Pasar al contenido principal

SISTEMAS DE ALMACENAMIENTO AVANZADOS PARA LA OPTIMIZACION DE PLANTAS DE PRODUCCION DE HIDROGENO VERDE

PID2022-139914OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD PUBLICA DE NAVARRA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Methodology for comparative assessment of battery technologies: experimental design, modeling, performance indicators and validation with four technologies

  • Irujo Izcue, Elisa
  • Berrueta Irigoyen, Alberto
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
An increasing number of applications with diverse requirements incorporate various battery technologies. Selecting the most suitable battery technology becomes a tedious task as several aspects need to be taken into account. Two of the key aspects are the battery characteristics under temperature variations and their degradation. While numerous contributions using tailored assessment methods to evaluate both aspects for a particular application exist in the literature, a general methodology for analysis is necessary to enable a quantitative comparison between different technologies. We propose in this paper a novel methodology, based on performance indicators, to quantify the potential and limitations of a battery technology for diverse applications sharing a similar operational profile. A quantification of phenomena such as the influence of high and low temperatures on the battery, or the effect of cycling and state of charge on battery aging is obtained. In pursuit of these indicators, an experimental procedure and the fitting of aging model parameters that allow their calculation are proposed. As an additional outcome of this work, a general aging model that allows comprehensive analysis of aging behavior is developed and the trade-off between experimental time and accuracy is analyzed to find an optimal experimental time between 2 and 4 months, depending on the studied battery technology. Finally, the proposed methodology is applied to four battery technologies in order to show its potential in a real case-study., This work was supported by grants PID2022-139914OB-I00 funded by MICIU/AEI/10.13039/501100011033/ (Spain) and by ERDF/EU (European Union), TED2021-132457B-I00 funded by MICIU/AEI/10.13039/501100011033/ (Spain) and by the NextGenerationEU/PRTR (European Union), HYBPLANT (0011-1411-2022-000039) funded by the Government of Navarre (Spain), and Lion2H2 (PJUPNA2023-11380) funded by the Public University of Navarre (Spain). Elisa Irujo was supported by a predoctoral contract from the Public University of Navarre (Spain).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Modeling and optimal sizing of thyristor rectifiers for high-power hydrogen electrolyzers

  • Iribarren Zabalegui, Álvaro
  • Barrios Rípodas, Ernesto
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Thyristor rectifiers are currently the most common solution for supplying high-power electrolyzers. These rectifiers typically include a dc inductance, which significantly increases system costs. However, this inductance can be avoided by relying solely on ac-side inductances, required for grid current harmonic filtering, although this approach introduces specific challenges. Traditional analytical models of thyristor rectifiers are unable to determine the electrolyzer operating point for a given firing angle and may lead to incorrect system sizing, ultimately preventing the converter from delivering nominal power. This limitation arises from the fact that existing models are formulated for inductive or constant-current loads, whereas electrolyzers exhibit electrical behavior closer to constant-voltage loads. In this paper, a novel analytical model of 6- and 12-pulse thyristor rectifiers with constant-voltage load is developed. The model enables the analysis and optimal sizing of thyristor rectifiers directly connected to electrolyzers without a dc-side inductance. Its accuracy has been validated through both simulations and experimentally using a laboratory-scale prototype. Furthermore, the model has been applied to optimally size a 12-pulse rectifier supplying a 5.5 MW electrolyzer, demonstrating its suitability for the design of thyristor rectifier systems in industrial-scale electrolysis applications and highlighting its advantages over traditional approaches., This work is part of the projects PID2022-142791OB-I00 and PID2022-139914OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by "ERDF/EU", and has also been supported by the Public University of Navarra under a Ph.D. scholarship.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Aging behavior of commercial 18650 sodium-ion cells revealed by non-destructive impedance-derived parameters and post-mortem analysis

