Pasar al contenido principal

USO DE TECNOLOGIAS ULTRASONICAS Y DE CAMPOS ELECTRICOS PARA LA OBTENCION DE AISLADOS PROTEICOS DE ALTRAMUZ Y SU EXTRUSION PARA EL DESARROLLO DE ANALOGOS CARNICOS SALUDABLES

PID2020-114422RR-C53

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Moderate electric field-assisted alkaline solubilization of lupin protein

  • Navarro-Vozmediano, Paola|||0000-0003-1909-6121
  • Benedito Fort, José Javier|||0000-0003-0163-4593
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
  • Bou, Ricard
  • Ribas-Agustí, Albert
[EN] The nutritional quality of lupin is often limited by the presence of anti-nutritional factors (ANF), such as saponins and alkaloids, as well as anti-technological factors (ATF), including fat and polyphenols. This study evaluated the use of moderate electric field (MEF) during the protein solubilization stage as a strategy to reduce ANF and ATF and improve protein yield and the techno-functional properties of lupin protein isolate (LPI). Thus, 4 different treatments were applied during the alkaline solubilization for protein isolation purposes: (i) conventional (25 degrees C, 90 min), (ii) high temperature (60 degrees C, 45 min), (iii) MEF (60 degrees C, 45 min, 1200 Hz) with ON-OFF (25 V/cm) and (iv) Proportional control (up to 25 V/cm, avg 3.7 V/cm) algorithms to prevent overheating. Overall, MEF application led to a highly effective decrease in the ANF and ATF of LPI. Compared to high temperature isolation, MEF significantly lowered saponin content (1.93 g oleanolic acid/hg dm) and polyphenols (0.66 mg gallic acid/g dm). Additionally, techno-functional traits, such as water and oil absorption and foaming and emulsifying properties, were also enhanced. A prolonged voltage supply at low electric field under MEF proportional control effectively prevented overheating during protein solubilization and led to improved LPI properties when compared with ON-OFF control., This work was supported by the Grant PID2020-114422RR-C53 funded by MICIU/AEI/10.13039/501100011033. Paola Navarro-Vozmediano acknowledges the FPU PhD contract (FPU19/03497) granted by the Spanish "Ministerio de Educacion y Formacion Profesional". Funding for open access charge: Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of Seed Germination on the Physicochemical Properties of Lupin Flours and the Physicochemical and Techno-functional Properties of Their Protein Isolates

  • Navarro-Vozmediano, Paola|||0000-0003-1909-6121
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
  • Benedito Fort, José Javier|||0000-0003-0163-4593
  • Bou, Ricard
  • Dalmau, Esperanza
[EN] Nowadays , lupin seeds have emerged as a novel and valuable source of proteins representing a sustainable alternative to current raw materials of plant-based proteins, such as soybean. In this regard, lupin demonstrates superior adaptation to the Mediterranean climate with improved tolerance to water stress. However, its suitability for human consumption is limited due to the presence of anti-nutritional and anti-technological factors, including alkaloids, polyphenols, tannins, and lipids, which can have adverse nutritional consequences and/or impact on the purity and yield of protein extraction. In this study, the Lupinus luteus seeds were germinated for 1, 2, 3, and 6 days and the effect of germination on the anti-nutritional and anti-technological factors of flours and derived protein isolates was analyzed. Additionally, changes on techno-functional properties of lupin protein isolates were also studied. Results showed that prolonged germination decreased fat content whereas antioxidant activity, polyphenols, saponin, and alkaloid content of flours increased. However, alkaloids were completely removed during protein extraction. Furthermore, protein isolates derived from germinated seeds exhibited higher water and oil absorption capacities, as well as improved foaming and emulsifying capabilities in comparison to isolates from non-germinated seeds. Nevertheless, prolonged germination periods were associated with diminished foam and emulsion stability. Therefore, germination of lupin seeds for no longer than 3 days should be recommended in order to minimize the levels of anti-nutritional and anti-technological factors, while enhancing techno-functional properties of the isolate., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work was supported by the project LUPIPROTECH (Project PID2020-114422RR-C53) funded by the Spanish "Ministerio de Ciencia, Innovacion y Universidades" and "Agencia Estatal de Investigacion" (MCIN/AEI/https://doi.org/10.13039/501100011033). Paola Navarro-Vozmediano acknowl-edges the FPU PhD contract (FPU19/03497) granted by the Spanish "Ministerio de Educacion y Formacion Profesional." Esperanza Dalmau acknowledges the "Margarita Salas" postdoctoral contract, which is funded by the Spanish "Ministerio de Ciencia, Innovacion y Universidades," within the framework of the Recovery, Transformation and Resilience Plan, and financed by the European Union (NextGenerationEU), with the participation of the University of the Balearic Islands. DAS:Data is provided within the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Lupin-based high-protein extrudates: Physicochemical, nutritional and techno-functional properties

