Pasar al contenido principal

DESARROLLO DE CATALIZADORES BASADOS EN GRAFENOS FUNCIONALIZADOS/DOPADOS Y NANOCOMPOSITES DE GRAFENOS PARA LA CONVERSION ELECTROQUIMICA DE ENERGIA

ENE2014-52158-C2-2-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD DE LA LAGUNA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the design of Pt-Sn efficient catalyst for carbon monoxide and ethanol oxidation in acid and alkaline media

  • Rizo, Rubén
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
  • Pastor Tejera, Elena
Pt-Sn catalysts supported on carbon, with different Pt-Sn atomic ratios (3:1, 1:1, 1:3), were prepared through the formic acid method (FAM) and supported on different carbon supports (nanofibers and carbon blacks) to study their behavior toward CO stripping and ethanol oxidation reaction (EOR). PtSn/C catalysts and supports were physicochemically characterized by XRD, EDX, XPS, TEM and TPD. Good particle dispersion onto the carbon support, similar particle sizes (around 4-5 nm) and the presence of tin oxides were observed in all cases. Sn insertion favored the development of the Pt3Sn1 phase and the presence of higher oxidation states of both metals in the catalyst. Ethanol and adsorbed CO oxidation was studied at these materials both in acid and alkaline media, by linear sweep voltammetry and chronoamperometry. Higher EOR current densities were obtained with the increase in the amount of Sn in the samples, been those materials supported on CNF the ones with the best CO tolerance and catalytic activity toward this reaction. As expected, a great improvement of the EOR activity was found in alkaline media compare with sulfuric acid media, providing good expectative for these materials as catalysts for alkaline direct ethanol fuel cells., This work has been supported by Fundación Cajacanarias (project BIOGRAF) and the Ministry of Economy and Competitiveness (MINECO) through the projects CTQ2011-28913- C02-02 and ENE2014-52158-C2-2-R. R.R. is also indebted with the MINECO for the pre-doctoral grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the nature of the carbon support on the activity of Pt/C catalysts for ethanol and carbon monoxide oxidation

  • Rizo, Rubén
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
  • Rodríguez, José Luis
  • Pastor Tejera, Elena
The electrooxidation of ethanol and carbon monoxide on Pt nanoparticles (NPs) supported on carbon nanofibers (CNFs) and carbon blacks (oxidized and non-oxidized) is studied. Quite similar characteristics are found for Pt NPs, including particle size and crystal phases, regardless of the nature of carbon support. Cyclic voltammetries and current-transient curves show higher ethanol oxidation current density for Pt/CNF than for Pt/Vulcan. In situ spectroelectrochemical techniques including Fourier transform infrared spectroscopy (FTIR) and differential electrochemical mass spectrometry (DEMS), are employed in order to identify adsorbed reaction intermediates and products. Pt/CNF results in a lower CO poisoning of the NP surface compared to Pt/Vulcan, allowing higher amount of free Pt active sites for the oxidation of ethanol which leads to the formation of acetic acid during the reaction., This work has been supported by Fundación Cajacanarias (project BIOGRAF) and the Ministry of Economy and Competitiveness (MINECO) through the project ENE2014-52158-C2-2-R and -1-R (co-funded by FEDER). The authors acknowledge the SEGAI services of Universidad de La Laguna for technical assistance and R.R also thanks the MINECO for the pre-doctoral grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

DEMS strategy for the determination of the difference in surface acidity of carbon materials

  • Pérez Rodríguez, Sara
  • García, Gonzalo
  • Lázaro Elorri, María Jesús
  • Pastor Tejera, Elena
2 Figuras. 1 Tabla., Differential electrochemical mass spectrometry (DEMS) was used to establish the difference in surface acidity in sulfuric acid solution between commercially available carbon black (Vulcan) and Vulcan which had been chemically modified with concentrated nitric acid (VulcanO). The mass signal for the m/z = 2 associated with H2 formation was observed to be influenced by functional groups at the carbon surfaces. Analysis of the mass spectra with the help of the Nernst equation allowed us to quantitatively find the difference in surface pH between the two carbon-based materials in acid media. The elevated concentration of functional groups at the VulcanO surface results in a decrease in the local acidity of the surface under these conditions (0.5 M H2SO4), and consequently the hydrogen evolution reaction (HER) is delayed., The authors gratefully acknowledge financial support given by Spanish MINECO (ENE2014-52158-C2-2-R and 1-R). GG acknowledges the Viera y Clavijo program (ACIISI & ULL) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical behavior of the carbon black Vulcan XC-72R: influence of the surface chemistry

  • Pérez Rodríguez, Sara
  • Pastor Tejera, Elena
  • Lázaro Elorri, María Jesús
The effect of chemical surface oxidation of the carbon black Vulcan XC-72R on the capacitance, tolerance to corrosion and electrochemical activity toward the hydrogen evolution reaction (HER) has been studied in 0.1 M NaHCO3. Acid treatments with HNO3 or a HNO3H2SO4 mixture resulted in a progressive introduction of oxygen-containing groups which led to a strong increase of the capacitance and a higher tendency to carbon corrosion. In contrast, an inhibition of the hydrogen evolution current (at potentials more negative than −1.0 V) was observed for oxidized samples in comparison to the un-treated material. HER was also tested in the presence of dissolved CO2 to study the influence of the surface chemistry on the CO2 electroreduction. An inhibition of the H2 evolution current was evidenced in the CO2 saturated electrolyte due to the adsorption of species from CO2 reduction. A strong hydrogen current decrease (65–78%), and thus a higher tendency to adsorb (CO2)red species, was obtained on the original Vulcan and the HNO3-treated samples, in comparison to the carbon oxidized with HNO3H2SO4 (15%), which could be related to the highest content of basic groups of the last carbon., The authors gratefully acknowledge financial support given by Spanish MINECO (ENE2014-52158-C2-1-R and 2-R). S. Pérez-Rodríguez thanks Gobierno de Aragón for the DGA grant. Furthermore, the authors wish to acknowledge Dra. Ana Beatriz García for the TPD measurements., Peer reviewed