Pasar al contenido principal

LABORATORIO SENSOR EN PUNTA DE FIBRA CON FIGURA DE MERITO MEJORADA PARA DETECCION DE BIOMARCADORES Y CONTAMINANTES EN CONCENTRACIONES ULTRABAJAS

PID2023-149895OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD PUBLICA DE NAVARRA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Beyond single domain sensing: adapting indium tin oxide thin film crystallinity for enhanced optical and electrochemical performance

  • Sezemsky, Petr
  • Simerova, Radka
  • Curda, Pavel
  • González Salgueiro, Lázaro José
  • Tousek, Jirí
  • Písaríková, Aneta
  • Písarík, Petr
  • Kylián, Ondrej
  • Del Villar, Ignacio
  • Smietana, Mateusz
  • Stranak, Vitezslav
Indium tin oxide (ITO) films are commonly applied as transparent electrodes for optoelectronic devices. However, when their optical and electrochemical sensing applications are considered, at best, simultaneous, it is challenging due to contradictory material properties expected in these domains. In this work, we explore the capability to enhance dual-domain performance by tailoring the crystalline properties of ITO thin films when lossy-mode resonance (LMR) and cyclic voltammetry are considered as optical and electrochemical approaches, respectively. First, sputtered amorphous ITO films were processed via controlled thermal annealing, and its impact on crystallite size, charge carrier density, and mobility, as well as optical and electrochemical properties, has been investigated. Our findings reveal that high electron concentration and enhanced mobility, driven by larger crystallites, significantly improve the electrochemical performance, but also significantly change the optical properties. Despite the inherent trade-offs between the optical and electrochemical properties, here we propose a strategy for optimizing properties in both domains, enabling high-sensitivity label-free dual-domain sensing and biosensing., This work resulted from the implementation of the research project GACR 21-0503 K financed by the Czech Science Foundation and project 2020/02/Y/ST8/00030 financed by National Science Centre (NCN), Poland. The research was co-funded by Warsaw University of Technology within the Excellence Initiative: Research University (IDUB) programme. Gratitude also goes to the Polish National Agency for Academic Exchange (NAWA) for financial support within the Ulam NAWA Program (No. BPN/ULM/2023/1/00074), the project PID2023-149895OB-I00 financed by MCIU/AEI/10.13039/501100011033/FEDER,UE, and to the pre-doctoral research grant of the Public University of Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

A review on lossy mode resonance-based sensors: fundamentals and applications

  • Del Villar, Ignacio
  • Imas González, José Javier
  • Matías Maestro, Ignacio
Lossy mode resonance (LMR) sensors have garnered significant attention over the past 20 years due to their high sensitivity, broad applicability, and multiparameter detection capability. This review systematically summarizes progress in theoretical models, experimental validations, and applications during this period. Originating from optical fiber structures and later extended to planar waveguides and integrated circuits, LMR sensors have evolved significantly with the introduction of modeling methods, including geometrical optics and modal analysis. These methods, especially modal analysis, offer a new perspective on LMRs as lossy directional couplers, facilitating deeper understanding of their behavior and guiding sensor design optimization. The performance of LMR-based sensors depends on parameters such as sensitivity and spectral width, which can be optimized to enhance their operation, with applications spanning two primary domains: aqueous media, including biosensors and chemical sensors, and air, with sensors for humidity, gases, and volatile organic compounds (VOCs). In addition, emerging designs, including multi-parameter sensing and integration with other phenomena such as surface plasmon resonances (SPRs) and surface acoustic waves (SAWs), highlight their versatility. Despite challenges like environmental cross-sensitivity and light coupling, advances in temperature compensation and machine learning provide promising pathways for overcoming these limitations, paving the way for next-generation sensing technologies., This work was supported in part by the Spanish Ministry of Science Innovation and Universities through the project PID2023-149895OB-I00 MCIU/AEI/10.13039/501100011033/FEDER,UE and a pre-doctoral research grant.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Simultaneous detection of inflammatory process indicators via operando dual lossy mode resonance-based biosensor