  • Navarro-Vozmediano, Paola|||0000-0003-1909-6121
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
  • Quiles Chuliá, Mª Desamparados|||0000-0003-4991-6629
  • Benedito Fort, José Javier|||0000-0003-0163-4593
  • Bou, Ricard
  • Jorba-Martín, Rosa
[EN] Lupin is an underutilized legume with high protein content (30-40 %) and strong potential for sustainable cultivation, but its use in the food industry is limited by the presence of anti-nutritional (saponins, alkaloids, polyphenols) and anti-technological factors, as well as suboptimal techno-functional properties. Low-moisture extrusion (LME) offers a promising strategy to overcome these limitations while producing high-protein texturized ingredients. In this study, five formulations combining lupin flour with laboratory or commercial lupin protein isolates were subjected to LME to evaluate effects on anti-nutritional compounds, techno-functional properties, and textural attributes. Extrusion reduced polyphenols (avg. 42 %), antioxidant activity (avg. 17 %) and saponins (avg. 47 %), while alkaloids remained stable. Water and fat absorption capacities were largely maintained (avg. 1.26 g water/g dm and 1.66 g oil/g dm, respectively), compared to powder formulations (avg. 1.31 g water/g dm and 2.25 g oil/g dm, respectively). Microstructural observations, along with bulk density (avg. 1.09 g/cm3) and texture analysis (average hardness of 346 N) confirmed the formation of compact highprotein extrudates (up to 88.6 % protein) and showed the effects of protein incorporation on matrix organization and textural properties, supporting their suitability as functional ingredients. Overall, this work demonstrates that LME can enhance the properties of lupin flour and isolates, producing high-protein extrudates with improved nutritional, functional, and structural qualities., This work was supported by the Grant PID2020-114422RR-C53 funded by MICIU/AEI/10.13039/501100011033. Paola Navarro-Vozmediano acknowledges the FPU PhD contract (FPU19/03497) granted by the Spanish "Ministerio de Educacion y Formacion Profesional". The authors wish to thank Juan Vicente Lopez Baldo from the Food Technology Department at Universitat Politecnica de Valencia for his technical support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of Supercritical CO2 Treatment on Lupin Flour and Lupin Protein Isolates

