Pasar al contenido principal

DESARROLLO DE CATALIZADORES BASADOS EN GRAFENOS FUNCIONALIZADOS/DOPADOS Y NANOCOMPOSITES DE GRAFENO PARA CONVERSION ELECTROQUIMICA DE ENERGIA

ENE2014-52158-C2-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of molybdophosphoric acid in iron and cobalt graphene/chitosan composites for oxygen reduction reaction

  • Aghabarari, Behzad
  • Nezafati, N.
  • Roca-Ayats, M.
  • Capel Sánchez, María del Carmen
  • Lázaro Elorri, María Jesús
  • Martínez Huerta, M. Victoria
Iron and cobalt materials have attracted enormous interest as low-cost alternatives to noble-metal catalysts able to catalyse oxygen reduction reaction. Here, the effect of the heteropolyacid H3PMo12O40 (HPMo) into the structure of new composites formed by Fe, Co and reduced-graphene oxide/chitosan (rGOCS) has been investigated. Chitosan was used as a nitrogen precursor for nanocarbon, while reduced graphene oxide was introduced to tune the electrical conductivity. The physicochemical properties of electrocatalysts were performed by Raman, XRD, XPS and TEM. Activity toward ORR was carried out in a three-electrode electrochemical cell using a rotating disk electrode (RDE). The molybdophosphoric acid incorporation into the structure of Fe/rGOCS composites resulted in an increase of the activity of the oxygen reduction reaction in alkaline medium. Furthermore, the replacement of iron by cobalt yielded in a great improvement of the activity and stability, which may open new avenues for the design of nanomaterials utilizing HPMo/reduced-graphene oxide/chitosan composites., This work was supported by the Spanish Government under the MINECO projectENE2014-52158-C2-1R (co-funded by FEDER), Spanish National Research CouncilCOOPB20202 and MERC project721394002. M.R.A acknowledges the FPU-2012 program for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bifunctional N‐doped graphene Ti and Co nanocomposites for the oxygen reduction and evolution reactions

  • Luque-Centeno, José Manuel
  • Martínez Huerta, M. Victoria
  • Sebastián del Río, David
  • Lemes Pacheco, Giovanni
  • Pastor Tejera, Elena
  • Lázaro Elorri, María Jesús
Developing efficient, durable, and low cost catalysts based on earth-abundant elements for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is essential for renewable energy conversion and energy storage devices. We report herein a simple one-pot procedure for the synthesis of non-precious metals N-doped graphene composites employing urea as nitrogen source, and their application as bifunctional catalysts for both the ORR and OER in alkaline environment. In this study, the effects of the addition of Ti and Co on the structure and performance of the N-doped graphene composites are investigated. The incorporation of Ti leads to a composite with both anatase and rutile TiO2 crystalline phases as well as Ti3+ species stabilized upon hybridization with N-doped reduced graphene oxide. The ORR onset potential for the Ti-based composite is 0.85 V (vs. RHE) and the number of electrons transferred is 3.5, showing superior stability than Pt/C after accelerated potential cycling in alkaline solution. However, this composite shows low activity and stability for the OER. On the other hand, the composite consisting of metallic Co and Co3O4 nanocrystals grown on N-doped reduced graphene oxide exhibits the best performance as bifunctional catalyst, with ORR and OER onset potentials of 0.95 V and 1.51 V (vs. RHE), respectively, and a number of electrons transferred of 3.6 (ORR). The results reveal the presence of important structural features such as metallic Co as the predominant crystalline component, amorphous Co3O4 phase and the coordination of Co-N-doped graphene. All of them seem to be fundamental for the high activity and stability towards ORR and OER., Authors acknowledge financial support given by Spanish Ministry of Economy and Competitiveness (MINECO) through projects ENE2014-52158-C2-1-R and 2-R (co-founded by FEDER). J. M. Luque and G. Lemes also thank MINECO and Aragon Government, respectively, for their Ph.D. grants., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrocatalysts for low temperature fuel cells

  • Martínez Huerta, M. Victoria
  • Lázaro Elorri, María Jesús
Low temperature fuel cells technologies are currently shifting very fast from fundamental research to real growth. The development of electrocatalysts plays a vital role in the electrocatalytic reactions involved in these devices, because the catalyst determines the overall reaction efficiency, durability and cost. This article review progress in the research and development of electrocatalysts for low temperature fuel cells technologies, with especial attention in the contribution of our research teams over the last 15 years or so. The intensive research efforts in reducing or replacing Pt-based electrodes in fuel cells have been focus in the use of carbon nanomaterials as electrocatalytic supports, including carbon nanostructures tailored by surface modification or building in particular dopants/defects. Recent research effort has also led to the use of electronic conductivity noncarbon support materials. In addition, carbon-composite materials are proving to be a robust, inexpensive and active electrocatalysts, where the synergetic effect between the carbon nanomaterials and the ceramic or polymer nanostructures can lead to a superior electrocatalytic performance and durability for low temperature fuel cells. Perspectives on these catalysts and possible pathways to address current remaining challenges are also discussed., Authors thank the Ministry of Economy and Competitiveness (MINECO) and FEDER through the Project ENE2014-52158-C2-1-R for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

