Pasar al contenido principal

PRINCIPIOS Y APLICACIONES DE LA MECANICA DEL SUELO PARA ANCLAJE DE INSTALACIONES MARINAS DE ENERGIAS RENOVABLES

PID2020-119598RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario CENTRE INTERNACIONAL DE METODES NUMERICS A L ENGINYERIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Simulation of grain fracture-induced pile creep and setup in sands

  • Lei, Jiangtao|||0000-0001-9458-725X
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Ciantia, Matteo Oryem|||0000-0003-1897-4471
Pile setup is now generally recognized as a characteristic feature of displacement pile axial response in sand. However, a clear understanding of the phenomena underlying pile setup is still missing because reliable and practical methodologies to study the problem are lacking. It is very difficult to measure and control all possible contributing factors in field testing experiments, whereas physical laboratory tests often fail to replicate field observations. The resulting ambiguities undermine proposals to incorporate setup in design procedures. A new methodology to study pile setup based on the discrete-element method (DEM) is proposed here. We build a virtual centrifuge chamber using a granular material DEM model calibrated to represent Fontainebleau sand, a quartz sand. The DEM material model, which incorporates delayed grain fracture, was previously verified by reproducing creep and relaxation in element tests, but relies on much simpler measurements for material calibration. Model piles are installed in the chamber by jacking, performing long (up to 1 month) creep stages and measuring shaft resistance at regular intervals by means of pullout tests. The simulated pile creep and pullout responses were well-aligned with previous experimental observations. The simulations presented strongly support the hypothesis that delayed grain fracture is a significant contributor to pile setup. The methodology presented opens the way to quantify this and other physically based explanations of pile setup and creep., Spanish Research Agency support (AEI) through research project PID2020-119598RB-I00 is acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A relation between undrained CPTu results and the state parameter for liquefiable soils

  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Gens Solé, Antonio|||0000-0001-7588-7054
This paper presents a new interpretation procedure to estimate the initial state parameter from cone penetration testing (CPTu) in undrained conditions based on the results from a comprehensive set of numerical simulations of CPTu in low permeability liquefiable soil. CPTu simulations are performed using the Particle Finite Element Method, whereas the material response is modelled with the Clay and Sand Model. The effects of soil constitutive parameters and roughness of the soil–steel interface are examined. It turns out that the numerical results are correctly summarized by an analytical relation derived from undrained cavity expansion results in critical state soils, as long as the constraints resulting from cone geometry are taken into account. The resulting adapted analytical formulation is notable for its simplicity and ease of use, comparing favorably with existing alternatives., The authors wish to thank Dr. Stefano Collico (UPC), Mr. Davide Besenzon (Escuela Superior Politécnica del Litoral) and Mohammad Razavinasab (CIMNE) for fruitful discussions at the beginning of the research. Financial support of Ministerio de Ciencia e Innovación of Spain (MCIN/AEI/10.13039/501100011033) through the Severo Ochoa Centre of Excellence project (CEX2018-000797-S) and research project PID2020-119598RB-I00 is gratefully appreciated., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Discrete-element based simulation of CPT and SPT on a volcanic sand

  • Lei, Jiangtao|||0000-0001-9458-725X
  • Zhang, Ningning
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Ciantia, Matteo Oryem|||0000-0003-1897-4471
In situ soil characterization often involves penetration tests. The response to both static and dynamic penetration in volcanic sands is known to be controlled by particle crushing, obscuring the effect of density and confinement on the response. This severely limits the use of penetration tests for soil characterization. In this work a virtual calibration chamber (VCC) built using the discrete element method (DEM) is employed to explore the relationship between cone penetration tests CPTs (static) and standard penetration tests SPTs (dynamic) results on a volcanic sand. The simulated CPT results are shown to capture well experiments from the literature over a range of density and confining stress. The comparison between the simulated CPT and SPT results shows good agreement with empirical expressions based on particle size. It was found that energy-based equivalent dynamic tip resistance obtained from the SPT is a good match for static cone tip resistance if shaft resistance effects are discounted. The results presented confirm the potential of DEM based VCC to examine the performance of in-situ tests in complex soil conditions., This work was partly supported by the Ministry of Science and Innovation of Spain through research project PID2020-119598RB-I00., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