  • Irujo Izcue, Elisa
  • Berrueta Irigoyen, Alberto
  • Schütte, Moritz Fabian
  • Ditler, Heinrich
  • Rahe, Christiane
  • Sauer, Dirk Uwe
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
The rapid expansion of energy storage needs and concerns over lithium availability have renewed interest in sodium-ion batteries (SIBs) as a complementary technology to lithium-ion systems. Yet, systematic studies on their aging analysis strategies with the aim of detecting aging indicators remain limited. In this study, we present a comprehensive aging analysis, combining non-destructive electrochemical impedance spectroscopy (EIS) with equivalent circuit model (ECM) parameter tracking and post-mortem analysis. Tracking the longitudinal evolution of ECM-derived parameters demonstrates their utility as aging indicators. Post-mortem and elemental mapping analysis provides mechanistic support for the impedance trends, focusing on characterizing aging mechanisms from a morphological perspective. The methodology is applied to a commercial 1.3 Ah 18650 SIB with a layered-oxide cathode and hard carbon anode at an early-stage development showing a short life cycle of 500 cycles to reach a SOH of 50%, but slower capacity fade under calendar remaining over a SOH of 90% after more than 600 days. ECM parameters show consistent evolution with SOH and aging mechanisms occurring inside the battery observing correlations valuable for potential aging indicators. Post-mortem and elemental mapping confirm sodium plating on the anode surface even in pristine cells. The study clarifies their compositional and morphological evolution through aging. Notably, the study investigates cells down to <[jls-end-space/]60% SOH, a range rarely reported in the literature. The methodology proposed here establishes a replicable framework for monitoring degradation and evaluating aging indicators in sodium-ion batteries, facilitating comparative studies across early-stage cells and supporting the design of improved future generations., This work was supported by grants PID2022-139914OB-I00 funded by MICIU/AEI/10.13039/501100011033/ (Spain) and by ERDF/EU (European Union) , and by PRIDEBAT ( PC24-PRIDEBAT-014-002 ) funded by the Department of University, Innovation and Digital Transformation of the Government of Navarre (Spain) . It was also supported by the Federal Ministry for Economic Affairs and Energy (BMWE) of Germany under grant number 03EI6106 (WINTER) and by the Federal Ministry of Research, Technology and Space (BMFTR) of Germany under grant number 03XP0627I (SIB:DE). Elisa Irujo was supported by a predoctoral contract from the Public University of Navarre (Spain) .
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

In-depth characterization and equivalent-circuit representation of lithium-ion batteries for on-line diagnosis: cell-level proposal and battery-level validation

  • Soto Cabria, Adrián
  • Berrueta Irigoyen, Alberto
  • Ruiz de Galarreta Gómez, Olatz
  • Bruch, Maximilian
  • Kevlishvili, Nina
  • Lux, Stephan
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
Lithium-ion batteries are key components for electric mobility and renewable energy systems. Their effective use in such applications requires precise tools for real-time diagnosis and refined energy management techniques. While battery characterization and modeling are closely related, they are often tackled in isolation due to the challenge of developing models that encapsulate complex physicochemical processes. In response, this paper presents a new approach for an on-line, non-invasive characterization technique of the battery impedance based on power steps, which are a typical process in regular battery operation. The proposed impedance representation is linked to the underlying physicochemical phenomena that drive the operation of a battery, which offers a real-time diagnosis tool to infer insights into underlying phenomena such as lithium anode depletion and phase transitions within both electrodes. This characterization proves instrumental in identifying the key parameters for an equivalent-circuit model. The proposed methodology is proven to be resilient and accurate, given the comprehensive dataset of 1600 experiments used to fit the impedance parameters. Finally, we scale up the cell-level model to represent a commercial 38.4 kWh battery pack. The results prove the robustness of the model, providing a normalized root mean squared error lower than 0.5% across all steady-state and dynamic validations. In essence, this paper proposes a methodology that combines real-time access to underlying battery dynamics with accurate performance simulation., This work was supported by grants PID2022-139914OB-I00 funded by MICIU/AEI/10.13039/501100011033 (Spain) and by ERDF/EU (European Union), TED2021-132457B-I00 funded by MICIU/AEI/ 10.13039/501100011033 (Spain) and by the NextGenerationEU/PRTR (European Union). Parts of this work have been also funded by the "EnStadt: Pfaff" project (grant no. 03SBE112D) and by the EMILAS project (grant no. 03ETE024E) of the German Federal Ministry for Economic Affairs and Climate Action (BMWK). Olatz Ruiz de Galarreta was supported by a predoctoral contract from the Public University of Navarre (Spain).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Doubly fed induction generator robust design for avoiding converter-driven instability: perspective

