Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 59
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

An accounting framework recognising the complexity of the nexus

  • Giampietro, Mario|||0000-0002-5569-7023
  • Renner, Ansel|||0000-0002-7706-6329
  • Cadillo Benalcazar, Juan José|||0000-0002-9747-926X
This chapter presents a structured approach to quantitative analysis of the water-energy-food resource nexus based on the multi-scale integrated analysis of societal and ecosystem metabolism (MuSIASEM) accounting framework. Concerning a social-ecological system of interest, the presented approach focuses on addressing: (i) system size and state; (ii) the environmental pressures associated with a particular size and state; (iii) the level of system openness, referring primarily to the role of externalization in the stabilization of both state and pressure; and (iv) the ecological impacts resulting from a localized contextualization of environmental pressures. An integrated toolkit consisting of four criteria of performance, four data matrices and four scopes/lenses is presented. The presented toolkit is proposed to be used by sustainability analysts. In illustrating the value-added of the toolkit, practical considerations and empirical results concerning agriculture in Europe are presented.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

El estudio de aplicaciones de los sistemas de ecuaciones diferenciales ordinarias a través de artículos científicos

  • Vidal Meló, Anna
  • Estruch Fuster, Vicente D.
[ES] En el estudio de las Ecuaciones Diferenciales Ordinarias, y sistemas de estas, es importante la aplicación a casos reales a través de la modelización matemática. En la bibliografía existen muchas referencias a diversas aplicaciones clásicas: desintegración radiactiva, modelos de población depredador-presa, poblaciones de Lotka-Volterra o epidemias modelos SIR. En este trabajo mostramos cómo se ha ampliado el estudio de estas aplicaciones a través del manejo de artículos científicos disponibles en la red, en una asignatura optativa del Grado en Ingeniería de Sistemas de Telecomunicación, Sonido e Imagen en la EPSG, en una de sus unidades didácticas referida al estudio de las ecuaciones y sistemas de ecuaciones diferenciales. Nuestro alumnado ha trabajado con artículos científicos explorando otras aplicaciones o generalizaciones de las analizadas en clase: modelos matemáticos sobre las consecuencias de la vacunación, modelización y simulación del comportamiento epidemiológico de la gripe, una invasión zombi, modelado de la propagación de malware en redes de sensores inalámbricos, de ordenadores o en teléfonos móviles. Describiremos la metodología seguida, el trabajo realizado por el alumnado y su opinión., Este trabajo ha sido financiado por la Universitat Politécnica de València en el marco de los Proyectos de Innovación y Mejora Educativa (PIME/2017/B/15).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Towards smart open dynamic fleets

  • Billhardt, Holger
  • Fernández, Alberto
  • Lujak, Marin
  • Ossowski, Sascha
  • Paz, Juan F. De
  • Hernández, Josefa Z.
  • Julian, Vicente|||0000-0002-2743-6037
Nowadays, vehicles of modern fleets are endowed with advanced devices that allow the operators of a control center to have global knowledge about fleet status, including existing incidents. Fleet management systems support real-time decision making at the control center so as to maximize fleet perform‐ ance. In this paper, setting out from our experience in dynamic coordination of fleet management systems, we focus on fleets that are open, dynamic and highly autonomous. Furthermore, we propose how to cope with the scalability problem as the number of vehicles grows. We present our proposed architecture for open fleet management systems and use the case of taxi services as example of our proposal., Work partially supported by Spanish Government through the projects iHAS (grant TIN2012-36586-C03) and SURF (grant TIN2015-65515-C4-X-R), the Autonomous Region of Madrid through grant S2013/ICE-3019 (“MOSI-AGIL-CM”, cofunded by EU Structural Funds FSE and FEDER) and URJC-Santander (30VCPIGI15).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Novel Probes and Carriers to Target Senescent Cells

  • Lozano-Torres, Beatriz
  • Blandez, Juan F.
  • Sancenón Galarza, Félix|||0000-0002-5205-7135
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
Detecting senescent cells has become a task of increasing importance in recent years. The implication of cellular senescence in a variety of physiological processes as well as in various diseases is the main reason why potential diagnostic tools for senescent cells are sought. This chapter clearly and concisely addresses the discussion of the published tools (molecular based probes and nanocarriers) to carry out the diagnosis of senescent cells both in vitro and in vivo and in tissues. The comprehensive reading of this chapter will allow the reader to overview the advances in the area of the detection of cellular senescence using probes and carriers as diagnostic methods.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Multivariate statistical technique over QoS variables to analyze video quality metrics on IEEE 802.11ac networks

  • García-Pineda, Miguel
  • Felici-Castell, Santiago
  • Segura-Garcia, Jaume
[EN] We present the results from a measurementbasedperformance evaluation of wireless networks basedon IEEE 802.11ac standard in an indoor environment, withthe aim to analyze their performance under high definitionstreaming video applications. We focus our study on analyzingthe highest performance of these standards using off-theshelfequipment as well as the behavior of Quality of Servicevariables and how they affect to the video quality. Thus, wehave analyzed and measured these variables and have applieda multivariate statistical technique, called Factor Analysis,and finally discuss their behavior., This work was supported by the Universitat de Valencia under the projects UV-INV-PRECOMP14-207134, UVINVAE15-339582, by the Generalitat Valenciana under the project GV-2016-002 and by the Ministry of Economy under the project BIA2016-76957-C3-1-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Aprendizaje basado en proyectos: Primera experiencia en la asignatura de Física del Grado en Ingeniería de Telecomunicación, Sonido e Imagen

  • Alba, Jesus|||0000-0002-4188-854X
  • Torregrosa Cabanilles, Constantino|||0000-0002-2786-3549
  • del Rey, Romina|||0000-0001-5907-0677
[EN] This paper presents an implementation of the project based learning methods to Introductory Physics courses of the Telecommunication, Sound and Image Engineering Degree. This first project starts at the last lessons of the subject, devoted to magnetic field and electromagnetic induction. It has been organized in terms of practical projects that the students can choose voluntarily. Here we show how this active methodology was organized, from the context, aims, previous questions, procedures, planning, types of activities, working groups, until the evaluation and conclusions, [ES] Esta comunicación trata sobre la prueba de aplicación del aprendizaje basado en proyectos en la asignatura de Física del Grado en Ingeniería de Telecomunicación, Sonido e Imagen. Se realiza esta primera experiencia donde el último bloque temático dedicado al campo magnético y a la inducción magnética se articula en forma de proyectos que los alumnos eligen de forma voluntaria. En la comunicación se resumen cómo se ha articulo esta metodología activa, desde el contexto, objetivos, preguntas motrices, enunciado, planificación, tipos de actividades, interdependencia, valoración y conclusiones., Los autores agradecen al Vicerrectorado de Estudios, Calidad y Acreditación y al Instituto de Ciencias de la Educación de la Universidat Politècnica de València la concesión del Proyecto de Innovación y Mejora Educativa en la convocatoria 2014 “A02/14 Metodologías activas en aprendizaje multidisciplinar. Protocolo de creación de catálogos o mapas de motivación de título” que permite tener financiación para la presentación de este trabajo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Marcadores para una herramienta de evaluación de Wikis

  • Vidal-Carreras, Pilar I.|||0000-0001-5206-3730
  • Canós-Darós, Lourdes|||0000-0002-9609-2880
  • García Sabater, José Pedro|||0000-0002-9097-2852
[EN] A wiki is a website that can be edited easily by a user or any number of users. It can be stated that its use in the field of education is reasonably extended. However, assesment of the wiki is an emerging research line. According to the Spanish higher education system, raise the wiki activity as evaluable activity involves the evaluation by the teacher of both the quality of the wiki itself as competences developed through the activity. The electronic support of the wiki facilitates obtaining several automatic indicators such as number of words, number of links, number of figures, number of sources, etc., that could facilitate the task of the evaluation. Establishing connections between these indicators and the quality of the wiki as well as the competences developed during the activity is the main objective of this work, [ES] Una wiki es un sitio web que puede ser editado fácilmente por cualquier número de usuarios. Se puede afirmar que su uso en el ámbito de la educación está razonadamente extendido. Sin embargo, la evaluación de la wiki es una línea de trabajo emergente. En el marco del sistema universitario español, plantear la actividad wiki como actividad evaluable implica la evaluación por parte del profesor tanto de la calidad de la propia wiki como de la/s competencia/s desarrolladas a través de la actividad. El soporte electrónico de la wiki facilita la obtención de una serie de marcadores automáticos tales como nº de palabras, nº de links, nº de figuras, nº de fuentes, etc., que podrían facilitar la tarea de evaluación del profesor. El establecimiento de las conexiones entre dichos marcadores y la calidad de la wiki así como las competencias desarrolladas durante la actividad es el objetivo fundamental del presente trabajo., El presente trabajo se ha desarrollado en el marco del PIME 08/15 "WIKI en la docencia: diseño de una herramienta para evaluar la actividad del alumno" de la Universidad Politécnica de Valencia
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Analytical / Computational Approach to Liquid Spray Heating and Vaporization at Supercritical Pressures

  • Jorda Juanos, Albert
  • Sirignano, William
[EN] Our findings from two areas of background research will define an approach to the study of liquid spray heating and vaporization in gases at supercritical pressure: (i) vaporizing droplets at supercritical pressure and (ii) supercritical combustion in simple configurations, e.g., counterflow. The a priori conclusion that only one phase exists at supercritical pressure is based on false “lore” and not physical law. The question about the phases must be left open until the analysis reaches a conclusion; a proper approach will be defined. Proper equations of state for density and enthalpy and the determination of phase equilibrium, liquid composition due to dissolved gas, energy of vaporization, surface tension, and transport properties for high pressures will be discussed. The case of an isolated droplet will be reviewed and origin of the transcritical concept will be explained. A counterflow spray configuration at pressures above the liquid critical pressure will be analyzed. The concept of shifting phase equilibrium will be applied as the droplets in the spray heat. Hydrocarbon liquids and oxidizing gaseous environments will be studied. Differences between real fluids and ideal fluids at high pressures will be emphasized. Proper rules for gaseous mixtures and liquid solutions will be discussed., This research was supported by the NSF under Grant CBET-1333605 and AFOSR under Grant FA9550-15-1-0033. The first author appreciates the Balsells Fellowship support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Introducción de la evaluación del trabajo en equipo en la asignatura Vibraciones Mecánicas

  • Rovira, Andres|||0000-0001-8192-5571
  • Bolumar Latorre, Casto Sebastián|||0000-0001-9184-1099
  • Lajara-Camilleri, Natalia|||0000-0002-1376-3133
  • Bañón Gomis, Alexis Jacobo
[EN] With the implementation of the curriculum of the European Higher Education Area (EHEA ) a new training paradigm, based on competencies, is adopted. This article discusses the implementation of the training and assessment of the teamwork and leadership competency in pilot groups of the Mechanical Vibrations course of the degree in Mechanical Engineering. For the training of the competency in classroom it was used a good practice guide, which seeks to influence and give pause to students in the interpersonal dimension that involves teamwork. This document provides recommendations and suggestions for good management of social relations and achieve a strategy of working together. The work presented is part of the dissemination of the results of an innovation project carried out in this course 2014-2015., [ES] Con la implantación de los planes de estudio del Espacio Europeo de Educación Superior (EEES) se adopta un paradigma de formación en competencias.En este artículo se presenta la implementación de la formación y evaluación de la competencia transversal de trabajo en equipo en grupos piloto de la asignatura Vibraciones Mecánicas del plan de estudios de Grado en Ingeniería Mecánica.Para el trabajo de la competencia en el aula se ha utilizado una guía de buenas prácticas, que busca incidir y hacer reflexionar a los alumnos en la dimensión interpersonal que implica el trabajar en equipo. Este documento presenta recomendaciones y consejos para conseguir una buena gestión de las relaciones sociales y lograr una estrategia de trabajo en común. Para la evaluación, se ha considerado tanto el producto como el proceso seguido. Por un lado, los profesores han calificado el trabajo realizado por los alumnos; por otro lado, los alumnos han evaluado su propia actuación en el grupo a través de un cuestionario de autoevaluación. Este trabajo expuesto forma parte de la difusión de los resultados obtenidos en un Proyecto de Innovación y Mejora Educativa (PIME) llevado a cabo en el presente curso 2014-2015., Este trabajo ha sido financiado por el Vicerrectorado de Estudios, Calidad y Acreditación y la Escuela Técnica Superior de Ingeniería del Diseño (ETSID) de la Universitat Politècnica de València (UPV) a través de la convocatoria de ayudas para PIME 2014-2015, con el proyecto código B019.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