An unconditionally stable explicit finite element algorithm for coupled hydromechanical problems of soil mechanics in pseudo-static conditions

  • Monforte Vila, Lluís
  • Carbonell Puigbó, Josep Maria|||0000-0002-2378-5053
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Gens Solé, Antonio|||0000-0001-7588-7054
This is the peer reviewed version of the following article: [Monforte, L, Carbonell, JM, Arroyo, M, Gens, A. An unconditionally stable explicit finite element algorithm for coupled hydromechanical problems of soil mechanics in pseudo-static conditions. Int J Numer Methods Eng. 2022; 123( 21): 5319– 5345. doi:10.1002/nme.7064], which has been published in final form https://doi.org/10.1002/nme.7064. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., In this article, we present a novel explicit time-integration algorithm for the coupled hydromechanical soil mechanics problems in a pseudo-static regime. After introducing the finite element discretization, the semidiscrete ordinary system of equations is integrated explicitly in time with the Runge–Kutta method. It is noted that this formulation is conditionally stable in time. By introducing a stabilization technique, the Polynomial Pressure Projection, and selecting appropriately the stabilization parameter, the formulation becomes unconditionally stable. To illustrate the performance of the method several numerical analysis are reported, considering both elastic and elasto-plastic soil behavior., Financial support of Ministerio de Ciencia e Innovación of Spain (MCIN/AEI/10.13039/501100011033) through the Severo Ochoa Centre of Excellence project (CEX2018-000797-S) and research project PID2020-119598RB-I00 is gratefully appreciated., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Exploring the numerical performance of node-based smoothed finite elements in coupled hydro-mechanical problems

  • Monforte Vila, Lluís
  • Collico, Stefano
  • Carbonell Puigbó, Josep Maria|||0000-0002-2378-5053
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Gens Solé, Antonio|||0000-0001-7588-7054
Node-based smoothed finite element (NS-FEM) formulations for the coupled hydro-mechanical problem are now becoming popular in soil mechanics, but there has been limited comparative study of their performance. In this work, a node-based formulation is developed for the coupled hydro-mechanical problem (u-pw formulation) using low-order, equal-order interpolants and an implicit time marching scheme for the global problem. The numerical properties of the resulting formulation are then compared to different implementations of classical finite elements. The use of nodal smoothing does not render by itself the solution stable at the undrained limit, on the contrary, the range of undrained instability is increased. Stabilizing terms previously employed in FEM are equally successful in stabilizing NS-FEM solutions, but the computational cost of the stabilized solution is much higher for NS-FEM. It is also shown that NS-FEM does not present by itself any particular advantage in terms of mesh dependency over classic FEM: when strain localization is present the solution obtained is strongly dependent on mesh size., Financial support of Ministerio de Ciencia e Innovación of Spain (MCIN/AEI/10.13039/501100011033) through the Severo Ochoa Centre of Excellence project (CEX2018-000797-S) and research project PID2020-119598RB-I00 is gratefully appreciated., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Coupled hydromechanical modelling of cone penetration in layered liquefiable soils

  • Boschi, Katia
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Monforte Vila, Lluís
  • Carbonell Puigbó, Josep Maria|||0000-0002-2378-5053
  • Gens Solé, Antonio|||0000-0001-7588-7054
Soil layering modifies cone penetration measurements when the cone is close to layer boundaries. Transition zone and thin-layer effects appear, complicating interpretation. To help identify the mechanisms underlying transition and thin-layer effects, several series of realistic simulations of cone penetration in layered soils are presented. Cone penetration tests are simulated using fully coupled hydromechanical models solved with the particle finite element method. A constitutive model capable of representing flow liquefaction is employed to explore the effect of embedded layers with different initial state parameter and/or hydraulic conductivity than the host soil. Sensing and development distances for tip resistance and excess pore pressure are examined, as well as the effect of layering on dissipation tests. It is shown how distortion of layer interfaces by the cone is captured, explaining several characteristics of pore pressure and dissipation records. It is also shown that looser soil states may be hidden in the tip resistance trace by simultaneous changes in soil hydraulic conductivity., Financial support of Spain Research Agency (MCIN/AEI/10.13039/501100011033) through the Severo Ochoa Centre of Excellence project (CEX2018- 000797-S) and research project PID2020-119598RB- I00., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A breakage-based discrete element study of stress relaxation in quartz sands