  • Domínguez-Valencia, Rubén
  • Bermúdez, Roberto
  • Pateiro, Miriam
  • Purriños, Laura
  • Lorenzo, José M.
  • Benedito Fort, José Javier|||0000-0003-0163-4593
[EN] Global population growth is putting pressure on the food supply, necessitating the exploration of new, alternative, and sustainable protein sources. Lupin, an underutilized legume in human nutrition, has the potential to play a significant role in addressing this challenge. However, its incorporation into the human diet requires thorough investigation, including exploring and optimizing functionalization processes to maximize its potential. This study aimed to optimize the parameters (pressure, time, and CO2 flow) for extracting anti-technological factors (ATFs) from lupin using supercritical CO2 (SC-CO2) and to evaluate the effects of this extraction on both the flour and the protein isolate derived from it. Optimization revealed that the optimal SC-CO2 conditions were a CO2 flow rate of 4 kg/h at 400 bar for 93 min. Under these conditions, significant changes were observed in the flour composition, including a reduction in oil, polyphenols, and moisture content, along with an increase in ash content. Improved color parameters were also noted. These variations were attributed to the removal of oil and phenolic compounds during processing. Furthermore, this research demonstrated that SC-CO2 treatment improved lupin protein isolate (LPI) purity (93.81 +/- 0.31% vs. 87.42 +/- 0.48%), significantly reduced oil content (8.31 +/- 0.09% vs. 14.31 +/- 0.32%), and enhanced color parameters. The SC-CO2 procedure also resulted in a higher protein extraction yield (56.95 +/- 0.45% vs. 53.29 +/- 2.37%). However, the total extraction yield (g LPI/100 g of flour) was not affected by SC-CO2 treatment, remaining at 24.30 +/- 0.97% for the control sample and 24.21 +/- 0.26% for the treated sample. The extracted oil (2.71 +/- 0.11 g/100 g of flour), a co-product of the SC-CO2 step, exhibited a fatty acid profile characterized by high levels of unsaturated fatty acids (62.8 +/- 0.74 g/100 g oil), oleic acid (27.76 +/- 0.77 g/100 g oil), linoleic acid (25.98 +/- 0.73 g/100 g oil), and alpha-linolenic acid (5.32 +/- 0.16 g/100 g oil), as well as a balanced ratio of essential fatty acids (n-6/n-3 = 4.89). The treatment had minimal to no effect on amino acid content or chemical score, and the protein was characterized by high amounts of essential amino acids (334 +/- 3.12 and 328 +/- 1.05 mg/g protein in LPI-control and LPI-SF, respectively). These findings demonstrate that both the LPI and the oil extracted using SC-CO2 possess high nutritional quality and are suitable for human food applications., This work was supported by the project OPFLuPAn from the Spanish "Ministerio de Ciencia e Innovacion" and the "Agencia Estatal de Investigacion" (Grant number PID2020-114422RR-C54).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-power ultrasound pretreatment for enhanced protein extraction from lupin flour: Impact on yield, anti-technological and anti-nutritional factors, and techno-functional properties

  • Navarro-Vozmediano, Paola|||0000-0003-1909-6121
  • Benedito Fort, José Javier|||0000-0003-0163-4593
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
  • Dalmau-Estelrich, Maria Esperanza
[EN] Quality of lupin protein is considerably compromised by the presence of anti-nutritional (ANF), such as polyphenols, alkaloids and saponins and anti-technological factors (ATF), like polyphenols and fat. This work explores how high-power ultrasound-assisted (HPU) pretreatment of lupin flour (LF) before protein extraction could affect ANF and ATF content, as well as protein yield and techno-functional properties. LF pretreatments for 3 and 9 min, using water and ethanol¿water (1:4 v/v), were carried using conventional mechanical stirring (952 rpm) and HPU (sonotrode, 24 kHz) at 30 and 60 ¿C. Ultrasonic field was characterized by computing acoustic pressure from frequency spectra analysis. In general terms, pretreatment reduced noticeably ANF and ATF in both LF and protein isolate (LPI), while also producing a protein concentrate (LPC, avg. 65 g protein/100 g) with low ANF and ATF content. Total protein yield, adding LPC and LPI, was increased by 15 % due to the pretreatment, which also enhanced the technofunctional properties of LPI, such as water absorption index (avg. 26 %) and foaming (avg. 8 %) and emulsifying properties (avg. 14 %). But, the efficiency of the pretreatment was largely affected by process variables. In particular, HPU reduced fat (avg. 27 %), saponin (avg. 21 %) and phenolic content (avg. 17 %), as well as antioxidant activity (avg. 11 %). In addition, the highest protein yield was achieved by sonication using water at 30 ¿C. This may be explained by ultrasonic field measurements, which revealed higher acoustic pressure levels under these conditions., This work was supported by the Grant PID2020-114422RR-C53 funded by MICIU/AEI/ 10.13039/ 501100011033. Funding for open access charge: Universitat Politecnica de Valencia. Paola NavarroVozmediano acknowledges the FPU PhD contract (FPU19/03497) granted by the Spanish Ministerio de Educacion¿ y Formacion¿ Profesional . Esperanza Dalmau acknowledges the Margarita Salas postdoctoral contract, which is funded by the Spanish Ministry of Universities, within the framework of the Recovery, Transformation and Resilience Plan and financed by the European Union (NextGenerationEU), with the participation of the University of the Balearic Islands.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of moderate electric field pretreatment on protein extraction from lupin flour

