Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Factors affecting the response of steel columns to close-in detonations

  • Dinu, Florea
  • Marginean, Ioan
  • Dubina, Dan
  • Khalil, Ahmed
  • De Iuliis, Emiliano
[EN] Explosions produced in urban areas by the detonation of explosives are low-probability but high-impact events. When they occur in the immediate vicinity of buildings, the explosions can pose a high risk to the structural integrity (local/global failures) and to the occupants (risk of injury, death). Therefore, the design and the construction of the buildings should contain preventive measures to increase the robustness of the structures. The paper presents the results of recent research carried out on the safety of building structures under extreme actions. Blast tests performed on two identical 3D specimen extracted from a typical moment resisting steel frame structure, allow to calibrate the numerical models of a full scale building structural frame system and evaluate the consequences of close-in detonations on the structural elements. The data of the experimental testing, combined with the numerical modelling, allow to investigate different factors, such as dynamic factors that affect the local failure mechanism and the residual capacity of steel columns under different blast scenarios., This work was supported by a grant of the Romanian National Authority for Scientific Research and Innovation, CNCS/CCCDI - UEFISCDI, project number PN-III-P2-2.1-PED2016-0962, within PNCDI III: “Experimental validation of the response of a full-scale frame building subjected to blast load” - FRAMEBLAST (2017-2018).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Experimental investigations on built-up cold-formed steel beams connected by resistance spot welding

  • Ungureanu, Viorel
  • Both, Ioan
  • Burca, Mircea
  • Grosan, Marius
  • Neagu, Calin
  • Dubina, Dan
[EN] The WELLFORMED research project, ongoing at the CEMSIG Research Center of the Politehnica University of Timisoara, proposes to study a new technological solution for built-up beams made of corrugated steel sheets for the web and thin-walled cold-formed steel profiles for the flanges, connected by resistance spot welding. Within the research project, the experimental work includes tensile-shear tests on the lap joint spot-welded specimens, were different combinations of steel sheets with various thicknesses were tested and, tests on full scale beams in bending. The study intends to demonstrate the feasibility of the proposed solutions, to assess their performance and to enlarge the knowledge by using numerical simulations for the optimization of the current solution and to define the limits of the solution’s applicability., This work was supported by a grant of the Romanian National Authority for Scientific Research and Innovation, CNCS/CCCDI - UEFISCDI, project number PN-III-P2-2.1-PED2016-1684 / WELLFORMED - Fast welding cold-formed steel beams of corrugated sheet web, within PNCDI III.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Evaluation of using genetic algorithms for the estimation of internal parameters in broadband ultrasonic transducers

  • Ruiz Toledo, Abelardo
  • Anthony, David K.
  • Ramos Fernández, Antonio
Proceedings of the International Congress on Ultrasonics, Vienna, April 9-13, 2007. 4 páginas, 2 figuras., Piezoelectric transducers of the broadband type are used in many ultrasonic transceiver systems for industrial detection and medical imaging applications. A precise knowledge of their internal construction parameters is required in modelling and simulations tasks related to these wide band systems, especially when they contain commercial transducer probes, which have construction details that are generally unknown for users. These data are very necessary in order to optimise behaviour and effective responses in such systems. Different procedures have been previously proposed with the aim of determining constructional parameters in the vibrating piezo-ceramic basic elements, but there is still not a comprehensive solution for more generic estimation problems related to wideband devices. In this paper, some approaches for estimation of internal parameters in broadband piezoelectric transducers, based on genetic algorithms (GA), are implemented. Distinct settings of GA operational aspects are considered and evaluated by computer simulations, searching adequate conditions for good performances in the resulting GA algorithm. Choices of parameters for selection, crossover and mutation were studied. Additionally, an extension of this artificial intelligence based estimation tool was performed in order to include robustness measures of estimation results under small perturbations on transducer parameters. Estimation results are assessed from the fitting of resulting transfer & impedance functions with experimental measurements obtained from practical responses of a wideband piezoelectric transducer., This work was supported by the R&D National Plan of the Spanish Ministry of Education & Science (Project PN DPI2005-00124) and the Iberoamerican Research Project “Pulsets” (CYTED).
Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

Tema verbal, vocal temàtica y el afijo -ción