  • Sáiz-Marín, Elena
  • Zarei, Mohammad Ebrahim
  • Medina, Diego
  • Curbelo, Óscar
  • Muñoz Babiano, Almudena
  • Berrueta Irigoyen, Alberto
  • Ursúa Rubio, Alfredo
  • Sanchis Gúrpide, Pablo
Renewable power generation has experienced significant global deployment, leading to the replacement of synchronous generators, which traditionally defined the slow dynamics of power systems. As a result, stability issues related to converter dynamics are becoming increasingly prominent. It is crucial for the grid system to be sure that the renewable generation is robust with regard to the converter dynamics to avoid instability issues. This paper focuses on enhancing wind farm robustness to minimize the risk of converter-driven stability phenomena, considering both grid-feeding and grid-forming control schemes. Three software solutions to improve the stability criteria at the wind turbine level are evaluated, assessing their impact on system performance across various frequency ranges. Additionally, a second solution at the plant level, separate from the software solutions, is also included in the scope of the paper. Moreover, a trade-off analysis was carried out to evaluate these different solutions. Finally, the results showed that the stability criteria can be improved by adopting software solutions without additional costs, but the filter as a plant solution could mitigate the harmonic emission and provide extra reactive power capabilities., This work was funded by the Government of Navarre under Grant 0011-1411-2022-000049 through EnVeNA Project and by grant PID2022-139914OB-I00 funded by MICIU/AEI/10.13039/501100011033/ (Spain) and by ERDF/EU (European Union).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

In depth battery aging analysis: a key to sustainable energy storage in microgrids

  • Nováková, Katerina
  • Berrueta Irigoyen, Alberto
  • Droese, Dominik
  • Knap, Vaclav
  • Kowal, Julia
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
The increasing use of renewable energy makes balancing generation and demand in power systems more challenging. This has led to a growing focus on battery technologies and energy storage solutions. These systems are essential for the effective integration of renewable energy into sustainable power networks. However, most experimental studies of lithium-ion batteries are limited to deep charge and discharge cycles, which do not fully represent how batteries operate in stationary applications. In these applications, batteries experience not only the main charge and discharge processes but also additional stress from current fluctuations due to the variable nature of renewable energy. These smaller cycles, known as micro-cycles, have a depth of discharge of less than 2% and occur alongside the primary charge and discharge processes. This paper presents the results of an experimental study focused on battery aging, considering micro-cycles that emulate real-world conditions for batteries in microgrid storage systems. It demonstrates that the degradation in storage systems occurs differently when compared to deep charge and discharge cycles. It provides a detailed analysis of the degradation processes occurring in microgrid batteries using EIS diagnostics and post-mortem analysis and demonstrates the applicability of the findings for renewable energy systems., This work was supported in part by the Grant Agency of Czech Technical University in Prague under Grant SGS24/136/OHK3/3T/13; in part by the project ‘‘The Energy Conversion and Storage’’ through the Programme Johannes Amos Comenius, call Excellent Research under Project CZ.02.01.01/00/22_008/0004617; in part by the MCIN/AEI/10.13039/501100011033/FEDER under Project PID2022-139914OB-I00; in part by the MCIN/AEI/10.13039/501100011033 under Project UE,TED2021-132457B-I00; and in part by European Union Next Generation EU/PRTR.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

A novel aging modeling approach for second-life lithium-ion batteries

  • Pérez Ibarrola, Ane
  • San Martín Biurrun, Idoia
  • Sanchis Gúrpide, Pablo
  • Ursúa Rubio, Alfredo
The electric mobility industry is booming. In order to reduce the environmental impact of this boom, there is the potential to reuse the batteries from electric vehicles. However, the technical and economic feasibility of the second-life of lithium-ion batteries remains in question. This is due to the intricate non-linear mechanisms that occur during battery degradation, leading to capacity and power loss. Ongoing research aims to create models that can predict the state of battery degradation. However, most studies have focused on the battery's first life, operating within a limited state of health range and requiring constant monitoring of the battery's exposure conditions. While these models provide satisfactory results for the battery's performance in vehicles, they cannot be directly applied to second-life scenarios. In response to this issue, this article proposes a degradation modeling method for second-life batteries based on identifying and linearizing different degradation trends within the battery. This approach allows the application of the model without prior knowledge of the battery's history. It has been validated for a state of health range of 95% to 20%, through both conventional charge-discharge tests and a real-world scenario involving a smart charging station for urban buses. The results obtained with the developed model are overall satisfactory, achieving a MAPE below 3% for capacity and 1.4% for internal resistance in the real-world scenario., This work was supported by grants PID2022-139914OB-I00 funded by MICIU/AEI/10.13039/501100011033/ (Spain) and by ERDF/EU (European Union), TED2021-132457B-I00 funded by MICIU/AEI/10.13039/501100011033/ (Spain) and by the NextGenerationEU/PRTR (European Union), HYBPLANT (0011-1411-2022-000039) and PRIDEBAT (PC24-PRIDEBAT-014-002) funded by the Departamento de Universidad, Innovación y Transformación Digital (Department of University, Innovation and Digital Transformation) of the Goverment of Navarre (Spain), and Lion2H2 (PJUPNA2023-11380) funded by the Public University of Navarre (Spain).