  • Lei, Jiangtao|||0000-0001-9458-725X
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Ciantia, Matteo Oryem|||0000-0003-1897-4471
  • Zhang, Ningning
Stress relaxation of quartz sands is simulated using a recently proposed physically based time-to-fracture discrete element method framework. The framework incorporates time-dependency through stress-corrosion-induced grain fracture. This feature is embedded into a pre-existing particle-splitting-based rough-contact crushable model. The model is calibrated to represent Fontainebleau sand, a quartz sand. A controlled on–off computational strategy is adopted to advance the simulation efficiently. Model predictions are shown to compare favourably with laboratory results in oedometric and triaxial conditions in terms of stress relaxation and relaxation rate. Grain size distribution evolution is also tracked and shown to compare well with available laboratory results. The influence of initial mobilized strength q/qmax on stress relaxation is recovered by the model, and explained through increased grain breakage. The simulated relaxation results are examined at the microscale and compared with those from creep experiments. The model displays the nonisochronous behaviour characteristic of sands. The relaxation tests display a state shift towards higher dilatancy conditions that may offer a possible explanation for some observations of pile set-up., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A fracture-based discrete model for simulating creep in quartz sands

  • Lei, Jiangtao|||0000-0001-9458-725X
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Ciantia, Matteo Oryem|||0000-0003-1897-4471
  • Zhang, Ningning
Creep of granular soils is frequently accompanied by grain breakage. Stress corrosion driven grain breakage offers a micromechanically based explanation for granular creep. This study incorporates that concept into a new model based on the discrete element method (DEM) to simulate creep in sands. The model aims for conceptual simplicity, computational efficiency and ease of calibration. To this end a new form of normalized Charles power law is incorporated into a DEM model for rough-crushable sands based on the particle splitting technique. The model is implemented using a controlled on-off computational strategy. The model is validated by simulating creep in quartz sands in oedometric and triaxial conditions. Model predictions are shown to compare favourably with experimental results in terms of creep strain, creep strain rates and particle breakage. The model proposed would facilitate the calibration of phenomenological continuum models, but may be also useful to directly investigate structural scale phenomena, such as pile ageing., Spanish Research Agency support (AEI) through research project PID2020-119598RB-I00 is also acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Bayesian mixture analysis of a global database to improve unit weight prediction from CPTu

  • Collico, Stefano
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
Empirical correlations between different geotechnical parameters are frequently sought after by exploiting multivariate databases. An example are estimations of total unit weight from cone penetration tests (CPTu), which are very useful in earlier design stages. If the underlying soil database includes data from many different soils a single correlation may lack precision. Precision is gained when the underlying database is narrowed down to some specific soil type, but the applicability of a soil-specific correlation is also limited. A way out of this dilemma is to apply clustering techniques to a general database before developing separate correlations for different clusters. Projecting the clustered data back to a convenient classification space (e.g., one spanned by normalized CPTu metrics) new data can be easily assigned to different clusters and the appropriate correlation used. This idea is illustrated here using Bayesian Mixture Analysis (BMA) to identify hidden soil classes within a general geotechnical database that supports correlations between soil total unit weight and CPTu readings. It is shown that BMA supported clustering improves the accuracy of previous regressions, and, more importantly, facilitates the formulation of novel and more accurate regressions. A simple discriminant criterion is developed to facilitate application of cluster-based regressions to new sites. The good performance of the method is illustrated with application to a deltaic site., This research received funding from the European Union's Horizon 2020 research and innovating programme under the Marie Sklodowska-Curie grant agreement No 721403. Financial support of Ministerio de Ciencia e Innovación of Spain through research project PID2020-119598RB-I00 is gratefully appreciated, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A simple approach to probabilistic CPTu-based geotechnical stratigraphic profiling

