Pasar al contenido principal

EVALUACION NUMERICA Y EXPERIMENTAL DE EFECTOS ELECTROMAGNETICOS AMBIENTALES EN AVIONES NO TRIPULADOS

TEC2016-79214-C3-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario INSTITUTO NACIONAL DE TECNICA AEROESPACIAL ESTEBAN TERRADAS (INTA)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Design of a planetary protection cover for EMC testing of a spacial magnetic sensor

  • Fernández Romero, S.
  • Muñóz Rebate, I.
  • León Calero, Marina
  • Martín Iglesias, Santiago
  • Escot Bocanegra, D.
  • Jiménez Lorenzo, María
  • López Sanz, Daniel
  • Parrondo, María Concepción
  • Díaz Michelena, Marina
  • Plaza Gallardo, Borja
  • Poyatos Martinez, David
This paper explains the research process carried out for the development and manufacture of the planetary protection cover for carrying out the electromagnetic compatibility (EMC) tests of the an-isotropic magneto-resistance (AMR) sensor of the ExoMars 2020 mission. This mission has strict bioburden requirements. The electromagnetic properties of several materials have been analyzed in order to study their transmission coefficient and the innovation of this project is the use of fused deposition modeling (FDM) technology as manufacturing method. Additive manufacturing is presented as a promising technology in the field of radiofrequency since it can use a wide range of polymeric materials (thermoplastics) with low transmission coefficient. Observing the electromagnetic (EM) characterization results, it was decided to manufacture a protective cover using FDM technology, because it allows control over the grounding of the instrument and facilitates the integration, cleaning and protection against impacts during the manipulation, with great versatility and low cost. Finally, the cover has been verified during the acceptance EMC tests of the flight model AMR instrument., This work has received funding from the Ministerio de Econom´ıa, Industria y Competitividad (MEIC) Projects TEC2016-79214-C3-1-R, ESP2015-70184-R and ESP2017- 88930-R., Preprint
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Limitations in the Shielding Effectiveness Measurement Methods for Carbon Fiber Composites

  • Plaza Gallardo, Borja
  • Fernández Romero, Sergio
  • Poyatos Martinez, David
  • Gómez de Francisco, Patricia
  • Muñoz Rebate, I.
  • Ramos Somolinos, D.
Novel materials, as multi-ply carbon fiber composites (CFC), are increasingly used in the industry due to their outstanding mechanical properties in relation to their weight. In this regard, from the standpoint of electromagnetic compatibility (EMC), shielding effectiveness (SE) is a key parameter that often determines the scope for application of a given material. This article addresses the application of two complementary standards, ASTM D4935 and IEC 61000-4-21, to the SE measurement of different CFC test samples with more than 10 layers and a very large expected shielding. The analysis of the limitations encountered and the description of applied improvements on the traditional measurement procedures on each method are also included, showing promising results. On the other hand, there are alternative methods to evaluate the SE of CFC based on their DC square resistance. Consequently, and forthe shake of completeness, a novel setup for high precision measurement of the DC square resistance of CFC samples is also described along the article., The work described in this paper has been funded by the Spanish Ministry of Science and Innovation (MICINN) under projects UAVE3 (TEC2016-79214-C3-1-R) and eSAFE-UAV (PID2019-106120RB-C32)., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Electromagnetic Characterization of Materials Through High Accuracy Free Space Measurements

  • Poyatos Martinez, David
  • Plaza Gallardo, Borja
  • Ramos Somolinos, D.
Aerospace or automotive industries employ novel composite or 3D printed materials in their manufacturing processes to improve performance and reduce costs. Obtaining the electromagnetic (EM) characterization of these materials or a combination of them is essential to ensure safety and EM compatibility. In this paper, the development of a test bench with rod antennas for measurements in free space is presented. A complete design is described, from simulation analysis to validation measurements. The aim is to achieve robust measurements which allow the EM characterization of very diverse samples and materials, and high accuracy results that make possible to know the exact EM behaviour of these materials., The work described in this paper has been funded by the Spanish Ministry of Science and Innovation (MICINN) under projects UAVE3 (TEC2016-79214-C3-1-R) and eSAFE-UAV (PID2019-106120RB-C32)., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Comparing Open Area Test Site and Resonant Chamber for Unmanned Aerial Vehicle's High-Intensity Radiated Field Testing