  • Navarro-Vozmediano, Paola|||0000-0003-1909-6121
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
  • Benedito Fort, José Javier|||0000-0003-0163-4593
  • Domínguez-Valencia, Rubén
[EN] Lupin protein quality is notably affected by the presence of anti-nutritional factors (ANF) such as polyphenols, alkaloids and saponins, along with anti-technological factors (ATF) like polyphenols and fat. This research addresses the impact of moderate electric field-assisted (MEF) pretreatment on lupin flour (LF) prior to protein extraction by isoelectric precipitation, focusing on its effects on ANF and ATF content, protein yield and technofunctional properties. Pretreatments were carried out for 3 min using water and ethanol-water (1:4 v/v), under two conditions: (i) conventional mechanical stirring (952 rpm) and (ii) MEF (from 150 to 300 V) at 60 degrees C. Pretreatment decreased noticeably ANF and ATF content of both LF and lupin protein isolate (LPI). Furthermore, it yielded a lupin protein concentrate (LPC, avg. 62 g protein/100 g) with reduced levels of ANF and ATF. LF pretreatment increased the recovery of protein (avg. 12 %). Compared to conventional pretreatment, MEF application reduced fat (avg. 21 %), saponins (avg. 37 %), polyphenols (avg. 38 %) and antioxidant activity (avg. 8 %) and improved LPI's techno-functional properties, including water and fat absorption index (avg. 17 and 68 %, respectively), foaming (avg. 122 %) and emulsifying properties (avg. 10 %). The LPC fraction also exhibited promising characteristics, indicating its potential as a valuable ingredient in food formulations. These findings highlight the effectiveness of MEF pretreatments as a strategy for reducing ANF and ATF, enhancing protein extraction and overall quality., This work was supported by the Grant PID2020-114422RR-C53 funded by MICIU/AEI/10.13039/501100011033. Paola Navarro-Vozmediano acknowledges the FPU PhD contract (FPU19/03497) granted by the Spanish "Ministerio de Educacion y Formacion Profesional". Ruben Dominguez-Valencia is member of the AlProSos network (Network of Sustainable Regional Protein-Rich Foods), funded by CYTED (ref: 125RT0165) .
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Lupin-based high-protein extrudates: Physicochemical, nutritional and techno-functional properties

