Pasar al contenido principal

TECNOLOGIAS PARA SENSORES DE FIBRA OPTICA I

TEC2010-20224-C02-01

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD PUBLICA DE NAVARRA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Compound Lasing Fiber Optic Ring Resonators for Sensor Sensitivity Enhancement

  • Rota Rodrigo, Sergio
  • González Herráez, Miguel|||0000-0003-2555-2971
  • López Amo, M.
In this study, a new method for increasing simultaneously the sensitivity and interrogation stability of fiber-optic intensity sensors is presented. The configuration is based on a double-coupler ring resonator. On one side, the attenuation sensitivity of the sensor is enhanced by placing it inside a ring resonator. On the other side, the stability of the interrogation method is widely improved by creating an external lasing ring resonator with matched spectral response. The combination of the wavelength selective response of the ring resonator and optical amplification from Er-doped fiber amplifier is used to create different fiber lasers. The resulting lasers present an impressive sensitivity enhancement and a dynamic range increment up to 15 dB. Simultaneously, the instability of the system is reduced to ±0.05 dB. In comparison with systems based on tunable laser interrogation, our method is >100 times more stable and also simpler, as no wavelength tunable elements are required., Ministerio de Economía y Competitividad, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Compound lasing fiber optic ring resonators for sensing

  • Rota Rodrigo, Sergio
  • González Herráez, Miguel|||0000-0003-2555-2971
  • López Amo, M.
In this work, we present a new method for increasing simultaneously the sensitivity and interrogation stability of fiberoptic intensity sensors. The configuration is based on a double-coupler ring resonator. On one side, the attenuation sensitivity of the sensor is enhanced by placing it inside a ring resonator. On the other side, the stability of the interrogation method is rendered close to perfect by creating an external lasing ring resonator with matched spectral response. The resulting lasers allow the stable interrogation of the sensors with an impressive sensitivity enhancement. In our experiments, the dynamic range of the intensity sensor (and consequently its sensitivity) is increased 15 dB by using this laser-based interrogation system. Simultaneously, the instability of the system is reduced to ±0.05 dB. In comparison with systems based on external interrogation, our method is <100 times more stable and also simpler, as no wavelength tunable elements are required., Ministerio de Ciencia e Innovación, Ministerio de Economía y Competitividad, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Slow-light and enhanced sensitivity in a displacement sensor using a lossy fiber-based ring resonator, Slow-light assisted displacement sensor using a lossy fiber-based ring resonator

  • Bravo, M.
  • Angulo Vinuesa, Xabier
  • Martín López, Sonia|||0000-0001-5203-6206
  • López-Amo, M.
  • González Herráez, Miguel|||0000-0003-2555-2971
Along the last years, much debate has been done on the efficiency of slow-light phenomena in order to enhance light-matter interactions, especially for sensing purposes. This improvement could be key to develop more compact and sensitive devices. In this work we develop an all-fiber sub-micrometric displacement sensor using slow-light sensitivity enhancement in a lossy ring resonator. In the proposed structure the losses produced by the displacement of a mechanic transducer can be translated into strong variations of group index and therefore strong transmittance variations. We show that this effect is strictly related to slow light, and not related to confinement effects or any other., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid, Ministerio de Ciencia e Innovación
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Phasorial differential pulse-width pair technique for long-range Brillouin optical time-domain analysis sensors

  • Urricelqui Polvorinos, Javier
  • Sagüés García, Mikel
  • Loayssa Lara, Alayn
We introduce a novel phasorial differential pulse width pair (PDPP) method for Brillouin optical time domain analysis (BOTDA) sensors that combines spatial resolution enhancement with increased tolerance to non local effects. It is based on the subtraction of the complex time domain traces supplied by a sensor configuration that uses a phase modulated probe wave and RF demodulation. The fundamentals of the technique are first described theoretically and using numerical simulation of the propagating waves. Then, proof of concept experiments demonstrate the measurement of the Brillouin frequency shift distribution over 50 km. The system is shown to withstand large variations of the pump power generated by its interaction with a powerful probe wave along the fiber; hence, highlighting the potential of the PDPP technique to increase the detected signal to noise ratio in long range BOTDA. Moreover, the PDPP is also shown to increase the measurement contrast by allowing the use of relatively long duration pulses while retaining 1 m spatial resolution., The authors wish to acknowledge the financial support from the Spanish Ministerio de Ciencia e Innovación through the project TEC2010-20224-C02-01 and from the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Application of remote power-by-light switching in a simplified BOTDA sensor network