  • Fernández Romero, S.
  • López Rodríguez, P.
  • Escot Bocanegra, D.
  • Poyatos Martinez, David
  • Añón Cancela, M.
Open area test sites (OATS) have been traditionally employed for aircraft electromagnetic compatibility certification tests because of the large size of these items. In this regard, unmanned aerial vehicles (UAVs) have emerged in the last years and, albeit being sometimes notably smaller, yet they have to accomplish for the same certification process. This paper investigates into the possibility of using a reverberation chamber for performing two aircraft low-level coupling tests, namely, low-level direct drive and low-level swept fields, and compares the results with those obtained in an OATS, in both cases using a representative part of a UAV., Spanish MINECO (Grant Number: TEC2013-48414- C3-2-R and TEC2016-79214-C3-1-R), Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

On the Design of a Planetary Protection Shell for EMC Testing on Space Equipment

  • Fernández Romero, Sergio
  • Muñoz Rebate, I.
  • Jiménez Lorenzo, María
  • Plaza Gallardo, Borja
  • Poyatos Martinez, David
  • Díaz Michelena, Marina
INSPEC Accession Number: 19976292, This letter addresses on the design of a planetary protection shell for performing the Electro-Magnetic Compatibility (EMC) tests of the Anisotropic Magneto-Resistance (AMR) sensor of the ExoMars mission. This mission has strict bio-burden requirements. The ElectroMagnetic (EM) properties of several materials have been investigated for measuring their transmission coefficients and the novelty of this letter is the use of Fused Deposition Modeling (FDM) technology as the production method. Additive manufacturing is presented as a promising technology in the field of radiofrequency since it can use a wide range of materials (including thermoplastics) with high and low transmission coefficient. The investigation comprises the analysis of the electromagnetic properties of several 3D printer materials in order to study their transmission coefficients. Seeing the EM characterization results, it was decided to produce a shell using FDM technology because it provides control over the grounding of the instrument and makes easier the integration, cleaning and protection against impacts during the operation, with great versatility and low cost. To finish, the shell has been proved during the acceptance EMC tests of the flight model and flight spare AMR instrument., Ministerio de Economía, Industria y Competitividad (Grant Number: UAVE3 TEC-2016-79214-C3-1-R and MAGARES ESP2017-88930-R), Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Assessment of FEM simulations in EMC test setups for small aeronautical platforms

  • Plaza Gallardo, Borja
  • Poyatos Martinez, David
  • Ramajo, O.
  • López, Daniel
  • Escot Bocanegra, D.
The rise of fly-by-wire systems together with the utilization of new composite materials make it more and more difficult to assess and guarantee aircraft electromagnetic compatibility (EMC). As a result, the design phase becomes of paramount importance in the aircraft production process. Performing actual EMC tests over different configurations in such a phase would be very costly and time consuming, so reliable computational techniques are being explored in the last years. However, proper validation is needed in order to gain confidence in the results obtained by simulations. In this regard, this paper presents the assessment of a simulation approach based on the finite element method to reproduce typical setups of an EMC test laboratory for small aeronautical platforms. The final test object is based on an unmanned aerial vehicle but, first, a simpler test case is used to tune and assess the simulation approach. Once the approach is both qualitatively and quantitatively validated with measurements, new setups involving the aeronautical specimen are analysed., This work has been funded by the Spanish Ministry of Economy and Competitiveness (MINECO) under projects UAVEMI (TEC2013-48414-C3-2-R) and UAVE3 (TEC2016-79214-C3-1-R), Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Comparison of Facilities for Low Level Coupling Tests in UAV EMC Certification