  • Navarro-Vozmediano, Paola
  • García-Pérez, José V.
  • Quiles, Amparo
  • Bou, Ricard
  • Jorba-Martín, Rosa
  • Benedito, José
Lupin is an underutilized legume with high protein content (30–40 %) and strong potential for sustainable cultivation, but its use in the food industry is limited by the presence of anti-nutritional (saponins, alkaloids, polyphenols) and anti-technological factors, as well as suboptimal techno-functional properties. Low-moisture extrusion (LME) offers a promising strategy to overcome these limitations while producing high-protein texturized ingredients. In this study, five formulations combining lupin flour with laboratory or commercial lupin protein isolates were subjected to LME to evaluate effects on anti-nutritional compounds, techno-functional properties, and textural attributes. Extrusion reduced polyphenols (avg. 42 %), antioxidant activity (avg. 17 %) and saponins (avg. 47 %), while alkaloids remained stable. Water and fat absorption capacities were largely maintained (avg. 1.26 g water/g dm and 1.66 g oil/g dm, respectively), compared to powder formulations (avg. 1.31 g water/g dm and 2.25 g oil/g dm, respectively). Microstructural observations, along with bulk density (avg. 1.09 g/cm³) and texture analysis (average hardness of 346 N) confirmed the formation of compact high-protein extrudates (up to 88.6 % protein) and showed the effects of protein incorporation on matrix organization and textural properties, supporting their suitability as functional ingredients. Overall, this work demonstrates that LME can enhance the properties of lupin flour and isolates, producing high-protein extrudates with improved nutritional, functional, and structural qualities., This work was supported by the Grant PID2020-114422RR-C53 funded by MICIU/AEI/ 10.13039/ 501100011033. Paola Navarro-Vozmediano acknowledges the FPU PhD contract (FPU19/03497) granted by the Spanish “Ministerio de Educación y Formación Profesional”. The authors wish to thank Juan Vicente López Baldó from the Food Technology Department at Universitat Politècnica de València for his technical support., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Enhancing lupin protein isolation: Modulation of extraction parameters to maximize protein and phytochemical recovery, and phytase treatment for improved functionality

  • Taberner-Pibernat, Pau
  • Bou, Ricard
  • Castellari, Massimo
  • Benedito, José J.
  • García-Perez, José V.
  • Trigka, Christina
  • Ribas-Agustí, Albert
The growing demand for plant-based proteins has positioned lupin (Lupinus spp.) as a promising alternative to soy. However, bioactive phytochemicals in lupin seeds —although offering valorisation potential— pose challenges due to their antinutritional effects and impact on protein functionality. This study investigated how ethanol concentration (EtOH), solvent-to-solute ratio (SSR), and fast heat treatment (HT) using a microwave oven influence the mass yield and composition of lupin protein isolate (LPI), as well as the recovery of phytochemicals in the extraction solvent (ES), using response surface methodology (RSM). Analysis of variance revealed that EtOH and SSR were the most significant factors. The maximum LPI yield was obtained at 11 % EtOH and a 23:1 SSR. Increasing EtOH up to 23 % increased protein content but caused a linear decrease in phytic acid and total phenolic content (TPC) and a linear increase in saponins in LPI, with opposite trends observed in the ES. Increasing SSR reduced LPI protein and phytochemical contents, except for phytic acid, which increased. Conversely, alkaloids, saponins and TPC generally increased with higher SSR in the ES. The addition of phytase during extraction significantly reduced phytic acid levels, improved LPI solubility, and the stability of its emulsifying and foaming properties. However, phytase treatment slightly reduced protein yield and LPI protein content, with changes being statistically significant but of limited practical relevance. These findings demonstrate the importance of tailoring extraction strategies to balance protein yield, content, and phytochemical management, enabling the production of LPI ingredients while facilitating the valorisation of phytochemical-rich side streams., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Impact of seed germination on the physicochemical properties of lupin flours and the physicochemical and techno-functional properties of their protein isolates