MediaDASH Tool: Plataforma Web para la Codificación, Difusión y Recepción de Videos DASH

  • García-Pineda, Miguel
  • García-Costa, Daniel
  • Hannecke-Esteve, Jonatan
  • Felici-Castell, Santiago
  • Segura-García, Jaume
[ES] Hoy en día el tráfico de video de internetsignifica alrededor del 65-70% del tráfico total. Se prevéque en 2019 aumente hasta el 80%. Debido a esto se hacenecesario optimizar y mejorar las tecnologías relacionadascon la transmisión de video para garantizar una calidad deexperiencia adecuada. Es por ello que se están desarrollando nuevos protocolos de transmisión de videoadaptativos basados en DASH. Debido a que su uso estáaumentando en los últimos años para realizar streamingsobre HTTP. En este artículo presentamos la herramientaMediaDASH Tool, la cual es una aplicación web quepermite de manera muy intuitiva poder comprimir ypreparar videos para su difusión con DASH. Así como suposterior visualización a través de la misma plataforma.Esta herramienta puede ser de gran utilidad para usuariosfinales que quieran disponer de su sistema DASH comotambién para investigadores que quieran testear suscontenidos multimedia haciendo uso de estos protocolos., Este trabajo ha sido parcialmente subvencionado por la Universitat de València a través de los proyectos UVINV-PRECOMP14-207134, UV-INVAE15-339582, por la Generalitat Valenciana a través del proyecto GV2016-002 y por el Ministerio de Economía a través del proyecto BIA2016-76957-C3-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

El uso de Facebook para mejorar la educación en la Asignatura Cultura Organizacional

  • Estelles-Miguel, Sofia|||0000-0001-6119-373X
  • Garrigós Simón, Fernando José|||0000-0001-6580-9124
  • Albarracín Guillem, José Miguel|||0000-0001-6130-9405
  • Palmer Gato, Marta Elena
  • Narangajavana, Yeamduan
[EN] The development of information technologies, specially the evolution of social networks, like Facebook, is affecting the new educational framework. Understanding the process is very important for educational organizations, since it involves the creation and posible use of new opportunities, and the development of processes to enhance learning and collaboration between students and profesors. This paper considers the possibilities of these processes for improving teaching methods which may be applied to the university education in a subject of Organizational Culture. Specifically, the paper focuses on the new possibilities of using Facebook to promote enhanced learning. The study concentrates on the use of Facebook to improve the creation and evaluation of Organizational Culture subject., [ES] El desarrollo de las tecnologías de la educación (TIC), especialmente la evolución de las redes sociales, como Facebook, esta afectando al marco educativo. Comprender este proceso es muy importante para las organizaciones educativas, ya que incluye la creación y posible utilización de nuevas oportunidades, y el desarrollo de procesos que mejoren la educación y la colaboración entre profesores y estudiantes. Este artículo considera la posibilidad de que estos procesos mejoren los métodos educativos y puedan ser aplicados en la educación universitaria de Cultura Organizacional. El artículo se enfoca específicamente en las nuevas oportunidades que el uso del Facebook da al aprendizaje. Este estudio se concentra en el uso del Facebook en crear la evaluación de la asignatura de Cultura Organizacional., Agradecemos la financiación de la Universitat Politècnica de valència, con el programa PIME 2014-2015.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

El Trabajo Fin de Grado en el Grado de Criminología: una herramienta de integración de competencias para los estudiantes y una experiencia de trabajo coordinado para los profesores

  • Cerezo Domínguez, Ana
  • Benítez Jiménez, María
  • Arenas García, Lorea
[EN] In the Faculty of Law at the University of Malaga we have created an educational tool that aims students to achive an optimal level in developing the final degree work, compulsory subject in the last year of the Criminology studies. To do this, teachers will be working with students fron the first year all the necessary skills to achive this objective. In a coordinated way, by semester and year, each teacher will perform with students certain educational activities that allow the acquisition of skills such as improving written expression, proper management of ICT, the correct use of quotations literature, developing group work and oral expression, among others., [ES] En la Facultad de derecho de la Universidad de Málaga hemos creado una herramienta docente que persigue que los alumnos alcancen un nivel óptimo en la elaboración del trabajo fin de grado, asignatura obligatoria del último curso del Grado de Criminología. Para ello, los profesores van a ir trabajando con los alumnos, desde el primer curso, todas las competencias necesarias para alcanzar este objetivo. De forma coordinada por curso y semestre, cada profesor realizará con los alumnos determinadas actividades docentes que permitan la adquisición de competencias tales como la mejorar la expresión escrita, el manejo adecuado de las tecnologías de la información y de la comunicación, la utilización correcta de citas bibliográficas, la elaboración de trabajos en grupo así como la expresión oral, entre otras., El presente trabajo forma parte del Proyecto de Innovación Educativa denominado "El Trabajo Fin de Grado en la Facultad de Derecho: una herramienta de integración de competencias para los estudiantes y una experiencia de trabajo coordinado para los profesores", PIE 15-75. Entidad financiadora: Universidad de Málaga. Duración 01/01/2015 a 01/01/2017 (24 MESES) Investigadora principal: CARMEN MARÍA ÁVILA RODRÍGUEZ. Número de investigadores participantes: 41.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Study of the soot quantification for two-stage injection of hydrogenated catalytic biodiesel in a constant-volume combustion chamber

  • Cao, Jiawei
  • He, Zhixia
  • Li, Bei
  • Zhong, Wenjun
  • Wang, Mei
[EN] The effect of two-stage injection strategies on the soot formation of 0# fossil diesel were investigated experimentally using a constant volume combustion chamber. The ambient conditions was kept constant as injection pressure 150 MPa, ambient gas temperature 900 K, ambient gas pressure 45 bar. A high-speed diffused back-illumination extinction imaging technique was employed to make quantitative measurement on temporal soot evolution and reacting spray liquid length and a direct high-speed camera was used to measure the ignition delay. Two-stage injection strategies were varied with different pilot and main injection time, including a sweep of dwell time in pilotmain injection and pilot injection duration. The results show that the ignition delay decreases with the increasing dwell time. It may result from the entrained surrounding gas enhance the spray combustion process. In the reacting condition, the liquid-phase penetration is slightly longer with the shorter dwell time. However, the pilot injection duration shows slighter impact. The longer dwell time contributes to more total soot mass while the different pilot injection duration barely affect the total soot mass of the main injection., This research was supported by the National Natural Science Foundation of China (No. 51176066). Practice Innovation Project of Jiangsu Province (SJLX15_0491) and Natural Science Foundation of Jiangsu Province (BK20161349).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Uso de Software-Defined Radio en la enseñanza de sistemas de comunicaciones

  • Segura-Garcia, Jaume
  • Soriano Asensi, Antonio
  • Botella, Carmen
  • Felici-Castell, Santiago
  • García-Pineda, Miguel
[ES] En la docencia de sistemas de comunicación hay una componente teórica elevada. La percepción de los estudiantes al estudiar estas asignaturas es negativa. Este trabajo trata de explicar la motivación y la estrategia seguida para reorientar esta percepción a partir de la introducción de elementos de “Software-Defined Radio” (SDR) y “Universal Software Radio Peripherals” (USRP) en diferentes asignaturas del Grado de Ingenier´ıa Telem´atica de la Universitat de València, Los autores quieren agradecer al Servei de Formació Permanent i Innovació Educativa - Centre de Formació i Qualitat "Manuel Sanchis Guarner" de la Universitat de València por la ayuda concedida para el soporte parcial de este proyecto de innovación docente (ref: UVSFPIE_RMD15-314373) y la Ministerio de Economía e Innovación por la ayuda con referencia TEC2013-47141-C4-4-R con la que se ha financiado parcialmente este trabajo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Modeling, analysis and energy optimization of an air source heat pump system for SHW production

  • Masip Sanchis, Ximo
  • Corberán, José M.
  • Cazorla-Marín, Antonio|||0000-0003-3314-0395
  • Montagud- Montalvá, Carla|||0000-0002-7118-6119
  • Marchante-Avellaneda, Javier|||0000-0001-5680-5033
In order to fulfill with the European normative EN-1717:2000 regarding the general requirements of devices to prevent pollution of potable water by backflow, in those systems using a heat pump (HP) for the production of sanitary hot water (SHW), the coupling of the HP with the storage tank must be indirect. This paper will analyze three of the possible coupling configurations for the case of an air source heat pump system: (i) external brazed plate heat exchanger, (ii) coil heat exchanger inside the storage tank and (iii) double wall condenser at the heat pump. The system will be modeled using a dynamic simulation tool (TRNSYS). The aim of this work is to compare the energy performance of each configuration and to optimize its operation., The present work has been supported by the European Community Horizon 2020 Program for European Research and Technological Development (2014-2020) inside the framework of the project 656889 – GEOTeCH (Geothermal Technology for Economic Cooling and Heating), by the Generalitat Valenciana inside the program “Ayudas para la contratación de personal investigador en formación de carácter predoctoral (ACIF/2016/131)” and by the Ministerio de Educación, Cultura y Deporte inside the programme ‘Formación de Profesorado Universitario (FPU15/03476)’
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

TRNSYS modelling and energy assessment of a dual source heat pump system

  • Cazorla-Marín, Antonio|||0000-0003-3314-0395
  • Montagud- Montalvá, Carla|||0000-0002-7118-6119
  • Marchante-Avellaneda, Javier|||0000-0001-5680-5033
  • Corberán, José M.
Ground source heat pump systems are recognized as one of the most energy efficient renewable systems for heating, cooling and domestic hot water production in buildings. However, the high cost of the Ground Source Heat Exchanger (GSHE) is still a handicap for its widespread use in Europe. In this context, the use of an innovative dual source (air/ground) heat pump developed in the framework of the H2020 Geot ch project could contribute to reduce both the total size of the GSHE and the annual energy consumption of this type of systems. This is possible thanks to the heat pump capability of selecting the most favourable source/sink, with a consequent lower amount of heat exchange needed with the ground. However, the convenience of considering this type of systems is not always straightforward, as it depends on the type of climatological conditions, the thermal demand profile and the ground thermal properties. This assessment is carried out, by means of a complete model developed in TRNSYS, for three different cities in Spain., The present work has been supported by the European Community Horizon 2020 Program for European Research and Technological Development (2014-2020) inside the framework of the project 656889 – GEOTeCH (Geothermal Technology for Economic Cooling and Heating), by the Generalitat Valenciana inside the program “Ayudas para la contratación de personal investigador en formación de carácter predoctoral (ACIF/2016/131)” and by the Ministerio de Educación, Cultura y Derporte inside the program “Formación de Profesorado Universitario (FPU15/03476)”
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Microwave Annealing of Powder Metals without Sintering

