Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Effect of aggregate content and fibre type on the rheological behaviour and structural build-up of fibre reinforced self-compacting concrete using two binder compositions

  • Rojo-López, Gemma
  • González-Fonteboa, Belén
  • Martínez-Abella, Fernando
  • Seara Paz, Sindy
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract:] Many parameters influence the fresh behaviour of fibre reinforced self-compacting concrete (FRSCC), such as length, aspect ratio, fibre content, solid volume fraction, and particle interaction. Most studies did not analyse rheological behaviour (just workability) and they are focused on paste or mortar. However, the analysis at the concrete level is also required to confirm the behaviour when the coarse aggregates and fibres are employed. This kind of analysis is scarce in the literature. Hence, this work aims to increase the knowledge about the effect of aggregate content and fibre type on FRSCC. To do so, the behaviour of self-compacting mixes with three different aggregate contents (550, 500, and 650 l/m3), two cementitious systems (100 % cement, and 60 % cement, 25 % limestone filler and 15 % metakaolin), and three different types of rigid fibres (two metallic and one polypropylene) were analysed. To characterise the concrete rheological performance, the stress growth test (SGT) was selected to avoid any fibre orientation. SGT was repeated twice under undisturbed and disturbed conditions to assess the structural build-up of the concrete. The results indicate that there is a critical value of the relative packing fraction that, once overcome, severely affects the fresh behaviour of FRSSC. This critical value can be calculated as the ratio between random loose packing fraction and dense packing fraction. It can be used to design a FRSCC mix guaranteeing that the fresh state remains in a suitable range where the hydrodynamic interactions dominate the behaviour and therefore, changes in the mix composition will not sharply modify the rheological performance of the concrete., This research was funded by the Spanish Ministerio de Ciencia e innovación - Agencia Estatal de investigación through three projects entitled: “Design of sustainable concrete for 3D printing based on rheology and on the control of very early properties (Eco3DConcrete)- PID2020–115433RB-I00”, “Design of concrete precast elements incorporating sustainable strategies for self-healing to increase their service life (PREHEALING)- PDC2021–121660-I00” and "Exploiting the synergic effects between 3D printing and self-healing technologies to design sustainable and durable concrete (3DHealConcrete) - TED2021–129757B-I00"
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Valorisation of Biomass Sand as a Protective Carrier for Self-Healing Mortars

  • Pinto, Adonay
  • Seara Paz, Sindy
  • Cantero, B.
  • Miguel Bouzas, Trinidad de
  • González-Fonteboa, Belén
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] The high carbon footprint of cement production and the susceptibility of con-crete to cracking highlight the need for sustainable, autonomous repair strategies. This study investigates the use of biomass sand as a sustainable bacterial carrier to enhance self-healing in cement-based materials. Its performance was evaluated through com-pressive strength, mercury intrusion porosimetry, capillary absorption, shrinkage and self-healing index. Results indicate that replacing 30% of natural aggregates with bio-mass sand increased porosity and reduced strength, however the incorporation of bac-teria and calcium lactate led to the recovery of compressive strength and the reduction of capillary absorption, which is attributed to microbially induced calcium carbonate precipitation. Although the refined microstructure of mixes containing calcium lactate led to an increase in shrinkage, they demonstrated better crack-sealing efficiency than reference mortar. The mix with bacteria sealed nearly 90% of small cracks and, unlike abiotic controls, it continued its healing activity throughout the 60-days observation period. These results confirm the synergy between biomass sand and bacteria, enabling the valorization of this residue while extending the lifespan of the mortars., This work has been carried out within the framework of the following projects: “Design of concrete precast elements incorporating sustainable strategies for self-healing to increase their service life (PREHEALING)- [PDC2021-121660-I00]” and “Exploiting the synergic effects between 3D printing and self-healing technologies to design sustainable and durable concrete (3DHealConcrete) [TED2021-129757B-I00]” all funded by MINECO (Ministry of Economy, Industry and Competitiveness). In addition, the authors would like to thank Xunta de Galicia (Spain) for financial support through its predoctoral contract program and Universidade da Coruña/CISUG for the funding fo open access charge.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Automated Control of the Fresh State of Industrial Concrete Behaviour by Rheometer Test Adjustment

  • Rojo-López, Gemma
  • González-Fonteboa, Belén
  • Carro-López, Diego
  • Martínez-Abella, Fernando
[Abstract:] This study aimed to develop a rheometer prototype and define a procedure for adjusting the automated control of the fresh state of concrete. Sixteen batches were produced, and their fresh behaviour was measured at different testing times by applying the Abrams cone and flow curve test (FCT) as the rheological protocol. During this test, the yield stress and plastic viscosity of the concretes were measured in relative units. The rheometer prototype was used to define a new protocol to select the most suitable rheometer impeller arrangement and optimal FCT configuration. This protocol considers the torque at the end of the breakdown period, torque reduction during the breakdown period, segregation, and negative values of the yield stress in relative units. This protocol also enabled an iterative adjustment procedure, facilitating the use of a rheometer for the automated control of the homogeneity and behaviour of fresh concrete, as well as real-time decision making., This research was funded by the Spanish Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación through three research projects entitled: “Design of sustainable concrete for 3D printing based on rheology and on the control of very early properties (Eco3DConcrete)—PID2020-115433RB-I00”, “Design of concrete precast elements incorporating sustainable strategies for self-healing to increase their service life (PREHEALING)—PDC2021-121660-I00” and “Exploiting the synergic effects between 3D printing and self-healing technologies to design sustainable and durable concrete (3DHealConcrete)—TED2021-129757B-I00”.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Genetic programming to understand the influence of new sustainable powder materials in the fresh performance of cement pastes