  • Navarro-Vozmediano, Paola
  • BOU, RICARD
  • García-Pérez, José V.
  • Dalmau, Esperanza
  • Benedito, José J.
Nowadays , lupin seeds have emerged as a novel and valuable source of proteins representing a sustainable alternative to current raw materials of plant-based proteins, such as soybean. In this regard, lupin demonstrates superior adaptation to the Mediterranean climate with improved tolerance to water stress. However, its suitability for human consumption is limited due to the presence of anti-nutritional and anti-technological factors, including alkaloids, polyphenols, tannins, and lipids, which can have adverse nutritional consequences and/or impact on the purity and yield of protein extraction. In this study, the Lupinus luteus seeds were germinated for 1, 2, 3, and 6 days and the effect of germination on the anti-nutritional and anti-technological factors of flours and derived protein isolates was analyzed. Additionally, changes on techno-functional properties of lupin protein isolates were also studied. Results showed that prolonged germination decreased fat content whereas antioxidant activity, polyphenols, saponin, and alkaloid content of flours increased. However, alkaloids were completely removed during protein extraction. Furthermore, protein isolates derived from germinated seeds exhibited higher water and oil absorption capacities, as well as improved foaming and emulsifying capabilities in comparison to isolates from non-germinated seeds. Nevertheless, prolonged germination periods were associated with diminished foam and emulsion stability. Therefore, germination of lupin seeds for no longer than 3 days should be recommended in order to minimize the levels of anti-nutritional and anti-technological factors, while enhancing techno-functional properties of the isolate., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work was supported by the project LUPIPROTECH (Project PID2020-114422RR-C53) funded by the Spanish “Ministerio de Ciencia, Innovación y Universidades” and “Agencia Estatal de Investigación” (MCIN/AEI/https://doi.org/10.13039/501100011033). Paola Navarro-Vozmediano acknowledges the FPU PhD contract (FPU19/03497) granted by the Spanish “Ministerio de Educación y Formación Profesional.” Esperanza Dalmau acknowledges the “Margarita Salas” postdoctoral contract, which is funded by the Spanish “Ministerio de Ciencia, Innovación y Universidades,” within the framework of the Recovery, Transformation and Resilience Plan, and financed by the European Union (NextGenerationEU), with the participation of the University of the Balearic Islands., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Moderate electric field-assisted alkaline solubilization of lupin protein

  • Navarro-Vozmediano, Paola
  • Benedito, Jose
  • Bou, Ricard
  • Ribas-Agustí, Albert
  • Garcia-Perez, Jose V.
The nutritional quality of lupin is often limited by the presence of anti-nutritional factors (ANF), such as saponins and alkaloids, as well as anti-technological factors (ATF), including fat and polyphenols. This study evaluated the use of moderate electric field (MEF) during the protein solubilization stage as a strategy to reduce ANF and ATF and improve protein yield and the techno-functional properties of lupin protein isolate (LPI). Thus, 4 different treatments were applied during the alkaline solubilization for protein isolation purposes: (i) conventional (25 °C, 90 min), (ii) high temperature (60 °C, 45 min), (iii) MEF (60 °C, 45 min, 1200 Hz) with ON-OFF (25 V/cm) and (iv) Proportional control (up to 25 V/cm, avg 3.7 V/cm) algorithms to prevent overheating. Overall, MEF application led to a highly effective decrease in the ANF and ATF of LPI. Compared to high temperature isolation, MEF significantly lowered saponin content (1.93 g oleanolic acid/hg dm) and polyphenols (0.66 mg gallic acid/g dm). Additionally, techno-functional traits, such as water and oil absorption and foaming and emulsifying properties, were also enhanced. A prolonged voltage supply at low electric field under MEF proportional control effectively prevented overheating during protein solubilization and led to improved LPI properties when compared with ON-OFF control., This work was supported by the Grant PID2020-114422RR-C53 funded by MICIU/AEI/10.13039/501100011033. Paola Navarro-Vozmediano acknowledges the FPU PhD contract (FPU19/03497) granted by the Spanish “Ministerio de Educación y Formación Profesional”. Funding for open access charge: Universitat Politècnica de València., info:eu-repo/semantics/publishedVersion
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Enhancing lupin protein isolation: Modulation of extraction parameters to maximize protein and phytochemical recovery, and phytase treatment for improved functionality