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Intermittent–microwave and convective drying of parsley

  • Szadzińska, Justyna
  • Mierzwa, Dominik
[EN] The studies present convective drying of parsley with an intermittent microwave application. Eight different drying programs including convective drying (CV) were carried out in a laboratory-scale hybrid dryer. The influence of intermittent conditions on drying time, drying rate, energy efficiency and product quality was analysed. The results demonstrated that intermittent–microwave convective drying improves the drying kinetics and reduces energy consumption. Moreover, a higher retention of vitamin C, smaller color change and a better ability to rehydration were observed for the parsley samples dried using intermittent drying than for CV., This study was conducted as a part of research project no. 2014/15/D/ST8/02777 sponsored by the National Science Centre in Poland.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Diseño de una bomba de calor de 8 kW con foco de calor dual: aerotermia y geotermia

  • Marchante-Avellaneda, Javier|||0000-0001-5680-5033
  • Cazorla-Marín, Antonio|||0000-0003-3314-0395
  • Montagud- Montalvá, Carla|||0000-0002-7118-6119
  • Corberán, José M.
Debido a la actual preocupación por la preservación del medio ambiente y la reducción de emisiones de CO2, los fabricantes de equipos frigoríficos y bombas de calor invierten mucho tiempo en diseños más eficientes, que cumplan con la actual normativa para el uso de refrigerantes con menor Potencial de Calentamiento Atmosférico (PCA). Nace así el proyecto GEOTeCH, financiado por la Comisión Europea dentro del programa H2020, con el objetivo de encontrar soluciones constructivas para las bombas de calor del futuro, más eficientes y respetuosas con el medio ambiente. Este artículo describe las etapas de diseño de una innovadora bomba de calor dual con dos posibles fuentes de calor: geotérmica y aerotérmica. El diseño final es capaz de funcionar con la máxima eficiencia dando servicio independiente de refrigeración, calefacción y producción de agua caliente sanitaria durante todo el año, haciendo uso de R32 como refrigerante., El presente trabajo cuenta con financiación de la Unión Europea en el marco del Programa Marco Horizonte 2020 de Investigación y Desarrollo Tecnológico Europeo (2014-2020) en el marco del proyecto 656889 GEOTeCH (Geothermal Technology for Economic Cooling and Heating). También se ha recibido financiación por parte de la Generalitat Valenciana en el marco del programa 'Ayudas para la contratación de personal investigador en formación de carácter predoctoral (ACIF / 2016/131)' y por parte del Ministerio de Educación, Cultura y Deporte dentro del programa Formación de Profesorado Universitario (FPU15/03476)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Effects of Injection Nozzle Geometry on Spray Characteristics for Direct Injection Diesel Engines

  • Tamaki, Nobushige
  • Harada, Takato
[EN] The purpose of this study is to improve the spray characteristics of a direct injection Diesel nozzle. Spray atomization of the multi-hole atomization enhancement nozzle, which was invented in previous studies, is explored. The aim is to improve and obtain excellent spray characteristics. The effects of different nozzle geometries and dimensions on spray characteristics are investigated, including chamfered and rounded nozzle hole inlets and a multi-hole atomization enhancement nozzles. It is found that the multi-hole atomization enhancement nozzle with a rounded chamfered inlet is effective in achieving a high-dispersion spray, a large spray angle and small droplets. However, it should be noted that the spray is significantly atomized and a large number of small droplets as suspended as a mist. The photographic images of the spray are taken against a white background and the boundaries between the ejected spray and the background are indistinct. Furthermore, the breakup length is short at 3 mm for a hole diameter of 0.3 mm, the spray angle is about 70° and the Sauter mean diameter decreases dramatically to 15 μm at a low injection pressure of 10 MPa, This research was partly supported by the Japan Society for the Promotion of Science (JSPS) KAKENHI (C) Grant Number 15K05847 and also partly supported by the Ministry of Education, Culture, Sports, Science and Technology (MEWT) MEXT-Supported Program for the Strategic Research Foundation at Private Universities. The authors wish to express their thanks for the supporting for this research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Vídeos cortos realizados por los alumnos como recurso docente. Diferentes enfoques

  • Azuara Guillén, Guillermo
  • Fernández Iglesias, Diego
  • López Torres, Ana María
  • Salinas Baldellou, Ana María
  • Aguilar Martín, María Carmen
  • Salazar Riaño, José Luis
  • Fernández-Navajas, Julián
  • Cacheda Seijo, Fidel
  • Nóvoa de Manuel, Francisco Javier
  • Carneiro Díaz, Victor Manuel
[ES] Este trabajo presenta el desarrollo y análisis de los resultados de un proyecto de innovación docente basado en la creación por parte de los alumnos de vídeos cortos, de 3 o 4 minutos de duración, donde deben exponer algún concepto o tema propuesto por el profesor. En esta actividad los alumnos trabajan las competencias digitales, búsqueda y síntesis de la información, comunicación, trabajo en grupo y por mediante el uso de la coevaluación la capacidad de crítica. La experiencia se ha desarrollado de forma conjunta con asignaturas y docentes de diversas universidades, titulaciones y cursos. A partir de unas pautas comunes, en cada asignatura se ha adaptado la experiencia al contexto específico de cada una, lo que permite diferentes enfoques., Este proyecto ha sido parcialmente financiado por la convocatoria de innovación docente de la Universidad de Zaragoza para los cursos 2015/16 y 2016/17 (Proyectos PIIDUZ_15_411 y PIIDUZ_16_070), Ministerio de Economía y Competitividad de España (Proyecto TIN2015-70648-P y TIN2015-64770-R), Fondo Social Europeo y Gobierno de Aragón (grupo de investigación reconocido T98).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Internal flow and air core dynamics in simplex and spill-return pressure-swirl atomizers

  • Maly, Milan
  • Janáčková, Lada
  • Jedelský, Jan
  • Sláma, Jaroslav
  • Sapík, Marcel
  • Wigley, Graham
[EN] It is well known that the spray characteristics of pressure-swirl atomizers are strongly linked to the internal flow and that an unstable air core may cause instabilities in the spray. In this paper, a 10:1 scale transparent Plexiglas (PMMA) model of a pressure-swirl atomizer as used in a small gas turbine is introduced. The internal flow was examined using high-speed imaging, laser-Doppler anemometry and computational fluid dynamics tools. The experimental and numerical results were analysed and compared in terms of the air core morphology and its temporal stability. Two different liquids were used, Kerosene-type Jet A-1 represented a commonly used fuel while p-Cymene (4-Isopropyltoluene) matched the refractive index of the Plexiglas atomizer body. The internal flow characteristics were set using dimensionless numbers i.e. the Reynolds number and Froude number. The flow test conditions were limited to inlet Reynolds numbers from 750 to 1750. Two atomizers were examined to represent a Simplex and Spill-return (SR) geometries. In a comparative manner, the SR atomizer features a central passage in the rear wall of the swirl chamber. The main advantage of this concept is that the fuel is always supplied to the swirl chamber at a high pressure therefore providing good atomization over a wide range of the injection flow rate. However, the presence of the spill orifice strongly affects the internal flow even if the spill-line is closed. The air core in the Simplex atomizer was found fully developed and stable. The SR atomizer behaved differently, the air core did not form at all, and the spray was therefore unstable., This work has been supported by the project No. GA15-09040S funded by the Czech Science Foundation and the project LO1202 NETME CENTRE PLUS with the financial support from the Ministry of Education, Youth and Sports of the Czech Republic under the "National Sustainability Programme I" and project Reg. No. FSI-S-17-4444 funded by the Brno University of Technology.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Study of the Optimum Frequency at 2.4GHz ISM Band for Underwater Wireless Ad Hoc Communications

  • Sendra, Sandra|||0000-0001-9556-9088
  • Lloret, Jaime|||0000-0002-0862-0533
  • Ardid, Miguel|||0000-0002-3199-594X
  • Lamparero Arroyo, José Vicente
Underwater communications at low frequencies are characterized by the low data rate. But in some cases wireless sensors must be placed quite close to each other and need high data rates in order to accurately sense an ecosystem that could be contaminated by invasive plants or hazardous waste. Most researchers focus their efforts on increasing the data transfer rates for low frequencies, but, due to the wave features, this is very complicated. For this reason, we propose the use of high frequency band communications for these special cases. In this paper we measure the optimum working frequency for an underwater communication in the 2.4 GHz range. We measure the number of lost packets and the average round trip time value for a point-to-point link for different distances. These measures will be performed by varying the data rate, the type of modulation and the working frequency. We will show that we are able to transmit higher data transfer rates, by using higher frequencies, than the using acoustic waves. © 2012 Springer-Verlag., This work has been partially supported by the "Ministerio de Ciencia e Innovación”, through the “Plan Nacional de I+D+i 2008-2011” in the “Subprograma de Proyectos de Investigación Fundamental”, project TEC2011-27516, and by the Polytechnic University of Valencia, though the PAID-15-11 multidisciplinary projects.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Adaptación de metodologías docentes para la enseñanza de problemas en aula informática con el objetivo de formar en competencias de nivel de Máster

  • Gozálvez-Zafrilla, José M.|||0000-0003-4419-6765
  • Santafé Moros, María Asunción|||0000-0002-0933-108X
  • Navarro-Laboulais, J.|||0000-0001-6347-5407
[EN] This work analyzes the adaptation and development of teaching methodologies for problem solving strategies in the subject “Advanced Unit Operations” of the Master in Chemical Engineering for developing transversal key competences. As starting point, it has been used the teaching methodology developed in the former curriculum adapted to the new one. The adaptation was performed through two different ways. On the one hand, problems of open response supported by mathematical software were included. On the other hand, new computational resources, like simulation and design software, were introduced to make the student easier the exploration of different process alternatives. The inclusion of these problems implied changes in the evaluation procedure. The effects of the methodological changes performed are shown in relation with the acquired competences by the students and with the necessary changes in the evaluation procedure. A survey among the students shows a positive opinion in relation to the methodological adaptations performed., [ES] En este trabajo se analiza la adaptación y desarrollo de metodologías docentes para el aprendizaje de la resolución de problemas en la asignatura del Máster de Ingeniería Química “Operaciones de Separación Avanzadas” con el objetivo de desarrollar competencias transversales. Como punto de partida se considera la metodología que desarrollamos para las clases de problemas del plan de estudios previo. La adaptación se realizó a través de dos vías diferentes. Por una parte, se realizaron cambios en el tipo de problemas propuestos y en la forma de evaluación, trabajándose con problemas de tipo más abierto apoyados por software matemático. Por otra parte, se introdujeron nuevos recursos como programas de simulación y de diseño de procesos con el fin de facilitar al alumno la posibilidad de explorar alternativas. Los efectos de estos cambios se indican en este artículo relacionándolos con las competencias que favorecen y con los cambios en el sistema de evaluación necesarios. El análisis de los resultados de una encuesta mostró una opinión favorable hacia las adaptaciones metodológicas realizadas., Los autores agradecen al Vicerrectorado de Estudios y Convergencia Europea y al Instituto de Ciencias de Educación de la Universitat Politècnica de València la concesión del Proyecto de Innovación y Mejora Educativa PIME A26/14 “Desarrollo de estrategias para la mejora del aprendizaje y evaluación de los problemas de Operaciones de Separación”
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Smartphysics: el uso docente del Smartphone para el desarrollo de competencias transversales

