Pasar al contenido principal

DISEÑO, CONSTRUCCION Y CONTROL PARA LA GESTION OPTIMA DE MISIONES EN AERONAVES NO TRIPULADAS (UAVS) DE RANGO EXTENDIDO BASADAS EN PILA DE HIDROGENO Y PROPULSION DISTRIBUIDA

PID2020-119468RA-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modified Active Disturbance Rejection Predictive Control: A fixed-order state-space formulation for SISO systems

  • Martínez-Carvajal, Blanca Viviana
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
[EN] This paper presents a novel control strategy that provides active disturbance rejection predictive control on constrained systems with no nominal identified model. The proposed loop relaxes the modelling requirement to a fixed discrete-time state¿space realisation of a first-order plus integrator plant despite the nature of the controlled process. A third-order discrete Extended State Observer (ESO) estimates the model mismatch and assumed plant states. Moreover, the constraints handling is tackled by incorporating the compensation term related to the total perturbation in the definition of the optimisation problem constraints. The proposal merges in a new way state¿space Model Predictive Control (MPC) and Active Disturbance Rejection Control (ADRC) into an architecture suitable for the servo-regulatory operation of linear and non-linear systems, as shown through validation examples., This work has been supported by MCIN/AEI/10.13039/501100011033 [Project PID2020-120087GB-C21] , MCIN/AEI/10.13039/501100011033 [Project PID2020-119468O-I00] , the Generalitat Valenciana regional government, Spain [Project CIAICO/2021/064] , and the Ministry of Science, Technology and Innovation of Colombia [scholarship programme 885] .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Computational Study of the Propeller Position Effects in Wing-Mounted, Distributed Electric Propulsion with Boundary Layer Ingestion in a 25 kg Remotely Piloted Aircraft

  • Serrano, J.R.|||0000-0003-0692-3917
  • Tiseira, Andrés-Omar|||0000-0001-9472-2386
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Varela-Martínez, Pau
[EN] Distributed electric propulsion and boundary layer ingestion are two attractive technologies to reduce the power consumption of fixed wing aircraft. Through careful distribution of the propulsive system elements, higher aerodynamic and propulsive efficiency can be achieved, as well as a lower risk of total loss of aircraft due to foreign object damage. When used on the wing, further reductions of the bending moment on the wing root can even lead to reductions of its structural weight, thus mitigating the expected increase of operating empty weight due to the extra components needed. While coupling these technologies in fixed-wing aircraft is being actively studied in the big aircraft segment, it is also an interesting approach for increasing the efficiency even for aircraft with maximum take-off masses as low as 25 kg, such as the A3 open subcategory for civil drones from EASA. This paper studies the effect of changing the propellers' position in the aerodynamic performance parameters of a distributed electric propulsion with boundary layer ingestion system in a 25 kg fixed-wing aircraft, as well as in the performance of the propellers. The computational results show the trade-offs between the aerodynamic efficiency and the propeller efficiency when the vertical position is varied., This research was funded by the Agencia Estatal de Investigacion of Spain through grant number PID2020-119468RA-I00/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Feasibility Study for a Fuel Cell-Powered Unmanned Aerial Vehicle with a 75 kg Payload

  • Desantes J.M.|||0000-0002-4124-9393
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • López-Juárez, Marcos|||0000-0001-9886-4728
[EN] Among the possible electric powerplants currently driving low-payload UAVs (up to around 10 kgof payload), batteries offer certain clear benefits, but for medium-payload operation such as aerotaxisand heavy-cargo transportation UAVs, battery capacity requirements restrict their usage due to highweight and volume. In light of this situation, fuel cell (FC) systems (FCS) offer clear benefits over batteriesfor the medium-payload UAV segment (> 50 kg). Nevertheless, studies regarding the application of FCSpowerplants to this UAV segment are limited and the in-flight performance has not been clearly analysed.In order to address this knowledge gap, a feasibility analysis of these particular applications powered byFCS is performed in this study. A validated FC stack model (40 kW of maximum power) was integratedinto a balance of plant to conform an FCS. As a novelty, the management of the FCS was optimized tomaximize the FCS efficiency at different altitudes up to 12500 ft, so that the operation always impliesthe lowest H2consumption regardless of the altitude. In parallel, an UAV numerical model was developedbased on the AtLANte vehicle and characterized by calculating the aerodynamic coefficients throughCFD simulations. then, both models were integrated into a 0D-1D modelling platform together withan energy management strategy optimizer algorithm and a suitable propeller model. With the preliminaryresults obtained from the FCS and UAV models, it was possible to ascertain the range and endurance ofthe vehicle. As a result, it was concluded that the combination of both technologies could offer a rangeover 600 km and an endurance over 5 h. Finally, with the integrated UAV-FCS model, a flight profiledescribing a medium altitude, medium endurance mission was designed and used to analyse the viabilityof FC-powered UAV. the results showed how UAVs powered by FCS are viable for the considered aircraftsegment, providing competitive values of specific range and endurance., this research has been partially funded by the Spanish Ministry of Science, Innovation, and University through the University Faculty training (FPU) program (FPU19/00550). this work is part of the project PID2020-119468rA-I00 funded by MCIN/AeI/ . Part of the research was also funded by Generalitat Valenciana and by ¿erDF A way of making europe¿ through grant number IDIFeDer/2021/039, as part of the program ¿Subvenciones para Infraestructuras y equipamiento de I+D+i¿. It was also partially funded by the Conselleria d¿Innovació, Universitats, Ciència i Societat Digital of the Generalitat Valenciana through grant with expedient number GV/2021/069 of the program for ¿Grupos de Investigación emergentes GV/2021¿.the hydrogen activities were also funded by grant eQC2019-005968-P funded by MCIN/AeI/ and by ¿erDF A way of making europe¿.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fuzzy Modeling Framework Using Sector Non-Linearity Techniques for Fixed-Wing Aircrafts