  • Collico, Stefano
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Devincenzi, Marcelo
Geotechnical profile delineation is an important aspect of the geotechnical engineering design process. The Cone Penetration Test (CPTu) is widely used for this purpose, as it is simple to classify soils based on their different responses to the cone. However, CPTu-based delineations typically involve engineering interpretation, as they are affected by the classification scheme applied, by inherent soil variability and by measurements error. A semi-automated CPTu data treatment tool is here presented aiming to simplify the soil delineation task, adding consistency and transparency to the involved engineering interpretation process and facilitating the transference of information between the different parties involved in design. The tool fits bivariate normal distributions to interpreted CPTu data according to some user specified criteria that quantify estimated classification and measurement uncertainties. Classification makes use of conventional class boundaries –here taken from Robertson, 1990 chart-, which are applied with user-specified refinement. Thin layers are consolidated into adjacent ones to further simplify the resulting profile. The operation of the proposed algorithm is illustrated by interpreting CPTu records from a deltaic sedimentary environment. The outputs of this simple method may be used as input for more advanced probabilistic methodologies, helping thus to bridge the gap between qualitative practice and quantitative research methods., This research received funding from the European Union’s Horizon 2020 research and innovating programme under the Marie Sklodowska-Curie grant agreement No 721403. Financial support of Ministerio de Ciencia e Innovación of Spain through research project PID2020-119598RB-I00 is gratefully appreciated., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Stress field on intermediate length scales during triaxial compression

  • González Tejada, Ignacio
  • Arroyo Álvarez de Toledo, Marcos|||0000-0001-9384-9107
  • Ciantia, Matteo
Defining a continuum stress field in a granular medium involves an approximation, as the underlying contact force network between particles is inhomogeneous and random. The continuum approximation introduces some baseline noise or variability in stress, which becomes more significant as the length scale of interest approaches the typical size of the grains. In this study, the authors evaluate how the stress variability resulting from the homogenisation of intergranular forces changes as the homogenisation scale is increased. This is done by obtaining the probability distribution function of stresses from a large number of repeated discrete-element method-based simulations of the triaxial compression of granular samples. The numerical experiments share sample dimensions, generation protocols and imposed stresses, but involve randomly generated sets of granular packings made of different numbers of particles. The results from this study are used to propose and develop a consistent general framework to rigorously describe mesoscale stress fields and hence fill the gap between existing micro- and macromechanical approaches. A backbone curve is obtained expressing the change in stress variability as the mesoscale is traversed. The results deduced from the backbone curve are in good agreement with those of independent numerical and physical experiments on granular soils., The financial support by Ministerio de Ciencia e Innovación of Spain (MCIN/AEI/10·13039/501100011033) through research project PID2020-119598RB-I00 is gratefully acknowledged., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An unconditionally stable explicit finite element algorithm for coupled hydromechanical problems of soil mechanics in pseudo-static conditions

  • Monforte Vila, Lluís
  • Carbonell Puigbó, Josep Maria
  • Arroyo Álvarez de Toledo, Marcos
  • Gens Solé, Antonio
This is the peer reviewed version of the following article: [Monforte, L, Carbonell, JM, Arroyo, M, Gens, A. An unconditionally stable explicit finite element algorithm for coupled hydromechanical problems of soil mechanics in pseudo-static conditions. Int J Numer Methods Eng. 2022; 123( 21): 5319– 5345. doi:10.1002/nme.7064], which has been published in final form https://doi.org/10.1002/nme.7064. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., In this article, we present a novel explicit time-integration algorithm for the coupled hydromechanical soil mechanics problems in a pseudo-static regime. After introducing the finite element discretization, the semidiscrete ordinary system of equations is integrated explicitly in time with the Runge–Kutta method. It is noted that this formulation is conditionally stable in time. By introducing a stabilization technique, the Polynomial Pressure Projection, and selecting appropriately the stabilization parameter, the formulation becomes unconditionally stable. To illustrate the performance of the method several numerical analysis are reported, considering both elastic and elasto-plastic soil behavior., Financial support of Ministerio de Ciencia e Innovación of Spain (MCIN/AEI/10.13039/501100011033) through the Severo Ochoa Centre of Excellence project (CEX2018-000797-S) and research project PID2020-119598RB-I00 is gratefully appreciated., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Exploring the numerical performance of node-based smoothed finite elements in coupled hydro-mechanical problems

