Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Herramientas TIC y software específico. Un buen complemento en el aula universitaria

  • Peña, Begoña
  • Artal Sevil, Jesús
  • Luesma Bartolomé, María
  • Gargallo Castel, Ana
[EN] This document presents an educational methodology Simulation-based learning (SbL) centered on the student through the application of an activecollaborative strategy. The incorporation of technology in the classroom has allowed to change the way in which students interact with information and content. The strategy is based on the use of specific software supplemented with a series of free ICT tools. The results show how the methodology has two main advantages. On the one hand, it facilitates obtaining technical and personal skills. While on the other hand the students solve real problems. The objective has been to show an interdisciplinary experience within the Flipped Classroom pedagogical approach, [ES] En este documento se presenta una metodología educativa Simulation-based Learning (SbL) centrada en el estudiante mediante la aplicación de una estrategia activa-colaborativa. La introducción de la tecnología en las aulas ha permitido cambiar la forma en la que los estudiantes interactúan con la información y contenidos. La estrategia está basada en el uso de software específico complementado con una serie de herramientas TIC gratuitas. Los resultados muestran cómo la metodología posee dos ventajas principales. Por un lado facilita la obtención de competencias técnicas y personales. Mientras que por otro lado los estudiantes resuelven problemas reales. El objetivo ha sido mostrar una experiencia interdisciplinar dentro del enfoque pedagógico Flipped Classroom., Los autores agradecen el apoyo financiero de la Universidad de Zaragoza para el desarrollo del presente trabajo, a través del Programa de Innovación e Investigación Educativa para Grupos de Profesores del Vicerrectorado de Política Académica de la Universidad de Zaragoza (PIIDUZ 2017/18). El trabajo aquí mostrado se ha desarrollado dentro del marco de los proyectos con los siguientes identificadores: PIIDUZ_17_299 y PIIDUZ_17_059.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Direct plastic analysis of steel structures by flexibility-based element with initial imperfection

  • Liu, Yaopeng
  • Shu, G. P.
  • Chan, Siu Lai
[EN] Second-order direct analysis has been used in some regions for reliable analysis and design of steel structures. Currently, the stiffness-based element is widely used with accuracy improved by enforcing equilibrium along mid-span or “stations” along the member length in order to achieve equilibrium which is not guaranteed along an element. In this paper, a flexibility-based beam-column element considering member imperfection based on Hellinger-Reissner functional is developed and used for practical second-order direct analysis. This new element is a flexibility-based element with member initial bowing at the element level for direct analysis of three-dimensional frame analysis whereas previous flexibility-based elements assumed perfectly straight geometry for the element. The fiber plastic hinge approach is adopted to account for the distributed plasticity of a section. The new flexibility-based element performs excellently for modeling of members under high stress with material yielded as the conventional stiffness-based element has less accuracy when few elements are used in modeling a plastic member. This will significantly enhance accuracy and computational efficiency for direct plastic analysis which can then be more widely used in practical design. Several examples are employed to validate the accuracy and efficiency of the proposed element along this line of thought., The authors are grateful for financial support from the Research Grant Council of the Hong Kong SAR Government on the projects “Second-order Analysis of Shallow Dome Structures made of Tapering Members (PolyU 152047/17E)” and “Second-Order Analysis of Flexible Steel Cable Nets Supporting Debris (PolyU 152008/15E) ”; from the Innovation and Technology Fund of the Hong Kong SAR Government for the project “Development of an Energy Absorbing Device for Flexible RockFall Barriers (ITS/059/16FP) ”; and from the Hong Kong Branch of the Chinese National Engineering Research Centre for Steel Construction of The Innovation and Technology Fund of the Hong Kong SAR Government for the project “Advanced Numerical Analyses for Building Structures Using High Performance Steel Materials”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Second-order Direct Analysis of Steel Structures made of tapered members

  • Chan, Siu-lai
  • Liu, SW
  • Liu, YP
[EN] Mild steel hot-rolled sections are commonly prismatic because of the rolling process with a furnace, but welded sections made from steel plates do not have such a constraint, especially when robotic welding machines are used. The weight saving could be very significant by, say, using wide flanged section at mid-span and a small flanged section at ends of a simply supported beam. However, design codes do not provide formulae for buckling check of tapered members. This paper proposes a code-free second-order direct analysis for stabilty design of steel frames made of tapered members. The design is further applied to a single layered mega space frame of 136m span. In the whole design process based on the concept of Second-order Direct Analysis, no uncertain effective length and independent member buckling checking are required., The authors are grateful to the financial supports by the Research Grant Council of the Hong Kong SAR Government on the project “Second-Order Analysis of Shallow Dome Structures Made of Tapering Members (PolyU 152047/17E)” and Second-Order Analysis of Flexible Steel Cable Nets Supporting Debris (PolyU 152008/15E)” and support by Innovation and Technology Fund of the Hong Kong SAR Government for the project “Development of an energy absorbing device for flexible rock-fall barriers (ITS/059/16FP)” and by the Hong Kong Branch of Chinese National Engineering Research Centre for Steel Construction of The Innovation and Technology Fund of the Hong Kong SAR Government for the project Advanced Numerical Analysis for Building Structures using High Performance Steel Materials".