Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Efficient numerical methods for semilinear one dimensional parabolic singularly perturbed convection-diffusion systems

  • Clavero, C.
  • Jorge, J.C.
In this work we deal with the numerical solution of one dimensional semilinear parabolic singularly perturbed systems of convection-diffusion type. We assume that the coupling in the convection terms is weak and also that the coupling reaction terms are nonlinear. In the case of considering different small diffusion parameters at each equation with different orders of magnitude, the exact solution usually shows overlapping boundary layers on the outflow of the spatial domain. To approximate it, we construct a numerical scheme which combines the upwind finite difference scheme, defined on a piecewise uniform Shishkin mesh, to discretize in space and a linearized version of the fractional implicit Euler method together with an appropriate splitting by components to discretize in time. Then, the fully discrete method is uniformly convergent with respect to both diffusion parameters, having first order in time and almost first order in space. The choice of this time integrator provokes that only tridiagonal linear systems must be solved at each time step; in this way, the computational cost of the algorithm is considerably lower than this one associated to classical implicit methods. The numerical results obtained for different test problems corroborate in practice the good performance of the numerical algorithm.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Electromagnetic vibrational harvester based on U-shaped ferromagnetic cantilever: a novel two-magnet configuration

  • Gandía Aguado, David
  • Garayo Urabayen, Eneko
  • Beato López, Juan Jesús
  • Royo Silvestre, Isaac
  • Cruz Blas, Carlos Aristóteles de la
  • Tainta Ausejo, Santiago
  • Gómez Polo, Cristina
Electromagnetic vibrational harvesters are low-cost devices featuring high-power densities and robust structures, often used for capturing the energy of environmental vibrations (civil infrastructures, transportation, human motion, etc.,). Based on Faraday’s law, energy generation relies on the modification of the magnetic field distribution within a magnetic element caused by mechanical vibrations inducing an electromotive force (EMF) in a pick-up coil. However, the practical implementation of this type of vibrational harvester is currently limited due to the reduced generated power under low-frequency vibrations. In this work, an electromagnetic vibrational harvester is experimentally characterized and analyzed employing magnetic circuit analysis. The harvester consists of a ferromagnetic U-shaped cantilever, a NdFeB magnet and a ferrite magnet used as “magnetic tip mass” to enhance the magnetic flux changes under vibrations of frequency < 100 Hz. For this configuration, an experimental voltage of ∼ 1.2 V peak-to-peak (open circuit) was obtained at a resonant frequency of 77 Hz, enabling the subsequent electronic rectification stage. Additionally, Finite Element Method (FEM) is used to explore different design possibilities including the modeling of complex geometries, mechanical properties and non-linear magnetic materials, enabling the tuning of the resonance frequency from 51 to 77 Hz, keeping constant the induced voltage., This work is funded by Spanish Agencia Estatal de Investigación and Ministerio de Ciencia e Innovación MCIN/AEI/10.13039/501100011033 and by by "European Union NextGenerationEU/PRTR", project TED2021-130884B-I00.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

An efficient uniformly convergent method for multi-scaled two dimensional parabolic singularly perturbed systems of convection-diffusion type

  • Clavero, Carmelo
  • Jorge Ulecia, Juan Carlos
In this work we solve initial-boundary value problems associated to coupled 2D parabolic singularly perturbed systems of convection-diffusion type. The analysis is focused on the cases where the diffusion parameters are small, distinct and also they may have different order of magnitude. In such cases, overlapping regular boundary layers appear at the outflow boundary of the spatial domain. The fully discrete scheme combines the classical upwind scheme defined on an appropriate Shishkin mesh to discretize the spatial variables, and the fractional implicit Euler method joins to a decomposition of the difference operator in directions and components to integrate in time. We prove that the resulting method is uniformly convergent of first order in time and of almost first order in space. Moreover, as only small tridiagonal linear systems must be solved to advance in time, the computational cost of our method is remarkably smaller than the corresponding ones to other implicit methods considered in the previous literature for the same type of problems. The numerical results, obtained for some test problems, corroborate in practice the good behavior and the advantages of the algorithm., This research was partially supported by the projects PID2022-136441NB-I00 and TED2021-130884B-I00, the Aragón Government and European Social Fund (group E24-17R) and the Public University of Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Design and optimization of a compact rectangular galfenol-based magnetostrictive energy harvester