  • Monforte Vila, Lluís
  • Collico, Stefano
  • Carbonell Puigbó, Josep Maria
  • Arroyo Álvarez de Toledo, Marcos
  • Gens Solé, Antonio
Node-based smoothed finite element (NS-FEM) formulations for the coupled hydro-mechanical problem are now becoming popular in soil mechanics, but there has been limited comparative study of their performance. In this work, a node-based formulation is developed for the coupled hydro-mechanical problem (u-pw formulation) using low-order, equal-order interpolants and an implicit time marching scheme for the global problem. The numerical properties of the resulting formulation are then compared to different implementations of classical finite elements. The use of nodal smoothing does not render by itself the solution stable at the undrained limit, on the contrary, the range of undrained instability is increased. Stabilizing terms previously employed in FEM are equally successful in stabilizing NS-FEM solutions, but the computational cost of the stabilized solution is much higher for NS-FEM. It is also shown that NS-FEM does not present by itself any particular advantage in terms of mesh dependency over classic FEM: when strain localization is present the solution obtained is strongly dependent on mesh size., Financial support of Ministerio de Ciencia e Innovación of Spain (MCIN/AEI/10.13039/501100011033) through the Severo Ochoa Centre of Excellence project (CEX2018-000797-S) and research project PID2020-119598RB-I00 is gratefully appreciated., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A fracture-based discrete model for simulating creep in quartz sands

  • Lei, Jiangtao
  • Arroyo Álvarez de Toledo, Marcos
  • Ciantia, Matteo Oryem
  • Zhang, Ningning
Creep of granular soils is frequently accompanied by grain breakage. Stress corrosion driven grain breakage offers a micromechanically based explanation for granular creep. This study incorporates that concept into a new model based on the discrete element method (DEM) to simulate creep in sands. The model aims for conceptual simplicity, computational efficiency and ease of calibration. To this end a new form of normalized Charles power law is incorporated into a DEM model for rough-crushable sands based on the particle splitting technique. The model is implemented using a controlled on-off computational strategy. The model is validated by simulating creep in quartz sands in oedometric and triaxial conditions. Model predictions are shown to compare favourably with experimental results in terms of creep strain, creep strain rates and particle breakage. The model proposed would facilitate the calibration of phenomenological continuum models, but may be also useful to directly investigate structural scale phenomena, such as pile ageing., Spanish Research Agency support (AEI) through research project PID2020-119598RB-I00 is also acknowledged., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Stress field on intermediate length scales during triaxial compression

  • González Tejada, Ignacio
  • Arroyo Álvarez de Toledo, Marcos
  • Ciantia, Matteo
Defining a continuum stress field in a granular medium involves an approximation, as the underlying contact force network between particles is inhomogeneous and random. The continuum approximation introduces some baseline noise or variability in stress, which becomes more significant as the length scale of interest approaches the typical size of the grains. In this study, the authors evaluate how the stress variability resulting from the homogenisation of intergranular forces changes as the homogenisation scale is increased. This is done by obtaining the probability distribution function of stresses from a large number of repeated discrete-element method-based simulations of the triaxial compression of granular samples. The numerical experiments share sample dimensions, generation protocols and imposed stresses, but involve randomly generated sets of granular packings made of different numbers of particles. The results from this study are used to propose and develop a consistent general framework to rigorously describe mesoscale stress fields and hence fill the gap between existing micro- and macromechanical approaches. A backbone curve is obtained expressing the change in stress variability as the mesoscale is traversed. The results deduced from the backbone curve are in good agreement with those of independent numerical and physical experiments on granular soils., The financial support by Ministerio de Ciencia e Innovación of Spain (MCIN/AEI/10·13039/501100011033) through research project PID2020-119598RB-I00 is gratefully acknowledged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A relation between undrained CPTu results and the state parameter for liquefiable soils

