Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Valorization of carbonaceous co-product obtained from iron ore-catalyzed methane cracking as support for Pd catalysts in toluene hydrogenation reaction

  • López de los Ríos, Jaime
  • Torres Gamarra, Daniel
  • Di Stasi, Christian
  • Ayala Cortés, Alejandro
  • Suelves Laiglesia, Isabel
  • Pinilla Ibarz, José Luis
11 figures, 7 tables., Iron ore has been proven as an abundant and sustainable catalyst in the production of hydrogen by catalytic cracking of methane. One of the main challenges is the identification of suitable market niches for the utilization of the resulting iron-carbon hybrid in order to make this process economically viable. This study examines the feasibility of using the iron-carbon hybrid obtained from methane cracking as support of Pd catalysts for the hydrogenation of toluene (350 ºC, 35 bar of H2 at room temperature and 90 min). Before supporting Pd, Fe-C hybrid was subjected to different acid functionalization treatments (nitric and/or phosphoric acids). The results indicate that sequential oxidation with nitric acid, followed by phosphoric acid, is the most effective strategy for achieving the highest catalytic activity (1294 mmolToluene gPd⁻¹) and conversion (27 %). Toluene conversion was 1.8 and 14.2 times higher than with the catalysts treated with nitric and phosphoric acid separately. Therefore, this work proves the possibility of employing carbon/Fe hybrid materials obtained in iron ore catalyzed methane cracking as catalytic supports in industrial relevant reactions., This research was funded by MCIN/AEI/10.13039/501100011033 and EU “NextGenerationEU”/PRTR” through project TED2021- 131416B-I00. The authors also acknowledge Gobierno de Aragón (DGA) for the financial support to Grupo de Conversión de Combustibles (T06_20R). J L-d.l.R. acknowledges Diputación General de Aragón (DGA) for the predoctoral fellowship. DT is grateful for the Juan de la Cierva Incorporación (JdC-I) fellowship (Grant Number: IJC2020-045553-I) funded by MCIN/AEI/ 10.13039/501100011033 and by “European Union NextGenerationEU/PRTR. C.D.S is grateful for the Juan de la Cierva (JdC) fellowship (Grant Number: JDC2022-048765-I) funded by MICIU/AEI /10.13039/501100011033 and by FSE+., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carbono grafítico como soporte catalítico en la hidroisomerización selectiva de hexadecano

  • López de los Ríos, Jaime
  • Di Stasi, Christian
  • Torres Gamarra, Daniel
  • Pinilla Ibarz, José Luis
  • Suelves Laiglesia, Isabel
1 figura.-- Resumen del póster presentado en la II Jornada de Jóvenes Investigadores del Grupo Español del Carbón, celebrada en Baeza (Jaén, España), 20 - 22 de noviembre de 2024, en la sección Aplicaciones Innovadoras de los Materiales basados en Carbono: Salud, Industria, Medioambiente y Sostenibilidad., La isomerización de alcanos es un proceso clave en la obtención y la mejora de combustibles con propiedades específicas como los combustibles de aviación (jet fuel) que se obtienen a partir de ceras de Fisher-Tropsch. Éste se lleva a cabo con el empleo de catalizadores bifuncionales capaces de realizar simultáneamente procesos de hidrogenación/deshidrogenación (empleando metales nobles como Pt y Pd) y la modificación estructural de la molécula (isomerización), llevada a cabo por sitios ácidos de Brønsted presentes en el soporte catalítico [1]. Aunque los soportes más empleados son zeolitas y fosfato silicoaluminoso (SAPO), los nanomateriales de carbono representan una alternativa interesante a los mismos. Propiedades importantes como la acidez y la porosidad pueden ajustarse en estos nanomateriales mediante tratamientos físicoquímicos. Este trabajo tiene como objetivo desarrollar un catalizador activo y selectivo en la isomerización de hexadecano, utilizando el carbono grafítico obtenido de la descomposición catalítica de metano como soporte. Además, se adiciona sílica-alúmina comercial como estrategia para incrementar la acidez del mismo y Pt o Pd como sitios metálicos activos. La isomerización de hexadecano se realiza en un reactor batch con H2 a 40 bar de presión inicial, analizándose el impacto de la temperatura, el tiempo de reacción y la influencia del soporte sobre la conversión y selectividad a isómeros. Como se muestra en la Fig. 1, el catalizador de Pt es más activo y selectivo que el de Pd. Incrementando la temperatura de 250 a 400 ºC se mejora la conversión y el craqueo del hexadecano, mientras que alargando el tiempo de reacción mejoran tanto la conversión como la selectividad a isómeros., Los autores agradecen a MCIN/AEI/10.13039/501100011033 y la UE “NextGenerationEU”/PRTR” por la financiación recibida a través del proyecto TED2021-131416B-I00. JLR agradece a la DGA por su contrato predoctoral., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning hydroconversion performance of n-hexadecane over Ni/silica-alumina catalysts: Role of Si/Al ratio and nickel loading

  • Andrades García, María
  • Di Stasi, Christian
  • Ayala Cortés, Alejandro
  • Torres Gamarra, Daniel
  • Suelves Laiglesia, Isabel
  • Pinilla Ibarz, José Luis
10 figures, 2 tables., This study introduces a cost-effective approach to sustainable aviation fuel (SAF) production by systematically tuning the Si/Al ratio and Ni loading on silica-alumina (Siral) supports to optimize metal-acid balance during hydroconversion of Fischer-Tropsch (FT) waxes. Using n-hexadecane as a model compound, it has been demonstrated that support composition and Ni content strongly influence Brønsted acidity (0.73–1.94 mmol g−1), Ni dispersion (7.0–27.8 %), and surface area (270–326 m2 g−1). Catalytic tests at 350 °C and 60 bar H2 in batch reactor showed that Ni10/Siral40 achieved the best performance, with 67 % conversion and 27 % isomer selectivity. Lower SiO2/Al2O3 ratios reduced acidity and favored hydrocracking. Similarly, excessive Ni loading led to pore blockage and decreased selectivity, whereas moderate loading ensured optimal metal-acid balance. These findings demonstrate the novelty of tuning the support composition (using a wide range of supports) and Ni loading enables control over acidity, dispersion, and porosity, which are key parameters for maximizing SAF yield. On the other hand, the results obtained in a fixed-bed reactor using the optimal conditions determined in batch mode show lower conversion (44 %) but considerably higher isomer selectivity (77 %). This work reports, for the first time, the use of Ni/Siral catalysts in continuous-flow reactors for the hydroconversion of Fischer-Tropsch waxes., This research was funded by the Ministry of Science and Innovation (MCIN)/State Research Agency MCIN/AEI/10.13039/501100011033 and EU “NextGenerationEU”/PRTR” through project TED2021-131416B-I00, and by the MCIN with “NextGenerationEU” funds from the European Union (PRTR-C17-I1) within the Energy and Green Hydrogen-CSIC program, as part of the Interdisciplinary Thematic Platform of the CSIC (PTI+) Sustainable Energy Transition+ (PTI-TRANSENER+). Authors acknowledge the Government of Aragon for the grant awarded to the Fuel Conversion Group (T06_23R). C.D.S is grateful for the Juan de la Cierva (JdC) fellowship (Grant Number: JDC2022-048765-I) funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR., Peer reviewed