Pasar al contenido principal

DISEÑO Y CARACTERIZACION DE LA APARIENCIA VISUAL DE PRODUCTOS

RTI2018-096000-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Halloysite and Laponite Hybrid Pigments Synthesis with Copper Chlorophyll

  • Micó-Vicent, B.|||0000-0001-8845-1495
  • Jordán-Núñez, Jorge|||0000-0001-8178-9987
  • Perales Romero, Esther
  • Viqueira, Valentín
[EN] Sustainable and green materials have been studied in dye and pigment productions to reduce their environment impacts from being produced and applied. Although natural dyes are an excellent choice to move from agrowaste, some improvements must be made before they are applied given their poor fastness. One way of improving natural dye properties is their adsorption into nanoclay structures to give hybrid pigments. This work used tubular halloysite and laminar laponite to adsorb and stabilize natural copper chlorophyll. With a statistical design of experiments, we observed interactions between synthesis factors, such as pH, ionic strength, and surfactant or silane modification. Cool hybrid pigments with high TSR (%) values and a wide color range were obtained by using dispersions with only distilled water at room temperature. Successful chlorophyll adsorption on both nanoclay surfaces took place by XRD and DTA analyses. The maximum natural dye absorption for both nanoclay types took place under acid conditions, pH 3¿4, and in the presence of mordant. The TSR (%) improved by the silane pH interaction, and halloysite hybrid pigments obtained higher TSR values than the laponite ones. Finally, a wide chromatic green color range was obtained with the surfactant modification in both nanoclays, and the color fastening was also improved in the hybrid pigments application. The samples generated with 10% of hybrid pigments from both nanoclays and an Epoxy bioresin, show higher colorfastness than the sample with the natural chlorophyll, due to the nanoclays¿dye interaction and protection., To the Spanish Ministry of Economy and Competitiveness for funding the project entitled: Diseño y caracterización de la apariencia visual de productos (REF: RTI2018-096000-B-100).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Using Laminar Nanoclays for Phycocyanin and Phycoerythrin Stabilization as New Natural Hybrid Pigments from Microalgae Extraction

  • Micó-Vicent, B.|||0000-0001-8845-1495
  • Jordán-Núñez, Jorge|||0000-0001-8178-9987
  • Perales Romero, Esther
  • Bermejo, Ruperto
  • Viqueira, Valentín
  • Pérez, Jorge
[EN] C-Phycocyanin (PC) and B-phycoerythrin (PE) are light-harvesting water-soluble phycobiliproteins from microalgae that belong mainly to the cyanobaceria and rhodhophytes families. Different methods have been developed for PC and PE extraction and purification from microalgae, and offer a high potential for their use as additives in sectors such as food and cosmetics. However, the main limitations of using these dyes are the sensitivity of their environmental factors, such as light fastness, temperature, and pH. We successfully employed safe lamellar nanoclays such as montmorillonite (M) and Laponite (L) for phycobiliproteins stabilization, as we did before with other natural dyes. We obtained a wide color gamut from blues to pink by combining four different factors under synthesis conditions: three dye concentrations; two laminar nanoclay sizes; a two nanoclay surface modifiers combination with cetylpyridinium bromide (CPB) and a coupling agent (3-Aminopropyl) triethoxysilane. The experimental conditions were defined according to a multilevel factorial design of experiment (DOE) to study the factors interacting in the final hybrid pigment characteristics. In both M and L, the d001 distance (nm) increased due to PC and PE adsorption. The best conditions to increase the basal space depend on the nanoclay structure, and it is better to use the surfactant for M, and silane modification for L. In addition, optical and thermal PE and PC properties significantly improved. We show the optimal synthesis conditions to increase PC and PE adsorption using the high dye concentration, with surfactant and silane depending on the nanoclay. The hybrid pigments from these phycobiliproteins offer the opportunity to perform several industrial applications, including in polymer additives, cosmetics, and packaging., FundingThis research was funded by Spanish Ministry of Economy and Competitiveness (Project RTI2018-096000-B-100).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluating the Graininess Attribute by Visual Scaling for Coatings with Special-Effect Pigments

  • Perales, Esther
  • Huraibat, Khalil
  • Viqueira, Valentín
  • Micó-Vicent, B.|||0000-0001-8845-1495
[EN] In our society, objects' visual appearance is an essential factor because it allows us to recognize and differentiate one object from another. In different industrial sectors like cosmetics, textiles and automotive, special-effect pigments are largely used to achieve attractive visual features. These pigments provide a color change with viewing and illumination direction, and visually provide texture. Depending on a finish's properties, and also on the viewing and illumination conditions, coatings exhibit sparkle or a graininess-like texture. Currently, not many scientific works on the visual perception of these texture effects can be found in the literature. In addition, choice of experimental method can influence the measurement scale obtained from visual data. For this reason, the purpose of this work was to analyze graininess visual scaling constructed by two different psychophysical methods. The experimental design was based on the rank-order and paired-comparison methods. The data analysis was conducted by following the law of comparative judgments to obtain a visual scale of the graininess attribute to compare it to instrumental data. A good correlation appeared between both magnitudes with a correlation coefficient close to 0.9. Both methods provided useful results with a reasonable correspondence between them, which ensures that data can be considered reliable, while the visual obtained scale can act as a good graininess scale perceived by the human visual system., This research was funded by EMRP, grant number 16NRM08, and by the Ministerio de Ciencia, Innovacion y Universidades, grant number RTI2018-096000-B-I00.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Preliminary measurement scales for sparkle and graininess