  • Rojo-López, Gemma
  • González-Fonteboa, Belén
  • Pérez Ordóñez, Juan Luis
  • Martínez-Abella, Fernando
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract:] This study focused on pastes that incorporate metakaolin, biomass ash, and granite powder as supplementary cementitious materials to obtain specific expressions to predict rheological properties in pastes and to define the most appropriate dosage parameters using genetic programming. For this purpose, a dataset was developed following a central composite design, and some fresh properties were measured: Marsh cone and rheological properties, such as yield stress and plastic viscosity. The models generated by genetic programming presented robust statistical indices for the properties studied. The influence of supplementary cementitious materials on rheological properties was also analysed through a parametric analysis. After analysing the factors affecting paste rheology, it was concluded that the most important aspects affecting fresh behaviour were water demand and particle interaction, as well as the relation between both effects., This study is part of two projects entitled: “Design of sustainable concrete for 3D printing based on rheology and on the control of very early properties (Eco3DConcrete)- PID2020-115433RB-I00”, “Design of concrete precast elements incorporating sustainable strategies for self-healing to increase their service life (PREHEALING)- PDC2021-121660-I00” and "Exploiting the synergic effects between 3D printing and self-healing technologies to design sustainable and durable concrete (3DHealConcrete) - TED2021-129757B–I00" funded by MINECO.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Effect of fly ash blending in internally cured mortar under air-drying curing conditions

  • Rodríguez-Álvaro, Roberto
  • Seara Paz, Sindy
  • Cantero, B.
  • González-Fonteboa, Belén
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract]: A proper humid curing of concrete structures is commonly considered as vital to guarantee their strength development and durability. However, undesired periods of air-drying curing conditions can take place. Therefore, the performance of concrete in this situation should be studied. This research work aims to better understand how internally cured fly ash blended cement mortars are affected by air-drying curing conditions. Coal bottom ash (CBA) and wood bottom ash (WA) were used as internal curing water reservoirs. Results show a poor strength development after the age of one week. Moreover, mortar specimens lose a considerable amount of weight during their first days of curing due to water evaporation. This severe drying, together with a long-term carbonation (depth, weight gain and shrinkage), affects the fly ash (FA) blended cement mortars more than the ordinary Portland cement (OPC) mortars. Furthermore, a pore structure analysis was carried out, showing that FA-blended mixtures present a higher total porosity and internal curing cannot effectively refine the pores in the matrix when OPC is the only binder. Self-desiccation was detected in combination with external drying thanks to a comparative study between weight changes and shrinkage. Internal curing can mitigate the self-desiccation shrinkage but increases the drying shrinkage. Moreover, the presence of the waste porous aggregates counteracts the internal curing effect decreasing the strength, and barely affects the carbonation process. As a general conclusion, it can be stated that air-drying curing conditions should be avoided and external wet or sealed curing should always complement internal curing, especially if blended cements are used., This work has been carried out within the framework of the project “Exploiting the synergic effects between 3D printing and self-healing technologies to design sustainable and durable concrete (3DHealConcrete) [TED2021-129757B-I00]” funded by Ministry of Science and Innovation (National Agency of Research – Agencia Estatal de Investigación, Spain). Funding for open access charge: Universidade da Coruña/CISUG.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Effects of bacteria-based self-healing nutrients on hydration and rheology of cement pastes

  • Pinto, Adonay
  • González-Fonteboa, Belén
  • Seara Paz, Sindy
  • Martínez-Abella, Fernando
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract:] Crack openings in concrete lead to a reduction in its lifespan. Many authors have analysed different techniques that could repair cracks autonomously, being the use of bacteria one of the most promising approaches. Bacteria are often introduced with nutrients in the concrete mixes, and they may alter the cement hydration. In this study, the effects that calcium lactate, calcium nitrate, and yeast extract have on cement pastes during the early hours of hydration were analysed. To accomplish this, calorimetry, in situ X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Vicat and rheology techniques were employed. The results demonstrated that the addition of calcium lactate led to higher values of ettringite, which altered the rheological behaviour of the pastes. Moreover, when added at 4%, calcium lactate also delayed the setting time by inhibiting the reaction of silicates, a similar effect was observed when yeast extract was added. Lastly, the incorporation of nitrate accelerated the setting time., This work has been carried out within the framework of the following projects: “Design of sustainable concrete for 3D printing based on rheology and on the control of very early properties (Eco3DConcrete)- [PID2020-115433RB-I00]”, “Design of concrete precast elements incorporating sustainable strategies for self-healing to increase their service life (PREHEALING)- [PDC2021-121660-I00]” and “Exploiting the synergic effects between 3D printing and self-healing technologies to design sustainable and durable concrete (3DHealConcrete) [TED2021-129757B-I00]” all funded by MINECO (Ministry of Economy, Industry and Competitiveness). In addition, the authors would like to thank the Xunta de Galicia (Spain) for the financial support through its pre-doctoral contracts program.