  • Gandía Aguado, David
  • Gómez-Hurtado, Jorge
  • Beato López, Juan Jesús
  • Garayo Urabayen, Eneko
  • Royo Silvestre, Isaac
  • Vargas Silva, Gustavo Adolfo
  • Gómez Polo, Cristina
Electromagnetic vibration energy harvesters are widely explored as low-cost and robust solutions for powering wireless and low-power electronics. Based on Faraday¿s law, energy generation relies on the modification of the magnetic field distribution within a magnetic element caused by mechanical vibrations inducing an electromotive force (EMF) in a pick-up coil. Within cantilever-based approaches, most harvesters employ rectangular, U-shaped or V-Shaped beams coupled with active materials, coils and permanent magnets, with varying levels of complexity and efficiency. In this work, we present a magnetostrictive harvester based on a rectangular iron cantilever with a bonded Galfenol layer and two cubic magnets, to collect the energy of one dimensional vibrations, optimized through Finite Element simulations and experimental testing. Finite Element Method (FEM) is used to explain the harvester behavior. Magnetic modeling enabled accurate estimation of the H-field inside the Galfenol, guiding the system toward the optimal bias field (~8 kA/m), while mechanical simulations provided insight into internal stress distribution. This dual modeling strategy not only supported the experimental results but also can be used to design efficient magnetostrictive harvesters for real-world applications. Thanks to the to the refinement process, the resulting design, despite its simplicity, delivers a peak power density of 2.12 mW/cm³ at 40 Hz resonance, demonstrating performance comparable to that of significantly more complex magnetostrictive harvesters., This work is funded by Spanish Agencia Estatal de Investigación and Ministerio de Ciencia e Innovación MCIN/AEI/ 10.13039/501100011033 and by 'European Union NextGenerationEU/PRTR', project TED2021-130884B-I00.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Reducing the environmental impact and cost of ultra-low frequency vibrational energy harvesters based on magnetic levitation

  • Royo Silvestre, Isaac
  • Gómez-Hurtado, Jorge
  • Beato López, Juan Jesús
  • Gandía Aguado, David
  • Garayo Urabayen, Eneko
  • Gómez Polo, Cristina
Vibration energy harvesting is a technology that can harvest energy from environmental vibrations to power sensors and actuators, replacing batteries and avoiding extensive wiring in remote applications such as wireless sensor networks or infrastructure monitoring. Commercial devices successfully operate at low frequency, but some challenges remain to be solved. On one hand, the advantages over batteries depend on the actual environmental impact and cost of the harvester itself, both features hindered by the use of rare earth magnets. On the other hand, operation under ultra-low frequency vibrations is problematic even for laboratory prototypes. In this work, one-degree-of-freedom magnetic levitation-based energy harvesters are analyzed for ultra-low frequency vertical vibrations. Strategies for decreasing the resonant frequency and replacing rare earths for ferrite magnets are discussed. A prototype incorporating ferrite magnets is built and tested, achieving a resonant frequency of 2.8 Hz (the lowest for a portable harvester of this kind). In addition, different housing materials are compared to reduce friction and reliability, introducing 3D-printed resin housings as a promising alternative. The obtained results are compared with those of previously reported devices published in the literature in terms of environmental impact and cost, including LCAs (life cycle assessment) of the permanent magnets used in the prototypes, concluding that ferrite magnets can be successfully implemented in this kind of devices. The use of ferrites instead of NdFeB reduces the environmental impact of the fixed magnet by at least 20 %, and decreases its cost by 50 %., This work is funded by Spanish Agencia Estatal de Investigación and Ministerio de Ciencia e Innovación MCIN/AEI/ 10.13039/501100011033 and by 'European Union NextGenerationEU/PRTR', project TED2021-130884B-I00. Open access funding provided by Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Fast calculation methods for the magnetic field of particle lattices

