Repositori Obert UdL
Publicación
Artículo científico (JournalArticle)
Performance of PCM-Enhanced Cementitious Composites and Textile-Reinforced Walls: Mechanical Characterization and OpenFOAM Numerical Investigation for Energy-Efficient Buildings
This study investigates the integration of phase change materials (PCMs) and recycled textile fibers into cementitious composites to improve the thermomechanical performance and energy efficiency of building envelopes. Experimentally, eco-efficient mortars were developed by partially replacing sand with recycled textile fibers (0–40% by volume) and microencapsulated PCM (0–30% by volume) across sixteen distinct formulations. The fresh-state workability, apparent density, compressive strength, and flexural strength were systematically characterized after 28 days of curing. Results show that while PCM addition lowers composite density and mechanical resistance, textile fibers effectively mitigate compressive strength loss and enhance flexural strength by up to 70% through crack-bridging mechanisms. Numerically, an open-source conjugate heat transfer (CHT) framework was developed in OpenFOAM using the chtMultiRegionFoam solver and a temperature-dependent apparent heat capacity formulation to simulate the thermal response of concrete walls lined with an inner textile-reinforced mortar (TRM) skin. The numerical framework was experimentally validated against the literature’s benchmark data, reproducing diurnal surface temperature profiles with high fidelity. A parametric investigation of the inner composite skin thickness (2, 4, and 6 mm in the numerical model, corresponding to 20, 40, and 60 mm prototype layers) was conducted. The analysis reveals that incorporating a PCM-loaded TRM skin dampens internal thermal swings, lowers the required cooling demand, and reduces occupant thermal stress by over 20% compared to plain concrete. This integrated approach establishes an eco-efficient route for valorizing industrial textile waste while embedding passive thermal regulation directly within structural envelopes., This study was supported by the Thermal Processes Laboratory of the Research and Technology Center of Energy (CRTEn) and the University of Tunis El Manar in Tunisia. This work is partially supported by ICREA under the ICREA Academia programme. The authors would like to thank the Departament de Recerca i Universitats of the Catalan Government for the quality accreditation given to their research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This paper is part of the RYC2023-044196-I, funded by MCIU/AEI/10.13039/501100011033 and FSE+.