  • Ferrero, Alejandro
  • Perales, E.
  • Basic, N.
  • Pastuschek, M.
  • Porrovecchio, G.
  • Schirmacher, A.
  • Velázquez, J.L.
  • Campos Acosta, Joaquín
  • Martínez-Verdú, F.M.
  • Šmid, M.
  • Linduska, P.
  • Dauser, Thomas
  • Blattner, P.
12 pags., 4 figs., Large effect pigments, widely used in various fields of industrial applications, produce characteristic visual textures known as sparkle and graininess, which need to be quantified by objective or subjective methods. The development of preliminary measurement scales for sparkle and graininess, whose recommendation is now under discussion in the International Commission on Illumination (CIE), is described in this article. These scales are absolute, linear and traceable to standards of optical radiation metrology. The main purpose of this article is to justify the convenience of adopting these preliminary measurements scales, showing clear evidence that they correlate well with subjective evaluations. Before standardization, these scales need to be validated with more experimental data, including different specimens and experimental systems from other research groups., Ministerio de Ciencia, Innovación y Universidades (RTI2018-096000-B-I00); EURAMET and the European Union (16NRM08)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Accurate physics-based digital reproduction of effect coatings

  • Huraibat, Khalil
  • Perales, Esther
  • Kirchner, Eric
  • Van der Lans, I.
  • Ferrero, Alejandro
  • Campos Acosta, Joaquín
13 pags., 7 figs., 1 tab., We built an improved 3D rendering framework to accurately visualize the complete appearance of effect coatings, including metallic effects, sparkle and iridescence. Spectral reflectance measurements and sparkle indexes from a commercially available multi-angle spectrophotometer (BYKmac-i) were used together with physics-based approaches, such as flake-based reflectance models, to implement efficiently the appearance reproduction from a small number of bidirectional measurement geometries. With this rendering framework, we rendered a series of effect coating samples on an iPad display, simulating how these samples would be viewed inside a Byko-spectra effect light booth. We validated the appearance fidelity through psychophysical methods. We asked observers to evaluate the most important visual attributes that directly affect the appearance of effect coatings, i.e., the color, the angular dependence of color (color flop) and the visual texture (sparkle and graininess). Observers were asked to directly compare the rendered samples with the real samples inside the Byko-spectra effect light booth. In this study, we first validated the accuracy of rendering the color flop of effect coatings by conducting two separate visual tests, using flat and curved samples respectively. The results show an improved accuracy when curved samples were used (acceptability of 93% vs 80%). Secondly, we validated the digital reproduction of both color and texture by using a set of 30 metallic samples, and by including texture in the rendering using a sparkle model. We optimized the model parameters based on sparkle measurement data from the BYK-mac I instrument and using a matrix-adjustment model for optimization. The results from the visual tests show that the visual acceptability of the rendering is high at 90%., Ministerio de Economía y Competitividad (FPIBES-2016-077325, RTI2018-096000-B-I00).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Visual validation of the appearance of chromatic objects rendered from spectrophotometric measurements

  • Huraibat, Khalil
  • Perales, Esther
  • Kirchner, Eric
  • Van der Lans, I.
  • Ferrero, Alejandro
  • Campos Acosta, Joaquín
9 pags., 11 figs., 1 tab., We validate a physically based and spectral rendering framework with improved color reproduction. With a recently developed model, we take into account both the colorimetric specifications of the rendering display as well as the spectral and angular characteristics of lighting and also the spectral reflectance of the objects. Therefore, it should provide much better color reproduction than those based on the common standard red, green, blue (sRGB) color space. In addition, it allows real-time rendering on modest hardware and displays. We evaluated the color reproduction of the new rendering framework by psychophysical tests using spectrophotometric measurements of 30 chromatic paint samples. They were rendered on an iPad display, as viewed inside the Byko-spectra effect light booth. We asked 16 observers to evaluate the color match by directly comparing the rendered samples with the physical samples, using two different psychophysical assessment methods. The color reproduction was found to be strongly improved with respect to results obtained with default sRGB color encoding space. The average color reproduction match was found to be equivalent to 1E = 1.6, which is a small but noticeable color difference. In 80% of the visual assessments, the color reproduction was described as being at least as good as between “differencevisible but still acceptable” and “difference visible, doubtful match.”, Ministerio de Economía y Competitividad (FPI BES-2016-077325, RTI2018-096000-B-I00).