RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación
Capítulo o parte de un libro (BookPart)
Effect of geometry of real-size transparent nozzles on cavitation and on the atomizing jet in the near field
[EN] Cavitation inception is very sensitive to the nozzle geometry. Two diesel-like transparent nozzles with sharp and
round inlet edge were investigated under moderate injection pressure. By means of backlight imaging technique,
images were recorded in two regions near the orifice: within ten orifice diameter downstream the nozzle and inside
the nozzle, for different times after start of the injection. A cross-correlation technique was applied to images
downstream the orifice to estimate the average velocity of the spray. The development of the spray was studied
at the transient and full-opened stage, related to the needle lift motion. To analyse the flow inside the nozzle, the
relative size of the vapour pockets was measured on the image and the relative frequency of the occurrence of
cavitation was determined over image series. This approach permits to examine the time variation of the cavitation
occurrence from the inlet to the outlet of the orifice. The results highlight the sensitivity of the cavitating flow to the
shape of the inlet edge. Moreover, the trends of the variation over time of the velocity and of the cavitation frequency
are very similar to each other but different for each geometry, indicating that the characteristics of the diesel spray
in the near field is closely affected by the way cavitation is developing in the nozzle., This work was supported by CANNEx program (ANR-13-TDMO-03), funded from French National Research Agency (ANR).