  • Brusola, Pablo
  • Bishop, Robert H.
  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
  • Salcedo-Romero-de-Ávila, José-Vicente|||0000-0003-1577-5039
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
[EN] This paper presents a mathematical modeling approach utilizing a fuzzy modeling framework for fixed-wing aircraft systems with the goal of creating a highly desirable mathematical representation for model-based control design applications. The starting point is a mathematical model comprising fifteen non-linear ordinary differential equations representing the dynamic and kinematic behavior applicable to a wide range of fixed-wing aircraft systems. Here, the proposed mathematical modeling framework is applied to the AIRBUS A310 model developed by ONERA. The proposed fuzzy modeling framework takes advantage of sector non-linearity red techniques to recast all the non-linear terms from the original model to a set of combined fuzzy rules. The result of this fuzzification is a more suitable mathematical description from the control system design point of view. Therefore, the combination of this fuzzy model and the wide range of control techniques available in the literature for such kind of models, like parallel and non-parallel distributed compensation control laws using linear matrix inequality optimization, enables the development of control algorithms that guarantee stability conditions for a wide range of operations points, avoiding the classical gain scheduling schemes, where the stability issues can be extremely challenging., This work is supported by the Spain government via MCIN/AEI/10.13039/501100 011033 [project PID2020-119468RA-I00].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Motion Equations and Attitude Control in the Vertical Flight of a VTOL Bi-Rotor UAV: Part 2

  • Musoles, Jose Luis
  • Garcia-Nieto, Sergio
  • Simarro Fernández, Raúl|||0000-0002-7311-2025
  • Ramos Fernández, César|||0000-0003-1806-2114
[EN] This paper gathers the dynamical modeling of an unmanned aircraft and the design and simulation of the control system, allowing it to perform a Vertical Take-Off (VTOL) maneuver, a fixed-wing (FW) flight and a transition between the two configurations using two tilting rotors (Bi-Tilt). These Unmanned Aerial Vehicles (UAVs) operating in this configuration are categorized as Hybrid UAVs, for their capability of having a dual flight envelope: flying like a multi-rotor and navigating like a traditional fixed-wing aircraft, allowing the drone to perform complex missions where these two flight configurations are essential. This work exhibits the Bi-Rotor non-linear dynamics, valid for both flight configurations, the design of the control algorithm for stability and navigation, and a simulation of a complete flight mission., This work has been supported by the Spain government via MCIN/AEI/10.13039/501100011033 [Project PID2020-119468RA-I00].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimising drone airframes for racing and flight dynamics performance

  • Castiblanco-Quintero, Jose Manuel
  • Ignatyev, Dmitry
  • Zolotas, Argyrios
  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
[EN] This study presents a systematic approach to optimising drone airframe geometry with a specific focus on enhanc- ing flight dynamics for racing applications. The proposed method integrates an elitist multi-objective evolutionary algorithm with mathematical procedures of varying natures, encapsulated within an algorithmic system of a simu- lation platform. The framework combines implicit numerical methods with a custom implementation to seamlessly interact across multiple simulation environments. This approach ensures the mathematical model closely reflects real-world conditions, providing reliable optimisation outcomes. The preliminary findings suggest that optimised airframe geometries lead to notable advancements in thrust e¿ciency and overall performance. Symmetrical and non-symmetrical designs exhibit distinct benefits, highlighting the potential for significant improvements in tra- jectory precision and flight e¿ciency. These results emphasise the practical impact of shape design and dynamic optimisation in drone airframes, o¿ering valuable insights for developing high-performance racing drones., This work has been supported by the Spanish government via MCIN/AEI/10.13039/501100011033 [Project PID2020-119468RA-I00].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving Racing Drones Flight Analysis: A Data-Driven Approach Using Motion Capture Systems