  • Fernández Romero, Sergio
  • Poyatos Martinez, David
  • Añón Cancela, M.
  • Escot Bocanegra, David
  • López Rodríguez, P.
The rise in the utilization of Unmanned Aerial Vehicles (UAVs) in the last years has also brought concerns in terms of Electromagnetic Compatibility (EMC) regulation of these platforms. Depending on the nature and operations of the UAVs, they are being required to go through the same processes than an aircraft EMC certification of aircraft involves a wide variety of tests. This paper deals with two aircraft low level coupling tests, namely, Low Level Direct Drive (LLDD) and Low Level Swept Fields (LLSF) and compares the results obtained in two different sites. On one hand, an Open Area Test Site (OATS) will be employed and, on the other hand, a Reverberation Chamber (RC) will be the other facility examined. The object under test will be a representative part of an UAV., This work was supported by the projects UAVEMI (TEC2013-48414-C3-2-R) and UAVE3 (TEC2016-79214-C3-1-R) funded by the Spanish MINECO, Preprint
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Modeling and Measuring the Shielding Effectiveness of Carbon Fiber Composites

  • Díaz Angulo, L. M.
  • Gómez de Francisco, Patricia
  • Ruiz Cabello Núñez, M. D.
  • Escot Bocanegra, D.
  • García, Salvador G.
  • Plaza Gallardo, Borja
  • Poyatos Martinez, David
We provide a model able to predict the shielding effectiveness (SE) of carbon fiber composite (CFC) panels made of stacked layers of conducting fibers. This model permits us to obtain simple formulas in which the only parameters needed are the sheet square resistance and the effective panel thickness. These tools let us predict a minimum SE, which always increases with the frequency and therefore constituting the worst case, from an electromagnetic shielding perspective. Consequently, the measurement of minimum SE requirements can be simply measured with a micro-ohmmeter using an specific experimental setup which is also described here. Additionally, this method allows to measure very high SE falling far beyond the dynamic range of the values measurable with the most commonly used standard, the ASTM D4935. After describing the modeling technique and the different test setups used, across-validation between theoretical and experimental results is made for four different samples of CFC; two designed to test the modeling assumptions and two which are representative of the ones nowadays used in a real aircraft., This work was supported in part by the Spanish MINECO and EU FEDER under Project TEC2016-79214-C3-1,2,3-R (MINECO, Spain),in part by the EU PRACE project 2018184436 ESECELS, and in part by the Alhambra-LFT contract with AIRBUS (Spain)., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Limitations in the Measurement of the Shielding Effectiveness of Aeronautical Multi-ply CFC Laminates

  • Gómez de Francisco, Patricia
  • Escot Bocanegra, D.
  • Poyatos Martinez, David
  • Plaza Gallardo, Borja
  • Fernández Romero, Sergio
Modern aircraft employ profusely carbon fiber composites (CFC) for their construction. Then, it is mandatory to characterize the behaviour of this kind of materials for its use under harsh electromagnetic environments. In that sense, this paper presents the application of two standards, the ASTM D4935 and the IEC 61000-4-21, to the measurement of the shielding effectiveness (SE) of aeronautical multi-ply CFC laminates frequently used for the construction of aircraft. Each technique is well suited for a specific material or realization and a specific frequency range. So, both techniques are complementary and should be developed in parallel. Taking into account the high SE expected for this kind materials, the set-ups imply the measurement of very low signals, that poses an experimental challenge that has to be faced. Then, in this study, different test samples and realizations of CFC materials have been fabricated and measured. Improvements on the traditional measurement procedures have been applied, obtaining promising results., This work has been funded by the Spanish Ministry of Science (MCIU) under project UAVE3 (TEC2016-79214-C3-1-R)., Preprint
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Indoor Measurement of Bistatic High Resolution Range Profiles of Scale Model Aircraft Targets

