Pasar al contenido principal

OPTIMIZACION DE ELECTROCATALIZADORES BASADOS EN NANOCOMPOSITES HIBRIDOS ESTABLES PARA PILAS DE COMBUSTIBLE, ELECTROLIZADORES Y PILAS REGENERATIVAS

ENE2017-83976-C2-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Emerging carbon nanostructures in electrochemical processes

  • Pérez Rodríguez, Sara
  • Alegre Gresa, Cinthia
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
5 figures., Carbonaceous materials have always played an important role in history of electrochemical processes, from the fabrication of solid electrodes to the development of porous matrixes in the conversion and storage of energy and chemicals. This book chapter provides a general overview of emerging carbon nanostructures potentially used in electrochemistry. One-dimensional carbon nanofilaments, such as carbon nanotubes and carbon nanofibers, two-dimensional graphene, and three-dimensional materials, such as carbon gels and ordered mesoporous carbons, are reviewed. The chapter focuses on the physicochemical properties and synthesis methodologies of these carbon nanostructures together with their application to cutting-edge technologies for electrochemical energy conversion and storage, such as fuel cells, electrolyzers, supercapacitors, or batteries. The major challenges and directions for future research are also discussed to guide the design of efficient carbon-based electrodes and catalysts for electrochemical devices., Authors acknowledge financial support given by Spanish Ministry of Science, Innovation and University (MICINN) through project ENE2017-83976-C2-1-R (cofounded by FEDER). C. Alegre and D. Sebastián acknowledge also MICINN for their Juan de la Cierva (IJCI-2017-32354) and Ramón y Cajal (RyC-2016-20944) research contracts, respectively.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Capacitance enhancement of hydrothermally reduced graphene oxide nanofibers

  • Torres Gamarra, Daniel
  • Pérez Rodríguez, Sara
  • Sebastián del Río, David
  • Pinilla Ibarz, José Luis
  • Lázaro Elorri, María Jesús
  • Suelves Laiglesia, Isabel
9 figures, 4 tables., Nanocarbon materials present sp2-carbon domains skilled for electrochemical energy conversion or storage applications. In this work, we investigate graphene oxide nanofibers (GONFs) as a recent interesting carbon material class. This material combines the filamentous morphology of the starting carbon nanofibers (CNFs) and the interlayer spacing of graphene oxide, and exhibits a domain arrangement accessible for fast transport of electrons and ions. Reduced GONFs (RGONFs) present the partial removal of basal functional groups, resulting in higher mesoporosity, turbostratic stacking, and surface chemistry less restrictive for transport phenomena. Besides, the filament morphology minimizes the severe layer restacking shown in the reduction of conventional graphene oxide sheets. The influence of the reduction temperature (140–220 °C) on the electrochemical behaviour in aqueous 0.5 M H2SO4 of RGONFs is reported. RGONFs present an improved capacitance up to 16 times higher than GONFs, ascribed to the unique structure of RGONFs containing accessible turbostratic domains and restored electronic conductivity. Hydrothermal reduction at 140 °C results in the highest capacitance as evidenced by cyclic voltammetry and electrochemical impedance spectroscopy measurements (up to 137 F·g−1). Higher temperatures lead to the removal of sulphur groups and slightly thicker graphite domains, and consequently a decrease of the capacitance., This research was funded by FEDER, the Spanish Ministry of Science, Innovation and Universities MICINN (ENE2017-83976-C2-1-R & ENE2017-83854-R) and by the Aragón Government to the Fuel Conversion Group (T06_17R). DS thanks MICINN for his Ramón y Cajal research contract (RyC-2016-20944)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Carbon nanostructures as electrocatalyst supports for polymer electrolyte fuel cells

  • Sebastián del Río, David
  • Alegre Gresa, Cinthia
  • Pérez Rodríguez, Sara
  • Lázaro Elorri, María Jesús
11 figures.-- Volume 1: Thermodynamics and electrified interfaces., Polymer electrolyte fuel cells (PEFCs) are undoubtedly an important part in the energy scenario of the future hydrogen economy as they efficiently convert chemical energy into electrical energy with almost zero environmental impact during operation. The major barriers to overcome for widespread commercialization of PEFCs are cost and durability issues, with the development of electrocatalysts as an important challenge. Carbon nanostructures are playing a relevant role in the latest advances of electrocatalyst formulations, acting as either catalyst support or catalyst itself when combined with other elements. Graphene, carbon nanofilaments, carbon gels, mesoporous carbons, and other typologies of carbon nanostructures have shown to be determinant in the activity and durability of the electrodes at fuel cells. In this article, the current situation of fuel cells is briefly revised, with emphasis on PEFCs and the role of carbon materials at different levels and components. Then, a practical guide is provided for the evaluation of the main properties of carbon nanostructures with implications on the development of supports and electrocatalysts, describing the most useful techniques to determine porosity, surface area, chemical composition, nanostructure, capacitance, and oxidation rate. The recent investigations are finally reviewed on graphene, carbon nanofilaments, carbon gels, and ordered mesoporous carbon in the field of fuel cells, mainly as carbon supports or catalytic structures for the reduction of oxygen or the oxidation of alcohols., The authors acknowledge the financial support to this work given by the Spanish Ministry of Economy, Industry and Innovation (MICINN) through the project with reference ENE2017-83976-C2-1-R. David Sebastián and Cinthia Alegre also acknowledge MICINN for their research contracts Ramón y Cajal (RyC-2016-20944) and Juan de la Cierva-Incorporación (IJCI-2017-32354), respectively., Peer reviewed