Pasar al contenido principal

RIESGOS EMERGENTES EN CALIDAD DE AMBIENTE INTERIOR: HACIA EDIFICIOS MAS SALUDABLES

PID2019-111063RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tribochemically driven dehydrogenation of undoped sodium alanate under room temperature

  • Muñoz-Cortés, Esmeralda
  • Ibryaeva, Olga
  • Manso Silván, Miguel
  • Zabala, Borja
  • Flores, Eduardo
  • Gutiérrez, Almudena
  • Ares, José R.
  • Nevshupa, Roman
n application of mechanical energy was explored as a new non-thermal method to drive H2 emission from undoped sodium alanate at room temperature. It was found that mild rubbing of NaAlH4 pellets under vacuum led to intensive and almost instantaneous gas emission. The dominating species in the emitted gases was H2 (>99%). Traces of mono- and polyalanes, NaAlH4 vapours, CO2 and other non-identified gases were registered. H2 emission involved several first-order processes, whose characteristic time constants ranged widely from 0.6 to 465 s. None of the dehydrogenation reactions could be connected to either the thermal effect of friction or the direct coupling of mechanical forces to the energy landscape of chemical reactions. In turn, it was suggested that the tribochemical reactions can be triggered by plastic deformation and shearing. A linked diffusion-wear model of NaAlH4 triboinduced dehydrogenation, which consistently explains all empirical findings, was put forward., This work was financially supported by the Ministry of Science and Innovation of Spain (grants PID2019-111063RB-I00, PID2020-112770RB-C22 and RTI2018-099794-B-I00) and the Basque Government via the EMAITEK Plus 2020 programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effects of Mott–Schottky Frequency Selection and Other Controlling Factors on Flat-Band Potential and Band-Edge Position Determination of TiO2

  • Lee, Siaw Foon
  • Jiménez-Relinque, Eva
  • Martínez Sierra, Isabel
  • Castellote, Marta
The use of titanium dioxide for tackling environmental pollution has attracted great research interest recently. The potential of a photocatalyst in removing contaminants depends mainly on its conduction and valence-band edges relative to the standard potential of reactive oxygen species. One of the methods used in determining these band-edge positions is via the Mott–Schottky analysis. Thus, the aim of this work was to investigate the influence of the Mott–Schottky frequency and different electrochemical conditions on flat-band potential values and band-edge positions of pure anatase or Degussa P25, calcined or uncalcined in a 0.2 M Na2SO4 solution. The results showed that the shift in the flat-band potential was not so frequency-dependent in the Mott–Schottky analysis, however, other reasons, such as immersion duration leading to thenardite Na2SO4 salt deposition on the surface, irradiation of sources and the change in the pH of the solution (in the range of 1.64–12.11) were also responsible for it. In general, both the calcined anatase and P25 had a less negative value of the flat-band potential compared to the uncalcined. On the other hand, the calcined anatase had a tendency to have a less negative value of the flat-band potential than the calcined P25. From this study, the frequency range for obtaining the flat-band potential within one standard deviation in the Mott–Schottky at a single-frequency analysis was found to be between 200 and 2000 Hz. The energy difference between the Fermi level and the conduction band edge for anatase and P25, either calcined or uncalcined, was 0.097–0.186 and 0.084–0.192 eV, respectively. On the other hand, the band-edge position of anatase or P25 tended to shift upwards when it was repeatedly used in the photoelectrochemical analysis., The research was funded by the project of ERIQ with Ref: PID2019-111063RB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Operando exploration of tribochemical decomposition of FeS2 thin films and mineral iron pyrite