  • Sans-Tresserras, Juan Ángel|||0000-0001-9047-3992
  • Cuenca-Gotor, Vanesa Paula|||0000-0003-0819-8528
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
  • Gimenez Valentin, Marcos Herminio
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Salinas Marín, Isabel
[EN] In this paper, we propose to introduce new physics laboratory practices and modify some ones, with the main objective of developing in our students some of the transversal competences established by the Universitat Politècnica de València (UPV), such as critical and practical thinking, understanding and integration, lifelong learning, effective communication, teamwork and leadership. The instrument used to achieve these goals is the smartphone, employed both as a measuring device and as a data recorder. We think the use of the smartphone will be a motivator element for the student since they are used to it and they will have the opportunity to explore new applications of this device., [ES] En este trabajo proponemos introducir nuevas prácticas de laboratorio de física, y modificar algunas existentes, con el objetivo principal de que nuestros estudiantes desarrollen algunas de las competencias transversales establecidas por la Universitat Politècnica de València (UPV), tales como pensamiento crítico, comprensión e integración, aplicación pensamiento práctico, aprendizaje permanente, comunicación efectiva, y trabajo en equipo y liderazgo. El instrumento que vamos a utilizar para alcanzar este objetivo es el teléfono móvil inteligente (smartphone), que operará tanto como dispositivo de medida como de almacenamiento de datos. Creemos que el uso del teléfono móvil será un elemento motivador para el alumno ya que están acostumbrados a su uso y además tendrán la oportunidad de conocer nuevas aplicaciones de este dispositivo., Los autores desean agradecer al Instituto de Ciencias de la Educación de la Universitat Politècnica de València (España) el apoyo a los Grupos de Innovación Docente MoMa y eMACAFI y el apoyo financiero a través del proyecto PIME 2015 B18.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Direct plastic analysis of steel structures by flexibility-based element with initial imperfection

  • Liu, Yaopeng
  • Shu, G. P.
  • Chan, Siu Lai
[EN] Second-order direct analysis has been used in some regions for reliable analysis and design of steel structures. Currently, the stiffness-based element is widely used with accuracy improved by enforcing equilibrium along mid-span or “stations” along the member length in order to achieve equilibrium which is not guaranteed along an element. In this paper, a flexibility-based beam-column element considering member imperfection based on Hellinger-Reissner functional is developed and used for practical second-order direct analysis. This new element is a flexibility-based element with member initial bowing at the element level for direct analysis of three-dimensional frame analysis whereas previous flexibility-based elements assumed perfectly straight geometry for the element. The fiber plastic hinge approach is adopted to account for the distributed plasticity of a section. The new flexibility-based element performs excellently for modeling of members under high stress with material yielded as the conventional stiffness-based element has less accuracy when few elements are used in modeling a plastic member. This will significantly enhance accuracy and computational efficiency for direct plastic analysis which can then be more widely used in practical design. Several examples are employed to validate the accuracy and efficiency of the proposed element along this line of thought., The authors are grateful for financial support from the Research Grant Council of the Hong Kong SAR Government on the projects “Second-order Analysis of Shallow Dome Structures made of Tapering Members (PolyU 152047/17E)” and “Second-Order Analysis of Flexible Steel Cable Nets Supporting Debris (PolyU 152008/15E) ”; from the Innovation and Technology Fund of the Hong Kong SAR Government for the project “Development of an Energy Absorbing Device for Flexible RockFall Barriers (ITS/059/16FP) ”; and from the Hong Kong Branch of the Chinese National Engineering Research Centre for Steel Construction of The Innovation and Technology Fund of the Hong Kong SAR Government for the project “Advanced Numerical Analyses for Building Structures Using High Performance Steel Materials”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Indicadores de comportamiento de la competencia de innovación en el ámbito académico y en el profesional: revisión de la literatura

  • Aznar-Mas, Lourdes E.|||0000-0001-7224-722X
  • Pérez Peñalver, María José|||0000-0003-0403-1405
  • González-Ladrón-de-Guevara, Fernando|||0000-0002-2617-1559
  • Marin-Garcia, Juan A.|||0000-0001-5416-3938
  • Atarés Huerta, Lorena María|||0000-0002-7172-3666
  • Montero Fleta, Maria Begoña
[EN] Companies pay more and more attention to the innovation competence of their employees. Innovation is understood as either the introduction of something such as a product, service, process or method, completely new, or the improvement of something that already exists. This paper presents the work performed by the research group IEMA-UPV so as to improve the INCODE barometer (from their previous European project “Innovation Competencies Development”), to be used by both companies and universities. This barometer has been adopted and will be refined in the framework of their new European project FINCODA (“Framework for Innovation Competencies Development and Assessment”) as a tool to measure and assess the behavioral indicators of the innovation competence, which are being identified through a systematic literature review. As a part of the research being performed, this paper also introduces the new model established by the FINCODA project. In this model, the innovation competence is presented as a cluster with three dimensions: creativity, critical thinking and the third one, intrapreneurship, which includes three sub-dimensions (initiative, teamwork and networking)., [ES] Las empresas valoran cada vez más la competencia de innovación de sus empleados, entendiendo por innovación la introducción de algo (producto, servicio, proceso o método) completamente nuevo o también la mejora de algo que ya existe. Este trabajo presenta el trabajo realizado por el grupo de investigación IEMA-UPV para la mejora del barómetro INCODE (de su proyecto europeo anterior “Innovation Competencies Development”), y la utilización de este tanto en la empresa como en la universidad. Este barómetro ha sido adoptado y será mejorado en el marco de su nuevo proyecto europeo FINCODA (“Framework for Innovation Competencies Development and Assessment”) como instrumento para medir y evaluar los indicadores del comportamiento de la competencia de innovación, que están siendo identificados como resultado de una revisión sistemática de la literatura. Como parte de la investigación que se está realizando, en este trabajo se presenta, asimismo, el nuevo modelo establecido por el proyecto FINCODA, en el que la competencia de innovación se muestra como un conjunto en el que se encuentran integradas tres dimensiones: creatividad, pensamiento crítico y una tercera, intraemprendedurismo, que incluye tres sub-dimensiones (iniciativa, trabajo en equipo y trabajo en red)., Este trabajo ha sido financiado con el Proyecto Erasmus+ Project FINCODA, Framework for Innovation Competences Development and Assessment_554493-EPP-1-2014-1-FIEPPKA2-KA (The European Commission support for the production of this publication does not constitute an endorsement of the contents which reflects the views only of the authors, and the Commission cannot be held responsible for any use which may be made of the information contained therein) y el Proyecto PIME 2015-2016 A/09_Evaluación de los indicadores del comportamiento innovador en el alumno universitario, de la Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Deep-Learning-based Classification of Rat OCT images After Intravitreal Injection of ET-1 for Glaucoma Understanding

  • Fuentes-Hurtado, Félix José
  • Fedulov, Vadim
  • Woldbye, David
  • Klemp, Kristian
  • Torm, Marie
  • Larsen, Michael
  • Morales, Sandra|||0000-0003-0763-1545
  • Mossi García, José Manuel|||0000-0001-9083-3476
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
Optical coherence tomography (OCT) is a useful technique to monitor retinal damage. We present an automatic method to accurately classify rodent OCT images in healthy and pathological (before and after 14 days of intravitreal injection of Endothelin-1, respectively) making use of the DenseNet-201 architecture fine-tuned and a customized top-model. We validated the performance of the method on 1912 OCT images yielding promising results ( AUC=0.99±0.01 in a P=15 leave-P-out cross-validation). Besides, we also compared the results of the fine-tuned network with those achieved training the network from scratch, obtaining some interesting insights. The presented method poses a step forward in understanding pathological rodent OCT retinal images, as at the moment there is no known discriminating characteristic which allows classifying this type of images accurately. The result of this work is a very accurate and robust automatic method to distinguish between healthy and a rodent model of glaucoma, which is the backbone of future works dealing with human OCT images., Animal experiment permission was granted by the Danish Animal Experimentation Council (license number: 2017-15-0201-01213). We gratefully acknowledge the support of NVIDIA Corporation with the donation of the Titan Xp GPU used for this research. This work was supported by the Project GALAHAD [H2020-ICT-2016-2017, 732613]
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Optimal design and operation of a multi-variable heat pump system for sanitary hot water production

  • Masip Sanchis, Ximo
  • Corberán, José M.
  • Cazorla-Marín, Antonio|||0000-0003-3314-0395
  • Montagud- Montalvá, Carla|||0000-0002-7118-6119
  • Marchante-Avellaneda, Javier|||0000-0001-5680-5033
According to the European Commission, buildings are nowadays responsible for the 40 % of the energy consumption and 36 % of CO2 emissions in Europe, corresponding the gross of the energy consumption to the air-conditioning and sanitary hot water (SHW) production systems. Within the introduction of the Near Zero Energy Buildings (NZEB) concept, the percentage of the energy consumption of SHW production systems is expected to dramatically increase. Therefore, in order to reduce the energy usage for SHW production in the residential sector, it will be key the use of highly energy efficient technologies as well as good design, installation procedures, and operation strategies carried out in the facilities. This research work is framed in a H2020 European project titled Geot€ch `GEOthermal Technology for economic Cooling and Heating¿ whose aim is to develop a multi-variable heat pump system solution for heating, cooling and SHW production, making the best use of hybrid HP and control technologies. The present work is focused on optimizing the design and operation of such a multi-variable HP system when it works for SHW production. In this context, it is not only important to maximise the HP efficiency but also to minimize the system efficiency losses that appear when coupling the HP to the storage tank. In order to fulfil with the European normative EN-1717:2000 regarding the general requirements of devices to prevent pollution of potable water by backflow, the coupling of the HP with the storage tank must be indirect. An integrated system model in TRNSYS has been created in order to analyse three different options of indirect coupling: (i) coil heat exchanger inside the storage tank, (ii) external brazed plate heat exchanger and (iii) double wall condenser at the HP. The aim of this work is not only to select the optimal type of HP coupling but also to optimize the system operation for three representative climates existing around Europe. Results conclude that up to 30% of the system energy efficiency can be spoiled either by not selecting the optimal type of coupling or not making the system work under optimal operating conditions., The present work has been supported by the Ministerio de Educación, Cultura y Deporte inside the programme ‘Formación de Profesorado Universitario (FPU15/03476)’
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

La investigación visita el aula: la promoción del conocimiento y la práctica de la investigación como estrategia docente innovadora

