental characterization of CM choke material properties using a coaxial line fixture to obtain its constitutive parameters. Subsequently, a simplified lumped dispersive convolutional model is obtained, representing the impedance of the ferrite when placed on a location on the cable. The first approach adopts a multiconductor transmission line (MTL) model for the cables, solving them by a finite-difference (FDTD) space-time scheme. The second approach utilizes the classical full-wave Yee-FDTD method in conjunction with the thin-wire Holland model for cables. The accuracy of the proposed methods is evaluated by comparing simulations performed with MTL-FDTD and Holland-Yee FDTD, to experimental measurements, and results obtained with the the frequency-domain finite element method using a 3-D model of the ferrite with its constitutive parameters. Finally, the validity and performance of the methodologies are critically discussed., "MICINN EU FEDER Projects PID2019.106120RB.C32 and PID2019.106120RB.C33,". MCIN/AEI/10.13039/501100011033 Spanish MICINN EU FEDER (Grant Number: PID2019.106120RB.C33 and PID2019.106120RB.C32) EU Horizon2020 Research and Innovation Programme Marie Sklodowska-Curie Action (Grant Number: 101066571) Junta de Andalucia FEDER (Grant Number: B-TIC-700-UGR20) 10.13039/501100006393-Universidad de Granada CBUA, Peerreview