DEMS strategy for the determination of the difference in surface acidity of carbon materials

  • Pérez Rodríguez, Sara
  • García, Gonzalo
  • Lázaro Elorri, María Jesús
  • Pastor Tejera, Elena
2 Figuras. 1 Tabla., Differential electrochemical mass spectrometry (DEMS) was used to establish the difference in surface acidity in sulfuric acid solution between commercially available carbon black (Vulcan) and Vulcan which had been chemically modified with concentrated nitric acid (VulcanO). The mass signal for the m/z = 2 associated with H2 formation was observed to be influenced by functional groups at the carbon surfaces. Analysis of the mass spectra with the help of the Nernst equation allowed us to quantitatively find the difference in surface pH between the two carbon-based materials in acid media. The elevated concentration of functional groups at the VulcanO surface results in a decrease in the local acidity of the surface under these conditions (0.5 M H2SO4), and consequently the hydrogen evolution reaction (HER) is delayed., The authors gratefully acknowledge financial support given by Spanish MINECO (ENE2014-52158-C2-2-R and 1-R). GG acknowledges the Viera y Clavijo program (ACIISI & ULL) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical behavior of the carbon black Vulcan XC-72R: influence of the surface chemistry

  • Pérez Rodríguez, Sara
  • Pastor Tejera, Elena
  • Lázaro Elorri, María Jesús
The effect of chemical surface oxidation of the carbon black Vulcan XC-72R on the capacitance, tolerance to corrosion and electrochemical activity toward the hydrogen evolution reaction (HER) has been studied in 0.1 M NaHCO3. Acid treatments with HNO3 or a HNO3H2SO4 mixture resulted in a progressive introduction of oxygen-containing groups which led to a strong increase of the capacitance and a higher tendency to carbon corrosion. In contrast, an inhibition of the hydrogen evolution current (at potentials more negative than −1.0 V) was observed for oxidized samples in comparison to the un-treated material. HER was also tested in the presence of dissolved CO2 to study the influence of the surface chemistry on the CO2 electroreduction. An inhibition of the H2 evolution current was evidenced in the CO2 saturated electrolyte due to the adsorption of species from CO2 reduction. A strong hydrogen current decrease (65–78%), and thus a higher tendency to adsorb (CO2)red species, was obtained on the original Vulcan and the HNO3-treated samples, in comparison to the carbon oxidized with HNO3H2SO4 (15%), which could be related to the highest content of basic groups of the last carbon., The authors gratefully acknowledge financial support given by Spanish MINECO (ENE2014-52158-C2-1-R and 2-R). S. Pérez-Rodríguez thanks Gobierno de Aragón for the DGA grant. Furthermore, the authors wish to acknowledge Dra. Ana Beatriz García for the TPD measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carbon supported PdM (M = Fe, Co) electrocatalysts for formic acid oxidation. Influence of the Fe and Co precursors

  • Juárez Marmolejo, Leticia
  • Pérez Rodríguez, Sara
  • Montes de Oca Yemha, María G.
  • Palomar Pardavé, Manuel
  • Romero Romo, Mario A.
  • Ezeta Mejía, Araceli
  • Morales Gil, Perla
  • Martínez Huerta, M. Victoria
  • Lázaro Elorri, María Jesús
8 Figuras.- 4 Tablas, Pd and PdM (M = Fe or Co) nanostructured electrocatalysts were synthesized by the impregnation method and supported on carbon black Vulcan XC-72R for the formic acid oxidation reaction, FAOR, in acid medium. Nitrates or chlorides were used as Fe and Co precursors to study the counter ion role on the physicochemical features and electrochemical performance of the electrocatalysts. TEM analysis showed that PdM was deposited on the carbon material with a particle size around 2–3 nm. From XRD, peaks associated with the fcc palladium planes were observed along with evidence of PdM alloy formation, particularly when the nitrate salts were used as metal precursors. Furthermore, XPS analyses indicated that nitrates promote the metal oxide formation to a greater extent than chlorides, mainly for Pd. PdCo electrocatalyst obtained from nitrates exhibited the highest performance for FAOR with a steady state current density of 451 and 313 μA cm−2 at 200 and 400 mV respectively, which is in both cases, 3 times larger than that developed for a commercial Pd/C catalyst., LJM is grateful to CONACYT for the grant awarded for this research, as well as to the UAM-A and the ICB for the support provided. MGMY, MRR, MPP and AEM thank the SNI for the distinction of their membership and the stipend provided. MGMY is indebted to L'oreál-UNESCO-CONACyT-AMC for the grant Women in Science 2016. MJL and SPR gratefully acknowledge financial support given by Spanish MINECO (ENE2014-52158-C2-1-R)., Peer reviewed