  • Santirso, Faraj
  • Martin-Fernández, Manuel
  • Marco, Miriam
  • Vargas, Viviana
  • Lila, Marisol
  • Gracia, Enrique
[EN] Recently, an increasingly number of authors emphasize the benefits of research oriented teaching and the integration of research in the curriculum of undergraduate students. The main aim of this project of educational innovation is to enhance learning based on the promotion of knowledge and the practice of research, emphasizing the processes that are generated in the research work and using an approach in which the student plays the role of an active researcher. In order to assess whether there are changes in the attitudes of the students towards research, the intervention group was compared with a control group of undergraduated students. The results showed that the questionnaire of attitudes towards research was a reliable instrument to assess this variable. Using this questionnaire, significant differences were found in favour of the intervention group in the perceived relevance of the research, the predisposition to choose research as a profession, the perceived competence to investigate and the role of the teacher as a researcher., [ES] En los últimos años cada vez son más los autores que subrayan los beneficios de la enseñanza dirigida desde la investigación y de la integración de la investigación en el currículum de las estudiantes de grado. El objetivo principal de este proyecto de innovación educativa es potenciar el aprendizaje basado en la promoción del conocimiento y la práctica de la investigación de manera que se enfaticen los procesos que se generan en el quehacer investigador y se utilice un acercamiento en el que el estudianteLa investigación visita el aula: la promoción del conocimiento y la práctica de lainvestigación como estrategia docente innovadora2017, Universitat Politècnica de ValènciaCongreso IN-RED (2017)desempeñe el rol de participante activo. A su vez, se pretende evaluar si existen diferencias en las actitudes hacia la investigación entre el grupo que recibe la intervención y un grupo control. Los resultados muestran que el cuestionario de actitudes hacia la investigación es una herramienta fiable en la evaluación de esta variable. Utilizando este cuestionario, se observan diferencias significativas a favor del grupo de intervención en la relevancia percibida de la investigación, la predisposición a elegir la investigación como profesión, la competencia percibida para investigar y el papel del profesor., Este proyecto ha sido realizado en el marco de la convocatoria de innovación del Vicerectorat de Polítiques de Formació i Qualitat Educativa de la Universitat de València (UV-SFPIE_RMD16-417684). Faraj A. Santirso es beneficiario del programa FPU del Ministerio de Educación, Cultura y Deporte (FPU15/00864). Manuel Martin-Fernandez es beneficiario del programa FPI del Ministerio de Economía y Competitividad (BES15/075576). Miriam Marco es beneficiaria del programa FPU del Ministerio de Educación, Cultura y Deporte (FPU13/00164).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Second-order Direct Analysis of Steel Structures made of tapered members

  • Chan, Siu-lai
  • Liu, SW
  • Liu, YP
[EN] Mild steel hot-rolled sections are commonly prismatic because of the rolling process with a furnace, but welded sections made from steel plates do not have such a constraint, especially when robotic welding machines are used. The weight saving could be very significant by, say, using wide flanged section at mid-span and a small flanged section at ends of a simply supported beam. However, design codes do not provide formulae for buckling check of tapered members. This paper proposes a code-free second-order direct analysis for stabilty design of steel frames made of tapered members. The design is further applied to a single layered mega space frame of 136m span. In the whole design process based on the concept of Second-order Direct Analysis, no uncertain effective length and independent member buckling checking are required., The authors are grateful to the financial supports by the Research Grant Council of the Hong Kong SAR Government on the project “Second-Order Analysis of Shallow Dome Structures Made of Tapering Members (PolyU 152047/17E)” and Second-Order Analysis of Flexible Steel Cable Nets Supporting Debris (PolyU 152008/15E)” and support by Innovation and Technology Fund of the Hong Kong SAR Government for the project “Development of an energy absorbing device for flexible rock-fall barriers (ITS/059/16FP)” and by the Hong Kong Branch of Chinese National Engineering Research Centre for Steel Construction of The Innovation and Technology Fund of the Hong Kong SAR Government for the project Advanced Numerical Analysis for Building Structures using High Performance Steel Materials".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

To shear failure of steel and fibre-reinforced concrete circular hollow section composite column at elevated temperature

  • Arha, Tesfamariam
  • Křístek, Vladimir
  • Tretyakov, Alexey
  • Blesak, Lukas
  • Tkalenko, Illia
  • Wald, Frantisek
  • Stefan, Radek
  • Novak, Josef
  • Kohoutková, Alena
[EN] This study predicts the shear strength of steel fibre reinforced concrete (SFRC) members at elevated temperature using numerical modelling. The authors derived the stress-strain relation in the pure shear mode at ambient temperature based on a damage model calibrated at ambient and elevated temperatures. The model was validated on the special experimental arrangement for the pure shear mode of the SFRC in torsion. These results enables to determine the stress-strain diagram at elevated temperature. The shear strength of SFRC is compared with the compressive and tensile strength and used to observe reasons for experimentally observed failure model. The work is a part of comprehensive project focused on development of design models for the steel and SFRC composite columns with circular hollow section (CHS) at elevated temperature. Research includes two levels accuracy/complexity, allowing simplified or advanced approach to design following the coming changes in European standard for composite member design in fire, EN1994-1-2:2021. Experimental studies of the project include mechanical material tests of heated fibre-concrete samples in tension and compression, thermal uniform and non-uniform tests of insulated fragments of CHS and tests of full scale SFRC CHS columns in steady-state and transient-state regimes. Developing advanced FEM simulation of global mechanical behaviour of SFRC CHS columns is a multi-levelled composite mechanical and thermo-model and provide numerous numerical experiments. Together with steel material model in fire, validated FEM model of mechanical behaviour of fibre-reinforce concrete at elevated temperature is performed. Validated simplified and advanced thermal model of SFRC in CHS at elevated temperature gives temperature fields and moisture distribution inside section which depends on direction, heat flux, sizes and gives possibility to model different fire cases of full-scale columns in bending, shear, and buckling at elevated temperature. Proposed analytical and simplified FEM mechanical model of column is taking into account degradation of mechanical properties, analytical models of transfer of heat inside the column section and provides simple solutions for designers., This publication was supported by grant of Grant Agency Czech Republic, No. 15-19073S, Models of steel and fibre concrete composite columns exposed to fire.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

LIF/Mie Droplet Sizing of Water Sprays from SCR System Injector using Structured Illumination

  • Kapusta, Łukasz
[EN] Recent trends in SCR (Selective Catalytic Reduction) systems development increase requirements for UWS (Urea Water Solution) injection. Close-coupled SCR system designs decrease the distance available for water evaporation and urea decomposition. Due to that, much effort is put into static mixing elements design improvement and injection process enhancement. So far, most experimental studies on UWS spray formation were based on Mie scattering visualization using global illumination and shadowgraphy imaging. High speed imaging of Mie signal with global illumination allows to determine global spray parameters such as penetration and angle but does not give information on droplet sizes. Droplet size determination, due to relatively large droplets generated by SCR injectors, can be done with Mie scattering or backlight imaging methods. Then the visualized area becomes narrowed since high magnification is required. Determination of droplet size distribution across whole spray in such arrangement requires number of measurements. LIF/Mie (Laser Induced Fluorescence/Mie scattering) technique provides an attractive alternative for rapid determination of droplet size distribution across the whole spray. This method however suffers from multiple scattering effects which might affect droplet size distribution results even in relatively dilute sprays. In this study, LIF/Mie ratio distribution across sprays from commercial automotive injector for SCR systems was determined by simultaneous LIF and Mie detection using structured illumination. Moreover, the results were compared with conventional LIF/Mie imaging. Nd:YAG pulse laser was used as a light source. Second harmonic beam of 532 nm was used to illuminate the sprays. Instead of UWS pure water doped with Eosin Y was used. The results showed that conventional images exhibited much stronger background signal. Moreover, the conventional imaging was sensitive to reflections from experimental setup elements, specifically reflections from LIF camera filter. These two observations prove the importance of using SLIPI for LIF/Mie droplets sizing in sprays for SCR systems. At the same time the obtained results showed that under certain conditions (no accidental reflections in the background) conventional imaging provides similar LIF/Mie ratio as structured illumination. The results showed that the LIF/Mie ratio remains unchanged over the spray cloud. This suggests that SMD remains unchanged as well. The slight increase of LIF/Mie ratio far from the injector outlet could be caused by absence of small droplets due to lower momentum and thus lower penetration distance. This assumption however should be verified with PIV measurement., Current work was supported by the European Smart Growth Operational Programme 2014-2020 through the project “Development of mixing and urea-water solution conversion unit in SCR systems in order to start production of exhaust system for compression ignition engine that meets the Euro 7 emission standards”, grant number: POIR.04.01.04-00-0060/15-02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Integración de la competencia transversal de “conocimiento de problemas contemporáneos” en Asignaturas de Grado

  • Villanueva López, José Felipe|||0000-0002-7684-6884
  • Barrachina, Teresa|||0000-0001-8794-4204
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Lajara-Camilleri, Natalia|||0000-0002-1376-3133
  • Rovira, Andres|||0000-0001-8192-5571
[EN] The current curriculum of the European area of higher education include a series of transverse and specific competences that students should acquire at the end of the different degrees studies. Through the process of Accreditation Board for Engineering and Technology (ABET) carried out in some degrees at the Polytechnic University of Valencia (UPV), was the need to assess and obtain evidence of competences, mainly transversals skills. The competence of "knowledge of contemporary issues" (CT-10) currently suffers from a lack of realization, development and evaluation in the subjects of grade for the different degrees of the Universitat Politècnica de València. The identification of contemporary issues in each of the intrinsic and extrinsic fields of knowledge of grades has to introduce a level of development and gradual implementation that suits the profile of the student in its development in graduate studies, presenting great differences in how to work this competence in the first courses respect the latest courses. The present paper presents different approaches and applications for the implementation, development and evaluation of the competence of "knowledge of contemporary issues" in different subjects of grade, [ES] Los actuales planes de estudio del Espacio Europeo de Educación Superior incluyen una serie de competencias transversales y específicas, que deben adquirir los alumnos al finalizar las distintas titulaciones. A través del proceso de acreditación Accreditation Board for Engineering and Technology (ABET) llevado a cabo en algunas titulaciones en la Universitat Politècnica de València (UPV), quedó patente la necesidad de evaluar y de obtener evidencias de las competencias, principalmente transversales, que deben trabajarse en las titulaciones en cuestión. La competencia de “conocimiento de problemas contemporáneos” (CT-10) adolece en la actualidad de una falta de concreción, desarrollo y evaluación en las asignaturas de grado para las diferentes titulaciones de la Universitat Politècnica de València. La identificación de los problemas contemporáneos en cada uno de los campos intrínsecos y extrínsecos de conocimiento de los grados ha de presentar un nivel de desarrollo e implementación gradual que se adecúe al perfil del alumno en su evolución en los estudios de grado, presentando grandes diferencias la forma de trabajar dicha competencia en los primeros cursos respecto de los últimos cursos. El presente trabajo presenta diferentes aproximaciones y aplicaciones para la implantación, desarrollo y evaluación de la competencia de “conocimiento de problemas contemporáneos” en diferentes asignaturas de grado., Este trabajo ha sido financiado por el Vicerrectorado de Estudios, Calidad y Acreditación y la Escuela Técnica Superior de Ingenieros Industriales (ETSII) de la Universitat Politècnica de València (UPV) a través de la convocatoria de ayudas para PIME 2015-2016, con el proyecto código B10.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Elaboración de material multimedia y uso de un entorno virtual en el proceso de enseñanza-aprendizaje de las prácticas de laboratorio en Química Física

  • López Tocón, Isabel
[EN] Using new technologies, such as the Moodle e-learning platform, a new and more active didactic strategy has been developed in the training of lab practices in subjects assigned to the Department of Physical Chemistry, specifically in the subject Basic Operations of Laboratory, which is taught in the first year of the Degree in Chemistry. A new multimedia and audiovisual teaching material has been designed and elaborated on the most basic procedures that are carried out in a chemical lab. This educational material serves as a support for the teacher in the lab classes, besides supposing a complement to the practices’ script for the students. In this way, we try to facilitate the autonomous learning of the student, to optimize the working time in the lab and to increase the availability of the teacher. A question bank has also been developed for each lab practices in order to carry out on-line tests of knowledge once the practice is finished., [ES] Haciendo uso de las nuevas tecnologías, como es la plataforma educativa Moodle, se ha desarrollado una nueva estrategia didáctica más activa y dinámica en la impartición de las prácticas de laboratorio en asignaturas adscritas al Departamento de Química Física, y en concreto en la asignatura de Operaciones Básicas de Laboratorio, que se imparte en el primer curso del Grado en Química. Se ha diseñado y elaborado un nuevo material didáctico multimedia y audiovisual, sobre los procedimientos más básicos que se realizan en un laboratorio químico, y que sirve como apoyo para el docente en las clases presenciales de laboratorio, y como complemento al guión de prácticas que recibe el alumno. De esta forma se intenta facilitar el aprendizaje autónomo del estudiante, optimizar el tiempo de trabajo en el laboratorio y aumentar la disponibilidad del profesor. También se ha elaborado un banco de preguntas para cada una de las prácticas con objeto de realizar pruebas de conocimiento on-line, una vez finalizada la práctica en el laboratorio., Este trabajo se enmarca dentro del Proyecto Docente PIE15-027, correspondiente a la Convocatoria de Proyectos de Innovación Educativa 2015-2017 de la Universidad de Málaga.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Fe/MgO Powder Composite Sintered by Microwave Heating