  • Bravo Acha, Mikel
  • Zornoza Indart, Ander
  • Loayssa Lara, Alayn
  • López-Amo Sáinz, Manuel
  • López Higuera, José Miguel
  • Ullán Nieto, Ángel
We propose and demonstrate the use of spatial multiplexing as a means to reduce the costs of distributed sensing networks. We propose a new scheme in which remote power-by-light switching is deployed to scan multiple branches of a distributed sensing network based on Brillouin Optical Time Domain Analysis (BOTDA) sensors. A proof-of-concept system is assembled with two 5-km sensor fiber branches that are alternatively monitored using a fast remotely controlled and optically powered optical switch. The multiplexed distributed sensor fibers were located 10 km away from the interrogation unit and a Raman pump is used to remotely power the switch. Furthermore, the deployed BOTDA unit uses an alternative configuration that can lead to simplified setups., This work was supported by the Spanish Government projects TEC2010-20224-C01 and TEC2010-20224-C02.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Multiwavelength Raman fiber lasers using Hi-Bi photonic crystal fiber loop mirrors combined with random cavities

  • Rodrigues Pinto, Ana Margarida
  • Frazão, Orlando
  • Santos, José Luís
  • López-Amo Sáinz, Manuel
Different multiwavelength Raman fiber lasers based on a hybrid cavity set-up are proposed. The lasing schemes are based in highly birefringent photonic crystal fiber loop mirrors combined with random cavities. The Hi-Bi PCF loop mirrors are characterized by an interferometric output; whereas the random mirrors are created by cooperative Rayleigh scattering due to Raman gain. This configuration allows suppression of Rayleigh associated noise growth, while taking advantage of it as an active part of the laser cavity, enhancing the achievable gain. The proposed fiber lasers present stable operation at room temperature although different output maxima and shapes depending on the fiber loop mirror/random mirror combination., The authors are grateful to the Spanish Government project TEC2010-20224-C02-01 and European COST action TD 1001.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Micro-displacement sensor based on a hollow-core photonic crystal fiber

  • Rodrigues Pinto, Ana Margarida
  • López-Amo Sáinz, Manuel
  • Baptista, José Manuel
  • Santos, José Luís
  • Frazão, Orlando
A sensing head based on a hollow-core photonic crystal fiber for in-reflection measurement of micro-displacements is presented. The sensing structure takes advantage of the multimodal behavior of a short segment of hollow-core photonic crystal fiber in-reflection, being spliced to a single mode fiber at its other end. A modal interferometer is obtained when the sensing head is close to a mirror, through which displacement is measured., The authors are grateful to the Spanish Government project TEC2010-20224-C02-01 and the European COST Action TD1001.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

BOTDA measurements tolerant to non-local effects by using a phase-modulated probe wave and RF demodulation

  • Urricelqui Polvorinos, Javier
  • Sagüés García, Mikel
  • Loayssa Lara, Alayn
We demonstrate a Brillouin optical time domain analysis sensor based on a phase modulated probe wave and RF demodulation that provides measurements tolerant to frequency dependent variations of the pump pulse power induced by non local effects. The tolerance to non local effects is based on the special characteristics of the detection process, which provides an RF phase shift signal that is largely independent of the Brillouin gain magnitude. Proof of concept experiments performed over a 20 km long fiber demonstrate that the measured RF phase shift spectrum remains unaltered for large frequency dependent deformations of the pump pulse power. Therefore, it allows the use of a higher optical power of the probe wave, which leads to an enhancement of the detected signal to noise ratio. This can be used to extend the sensing distance, to improve the accuracy of the Brillouin frequency shift measurements, and to reduce the measurement time., The authors wish to acknowledge the financial support from the Spanish Ministerio de Educación y Ciencia through the project TEC2010-20224-C02-01, from the Spanish Ministerio de Economía y Competitividad through the project IPT-2011-12-920000 and from the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Optical fiber networks for remote fiber optic sensors

