Pasar al contenido principal

ENSAYOS HIL DE PANTOGRAFOS CON MODELOS AVANZADOS DE CATENARIAS VIRTUALES

PID2020-113458RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Railway catenary optimisation with span variability by an iterative optimisation algorithm for large numbers of parameters

  • Gil-Romero, Jaime|||0000-0001-5597-5938
  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
  • Song, Y.
  • Rønnquist, A.
[EN] Optimising the catenary topology to improve the pantograph-catenary interaction is computationally expensive. Especially in the case of large numbers of parameters. Unfortunately, varying span lengths and dropper distribution in realistic systems requires the inclusion of a vast number of parameters, making the optimisation problem extremely complicated. Published optimisation works assume that the catenary is a perfectly periodical structure to reduce the number of parameters involved in the optimisation and keep the computational cost below a feasible limit. This paper attempts to deal with the scientific challenge of optimising a realistic system by proposing an iterative optimisation strategy consisting of optimising groups of parameters separately and repeating the optimisations iteratively to consider the dependence between parameters that otherwise would need to be optimised together. This solution performs topological catenary optimisation in catenary zones with span variability or transition zones in which optimisations that assume periodicity are no longer valid., The authors would like to acknowledge the financial support received from the State Research Agency of the Spanish Science and Innovation Ministry, Spain (PID2020-113458RB-I00) and from the Valencian Regional Government, Spain (PROMETEO/2021/046).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hardware-in-the-Loop Test Bench for Simulation of Catenary¿Pantograph Interaction (CPI) with Linear Camera Measurement

  • Correcher Salvador, Antonio|||0000-0002-2443-9857
  • Ricolfe Viala, Carlos|||0000-0002-2980-4569
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Salvador-Muñoz, Mario|||0000-0002-6087-6528
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
  • Gil-Romero, Jaime|||0000-0001-5597-5938
  • Pedrosa, Ana M.|||0000-0001-8069-5620
[EN] Catenary-pantograph contact force is generally used for assessment of the current collection quality. A good current collection quality not only increases catenary lifetime but also keeps a stable electric supply and helps to avoid accidents. Low contact forces lead to electric arcs that degrade the catenary, and high contact forces generate excessive wear on the sliding surfaces. Railway track operators require track tests to ensure that catenary-pantograph force remains between safe values. However, a direct measure of the contact force requires an instrumented pantograph which is generally costly and complicated. This paper presents a test bench that allows testing virtual catenaries over real pantographs. Therefore, the contact point force behavior can be tested before the track test to guarantee that the test is passed. Moreover, due to its flexibility, the system can be used for model identification and validation, catenary testing, or contact loss simulation. The test bench also explores using computer vision as an additional sensor for each application. Results show that the system has high precision and flexibility in the available tests., This research was funded by grants PID2020-113458RB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and PROMETEO/2021/046 by GVA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hardware-in-the-loop simulations of a railway pantograph with a finite element periodic catenary model

  • Gil-Romero, Jaime|||0000-0001-5597-5938
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Correcher Salvador, Antonio|||0000-0002-2443-9857
  • Pedrosa, Ana M.|||0000-0001-8069-5620
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] The pantograph-catenary dynamic interaction problem is addressed by Hardware-in-the-Loop (HIL) tests to simulate the dynamic interaction between a numerical model (the catenary) and a physical device (the pantograph). The real-time simulation requires a computationally efficient numerical model and an on time and accurate transference of the response to the pantograph, for which a Periodic Finite Element Model (PFEM) of the catenary is considered. Firstly because of the acceptable computation time required to solve it, makes it suitable for real-time simulations and, secondly, its ability to allow for the delay caused by the transfer of the numerical model response. The catenary PFEM we used considers the non-linear behaviour of the dropper slackening, leading to highly accurate HIL test results, which were validated up to a frequency of 25 Hz., The authors would like to acknowledge the financial support received from the Generalitat Valenciana (PROMETEO/2021/046) and (PID2020-113458RB-I00) funded by MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cantilever modelling in the railway catenary shape-finding problem

  • Aldaz-Saca, Nelson Hernán
  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Gil-Romero, Jaime|||0000-0001-5597-5938
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] Catenary designers need accurate numerical simulation tools to improve the system performance, increase operational speed, minimize wear and prevent arcing. To obtain reliable results, the catenary numerical model must avoid over-simplifying the hypotheses, which significantly affect the outcome, even if this involves increasing the model¿s complexity and computational cost. While the cantilevers that support the catenary wires are frequently omitted or over-simplified in many published studies, we incorporate the cantilevers into the catenary model to examine their impact on the static and dynamic behaviour of the catenary, and to develop a shape-finding procedure to include the cantilevers by a substructuring approach. For this we compared three scenarios: (i) a conventional catenary model without cantilevers, plus two other more realistic models that include the cantilevers: (ii) considering cantilever deformation in the geometric design, and (iii) disregarding cantilever deformation in the geometric design. The findings suggest that including the cantilevers reduces the stiffness of the system and produces a similar contact force. Although the two cantilever design options analysed result in slightly different initial catenary configurations, they also yield a very similar contact force. These findings therefore validate using simplified supports, provided they are appropriately calibrated, for which the proposed comprehensive cantilever model can be applied., The authors wish to thank the financial support received from Generalitat Valenciana (PROMETEO/2021/046) , and the project (PID2020-113458RB-I00) funded by MICIU/AEI/10.13039/501100011033. The useful information provided by Jose Antonio Fernandez Lopez is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hardware-in-the-Loop pantograph tests with general overhead contact line geometry

  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Correcher Salvador, Antonio|||0000-0002-2443-9857
  • Gil-Romero, Jaime|||0000-0001-5597-5938
  • Pedrosa, Ana M.|||0000-0001-8069-5620
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] Hardware-in-the-loop testing serves as a method to examine the dynamic interaction between the pantograph and catenary within controlled laboratory environments. This task involves measuring the force from the pantograph, using a real-time catenary model to determine the next pantograph position, and generating the desired pantograph movement to complete the loop. To address potential instability issues arising from communication delays and the inherent stiffness in the interaction with pantograph strips, a mass¿spring system and a Linear Quadratic Gaussian controller are integrated into the system. The catenary is a finite element model of a complete section, incorporating the non-linearity introduced by dropper slackening. Validation of the results demonstrates a good level of accuracy in the HiL test approach within the frequency range of 0¿20 Hz., The authors wish to express their gratitude for the financial support received from Grant PID2020-113458RB-I00 funded by MCIN/AEI/10.13039/501100011033 and Valencian Regional Government (PROMETEO/2021/046) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Finite element periodic catenary model to perform HIL pantograph tests considering non-linear dropper behaviour

  • Gil-Romero, Jaime|||0000-0001-5597-5938
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Gregori Verdú, Santiago|||0000-0002-0483-3531
  • Correcher Salvador, Antonio|||0000-0002-2443-9857
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] In this paper, we propose a general approach to compute the dynamic response of periodic infinite structures subjected to a moving load. The method only considers one repetitive block of the structure which is modelled by the Finite Element Method. The problem is first shifted to the frequency domain where the periodicity condition is easily applied and then the temporal response is obtained. An infinite periodic catenary system has been chosen to illustrate the proposed formulation. The linear formulation is extended to include the non-linear behaviour of droppers. The efficiency and accuracy of the catenary model obtained makes it very suitable for use in Hardware in the Loop (HIL) pantograph tests. We propose to combine this catenary model with an iterative strategy to achieve the steady-state response of the coupled system and its performance is analysed in a virtual HIL simulation., The authors would like to acknowledge the financial support received from the State Research Agency of the Spanish Science and Innovation Ministry (PID2020-113458RB-I00) and from the Valencian Regional Government (PROMETEO/2021/046).