  • Bureš, Radovan
  • Fáberová, Mária
  • Birčáková, Zuzana
  • Kovaľ, Vladimir
  • Kollar, Peter
  • Fuzer, Jan
  • Jakubcin, Milos
  • Slovensky, Peter
This work was supported by projects: APVV 0115-15 and VEGA 2/0108/18.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Initial test campaign of an innovative dual source heat pump

  • Marchante-Avellaneda, Javier|||0000-0001-5680-5033
  • Cazorla-Marín, Antonio|||0000-0003-3314-0395
  • Montagud- Montalvá, Carla|||0000-0002-7118-6119
  • Corberán, José M.
This paper describes the experimental setup and the test campaign performed on an innovative prototype of reversible dual source heat pump, with aerothermal and geothermal heat sources working with R32 as refrigerant. The addition of the air source allows the use each time of the most convenient source, hence leading to a considerably higher efficiency, as well as to dramatically reducing the size of the ground source heat exchanger so that the initial cost is much lower than the one of a full geothermal heat pump installation. The design and construction of this unit is the result of the research carried out under the frame of the GEOTeCH, project funded by the European Commission under the H2020 program. This paper first describes the employed experimental setup, and then presents the definition of the test matrix for the characterization of the heat pump performance under each operation mode, which has been based on the Design of Experiments methodology in order to minimize as much as possible the number of test points. 227 test points were acquired, what has allowed the characterization of the unit performance in all operation modes and a broad range of operating conditions, through adequate Response Surfaces. Finally, a comparison of the experimental performance results with the calculations performed with IMST-ART software is presented., The present work has been supported by the European Union under the Horizon 2020 Framework Programme for European Research and Technological Development (2014–20) inside the framework of the project 656889— EOTeCH (Geothermal Technology for Economic Cooling and Heating). Additionally, funding was received by the Generalitat Valenciana inside the programme ‘Ayudas para la contratación de personal investigador en formación de carácter predoctoral (ACIF/2016/131)’ and by the Ministerio de Educación, Cultura y Deporte inside the programme ‘Formación de Profesorado Universitario (FPU15/03476)’
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Análisis estructural de los problemas orientado al aprendizaje de Operaciones de Separación

  • Santafé Moros, María Asunción|||0000-0002-0933-108X
  • Gozálvez-Zafrilla, José M.|||0000-0003-4419-6765
  • Navarro-Laboulais, J.|||0000-0001-6347-5407
[EN] The subject Unit Operations of the Bachelor degree in Chemical Engineering is focused on learning the common operations used in chemical processes. After our experience, most of the students perceive that the subject is made up of independent learning units which requires the study of a great amount of theoretical concepts involving several unconnected calculations for each one, so they think the subject is tedious and complex. The reason is that they are not aware about the similarities among the unit operations. Besides, the procedures required to solve full exercises are hard for them and they misunderstood the reasoning process. A deep analysis of the exercises used to learning the unit operation calculations was carried out. Besides, the main features of mathematical software used (Mathcad) were considered. The aim is to do the reasoning process more visual, to facilitate the awareness of the transversality of the several unit operations and to reduce the time spent on the problem-solving. The result has been the restructuration of the exercise by means of “calculation areas” and the implementation of “function libraries”, which has improved the learning outcomes, [ES] La asignatura Operaciones de Separación del Grado de Ingeniería Química se centra en el aprendizaje de las operaciones de mayor aplicación en procesos de ingeniería química. La falta de conciencia de las similitudes entre las distintas operaciones hace que una gran parte de los alumnos tenga la visión de que la asignatura está formada por unidades inconexas que requieren el estudio de muchos conceptos teóricos con cálculos diferenciados para todos ellos, de manera que les parece poco atractiva, compleja y voluminosa. La resolución de un problema completo les resulta, en general, larga y tienden a perderse en el proceso de razonamiento. Estas dificultades se han hecho más evidentes en los estudios de Grado, respecto a la misma asignatura de la anterior titulación de Ingeniero Químico. Por ello, se ha realizado un profundo análisis de los problemas utilizados para aprender los cálculos de cada operación, así como de las características del software utilizado en su resolución (Mathcad). Todo ello con el objetivo de hacer facilitar el proceso de razonamiento y la conciencia de transversalidad entre las distintas operaciones y de disminuir el tiempo requerido. Como resultado se han restructurado los problemas con el uso de “zonas de cálculo” y la creación de “librerías de funciones”, lo que ha supuesto una mejora en el aprendizaje., Los miembros del grupo ASEI agradecen al Vicerrectorado de Estudios y Convergencia Europea y al Instituto de Ciencias de Educación de la Universitat Politècnica de València la concesión del PIME A26/14 “Desarrollo de estrategias para la mejora del aprendizaje y evaluación de los problemas de Operaciones de Separación”
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Hybrid and intermittent drying of carrot (Daucus carota var. Nantes)

  • Szadzińska, Justyna
  • Mierzwa, Dominik
  • Bukowski, Krzysztof
[EN] A combination of high power airborne ultrasound and microwaves in hot air drying was developed to investigate the effect of intermittent mode on process effectiveness and quality of carrot. The drying experiments were carried out in an innovative hybrid dryer. The course of moisture ratio, drying rate, specific energy and water consumption, colour, water activity and shrinkage were discussed. The results showed that intermittent ultrasound and microwaves in convective drying accelerate the heat and mass transfer, leading to shorter drying time and faster drying rate. It was found that hybrid-intermittent drying can improve the energy efficiency and product quality., This study was conducted as a part of research project no. 2014/15/D/ST8/02777 sponsored by the National Science Centre in Poland.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Evaluation of the combustion characteristics of isolated droplets of Jet A blended with ethanol and butanol

  • Muelas, Álvaro
  • Remacha, Pilar
  • Ballester, Javier
[EN] In light of the potential of ethanol and butanol as alternative fuels for blending with conventional kerosene in gas turbine engines, experimental data regarding the burning characteristics of these blends are required in order to better understand their combustion process. In this study, free-falling droplets of Jet A, ethanol, butanol and their mixtures (20% alcohol in Jet A by volume) were examined in a combustion chamber which provides representative conditions of real flames, both in terms of temperature and oxygen availability. Results show that the evolution of droplet diameter for Jet A and its blends with both alcohols are very similar, regardless of the obvious compositional differences. On the other hand, sooting behaviors are found to be quite different, with a clear reduction in the sooting propensity of the Jet A/alcohol mixtures when compared to neat kerosene. These results are consistent with previous studies in gas turbines, suggesting that such blends are viable alternative fuels with similar combustion characteristics to Jet A, but with much less propensity to produce soot. Moreover, this study provides new results on the combustion properties of Jet A/ethanol and Jet A/butanol mixtures, for which very scarce data exist in the open literature., This work was supported by the Spanish Ministry of Education through the pre-doctoral grant FPU15/01866 and the Ministry of Science and Innovation through the research projects CSD2010-00011 and ENE2016-76436-R. The analysis of the Jet A sample was kindly provided by Drs. R. Murillo and M. Callen, from the Instituto de Carboquímica (ICB-CSIC). The authors are also grateful to Dr. Álvaro Sobrino for his assistance with data capture and analysis, and to Luis Ojeda for his support in the experimental tasks. The work of Mario Angeloni in the development of the Droplet Combustion Facility, without which this study would not have been possible, is also gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Integración de la competencia transversal de “conocimiento de problemas contemporáneos” en la asignatura Vibraciones Mecánicas

  • Rovira, Andres|||0000-0001-8192-5571
  • Barrachina, Teresa|||0000-0001-8794-4204
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Lajara-Camilleri, Natalia|||0000-0002-1376-3133
  • Villanueva López, José Felipe|||0000-0002-7684-6884
[EN] Current degrees belonging to the European Higher Education Area (EHEA) represent a change on the learning towards the competence based education. After the implantation of the new degree programs and in order to group different skills profiles, the Universitat Politecnica de Valencia (UPV) defined a list of generic competences. This list consists of a total of 13 competences to be trained and assessed in different subjects forming part of a degree. One of these competences is the “knowledge of contemporary issues”, which refers to the need for students to understand the political, social, legal and environmental issues and values, as defined by the UPV. This competence also takes into account the mechanism of expansion and dissemination of knowledge. In this paper a preliminary experience carried out in the Mechanical Vibrations course is described. An activity framed in a laboratory session has been designed to this end, where this competence is introduced related to the contents of the subject. The results of this experience indicate that the training of the competence "knowledge of contemporary issues" contributes to improve learning in the subject., [ES] Los actuales planes de estudios pertenecientes al Espacio Europeo de Educación Superior (EEES) representan un cambio en el aprendizaje hacia la educación basada en competencias. Tras la implantación de los nuevos programas de grado y con el fin de agrupar los distintos perfiles competenciales, la Universitat Politècnica de València (UPV) ha definido una lista de competencias transversales. Esta lista se compone de un total de 13 competencias para ser trabajadas y evaluadas en diferentes asignaturas que forman parte cada titulación. Una de estas competencias es el "conocimiento de problemas contemporáneos", que se refiere a la necesidad de que los estudiantes comprendan los problemas y valores políticos, sociales, legales y ambientales, tal como se define por la UPV. Esta competencia también tiene en cuenta el mecanismo de expansión y difusión del conocimiento. En este trabajo se describe una experiencia preliminar llevada a cabo en la asignatura Vibraciones Mecánicas. Para ello se ha diseñado un actividad, enmarcada en una sesión de prácticas de laboratorio, en la que se introduce esta dimensión relacionada con los contenidos de la asignatura. Los resultados de esta experiencia indican que el trabajo de la competencia “conocimiento de problemas contemporáneos” contribuye a mejorar el aprendizaje en la asignatura., Este trabajo ha sido financiado por el Vicerrectorado de Estudios, Calidad y Acreditación y la Escuela Técnica Superior de Ingenieros Industriales (ETSII) de la Universitat Politècnica de València (UPV) a través de la convocatoria de ayudas para PIME 2015-2016, con el proyecto código B10.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Characterization of the performance for water-to-water and air-to-water heat pumps: Development of simple and compact polynomial correlations

  • Marchante-Avellaneda, Javier|||0000-0001-5680-5033
  • Navarro-Peris, Emilio|||0000-0002-0608-2129
  • Corberán, José M.
  • Llopis, Belén
Nowadays, the development of models is one of the most common problems in many research studies. In the field of refrigeration and heating, researchers increasingly require compact models with a reduced computational time. These models must be able to predict the performance of heat pumps and chillers with reasonable accuracy. This paper describe the development of simple and compact polynomial models for the performance characterization in these machines. To this end, this study consists of two main parts: Obtaining the polynomial models and then its final adjustment with experimental data. The unit selected for this study, is an innovative prototype of reversible dual source heat pump, with aerothermal and geothermal heat sources working with R32 as refrigerant. This has enabled us to analyze the response surface for the performance of the two main heat pump technologies: water-to-water and air-to-water heat pumps., The present work has been supported by the European Union under the Horizon 2020 Framework Programme for European Research and Technological Development (2014–20) inside the framework of the project 656889—GEOTeCH (Geothermal Technology for Economic Cooling and Heating). Additionally, funding was received by the Ministerio de Educación, Cultura y Deporte inside the programme ‘Formación de Profesorado Universitario (FPU15/03476)’.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Hassan Fathy, Aldo van Eyck and Bernard Rudofsky Drawing Architecture