  • Fernández Vallejo, Montserrat
  • López-Amo Sáinz, Manuel
This paper presents an overview of optical fiber sensor networks for remote sensing. Firstly, the state of the art of remote fiber sensor systems has been considered. We have summarized the great evolution of these systems in recent years; this progress confirms that fiber-optic remote sensing is a promising technology with a wide field of practical applications. Afterwards, the most representative remote fiber-optic sensor systems are briefly explained, discussing their schemes, challenges, pros and cons. Finally, a synopsis of the main factors to take into consideration in the design of a remote sensor system is gathered., This work was supported by the Spanish Government project TEC2010-20224-C02-01.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Robust fiber-optic sensor networks

  • Pérez Herrera, Rosa Ana
  • Fernández Vallejo, Montserrat
  • López-Amo Sáinz, Manuel
The ability to operate despite failure will become increasingly important as the use of optical sensor networks grows, and the amount of sensing information to be handled by a sensor network is increasing, especially for safety and security applications. In this review, the four categories of protection to allow service to be reestablished after a failure (dedicated/shared and line/path) are thoroughly discussed. This paper also presents an overview of the most representative robust fiber-optic sensor systems, discussing their schemes, pros and cons., The authors are grateful to the Spanish Government project TEC2010-20224-C02-01.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Synthesis of Brillouin frequency shift profiles to compensate non-local effects and Brillouin induced noise in BOTDA sensors

  • Urricelqui Polvorinos, Javier
  • Sagüés García, Mikel
  • Loayssa Lara, Alayn
We present a novel technique for Brillouin optical time domain analysis (BOTDA) sensors that simultaneously compensates non local effects and reduces Brillouin noise. The technique relies on the wavelength modulation of the optical source to modify the Brillouin interaction between probe and pump waves during their propagation. The resulting Brillouin distribution mimics the wavelength modulation, creating a virtual Brillouin frequency shift profile along the sensing fiber. The fundamentals of the technique are first described theoretically and using numerical simulations. Then, proof of concept experiments demonstrate the capabilities of the system to reduce large variations of the pump power resulting from the interaction with high probe powers and to decrease the Brillouin induced noise enhancing the signal to noise ratio (SNR) of the system. Furthermore, we show, for the first time to our knowledge, measurements of the Brillouin distribution using an injected optical power higher than the Brillouin threshold of the fiber., The authors wish to acknowledge the financial support from the Spanish Ministerio de Ciencia e Innovación through the project TEC2010-20224-C02-01 and from the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Dynamic BOTDA measurements based on Brillouin phase-shift and RF demodulation

  • Urricelqui Polvorinos, Javier
  • Zornoza Indart, Ander
  • Sagüés García, Mikel
  • Loayssa Lara, Alayn
We demonstrate a novel dynamic BOTDA sensor based, for the first time to our knowledge, on the use of the Brillouin phase shift in addition to the conventional Brillouin gain. This provides the advantage of measurements that are largely immune to variations in fiber attenuation or changes in pump pulse power. Furthermore, the optical detection deployed leads to an enhanced precision or measurement time and to the broadening of the measurement range. Proof of concept experiments demonstrate 1.66 kHz measurement rate with 1 m resolution over a 160 m sensing fiber length. Moreover, a measurement range of 2560 µε with a precision of 20 µε is successfully proved., The authors wish to acknowledge the financial support from the Spanish Ministerio de Educación y Ciencia through the project TEC2010-20224-C02-01 and from the Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Dual stage ytterbium doped fiber laser in MOPA configuration