  • Escot Bocanegra, D.
  • Poyatos Martinez, David
  • Plaza Gallardo, Borja
Bistatic radar has been recently attracting again the attention of engineers and scientists due to a variety of reasons, including, for instance, the current developments in passive radar systems or the advantages that bistatic radar offer to detect stealth platforms. Under these circumstances, radar cross section (RCS) measurement facilities have to be able to evolve accordingly and provide bistatic measurement capability. This paper introduces BIANCHA, a multi-purpose testing facility, and demonstrates its applicability for this purpose by presenting results of the bistatic scattering analysis of scaled model aircraft targets., This work was funded by the Spanish Ministry of Economy, Industry and Competitiveness (MEIC) within the project UAVE3 (TEC2016-79214-C3-1-R), Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

FS electromagnetic characterisation of a flexible and scalable X-band RAM

  • Aguirre, A.
  • Torres de Pedro, C.
  • Escot Bocanegra, D.
  • Plaza Gallardo, Borja
  • Poyatos Martinez, David
Along the years, RADAR absorbing materials (RAM's) have been widely introduced in aeronautic applications and platforms. However, this kind of materials presents three main problems for certain applications when they are intended to be used in real operations. First, they must be scalable from a laboratory sample to actual size, at a reasonable cost. Second, they must be able to work without metal backing for applications in non-metallic vehicles or other objects which surface might not be flat. Indeed, they should also be flexible and surface adaptable. Finally, their absorbing properties against electromagnetic fields should be preferably characterised under real conditions, that is, in free space (FS), in order to design and fabricate an appropriate material for the intended application. In this study, a self-developed, low-cost, bilayer, X-band RAM, composed of a lower layer of polyaniline silicon rubber and a top layer of silicon rubber with graphite was characterised in a bistatic anechoic chamber called BIANCHA, and the results are presented, analysed and compared with software simulation and with the typical single polarisation waveguide measurement method, showing the adequacy of FS measurements for the development of this type of RAM., This study was partially funded by the Spanish Ministry of Economy and Competitiveness (MINECO) within the projects UAVEMI (TEC2013-48414-C3-2-R) and UAVE3 (TEC2016-79214-C3-1-R) and was possible thanks to the Detectability and Electronic Warfare Laboratory of the National Institute for Aerospace Technology (INTA), Spain, the Research and Development Institute for Defense (CITEDEF), Argentina and the National University of San Martín (UNSAM), Argentina., Peerreview
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

SIVA UAV: A Case Study for the EMC Analysis of Composite Air Vehicles

  • Cabello, Miguel R.
  • Fernández, Sergio
  • Pous, Marc
  • Pascual-Gil, Enrique
  • Angulo, Luis D.
  • López, Patricia
  • Riu, Pere J.
  • Gutierrez, Guadalupe G.
  • Mateos, Daniel
  • Poyatos, David
  • Fernandez, Mireya
  • Alvarez, Jesus
  • Pantoja, Mario F.
  • Añón, Manuel
  • Silva, Ferran
  • Nuño Fernández, Luis|||0000-0001-8486-0582
[EN] The increased use of carbon-fiber composites in unmanned aerial vehicles is a challenge for their EMC assessment by numerical solvers. For accurate and reliable simulations, numerical procedures should be tested not only for individual components, but also within the framework of complete systems. With this aim, this paper presents a benchmark test case based on experimental measurements coming from direct-current injection tests in the SIVA unmanned air vehicle, reproduced by a numerical finite-difference-time-domain solver that employs a new subgridding scheme to treat lossy composite thin panels. Validation was undertaken by applying the feature selective validation method, which quantifies the agreement between experimental and numerical data., This work was supported by the Projects TEC2013-48414C3-{ 1,2,3}-R, TEC2016-79214-C3-{1,2,3}-R, and TEC2015-68766-REDC (Spanish MINECO, EU FEDER), P12-TIC-1442 (J. de Andalucia, Spain), Alhambra-UGRFDTD (AIRBUS DS), and by the CSIRC alhambra.ugr.es supercomputing center.