Pasar al contenido principal

ESTRATEGIAS DE GESTION DE PROCESOS Y TECNICAS DE INTELIGENCIA ARTIFICIAL PARA LA MEJORA CONTINUA EN LA ATENCION AL ENFERMO CRONICO

TIN2014-53067-C3-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD DE ALICANTE
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 1
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of iron oxide content and microstructural porosity on the performance of ceramic membranes as microbial fuel cell separators

  • Salar-García, M. J.
  • Walter, X. A.
  • Gurauskis, Jonas
  • Ramón Fernández, A. de
  • Ieropoulos, I.
Ceramic materials based on naturally occurring clays are a low cost and environmentally friendly alternative to commercial polymer-based membranes in bioelectrochemical systems. In this work, ceramic membranes containing different amounts of iron oxide (1.06, 2.76 and 5.75 vol.%) and sintered at different temperatures (1100, 1200 and 1300 °C) have been elaborated and tested as separators in urine-fed microbial fuel cells (MFCs). The results reveal that the presence of iron oxide in the ceramic membrane composition increases the structural porosity and reduces the pore size for the three temperatures investigated. On the other hand, it was also observed that the iron content mitigates the negative effect of the high sintering temperature on the power performance of the MFCs. In the case of the ceramic membranes sintered at 1300 °C, power output improved ca. 10-fold when the iron oxide content in the membrane increased from 1.06 up to 5.75 vol.% (30.9 and 286.6 µW, respectively). Amongst the different combinations of iron phase content and sintering temperatures, the maximum power output was obtained by MFCs working with separators containing 5.75 vol. % of iron oxide and sintered at 1100 °C (1.045 mW). Finally, the system was stable for 65 days, which supports the long-term functionality of the different materials assessed., M.J. Salar-García and A. De Ramón-Fernández are supported by Fundación Séneca (Ref. 20372/PD/17) and the Ministry of Economy and Competitiveness (Ref. BES-2015–073611), respectively. I. A. Ieropoulos and X. A. Walter thank the Bill & Melinda Gates Foundation (Grant No. INV-006499) for funding parts of this work., Peer reviewed