DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación
Artículo científico (JournalArticle)
Colloidal processing and sintering of WC-based ceramics with low Ni content as sintering aid
To soften the extreme sintering conditions of Tungsten Carbide (WC), a 3 wt.% of metallic nickel (Ni) was added to the starting powders. To ensure a fair distribution of the second phase and an intimate mixture of the phases, the colloidal process was adopted. A commercial Ni and a in-house synthesised nanosized nickel were used as sintering aids. Rheological studies allowed a high dispersion of the nickel in the final composite powders. Sintering studies by Hot-Pressing route (HP) proved the great benefices of Ni as a sintering aid, decreasing the maximum temperature necessary to achieve full densification, from 1900 to 1450 °C and dwell times from 20 to 7 min. Among all the materials obtained, the best results in terms of density, microstructure and properties were obtained for WC-nNi, which achieved hardness of 14.8 GPa and toughness comparable to conventional cermets with much higher content of metallic phase., This work has been supported by the Spanish Government under contracts PID2019-106631GB-C42 and C44 (MICINN/FEDER, UE) and Madrid Regional Government under contract P2018/NMT-4411 (Comunidad de Madrid/FEDER, UE). Mrs. García-Ayala thanks MINECO/FEDER, UE by grant BES-2016-079038 and JECS Trust for a mobility grant (ref: 2018170) for three months to ISTEC. Authors thank A. Sangiorgi for advice and support running the HP cycles.
Proyecto:
AEI / Plan Estatal de Investigación Científica y Técnica y de Innovación 2017-2020 PID2019-106631GB-C44
,
AEI / Plan Estatal de Investigación Científica y Técnica y de Innovación 2017-2020 PID2019-106631GB-C42
,
MINECO / Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016 BES-2016-079038