  • Santano Rivero, Desiree
  • Socorro Leránoz, Abián Bentor
  • Giannetti, Ambra
  • Del Villar, Ignacio
  • Chiavaioli, Francesco
Detecting multiple analytes simultaneously, crucial in disease diagnosis and treatment prognosis, remains challenging. While planar sensing platforms demonstrate this capability, optical fiber sensors still lag behind. An operando dual lossy mode resonance (LMR) biosensor fabricated on a D-shaped single-mode fiber (SMF) is proposed for quantification of clinical indicators of inflammatory process, like in COVID-19 infection. Dual LMRs, created via two-step deposition process, yield a nanostructure with distinct SnO2 thicknesses on the flat surface of the fiber. Theoretical and experimental analyses confirm its feasibility, showing a sensitivity around 4500 nm/RIU for both LMRs. A novel insight in spatially-separated biofunctionalization of the sensitive fiber regions is validated through fluorescence assays, showcasing selectivity for different immunoglobulins. Real-time and label-free detection of two inflammatory markers, C-reactive protein and D-dimer, empowers the platform capability with a minimum detectable concentration below 1 μg/mL for both biomolecules, which is of clinical interest. This proof-of-concept work provides an important leap in fiber-based biosensing for effective and reliable multi-analyte detection, presenting a novel, compact and multi-functional analytical tool., I.D.V. acknowledges financial support from the Spanish Agencia Estatal de Investigación (AEI) through project PID2023-149895OB-I00. D.S. also acknowledges a predoctoral research grant from the Public University of Navarra. F.C. acknowledges financial support under the National Recovery and Resilience Plan (NRRP), Mission 4, Component 2, Investment 1.1, Call for tender No. 1409 published on 14.9.2022 by the Italian Ministry of University and Research (MUR), funded by the European Union – NextGenerationEU – Project Title ‘‘Fiber optics sensors as a platform for cancer diagnosis and in vitro model testing” – CUP B53D23024170001 - Grant Assignment Decree No. 1383 adopted on 01/09/2023 by the Italian MUR.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Quasi-lossy mode resonances in long period fiber gratings: achieving linear wavelength shifts with metallic-dielectric thin films

  • González Salgueiro, Lázaro José
  • Del Villar, Ignacio
  • Corres Sanz, Jesús María
  • Matías Maestro, Ignacio
Long-period fiber gratings (LPFGs) are an important structure in the field of optical fiber sensors, recognized for their ability to couple light between core and cladding modes, enabling sensitivity to the surrounding medium. This characteristic has facilitated their application in biosensing, chemical sensing, and environmental monitoring. Over the years, several strategies have been employed to enhance the sensitivity of LPFGs, including cladding diameter reduction, operation at dispersion turning points (DTPs), and the mode transition phenomenon induced by thin films. However, challenges such as non-linear spectral shifts have limited their practical implementation. In this work, we present a detailed experimental and numerical investigation of LPFGs modified with a gold thin film positioned between the cladding and a high-refractive-index TiO¿ layer. This configuration demonstrates improved linearity in the wavelength shifts observed at DTPs and during mode transitions. Experimental results reveal that increasing the gold layer thickness from 15 nm to 30 nm significantly enhances linearity, reducing the quadratic fitting parameter by nearly 50-fold while maintaining high sensitivity. These findings provide a pathway toward more robust and precise LPFG-based sensors with improved spectral response towards practical applications., The authors acknowledge the support of the Agencia Estatal de Investigacion of Spain (PID2023-149895OB-I00); and the pre-doctoral research grant of the Public University of Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

A lossy-mode-resonance-based method for monitoring the evolution of thin-film properties during thermal annealing

  • Sena Riol, Naisa
  • Del Villar, Ignacio
  • Curda, Pavel
  • Stranak, Vitezslav
  • Domínguez Rodríguez, Ismel
  • Smietana, Mateusz
  • Matías Maestro, Ignacio
Real-time monitoring of thin-film evolution during processing is important for optimizing material properties and ensuring device reliability, particularly in harsh conditions such as elevated temperatures, where transient changes may occur. Conventional characterization techniques may provide highly accurate determination of thin-film properties and optical constants, but their direct in situ implementation during thermal treatments in harsh environments is often challenging. Consequently, monitoring is typically limited to ex situ measurements before and after processing, preventing continuous observation of intermediate states. This work presents a simple and low-cost optical method for real-time monitoring of the evolution of thin-film properties during thermal processing using a planar lossy-mode resonance (LMR) configuration. The method is based on the LMR response dependent on the refractive index (n), extinction coefficient (k), and thickness of thin films deposited on glass coverslips that act as planar waveguides. Initial and final spectroscopic ellipsometry measurements were combined with an LMR-based model, enabling the reconstruction of intermediate optical response curves and the estimation of film thickness. The capability of the technique was verified using sputtered indium tin oxide (ITO) thin films during annealing at 200°C, 250°C, and 300°C. The method successfully tracked changes associated with ITO crystallization and the corresponding evolution of optical properties. The calculated thickness values showed good agreement with ex situ ellipsometry measurements, with errors below 4 %. These results confirm the reliability of the model and its suitability for low-cost, in situ monitoring of transparent thin films under conditions where direct ellipsometric measurements are difficult or impossible., This work was supported in part by the Ministerio de Ciencia, Innovación y Universidades (MCIU) /Agencia Estatal de Investigación (AEI) /10.13039/501100011033/FEDER, UE under Grant PID2023-149895OB-I00, in part by the Predoctoral Research Grant of the Public University of Navarra, in part by the Technology Agency of the Czech Republic under Project NCK MATCA TN02000069/007, and in part by Warsaw University of Technology within the Excellence Initiative: Research University (IDUB) Program. The authors acknowledge open access funding provided by Universidad Publica de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Extraordinary sensitivity with quasi-lossy mode resonance mode transition bands in long period fiber gratings

  • González Salgueiro, Lázaro José
  • Del Villar, Ignacio
  • Corres Sanz, Jesús María
  • Matías Maestro, Ignacio
This study presents a novel sensor design utilizing a long-period fiber grating (LPFG) deposited with a TiO2 nanocoating via atomic layer deposition. The study combines theoretical simulations and experimental validation to optimize the grating period and modulation index to operate in the mode transition with a quasi-lossy mode resonance (LMR) behavior, i.e., the LPFG attenuation bands shift similarly to LMRs. This enables the achievement of a remarkable sensitivity of 78 nm/nm, allowing for the detection of sub-angstrom variations in film thickness, which is critical for applications in semiconductor manufacturing. Our setup facilitates continuous monitoring of the transmission spectrum, enabling real-time adjustments during deposition to maximize sensitivity. As proof of concept for the applicability of the sensor as a refractive index sensor, we demonstrated exceptional sensitivity for nitrogen detection, achieving around 10,000 nm/RIU, with a figure of merit of 200. This marks one the highest sensitivities reported for optical fiber gas sensors and suggests this technology could revolutionize the field duet to its simplicity in terms of sensor design., This work was supported in part by the Agencia Estatal de Investigación (AEI) from the Spanish Ministry of Economy and Competitiveness (MCIU/AEI/10.13039/501100011033/FEDER PID2023-149895OB-I00) research fund and by the pre-doctoral research grant of the Public University of Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Regenerable LMR-based fiber optic immunosensor with a SnO2 metallic oxide thin film for label-free detection

  • Santano Rivero, Desiree
  • Zubiate Orzanco, Pablo
  • Socorro Leránoz, Abián Bentor
  • Del Villar, Ignacio
This paper introduces the fabrication and characterization of a regenerable LMR-based, label-free optical fiber immunosensor. This innovative biosensor proposal was developed by functionalizing a SnO2 metallic oxide thin film deposited on a D-shaped optical fiber using a silanization protocol. The system successfully detected IgG - anti-IgG complexes in real-time in a range of concentrations from 0.5 to 10 ¿g/ml and achieved a limit of detection (LoD) of 0.12 μg/ml of anti-IgG. The biosensor was extensively tested to assess its capacity for regeneration, confirming that it can be reused repeatedly, reducing the overall cost and waste typically associated with disposable sensors. This regenerability has significant implications for a range of applications, providing a more sustainable and flexible approach to biosensing technology., This research was funded partially by the Spanish Agencia Estatal de Investigacion (MCIU/AEI/10.13039/501100011033/FEDER) through the project with reference PID2023-149895OB-I00, and also by the Public University of Navarre pre-doctoral research grant.