  • Monforte Vila, Lluís
  • Arroyo Álvarez de Toledo, Marcos
  • Gens Solé, Antonio
This paper presents a new interpretation procedure to estimate the initial state parameter from cone penetration testing (CPTu) in undrained conditions based on the results from a comprehensive set of numerical simulations of CPTu in low permeability liquefiable soil. CPTu simulations are performed using the Particle Finite Element Method, whereas the material response is modelled with the Clay and Sand Model. The effects of soil constitutive parameters and roughness of the soil–steel interface are examined. It turns out that the numerical results are correctly summarized by an analytical relation derived from undrained cavity expansion results in critical state soils, as long as the constraints resulting from cone geometry are taken into account. The resulting adapted analytical formulation is notable for its simplicity and ease of use, comparing favorably with existing alternatives., The authors wish to thank Dr. Stefano Collico (UPC), Mr. Davide Besenzon (Escuela Superior Politécnica del Litoral) and Mohammad Razavinasab (CIMNE) for fruitful discussions at the beginning of the research. Financial support of Ministerio de Ciencia e Innovación of Spain (MCIN/AEI/10.13039/501100011033) through the Severo Ochoa Centre of Excellence project (CEX2018-000797-S) and research project PID2020-119598RB-I00 is gratefully appreciated., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Coupled hydromechanical modelling of cone penetration in layered liquefiable soils

  • Boschi, Katia
  • Arroyo Álvarez de Toledo, Marcos
  • Monforte Vila, Lluís
  • Carbonell Puigbó, Josep Maria
  • Gens Solé, Antonio
Soil layering modifies cone penetration measurements when the cone is close to layer boundaries. Transition zone and thin-layer effects appear, complicating interpretation. To help identify the mechanisms underlying transition and thin-layer effects, several series of realistic simulations of cone penetration in layered soils are presented. Cone penetration tests are simulated using fully coupled hydromechanical models solved with the particle finite element method. A constitutive model capable of representing flow liquefaction is employed to explore the effect of embedded layers with different initial state parameter and/or hydraulic conductivity than the host soil. Sensing and development distances for tip resistance and excess pore pressure are examined, as well as the effect of layering on dissipation tests. It is shown how distortion of layer interfaces by the cone is captured, explaining several characteristics of pore pressure and dissipation records. It is also shown that looser soil states may be hidden in the tip resistance trace by simultaneous changes in soil hydraulic conductivity., Financial support of Spain Research Agency (MCIN/AEI/10.13039/501100011033) through the Severo Ochoa Centre of Excellence project (CEX2018- 000797-S) and research project PID2020-119598RB- I00., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Bayesian mixture analysis of a global database to improve unit weight prediction from CPTu

  • Collico, Stefano
  • Arroyo Álvarez de Toledo, Marcos
Empirical correlations between different geotechnical parameters are frequently sought after by exploiting multivariate databases. An example are estimations of total unit weight from cone penetration tests (CPTu), which are very useful in earlier design stages. If the underlying soil database includes data from many different soils a single correlation may lack precision. Precision is gained when the underlying database is narrowed down to some specific soil type, but the applicability of a soil-specific correlation is also limited. A way out of this dilemma is to apply clustering techniques to a general database before developing separate correlations for different clusters. Projecting the clustered data back to a convenient classification space (e.g., one spanned by normalized CPTu metrics) new data can be easily assigned to different clusters and the appropriate correlation used. This idea is illustrated here using Bayesian Mixture Analysis (BMA) to identify hidden soil classes within a general geotechnical database that supports correlations between soil total unit weight and CPTu readings. It is shown that BMA supported clustering improves the accuracy of previous regressions, and, more importantly, facilitates the formulation of novel and more accurate regressions. A simple discriminant criterion is developed to facilitate application of cluster-based regressions to new sites. The good performance of the method is illustrated with application to a deltaic site., This research received funding from the European Union's Horizon 2020 research and innovating programme under the Marie Sklodowska-Curie grant agreement No 721403. Financial support of Ministerio de Ciencia e Innovación of Spain through research project PID2020-119598RB-I00 is gratefully appreciated, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A breakage-based discrete element study of stress relaxation in quartz sands