  • Taberner-Pibernat, Pau
  • Bou, Ricard
  • Castellari, Massimo
  • Benedito, José J.
  • García-Perez, José V.
  • Trigka, Christina
  • Ribas-Agustí, Albert
The growing demand for plant-based proteins has positioned lupin (Lupinus spp.) as a promising alternative to soy. However, bioactive phytochemicals in lupin seeds —although offering valorisation potential— pose challenges due to their antinutritional effects and impact on protein functionality. This study investigated how ethanol concentration (EtOH), solvent-to-solute ratio (SSR), and fast heat treatment (HT) using a microwave oven influence the mass yield and composition of lupin protein isolate (LPI), as well as the recovery of phytochemicals in the extraction solvent (ES), using response surface methodology (RSM). Analysis of variance revealed that EtOH and SSR were the most significant factors. The maximum LPI yield was obtained at 11 % EtOH and a 23:1 SSR. Increasing EtOH up to 23 % increased protein content but caused a linear decrease in phytic acid and total phenolic content (TPC) and a linear increase in saponins in LPI, with opposite trends observed in the ES. Increasing SSR reduced LPI protein and phytochemical contents, except for phytic acid, which increased. Conversely, alkaloids, saponins and TPC generally increased with higher SSR in the ES. The addition of phytase during extraction significantly reduced phytic acid levels, improved LPI solubility, and the stability of its emulsifying and foaming properties. However, phytase treatment slightly reduced protein yield and LPI protein content, with changes being statistically significant but of limited practical relevance. These findings demonstrate the importance of tailoring extraction strategies to balance protein yield, content, and phytochemical management, enabling the production of LPI ingredients while facilitating the valorisation of phytochemical-rich side streams., info:eu-repo/semantics/publishedVersion
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Impact of seed germination on the physicochemical properties of lupin flours and the physicochemical and techno-functional properties of their protein isolates

  • Navarro-Vozmediano, Paola
  • BOU, RICARD
  • García-Pérez, José V.
  • Dalmau, Esperanza
  • Benedito, José J.
Nowadays , lupin seeds have emerged as a novel and valuable source of proteins representing a sustainable alternative to current raw materials of plant-based proteins, such as soybean. In this regard, lupin demonstrates superior adaptation to the Mediterranean climate with improved tolerance to water stress. However, its suitability for human consumption is limited due to the presence of anti-nutritional and anti-technological factors, including alkaloids, polyphenols, tannins, and lipids, which can have adverse nutritional consequences and/or impact on the purity and yield of protein extraction. In this study, the Lupinus luteus seeds were germinated for 1, 2, 3, and 6 days and the effect of germination on the anti-nutritional and anti-technological factors of flours and derived protein isolates was analyzed. Additionally, changes on techno-functional properties of lupin protein isolates were also studied. Results showed that prolonged germination decreased fat content whereas antioxidant activity, polyphenols, saponin, and alkaloid content of flours increased. However, alkaloids were completely removed during protein extraction. Furthermore, protein isolates derived from germinated seeds exhibited higher water and oil absorption capacities, as well as improved foaming and emulsifying capabilities in comparison to isolates from non-germinated seeds. Nevertheless, prolonged germination periods were associated with diminished foam and emulsion stability. Therefore, germination of lupin seeds for no longer than 3 days should be recommended in order to minimize the levels of anti-nutritional and anti-technological factors, while enhancing techno-functional properties of the isolate., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work was supported by the project LUPIPROTECH (Project PID2020-114422RR-C53) funded by the Spanish “Ministerio de Ciencia, Innovación y Universidades” and “Agencia Estatal de Investigación” (MCIN/AEI/https://doi.org/10.13039/501100011033). Paola Navarro-Vozmediano acknowledges the FPU PhD contract (FPU19/03497) granted by the Spanish “Ministerio de Educación y Formación Profesional.” Esperanza Dalmau acknowledges the “Margarita Salas” postdoctoral contract, which is funded by the Spanish “Ministerio de Ciencia, Innovación y Universidades,” within the framework of the Recovery, Transformation and Resilience Plan, and financed by the European Union (NextGenerationEU), with the participation of the University of the Balearic Islands., info:eu-repo/semantics/publishedVersion
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Lupin-based high-protein extrudates: Physicochemical, nutritional and techno-functional properties