  • Campos-Uribe, Alejandro|||0000-0002-9382-3481
  • Lacomba-Montes, Paula|||0000-0002-1916-2689
This article analyses the drawings of the Egyptian architect Hassan Fathy, the Dutch architect Aldo van Eyck and the Czech architect Bernard Rudofsky as three ways of representing architecture. It presents a comparative study of their graphic approaches as a basis to understand their built works. On the one hand, Fathy s drawings do not seek to represent spaces, but rather to invent new ways of living. They are full of symbols, like a juxtaposition from different points of view that captures the key aspects of the place in which the architecture evolves. They show us a land of contrasts, with intense light from a radiant sun and deep shadows that create a sense of home. In contrast, Van Eyck s drawings are a collection of indications that seem to affix thoughts onto paper. The lines and colours, accompanied by words, make up a truly visual text that does not attempt to technically describe the building, but creates a sort of instruction manual for the layout of objects on a surface. Lastly, Bernard Rudofsky does not propose with his drawings a new way of constructing architecture, but a new way of living. For this reason he fills his images with individuals carrying out specific actions, explaining through their movements the suggested uses of the spaces. The three styles of drawing show, ultimately, three different ways to understand the profession: from Fathy s ambiences shaped by tradition and natural forces, to Van Eyck s montages of autonomous fragments, to Rudofsky s investigations of new modes of living. In all cases, drawing is now, truly, creating architecture.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Variabilidad de la línea de costa a partir de imágenes de satélite y su relación con la textura del sedimento, Coastline variability from satellite imagery and its relation with sediment texture

  • Cabezas-Rabadán, Carlos|||0000-0002-0596-4920
  • Pardo Pascual, Josep Eliseu|||0000-0003-0471-9795
  • Almonacid-Caballer, Jaime
  • Soriano-González, Jesús
[EN] Beaches are natural environments of great interest for our society. They go through remarkable changes run by key factors that are interconnected according to the literature. A better understanding of these parameters, such as sediment texture and shoreline variability, would be of a great interest for coastal monitoring and planning. Shorelines of all Landsat 8 (OLI) images available over the course of one year have been obtained for determining the variability that has occurred in different Valencian beaches. Likewise, the relation between shoreline variability and sediment texture has been evaluated, showing that beaches with higher variability over the year have smaller sediment texture, which is also related with gentle slopes, and vice versa. The methodology allows obtaining the shoreline variability, a key parameter of beach morphodynamics, in a semiautomatic way. The variability allows developing a gross estimate of beach texture., [ES] Las playas son entornos naturales de enorme interés para nuestra sociedad. Estos espacios están sometidos a grandes cambios regidos por factores clave fuertemente interrelacionados según la literatura. Un mayor conocimiento de estos parámetros, como la textura del sedimento o la variabilidad de la línea de costa de las playas resultaría de gran interés para la monitorización y gestión de la costa. Se han obtenido las líneas de costa de todas las escenas Landsat 8 (OLI) disponibles a lo largo de un año para, a partir de ellas, determinar la variabilidad de diferentes playas valencianas. Asimismo, se ha evaluado la relación existente entre dicha variabilidad y la textura del sedimento de las playas, mostrando que las playas con mayores cambios en la línea de costa a lo largo del año son aquellas con un tamaño de grano menor, asociado a pendientes más suaves y viceversa. La metodología seguida incluye la obtención de forma semiautomática de la variabilidad de la línea de costa, un parámetro clave de la morfodinámica costera, y a partir de ella la estimación a grandes rasgos de la textura del sedimento de las playas., Este proyecto ha sido realizado con la ayuda de la beca FPU15/04501 concedida por el MECD a C. Cabezas, así como con el proyecto RESETOCOAST (CGL2015- 69906-R) del programa Retos del MINECO. Los autores agradecen el apoyo de la Oficina Técnica DevesaAlbufera.
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Capítulo o parte de un libro (BookPart)

Plant antioxidants in food emulsions

  • García Pérez, Pascual
  • Lozano Milo, Eva
  • Gallego Veigas, Pedro Pablo
  • Tojo Suárez, Maria Concepcion
  • Losada Barreiro, Sonia
  • Bravo Díaz, Carlos Daniel
Addition of free radical scavenging antioxidants (AOs) is one of practical strategies controlling the oxidative stability in food emulsions. Attention has been directed toward AOs derived from natural plant extracts with the capacity to improve health and well-being due to lack of consumers’ trust toward synthetic antioxidant in food. Nevertheless, antioxidant efficiency varies widely from one compound to another and the most abundant AOs in our diet are not necessarily those that have the best availability profile at the reaction place with free radicals. In this book chapter, we will provide a state-of-the-art summary of the uses of plant AOs in colloidal systems, ranging from their main structural features to their benefits for the human health and their antioxidant role in controlling the oxidative stress and, particularly, the oxidation of lipid-based food emulsions., Xunta de Galicia | Ref. ED431D-2017/18, Ministerio de Educación y Ciencia | Ref. CTQ2006-13969-BQU, Ministerio de Educación, Cultura y Deporte | Ref. FPU15/04849, Xunta de Galicia | Ref. POS-B/2016/012
RUC. Repositorio da Universidade da Coruña
Publicación Capítulo o parte de un libro (BookPart)

Fully automated identification and clinical classification of macular edema using optical coherence tomography images

  • Moura, Joaquim de
  • Samagaio, Gabriela
  • Novo Buján, Jorge
  • Fernández, María Isabel
  • Gómez-Ulla, Francisco
  • Ortega Hortas, Marcos
[Absctract]: Diabetic macular edema is a relevant ocular disease associated with diabetes mellitus that constitutes a concerning global health issue. This disease is one of the main causes of reversible blindness in industrialized countries, despite the availability of effective health interventions. This macular disorder is a consequence of the appearance of abnormal fluid regions within the main tissues of the retina that significantly decrease the patient's visual acuity. These fluid accumulations are also known as macular edemas (MEs). In this chapter, we present a computational methodology for the identification and clinical classification of ME using optical coherence tomography (OCT) scans, following the clinical classification of reference in the ophthalmological field. The presented system was tested with a dataset composed of 170 OCT scans retrieved from different patients that were labeled by a clinical expert. The presented system obtained satisfactory results in the localization of the area affected by each type of ME, even when they are combined in the same region of the retina. This fully automatic tool has demonstrated to be very useful not only for patients (helping in the early diagnosis of diseases that, consequently, improve their quality of life and well-being), but also in clinical systems by reducing costs., This work is supported by the Instituto de Salud Carlos III, Government of Spain and FEDER funds of the European Union through the DTS15/00153 and DTS18/00136 research projects and by the Ministerio de Ciencia, Innovacio´n y Universidades, Government of Spain through the DPI2015-69948-R and RTI2018- 095894-B-I00 research projects. Also, this work has received financial support from the European Union (European Regional Development Fund [ERDF]) and the Xunta de Galicia, Centro singular de investigacio´n de Galicia accreditation 2016–19, Ref. ED431G/01; and Grupos de Referencia Competitiva, Ref. ED431C 2016-047.
RUC. Repositorio da Universidade da Coruña
Publicación Capítulo o parte de un libro (BookPart)

Intraretinal fluid map generation in optical coherence tomography images

  • Vidal, Plácido
  • Moura, Joaquim de
  • Novo Buján, Jorge
  • Penedo, Manuel
  • Ortega Hortas, Marcos
[Abstract]: The retina represents one of the most studied parts of the human body, thanks to its easy access for any ophthalmological study. It represents the main neurosensory part of the eye and, by its study, pathologies not only from the visual system but also from different body systems (like the neural system or vascular system) can be detected. Among the principal medical imaging modalities that are used to study the eye fundus and the retinal histological structures, the optical coherence tomography (OCT) has proven to be one of the most reliable techniques. It is widely used for the detection of diseases like the diabetic macular edema and the age-related macular degeneration, which cause fluid leakages between the retinal layers. Both these diseases are among the main causes of blindness in developed countries, as these leakages tear the retinal structure and provoke the formation of other pathological bodies. As the symptoms start to be noticeable only when they cause a severe amount of damage to the retinal structures that may only be solved with surgical procedures, an early detection of these cystoid bodies became an impending matter. If these leakages are found in time, a simple and noninvasive treatment is sufficient to prevent further damage and reduce the damage already suffered. As both pathologies are among the main causes of blindness, several studies have recently proposed methodologies to aid in their early detection and diagnosis. These proposals all circle around the same idea: generating a precise segmentation of these cystoid fluid leakages in the OCT images. These proposals have achieved an acceptable rate of success, but they limit their scope to perfectly define cystoid bodies. In reality, these cystoid bodies may appear mixed with normal retinal tissues and other pathological structures, not having a clear defined boundary to segment. Thus, an alternative paradigm for these fluid leakage detections was proposed, based on a regional analysis and an intuitive robust representation. In this chapter, we explain and provide an overview of this paradigm, and possibilities for its implementation in computer-aided diagnostic systems., This study was supported by the Instituto de Salud Carlos III, Government of Spain and FEDER funds of the European Union through the DTS15/00153 research projects and by the Ministerio de Economía y Competitividad, Government of Spain through the DPI2015-69948-R research project. Also, this study has received financial support from the European Union (European Regional Development Fund [ERDF]) and the Xunta de Galicia, Centro singular de investigación de Galicia accreditation 2016–19, Ref. ED431G/01; and Grupos de Referencia Competitiva, Ref. ED431C 2016-047., Xunta de Galicia; ED431G/01, Xunta de Galicia; ED431C 2016-047
RUC. Repositorio da Universidade da Coruña
Publicación Capítulo o parte de un libro (BookPart)

Retinal Vasculature Identification and Characterization Using OCT Imaging

  • Moura, Joaquim de
  • Novo Buján, Jorge
  • Rouco, José
  • Barreira, Noelia
  • Penedo, Manuel
  • Ortega Hortas, Marcos
[Absctract]: The eye fundus is the part of the human body where the blood vessels can be directly observed and studied. For this reason, the analysis and diagnosis of many relevant diseases that affect the circulatory system, for example, reference, hypertension, diabetes or arteriosclerosis can be supported by the use of this source of information, analyzing their degree of severity and impact by the study of the properties of the retinal microcirculation. The development of computer aided-diagnosis tools became relevant over the recent years as they support and facilitate the work of specialists, helping to accurately identify the target structures in many processes of analysis and diagnosis. In that sense, the automatic identification of the retinal vasculature is crucial as its manual identification is an exhaustive and tedious work when it is manually performed by the experts. This chapter presents an analysis of the characteristics of the optical coherence tomography imaging and its potential for the retinal vascular identification and characterization. In that sense, we also analyze computational approaches to automatically obtain and characterize the retinal vasculature and provide an intuitive visualization that facilitates the posterior clinical analysis of relevant diseases such as hypertension or diabetes., This work is supported by the Instituto de Salud Carlos III, Government of Spain and FEDER funds of the European Union through the PI14/02161 and the DTS15/00153 research projects and by the Ministerio de Economía y Competitividad, Government of Spain through the DPI2015-69948-R research project. Also, this work has received inancial support from the European Union (European Regional Development Fund-ERDF) and the Xunta de Galicia, Centro singular de investigación de Galicia accreditation 2016-2019, Ref. ED431G/01; and Grupos de Referencia Competitiva, Ref. ED431C 2016-047., Xunta de Galicia; ED431G/01, Xunta de Galicia; ED431C 2016-047
RUC. Repositorio da Universidade da Coruña
Publicación Capítulo o parte de un libro (BookPart)

Corrupción y trata de seres humanos: la comisión por parte de funcionarios públicos como agravante del artículo 177 bis del código penal

  • Rodríguez-López, Silvia
Esta é unha versión aceptada do seguinte documento publicado: RODRÍGUEZ-LÓPEZ, S., 2017. Corrupción y trata de seres humanos: la comisión por parte de funcionarios públicos como agravante del artículo 177 bis del Código Penal. En: Puente Aba, L. M. (dir.); FUENTES-LOUREIRO, M.-A., RODRÍGUEZ-LÓPEZ, S. (coords.). La proyección de la corrupción en el ámbito penal: análisis de una realidad transversal. Granada: Comares, pp. 307-329. ISBN: 978-84-9045-572-2., [Resumen]: Este trabajo aborda las principales problemáticas surgidas en relación con el tratamiento jurídico del fenómeno de la corrupción relacionada con la trata. Para ello, se parte de una aproximación al concepto penal de trata de seres humanos, en la que se delimitan sus elementos definitorios y se distingue este delito del tráfico de inmigrantes o inmigración clandestina del 318bis CP. Posteriormente, se examina y clasifica las posibles conexiones entre la corrupción y la trata de seres humanos a partir de la literatura existente en la materia y de los informes institucionales que recogen casos denunciados a nivel internacional. Finalmente, se analiza el tratamiento jurisprudencial de estos casos en España, lo que elucida no solo el modo en el que se ha dado respuesta a esta problemática, sino también el alcance de la misma., La realización de este trabajo se enmarca en el proyecto de investigación “La proyección de la corrupción en el ámbito penal: análisis de una realidad transversal”, financiado por el Ministerio de Economía y Competitividad y el Fondo Europeo de Desarrollo Regional (DER2015-65411-R, MINECO/FEDER), [SILVIA RODRÍGUEZ LÓPEZ, Investigadora predoctoral de Derecho Penal, Universidade da Coruña], Beneficiaria del Programa de Ayudas para la Formación del Personal Universitario. Referencia FPU15/02242.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

La vida en fuga: cárcel, exilio y autobiografía en Ricardo Bastid

  • Chaves Amieva, Óscar
  • Allepuz García, Pablo
Con autorización de la editorial para este capítulo., Este trabajo es resultado de una ayuda de FPI (BES-2015-072971) del MINECO y del Proyecto del P. E. de I+D «50 años de arte en el Siglo de Plata español (1931-1981)» (HAR2014-53871-P). Este trabajo es resultado de una ayuda de FPU (FPU15/06021) del Ministerio de Educación, Cultura y Deporte y del Proyecto del P. E. de I+D «50 años de arte en el Siglo de Plata español, (1 931-1981)» (HAR2014-53871-P)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Trauma, memoria e identidad. La Guerra Civil como impulso autobiográfico para los artistas españoles

  • Allepuz García, Pablo
Todos sabemos a qué nos referimos cuando hablamos de autobiografía… hasta que llega el momento de definirla. Entonces recurrimos, como solución provisional, a la autoridad de Philippe Lejeune: «relato retrospectivo en prosa que una persona real hace de su propia existencia, poniendo énfasis en su vida individual y, en particular, en la historia de su personalidad». La precisión de cada término pretende distinguir la autobiografía de la biografía sin más, que no cumple la identidad del narrador y del protagonista; de la novela personal, que no cumple la identidad del autor real y el narrador; del diario íntimo, que no cumple la dimensión temporal retrospectiva; del autorretrato como forma ensayística, que no cumple ni la narración ni la temporalización en perspectiva; y para algunos también de las memorias, que no cumplirían el énfasis en la vida individual y la personalidad. A lo largo del presente capítulo se seguirá, por lo general, la categorización de Lejeune, de manera que el objeto de estudio lo constituirán autobiografías y memorias en detrimento de otras aportaciones autobiográficas en un sentido débil., Este capítulo es resultado de una ayuda del Ministerio de Educación, Cultura y Deporte (FPU15/06021) para realizar una tesis doctoral sobre relatos autobiográficos de artistas españoles del siglo xx, bajo la dirección de Miguel Cabañas Bravo y Estrella de Diego Otero, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Abiotic and Biological Technologies for the Remediation of Phenylurea Herbicides in Soils

  • Lara Moreno, Alba
  • Villaverde Capellán, J.
  • Rubio Bellido, Marina
  • Madrid Díaz, Fernando
  • Morillo González, Esmeralda
170 referencias.-, Phenylurea herbicides (PUHs) are reported to be amongst the most extensively used herbicides in agriculture for pre- and post-emergence control of weeds and mosses in a wide variety of crops. Most of the PUHs have been forbidden in some European countries due to their presence in water and soil, which leads to serious environmental and public health problems in a wide variety of organisms, including humans. This review gives an overview of abiotic and biological technologies used for the remediation of soils contaminated by PUHs, including their limitations and advantages. PUHs present from low to moderate adsorption to soils, the organic matter content being the main influencing factor. For this reason, the majority of the remediation studies in soils are based on the most hydrophobic PUHs, diuron and linuron. The degradation of PUHs in the environment is primarily considered to be due to microbial transformation, and most of the techniques developed for soils are based on bioremediation, which can be enhanced through biostimulation and bioaugmentation processes, and also by the addition of solubilizing agents to increase PUHs bioavailability. But also, abiotic processes have to be considered, remarkable are those that are based on advanced oxidation processes (AOPs), widely used in the decontamination of PUHs in water, but which can be considered as emerging technologies for soils tested only at lab scale. © 2021, The Author(s), under exclusive license to Springer Nature Switzerland AG., This work was funded by the Spanish Ministry of Science, Innovation and Universities under the research project CTM2017-82472-C2-1-R (AEI/FEDER, UE). A. Lara-Moreno acknowledges the Spanish Ministry of Education, Culture and Sports for her FPU fellowship (FPU15/03740)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Análisis de las pruebas de evaluación de la competencia científico-tecnológica en 6º de Educación Primaria, Analysis of the external assessment of the scientifictechnological competence in 6th grade of Primary Education (2016)

  • Martín Páez, Tobías
  • Vílchez-González, José Miguel
  • Carrillo-Rosúa, Javier
  • Lupiáñez-Góméz, José Luis
[ES] Este artículo presenta un análisis documental en el que se analizan las pruebas externas de evaluación de la competencia científica y tecnológica elaboradas para el sexto curso de Educación Primaria desde tres puntos de vista. Primero, su ajuste y adecuación a las variables de los marcos teóricos de referencia. Segundo, caracterizar la presencia de la competencia científica y tecnológica en las pruebas y, tercero, determinar las relaciones entre las variables y la competencia evaluada. Se han analizado 169 actividades mediante triangulación entre expertos. Los resultados muestran debilidad en el ajuste al marco teórico, y que la competencia aplicada exige escasa interpretación de datos y diseño de investigaciones. Finalmente, existe una relación simétrica y positiva entre demandas cognitivas y nivel competencial., [EN] his article presents a documentary analysis focused on the external tests assessing the scientific and technological competence in the sixth year of Primary Education from three different points of view. Firstly, we pay attention to its adjustment and adaptation to the variables of the reference theoretical frameworks; secondly, we characterize the presence of scientific and technological competence in the tests and, thirdly, we determine the relationships between the variables and the evaluated competence. 169 activities have been analyzed through triangulation among experts. The results show that the adjustment to the theoretical framework is weak and that the applied competence requires scarce interpretation of data and research design. Finally, there is a symmetrical and positive relationship between cognitive demands and competence level., El artículo ha sido apoyado por el proyecto EDU2015-70565-P financiado por el Ministerio de Economía y Competitividad de España. Al Ministerio de Educación, Cultura y Deporte, por la concesión de la ayuda FPU15/04972 en la que se enmarca la investigación.
Archivo Digital UPM
Publicación Capítulo o parte de un libro (BookPart)

Introducción a las zeolitas naturales de Iberoamérica

  • Costafreda Mustelier, Jorge Luis|||0000-0002-5125-4575
  • Martín Sánchez, Domingo Alfonso|||0000-0002-3179-2245
  • Costafreda Velázquez, Jorge Luis
Archivo Digital UPM
Publicación Capítulo o parte de un libro (BookPart)

Las zeolitas naturales de Cuba

  • Costafreda Mustelier, Jorge Luis|||0000-0002-5125-4575
  • Martín Sánchez, Domingo Alfonso|||0000-0002-3179-2245
  • Rosell Lam, Mercedes
  • Costafreda Velázquez, Jorge Luis
Archivo Digital UPM
Publicación Capítulo o parte de un libro (BookPart)

Las zeolitas naturales de España

  • Costafreda Mustelier, Jorge Luis|||0000-0002-5125-4575
  • Martín Sánchez, Domingo Alfonso|||0000-0002-3179-2245
  • Costafreda Velázquez, Jorge Luis
Archivo Digital UPM
Publicación Capítulo o parte de un libro (BookPart)

Las zeolitas naturales en otros paises de Iberoamérica

  • Costafreda Mustelier, Jorge Luis|||0000-0002-5125-4575
  • Martín Sánchez, Domingo Alfonso|||0000-0002-3179-2245
  • Costafreda Velázquez, Jorge Luis
Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

One land, two peasantries Moriscos and Old Christians in the upper Genal Valley, Málaga (16th - 18th centuries), Une terre, deux paysanneries: morisques et « vieux » chrétiens dans la vallée de l'Alto Genal

  • López García, Esteban|||0000-0002-3137-6460
  • Díaz Sierra, Ignacio|||0000-0002-4673-4259
  • Retamero, Fèlix|||0000-0003-1586-340X
We present the results of research undertaken in the Genal Valley (Málaga, Spain), where Morisco and Castilian peasants coexisted for most of the 16th century. Our analysis of the written record, which was combined with fieldwork, enabled us to identify the agricultural areas used by both communities. Our examination of the distribution of land ownership has revealed that Morisco and Castilian fields formed separate compact blocks, and that the larger and flatter plots of land were owned by Castilians. We have also noted that the property of Moriscos tended to be fragmented into small plots, which must have prevented any single Morisco landowner from amassing large, compact blocks of land. The expulsion of the Moriscos in 1570 triggered a tendency towards the concentration of land in fewer hands., Cet article présente les résultats de la recherche menée dans deux villes de la vallée de l'Alto Genal (Málaga, Espagne) où cohabitaient des paysans morisques et castillans pendant la majeure partie du XVIe siècle. L'analyse des sources écrites en combinaison avec le travail sur le terrain a permis d'identifier les espaces agraires utilisées par les deux communautés. La répartition des différents biens fonciers montre deux types de possession bien distincts entre les champs des morisques et ceux des castillans. Il paraît que les champs vastes de la plaine appartiennent plutôt aux castillans, tandis que les petits champs fragmentés étaient en mains des morisques. La distribution fragmentée des possessions des morisques a - sans aucun doute - freiné la formation de propriétés étendues et compactes entre les mains d'un seul propriétaire et l'expulsion des morisques, en 1570, a certainement accéléré ce processus de concentration.