  • Fernández Vallejo, Montserrat
  • Monelli, D.
  • Passaro, D.
  • Cucinotta, A.
  • Selleri, S.
  • López-Amo Sáinz, Manuel
We report the experimental demonstration of an Ytterbium doped fiber laser (YDFL) composed by two stages in cascade. Two sorts of Ytterbium doped fiber (YDF) with different concentration have been used. A proper characterization of the YDFs has been performed in order to find the optimum YDF length. To this end, the output power and the slope-efficiency have been calculated and the signal amplification and the amplified spontaneous emission (ASE) spectra have been analyzed, which are strictly related to the absorption and emission cross-section of the YDF. The first stage has been studied for both continuous wave (CW) and pulsed regime. The results show that by using an YDF with a high slope-efficiency, up to 66%, it is possible to reach an emitted peak power of 30 W in a pulsed regime., This work was supported by the Spanish Government projects TEC2007-67987-C02 and TEC2010-20224-C02-01, the European COST action-299 and the Spain-Italy Cooperation Project “Development of new all-fiber lasers for telecom, sensors and industrial applications”.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Remote-time division multiplexing of bending sensors using a broadband light source

  • Bravo Acha, Mikel
  • López-Amo Sáinz, Manuel
This work experimentally demonstrates a remote sensing network which interrogates bending sensors using time-division multiplexing techniques and a broadband light source. The bending sensors are located 50 km away from the monitoring station. They are based on a simple tie displacement sensor and offer high-resolution measurements of displacement., The authors are grateful to the Spanish Government Project TEC2010-20224-C02-01.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

An in-reflection strain sensing head based on a Hi-Bi photonic crystal fiber

  • Rota Rodrigo, Sergio
  • Rodrigues Pinto, Ana Margarida
  • Bravo Acha, Mikel
  • López-Amo Sáinz, Manuel
A photonic crystal fiber-based sensing head is proposed for strain measurements. The sensor comprises a Hi-Bi PCF sensing head to measure interferometric signals in-reflection. An experimental background study of the sensing head is conducted through an optical backscatter reflectometer confirming the theoretical predictions, also included. A cost effective setup is proposed where a laser is used as illumination source, which allows accurate high precision strain measurements. Thus, a sensitivity of ~7.96 dB/me was achieved in a linear region of 1,200 μe., The authors are grateful to the Spanish government projects TEC2010-20224-C02-01 and Innocampus.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Fiber optic and KNX sensors network for remote monitoring a new building cladding system

  • Unzu Ripoll, Ruth
  • Nazábal Urriza, Juan Antonio
  • Vargas Silva, Gustavo Adolfo
  • Hernández, Rufino
  • Fernández Valdivielso, Carlos
  • Urriza Ezcurra, Nuria
  • Galarza Galarza, Marko
  • López-Amo Sáinz, Manuel
Acceso cerrado a este documento. No se encuentra disponible para la consulta pública. Depositado en Academica-e para cumplir con los requisitos de evaluación y acreditación académica del autor/a (sexenios, acreditaciones, etc.)., This paper shows the utilization of a fiber optic sensor network for monitoring the behavior of the enclosure of a telecommunication tower. Such enclosure is composed by double monolithic glass panels filled with an alveolar type polycarbonate structure. These fiber optic sensors are also integrated with a fiber optic accelerator and various building automation KNX sensors into a custom developed Building Management System for remote monitoring the structural health of the building. Results related to the measurements recorded into the glass alveolar panel have been used for assessing the structural reliability of the panel, under thermal and mechanical working conditions., This work was supported by the Spanish Government under grants TEC2007-67987-C02-02 and TEC2010-20224-C02-01 and grant IIM010566.RI1 from the Government of Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Photonic crystal fibers for sensing applications

  • Rodrigues Pinto, Ana Margarida
  • López-Amo Sáinz, Manuel
Photonic crystal fibers are a kind of fiber optics that present a diversity of new and improved features beyond what conventional optical fibers can offer. Due to their unique geometric structure, photonic crystal fibers present special properties and capabilities that lead to an outstanding potential forsensing applications. A review of photonic crystal fiber sensors is presented. Two different groups of sensors are detailed separately: physical and biochemical sensors, based on the sensor measured parameter. Several sensors have been reported until the date, and more are expected to be developed due to the remarkable characteristics such fibers can offer., The authors are grateful to the Spanish Government project TEC2010-20224-C02-01.