  • Navarro-Vozmediano, Paola
  • García-Pérez, José V.
  • Quiles, Amparo
  • Bou, Ricard
  • Jorba-Martín, Rosa
  • Benedito, José
Lupin is an underutilized legume with high protein content (30–40 %) and strong potential for sustainable cultivation, but its use in the food industry is limited by the presence of anti-nutritional (saponins, alkaloids, polyphenols) and anti-technological factors, as well as suboptimal techno-functional properties. Low-moisture extrusion (LME) offers a promising strategy to overcome these limitations while producing high-protein texturized ingredients. In this study, five formulations combining lupin flour with laboratory or commercial lupin protein isolates were subjected to LME to evaluate effects on anti-nutritional compounds, techno-functional properties, and textural attributes. Extrusion reduced polyphenols (avg. 42 %), antioxidant activity (avg. 17 %) and saponins (avg. 47 %), while alkaloids remained stable. Water and fat absorption capacities were largely maintained (avg. 1.26 g water/g dm and 1.66 g oil/g dm, respectively), compared to powder formulations (avg. 1.31 g water/g dm and 2.25 g oil/g dm, respectively). Microstructural observations, along with bulk density (avg. 1.09 g/cm³) and texture analysis (average hardness of 346 N) confirmed the formation of compact high-protein extrudates (up to 88.6 % protein) and showed the effects of protein incorporation on matrix organization and textural properties, supporting their suitability as functional ingredients. Overall, this work demonstrates that LME can enhance the properties of lupin flour and isolates, producing high-protein extrudates with improved nutritional, functional, and structural qualities., This work was supported by the Grant PID2020-114422RR-C53 funded by MICIU/AEI/ 10.13039/ 501100011033. Paola Navarro-Vozmediano acknowledges the FPU PhD contract (FPU19/03497) granted by the Spanish “Ministerio de Educación y Formación Profesional”. The authors wish to thank Juan Vicente López Baldó from the Food Technology Department at Universitat Politècnica de València for his technical support., info:eu-repo/semantics/publishedVersion
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Moderate electric field-assisted alkaline solubilization of lupin protein

  • Navarro-Vozmediano, Paola
  • Benedito, Jose
  • Bou, Ricard
  • Ribas-Agustí, Albert
  • Garcia-Perez, Jose V.
The nutritional quality of lupin is often limited by the presence of anti-nutritional factors (ANF), such as saponins and alkaloids, as well as anti-technological factors (ATF), including fat and polyphenols. This study evaluated the use of moderate electric field (MEF) during the protein solubilization stage as a strategy to reduce ANF and ATF and improve protein yield and the techno-functional properties of lupin protein isolate (LPI). Thus, 4 different treatments were applied during the alkaline solubilization for protein isolation purposes: (i) conventional (25 °C, 90 min), (ii) high temperature (60 °C, 45 min), (iii) MEF (60 °C, 45 min, 1200 Hz) with ON-OFF (25 V/cm) and (iv) Proportional control (up to 25 V/cm, avg 3.7 V/cm) algorithms to prevent overheating. Overall, MEF application led to a highly effective decrease in the ANF and ATF of LPI. Compared to high temperature isolation, MEF significantly lowered saponin content (1.93 g oleanolic acid/hg dm) and polyphenols (0.66 mg gallic acid/g dm). Additionally, techno-functional traits, such as water and oil absorption and foaming and emulsifying properties, were also enhanced. A prolonged voltage supply at low electric field under MEF proportional control effectively prevented overheating during protein solubilization and led to improved LPI properties when compared with ON-OFF control., This work was supported by the Grant PID2020-114422RR-C53 funded by MICIU/AEI/10.13039/501100011033. Paola Navarro-Vozmediano acknowledges the FPU PhD contract (FPU19/03497) granted by the Spanish “Ministerio de Educación y Formación Profesional”. Funding for open access charge: Universitat Politècnica de València., info:eu-repo/semantics/publishedVersion