  • Muñoz-Cortés, Esmeralda
  • Sánchez-Prieto, Jesús
  • Zabala, Borja
  • Sánchez, Carlos
  • Flores, Eduardo
  • Flores, Araceli
  • Román García, Elisa Leonor
  • Ares, José R.
  • Nevshupa, Roman
Tribochemical decomposition of thin-film synthetic iron disulfide and mineral iron pyrite was studied using a combination of operando mass-spectrometry coupled to ultrahigh vacuum tribochemical cell and these gas expansion system. The composition and kinetics of gas emission were analyzed using an original methodology. It was found that carbon-containing gases were dominating. The sulfur-containing gases comprised H2S, COS and CS2. The latter two were unexpected. The emission of the gases was traced back to solid-state chemical reactions kinetically controlled by the precursor concentrations and driven through non-thermal mechanisms, which we tentatively assigned to formation of sulfur radicals., This work was supported by the Ministry of Science, Innovation and University of Spain (grants PID2019- 111063RB-I00, PID2020-112770RB-C22, PID2020-117573GB-I00, RTI2018-099794-B-I00, and TED2021-129950B-I00). We acknowledge the service from the MiNa Laboratory at IMN and funding from Madrid Community (project S2018/NMT-4291 TEC2SPACE), Ministry of Science, Innovation and Universities of Spain (project CSIC13-4E-1794), and EU (FEDER, FSE) The authors acknowledge the support from The Centre for Micro Analysis of Materials (CMAM)—Universidad Autónoma de Madrid, for the beam time proposal (Analysis of surface elemental transformations induced by mechanochemical reactions with metal sulfides) with code STD-022/23, and its technical staff for their contribution to the operation of the accelerator., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Quantitative study of triboemission kinetics from polymer fiber-reinforced mortar paving blocks: Unravelling the dynamics of nanoparticle aerosol release

  • Husanu, Francisca
  • Alonso, Álvaro
  • Calderón, Verónica
  • Castellote, Marta
  • Nevshupa, Roman
Triboemission of nanoparticle aerosols from construction materials is a growing concern due to its potential impact on air quality and human health. In this study, we investigated the effect of aggregation of polyurethane fibers (PUFs) proceeding from waste on the kinetics of triboemission in cement mortars. A quantitative methodology was employed to assess the deposition rate, particle size distribution, and emissivity for the aerosols within the particle aerodynamic diameter range of 10–400 nm. The triboemission properties were correlated with the pore structure, morphology and tribochemical transformations of the particles and worn surfaces. Our results highlight the intricate influence of PUF aggregation on the kinetics of triboemission in cement mortars through both direct and indirect mechanisms and provide valuable insights into the mechanisms governing triboemission in construction materials., The work was funded by the Ministry of Science and Innovation of Spain with the contribution from the European Regional Development Fund and the European Union NextGenerationEU / PRTR through the contracts PID2019-111063RB-I00, TED2021-129950B-I00, PRE2020-092472 and PDC2022-134014-I00. Also, the support was provided by the Regional Government of Castilla y León (BU070P20)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Non-trivial role of surrounding gases in triboluminescence: A comprehensive review

  • Tukhbatullin, Adis A.
  • Sharipov, Glyus L.
  • Nevshupa, Roman
During the preparation of this work, the authors used Gemini via Google to improve language and readability. After using this service, the authors reviewed and edited the content as needed and took full responsibility for the content of the publication. The authors also used the Promeai service to generate a portion of the graphical abstract., Research on triboluminescence phenomena has been comprehensively reviewed, with a focus on the activation mechanisms resulting from the dissipation of mechanical energy at interfaces. The complexity and interdisciplinary nature of this phenomenon, along with its dependence on gas composition and pressure, have been analyzed. Special attention was given to air, inert gases, polyatomic gases, and hydrocarbon gases. The influence of gas composition on triboluminescence is not straightforward. This is because at least three components are associated with different physical and chemical processes and activation mechanisms. These components include triboluminescence (TL)1: gas discharge luminescence. This occurs because of the generation of an electric field and dielectric breakdown of gases surrounding the mechanically activated zone of the material; TL2: photoluminescence of mechanically activated material. This results from the excitation of luminescent centers by the absorption of ultraviolet radiation from the gas discharge; TL3: material luminescence not related to photoluminescence. This is the least studied and most complex component. This can be related to the direct coupling of the mechanical force with the energy landscape of defects, impurities, and other centers. These centers can be excited and emit light during deexcitation. Other possibilities include luminescence excited by electric fields, exoelectron emission, etc. Therefore, the gas environment is crucial not only for gas discharge (as various gases can promote or quench it) but also for controlling other excitation and deexcitation processes. These processes occur through interactions of adsorbed films with stressed materials, tribochemical reactions, photochemical reactions, and so on. Furthermore, the potential application of triboluminescence for sensing gas composition is highlighted., The authors acknowledge the use of equipment by the Agidel Collective Use Centre at the Institute of Petrochemistry and Catalysis UFRC RAS and the financial support received from the Russian Science Foundation (Grant 23-12-20002) and the Ministry of Science, Innovation and Universities of Spain (Grants PID2019-111063RB-I00 and TED2021-129950B-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring tribochemical transduction pathways for dehydrogenation of molecular hydrides