  • Lei, Jiangtao
  • Arroyo Álvarez de Toledo, Marcos
  • Ciantia, Matteo Oryem
  • Zhang, Ningning
Stress relaxation of quartz sands is simulated using a recently proposed physically based time-to-fracture discrete element method framework. The framework incorporates time-dependency through stress-corrosion-induced grain fracture. This feature is embedded into a pre-existing particle-splitting-based rough-contact crushable model. The model is calibrated to represent Fontainebleau sand, a quartz sand. A controlled on–off computational strategy is adopted to advance the simulation efficiently. Model predictions are shown to compare favourably with laboratory results in oedometric and triaxial conditions in terms of stress relaxation and relaxation rate. Grain size distribution evolution is also tracked and shown to compare well with available laboratory results. The influence of initial mobilized strength q/qmax on stress relaxation is recovered by the model, and explained through increased grain breakage. The simulated relaxation results are examined at the microscale and compared with those from creep experiments. The model displays the nonisochronous behaviour characteristic of sands. The relaxation tests display a state shift towards higher dilatancy conditions that may offer a possible explanation for some observations of pile set-up., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Discrete-element based simulation of CPT and SPT on a volcanic sand

  • Lei, Jiangtao
  • Zhang, Ningning
  • Arroyo Álvarez de Toledo, Marcos
  • Ciantia, Matteo Oryem
In situ soil characterization often involves penetration tests. The response to both static and dynamic penetration in volcanic sands is known to be controlled by particle crushing, obscuring the effect of density and confinement on the response. This severely limits the use of penetration tests for soil characterization. In this work a virtual calibration chamber (VCC) built using the discrete element method (DEM) is employed to explore the relationship between cone penetration tests CPTs (static) and standard penetration tests SPTs (dynamic) results on a volcanic sand. The simulated CPT results are shown to capture well experiments from the literature over a range of density and confining stress. The comparison between the simulated CPT and SPT results shows good agreement with empirical expressions based on particle size. It was found that energy-based equivalent dynamic tip resistance obtained from the SPT is a good match for static cone tip resistance if shaft resistance effects are discounted. The results presented confirm the potential of DEM based VCC to examine the performance of in-situ tests in complex soil conditions., This work was partly supported by the Ministry of Science and Innovation of Spain through research project PID2020-119598RB-I00., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A simple approach to probabilistic CPTu-based geotechnical stratigraphic profiling

  • Collico, Stefano
  • Arroyo Álvarez de Toledo, Marcos
  • Devincenzi, Marcelo
Geotechnical profile delineation is an important aspect of the geotechnical engineering design process. The Cone Penetration Test (CPTu) is widely used for this purpose, as it is simple to classify soils based on their different responses to the cone. However, CPTu-based delineations typically involve engineering interpretation, as they are affected by the classification scheme applied, by inherent soil variability and by measurements error. A semi-automated CPTu data treatment tool is here presented aiming to simplify the soil delineation task, adding consistency and transparency to the involved engineering interpretation process and facilitating the transference of information between the different parties involved in design. The tool fits bivariate normal distributions to interpreted CPTu data according to some user specified criteria that quantify estimated classification and measurement uncertainties. Classification makes use of conventional class boundaries –here taken from Robertson, 1990 chart-, which are applied with user-specified refinement. Thin layers are consolidated into adjacent ones to further simplify the resulting profile. The operation of the proposed algorithm is illustrated by interpreting CPTu records from a deltaic sedimentary environment. The outputs of this simple method may be used as input for more advanced probabilistic methodologies, helping thus to bridge the gap between qualitative practice and quantitative research methods., This research received funding from the European Union’s Horizon 2020 research and innovating programme under the Marie Sklodowska-Curie grant agreement No 721403. Financial support of Ministerio de Ciencia e Innovación of Spain through research project PID2020-119598RB-I00 is gratefully appreciated., Peer Reviewed, Postprint (author's final draft)