  • Castiblanco Quintero, Jose M.
  • Ignatyev, Dmitry I.
  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
  • Simarro Fernández, Raúl|||0000-0002-7311-2025
[EN] The publication of the previous study, titled "Experimental Study on the Dynamic Behaviour of Drones Designed for Racing Competitions", highlighted the increasing interest in employing scientific methods for their design and analysis. That study examined the flight data of 15 racing drones within a large flight area, using Doppler-type sensors for data collection. Building on these findings and seeking to enhance them, the current work introduces an upgraded data acquisition system utilising optical sensors, thereby improving measurement accuracy. These enhanced flight data facilitate the development of updated quality indices and conclusions, offering a more precise and definitive analysis than was previously possible., This work has been supported by the Spain government via MCIN/AEI/ 10.13039/501100011033 [Project PID2020-119468RA-I00].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Co-simulation platform for geometric design, trajectory control and guidance of racing drones

  • Castiblanco Quintero, J.M.
  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
  • Simarro Fernández, Raúl|||0000-0002-7311-2025
  • Salcedo-Romero-de-Ávila, José-Vicente|||0000-0003-1577-5039
[EN] The design of racing drones brings quite a thrilling challenge from a flight dynamics point of view. This work aims to offer a single-based simulation platform combining its geometric design, trajectory control, and guidance of racing drones. Also, it is reckoned from a pilot¿s view in a classic FPV competition. Hence, it is an active platform for studying racing drones¿ design founded on dynamics, with fifteen different drone models. It is one of the few existing platforms that combine all aspects of racing drones in a single simulation environment. Also, it is open access via Matlab Central - File Exchange., This work was partially supported by proyect PID2020-119468RA-I00 funded by MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Series-hybridisation, distributed electric propulsion and boundary layer ingestion in long-endurance, small remotely piloted aircraft: Fuel consumption improvements

  • Tiseira, Andrés-Omar|||0000-0001-9472-2386
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Quintero-Igeño, Pedro-Manuel|||0000-0003-4373-2079
  • Varela-Martínez, Pau
[EN] Series hybridisation, distributed electric propulsion (DEP) and boundary layer ingestion (BLI) are some of the most promising approaches for fuel consumption reductions in general aviation and commercial air transport. While these technologies can be also adapted for long endurance and long range, propeller-driven, small remotely piloted aircraft, their beneficial effects are not so clear due to the relatively high increase in propulsion system weight and the reduction in efficiency of the lower Reynolds number propellers. Using weights and efficiencies of off-the-shelf components, this work studies the impact of series hybridisation with and without DEP and BLI in a long endurance, 25 kg of maximum takeoff mass fixed wing aircraft, showing promising results with fuel consumption reductions of more than 15%., This research was partially funded by the Agencia Estatal de Investigación of Spain through grant number PID2020-119468RA-I00/ AEI / 10.13039/501100011033. It was also partially funded by the Conselleria d¿Innovació, Universitats, Ciència i Societat Digital of the Generalitat Valenciana through grant with expedient number GV/2021/069 of the program for ¿Grupos de Investigación Emergentes GV/2021¿.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Propeller Position Effects over the Pressure and Friction Coefficients over the Wing of an UAV with Distributed Electric Propulsion: A Proper Orthogonal Decomposition Analysis

  • Serrano, J.R.|||0000-0003-0692-3917
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Bares-Moreno, Pau|||0000-0001-9672-0819
  • Varela-Martínez, Pau
[EN] New propulsive architectures, with high interactions with the aerodynamic performance of the platform, are an attractive option for reducing the power consumption, increasing the resilience, reducing the noise and improving the handling of fixed-wing unmanned air vehicles. Distributed electric propulsion with boundary layer ingestion over the wing introduces extra complexity to the design of these systems, and extensive simulation and experimental campaigns are needed to fully understand the flow behaviour around the aircraft. This work studies the effect of different combinations of propeller positions and angles of attack over the pressure coefficient and skin friction coefficient distributions over the wing of a 25 kg fixed-wing remotely piloted aircraft. To get more information about the main trends, a proper orthogonal decomposition of the coefficient distributions is performed, which may be even used to interpolate the results to non-simulated combinations, giving more information than an interpolation of the main aerodynamic coefficients such as the lift, drag or pitching moment coefficients., This work was partially funded by the Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital of the Generalitat Valenciana through grant with expedient number GV/2021/069 of the program for "Grupos de Investigacion Emergentes GV/2021". This work is part of the project PID2020-119468RA-I00 funded by MCIN/AEI/10.13039/501100011033. This work is also part of the project EQC2019-006272-P funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe".