Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Paths of the cervical instantaneous axis of rotation during active movements-patterns and reliability

  • Venegas, William
  • Inglés, Marta
  • Serra-Añó, Pilar
  • Page Del Pozo, Alvaro Felipe|||0000-0002-5432-310X
[EN] The instantaneous helical axis (IHA) is a characteristic of neck movement that is very sensitive to changes in coordination and that has potential in the assessment of functional alterations. For its application in the clinical setting, normative patterns must be available, and its reliability must be established. The purpose of this work is to describe the continuous paths of the IHA during cyclic movements of flexion-extension (FE), lateral bending (LB), and axial rotation (AR) and to quantify their reliability. Fifteen healthy volunteers participated in the study; two repetitions were made on the same day (by different operators) and over an 8-day interval (by the same operator) to evaluate the inter-operator and inter-session reliability, respectively. The paths described by the IHA suggest a sequential movement of the vertebrae in the FE movement, with a large vertical displacement (mean, 10 cm). The IHA displacement in LB and AR movements are smaller. The paths described by the IHAs have a very high reliability for FE movement, although it is somewhat lower for LB and RA movements. The standard error of measurement (SEM) is less than 0.5 cm. These results show that the paths of the IHA are reliable enough to evaluate changes in the coordination of intervertebral movement., This work was partially supported by the Spanish Government and co-financed by EU FEDER funds (Grant DPI2017-84201-R). The work of W. Venegas was supported by the Escuela Politecnica Nacional de Quito (Proj. PIJ-1508).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A New Method for Time Normalization Based on the Continuous Phase. Application to Neck Kinematics

  • Llopis-Albert, Carlos|||0000-0002-1349-2716
  • Page Del Pozo, Alvaro Felipe|||0000-0002-5432-310X
  • Venegas-Toro, William Ricardo
  • Farhat, Nidal
  • Zamora-Ortiz, Pau
[EN] There is growing interest in analyzing human movement data for clinical, sport, and ergonomic applications. Functional Data Analysis (FDA) has emerged as an advanced statistical method for overcoming the shortcomings of traditional analytic methods, because the information about continuous signals can be assessed over time. This paper takes the current literature a step further by presenting a new time scale normalization method, based on the Hilbert transform, for the analysis of functional data and the assessment of the effect on the variability of human movement waveforms. Furthermore, a quantitative comparison of well-known methods for normalizing datasets of temporal biomechanical waveforms using functional data is carried out, including the linear normalization method and nonlinear registration methods of functional data. This is done using an exhaustive database of human neck flexion-extension movements, which encompasses 423 complete cycles of 31 healthy subjects measured in two trials of the experiment on different days. The results show the advantages of the novel method compared to existing techniques in terms of computational cost and the effectiveness of time-scale normalization on the phase differences of curves and on the amplitude of means, which are assessed by Root Mean Square (RMS) values of functional means of angles, angular velocities, and angular accelerations. Additionally, the confidence intervals are obtained through a bootstrapping process., This research was funded by the Spanish Government and co-financed by EU FEDER funds (Grant DPI2017-84201-R) and by Escuela Politecnica Nacional de Quito (Grant PIJ-1508).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Análisis del eje instantáneo de rotación del movimiento de flexo-extensión del cuello mediante video análisis: fiabilidad y análisis de errores, Analysisi of the instantaneus axis of the neck flexion-extension movement by means of video analysis: reliability and error analysis

  • Venegas-Toro, William
  • Zambrano, Ivan
  • Ruiz, Cristopher
  • Page Del Pozo, Alvaro Felipe|||0000-0002-5432-310X
[ES] El objetivo del trabajo es evaluar la fiabilidad para medir el eje de rotación instantáneo (EIR) del raquis cervical de sujetos sanos mediante una técnica de video análisis de bajo coste y diseñar una técnica que minimice los errores. Los datos fueron obtenidos a partir de marcadores técnicos y anatómicos ubicados en 7 sujetos sanos, con tres sesiones experimentales por sujeto, medidas por dos operadores distintos. El movimiento se registró mediante la cámara de vídeo de un smartphone, a 30 fps. Los videos fueron analizados mediante el software libre Tracker, y los cálculos cinemáticos (posiciones, velocidades, aceleraciones y EIR) se realizaron con software propio desarrollado en MATLAB. Se realizó un análisis de fiabilidad calculando el coeficiente de correlación intraclase (ICC) y el error estándar medio (SEM) entre operador y entre sesión. Los valores obtenidos para el SEM e ICC son aceptables o buenos, mostrando las posibilidades del uso de técnicas de bajo coste en aplicaciones biomecánicas, lo que abre posibilidades muy interesantes en campos como la valoración funcional., [EN] The objective of this work is to evaluate the reliability of the measurement of the instantaneous axis of rotation (EIR) of the cervical spine by means of a video analysis technique of low cost, as well as to design a technique that minimizes the errors. The information was obtained from technical and anatomical markers located in 7 healthy subjects, with three experimental sessions for subject, measured by two different operators. The movement registered by means of the video camera of a smartphone, to 30 fps. The videos were analyzed by means of the free software Tracker, and the kinematic calculations (positions, speeds, accelerations and EIR) were realized by proper software developed in MATLAB. A reliability analysis was realized calculating the intraclass correlation coefficient (ICC) and the standard error mean (SEM) between operator and between sessions. The values obtained for the SEM and ICC are acceptable or good, showing the possibilities of the use of techniques of low cost in biomechanical applications, what opens very interesting possibilities in fields like the functional assessment., Este trabajo ha sido financiado por Escuela Politécnica Nacional de Quito, Ecuador bajo el proyecto conjunto de investigación junior PIJ-15-08 con la Universitat Politècnica de València