  • Muñoz-Cortés, Esmeralda
  • Leardini, Fabrice
  • Conte, Marcello
  • Flores, Eduardo
  • Nevshupa, Roman
  • Ares, Jose Ramón
  • Campo, Ángel Adolfo del
Recent research has shown that mechanical energy can trigger dehydrogenation (hydrogen release) from metal and complex hydrides at room temperature, offering an alternative to traditional heat-based methods. This study investigates whether the tribochemical approach can also be effective to release hydrogen from molecular hydrides such as ethane 1,2-diamineborane (EDAB). Surprisingly, despite dehydrogenating at a lower temperature than metal and complex hydrides, EDAB exhibited faint hydrogen release under mechanical stress. To understand this behavior, the tribochemical decomposition pathways of EDAB were investigated using operando Mechanically Stimulated Gas Emission Mass Spectrometry in combination with other surface and material characterization techniques. The lack of hydrogen emission from EDAB is attributed to a combination of strong intramolecular bonds (covalent and dative bonds) within the molecule, and weak intermolecular interactions (hydrogen bonds and van der Waals forces) between EDAB molecules., Authors thank to J. F. Fern\u00E1ndez and M. Manso Silvan from UAM for valuable discussion. The technical assistance of S. Guerra is also acknowledged. This work was supported by the Ministry of Science and Innovation of Spain (grants PID2019-111063RB-I00, PID2020-112770RB-C22, PID2020-117573GB-I00, RTI2018-099794-B-I00, and TED2021-129950B-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Emission of fine and ultrafine nanoparticle aerosols from composites functionalized with Multi-Wall Carbon Nano Tubes (MWCNTs) subjected to sliding wear: the influence of matrix material

  • Husanu, Francisca
  • Vélez Molina, Juan Camilo
  • Carlos Cornelio, Jesús Antonio
  • Santa Marín, Juan Felipe
  • Toro, Alejandro
  • Castellote, Marta
  • Nevshupa, Roman
While multi-wall carbon nanotube (MWCNT)-reinforced nanocomposites offer improved wear resistance, the health implications of released nanoparticle aerosols are a concern. This research aimed to understand the influence of matrix material on the tribological properties, microstructure, and triboemission of MWCNT-functionalized polymer and cement composites. Key findings reveal that aerosol emission cannot be predicted solely based on porosity and mechanical properties. The observed variations in MWCNT effects across different matrix materials are attributed to the distinct dominant wear mechanisms in each., This work was supported by Spanish National Research Council (Nos. COOPB20363, COOPA20495, and COOPB24043), Ministry of Science, Innovation and Universities of Spain (Nos. PID2019-111063RB-I00 and TED2021-129950B-I00) and the National Council of Science and Technology of Mexico - CONACYT (No. 740521). The authors acknowledge the FESEM service from the MiNa Laboratory at IMN funded by Madrid’s Community Government (No. S2013/ICE2822), Ministry of Science, Innovation and Universities of Spain (No. CSIC13-4E-1794) and EU (FEDER, FSE)., Peer reviewed