  • Royo Silvestre, Isaac
  • Gandía Aguado, David
  • Beato López, Juan Jesús
  • Garayo Urabayen, Eneko
  • Gómez Polo, Cristina
With the rise of 3D printing and composite materials, components comprising dispersed magnetic particles have become more interesting due to the possibility to design magnetic elements of any shape with varying amounts of the actual magnetic material. However, quick and easy calculation methods are needed to design these components enabling the selection of the optimum required percentage of magnetic particles (millimeter parts contain billions of micro-sized particles). This work proposes a semi-analytical iterative method for the estimation of the magnetic field generated by magnetic composites formed by embedded magnetic particles. The model is compared in terms of accuracy and calculation speed with finite element analysis and the average magnetization model of the magnetic composite. The results are finally supported by the comparison with experimental measurements of the weak magnetic field generated by a magnetic particle lattice., This work was partially supported by Spanish Agencia Estatal de Investigación and Ministerio de Ciencia e Innovación MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR, Project No. TED2021-130884B-I00.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Optimization procedure of low frequency vibration energy harvester based on magnetic levitation

  • Royo Silvestre, Isaac
  • Beato López, Juan Jesús
  • Gómez Polo, Cristina
Permanent magnets are widely employed in levitation-based vibration harvesters and sensors, but their operational range does not span ultra-low frequencies unless a mechanical resonator is added. In this work, an algorithm based on analytical equations has been implemented to design magnetic springs in resonant vibration energy harvesters operating at very low frequencies and the results have been comparatively checked and refined using 3D FEA (Finite Element Analysis). Particularly, a prototype based on a fixed ferrite and a mobile rare-earth magnet is designed, where the semi-analytical optimum solution was properly modified via FEA. The experimental induced pick-up voltage is characterized for ultralow vibrations (resonant frequency 1.7 Hz)., This work is funded by Spanish Agencia Estatal de Investigación and Ministerio de Ciencia e Innovación MCIN/AEI/ 10.13039/501100011033 and by “European Union NextGenerationEU/PRTR”, project TED2021-130884B-I00. Open access funding provided by Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

3D-printed multiresonant sensor for ultra-low frequency vibration monitoring

  • Gómez-Hurtado, Jorge
  • Liguori, Deborah
  • Royo Silvestre, Isaac
  • Gandía Aguado, David
  • Algueta-Miguel, Jose M.
  • Hernández-Saz, Jesús
  • Gómez Polo, Cristina
  • Garayo Urabayen, Eneko
  • López Ortega, Alberto
  • Beato López, Juan Jesús
A proof-of-concept accelerometer for ultra-low and low-frequency vibration sensing is presented. The device integrates a high-sensitivity Giant Magnetoimpedance (GMI) sensor with a 3D-printed magnetized resonant structure, based on the low Young’s modulus of polymers and the geometric versatility of additive manufacturing to explore its potential as an alternative sensing approach to conventional piezoelectric sensors in the low-frequency regime. The sensing architecture consists of a serpentine-like PLA resonator combined with a self-manufactured hard magnetic composite of cobalt-doped ferrite nanoparticles CoxFe3−xO4 embedded in a polycaprolactone matrix. Finite Element Method (FEM) simulations were utilized to optimize the geometry, ensuring fundamental resonant modes within the targeted ultra-low-frequency range. Experimental results demonstrate a primary resonant response between 8 and 11 Hz, maintaining high detection reliability even at peak-to-peak acceleration levels as low as 0.05 g. Furthermore, the sensing performance is shown to be highly tunable by adjusting the magnetic nanoparticle loading or remanent magnetization, while the addition of proof masses allows for post-fabrication frequency shifting down to 4.3 Hz. This work demonstrates a low-cost, contactless, and reconfigurable platform for sensing ultra-low and low-frequency vibrations even at low acceleration levels., Open Access funding provided by Universidad Pública de Navarra. This work is funded by Spanish Agencia Estatal de Investigación and Ministerio de Ciencia e Innovación MCIN/AEI/ https://doi.org/10.13039/501100011033 and by 'European Union NextGenerationEU/PRTR', project TED2021-130884B-I00. D.L. acknowledges the EU's Horizon 2020 - Marie-Sklodowska Curie action (grant agreement No 101034285). A.L.O. acknowledges financial support from the grant CNS2022-135787 funded by MCIN/AEI /https://doi.org/10.13039/501100011033 and European Union NextGenerationEU/PRTR) and PID2024-160292OB-I00 funded by MCIU/AEI/https://doi.org/10.13039/501100011033/FEDER, UE.