Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Shaping Europe's agrivoltaic future: design of four innovative demonstrators through advanced modeling in the SYMBIOSYST project

  • Prithivi Rajan, S.
  • Robledo, Jesus
  • Leloux, Jonathan
  • Gueymard, Christian A.
  • Pignatelli, Angelo
  • Borz, Giovanni
  • Moser, David
  • Kaaya, Ismail
  • Asaa, Shu-Ngwa
  • Katsikogiannis, Alexandros
  • Thalheime, Martin
  • Guerr, Walter
  • Macarulla Martí, Marcel|||0000-0002-5469-7291
  • Roig Villanova, Irma|||0000-0001-9124-0429
  • Gorchs Altarriba, Gil|||0000-0002-2073-2597
  • Groen, Niels
  • MacDonald, James
  • Demofont, Giuseppe
  • Seic, Cinja
  • Bosco, Giacomo
The SYMBIOSYST project, co-funded by the EC Horizon Europe Programme, aims to harmonise solar energy production with agricultural needs by developing photovoltaic (PV) solutions suitable for both open field and greenhouse settings across varied climates in three countries. Four agrivoltaic demonstrators are being planned, covering different scenarios: Bolzano, Italy, focusing on open-field agrivoltaics for apple tree orchards; Scalea, Italy, implementing open agrivoltaics for citrus fruits; Barcelona, Spain, targeting a mix of open agrivoltaic cultivation including tomatoes, onions, fava beans, and lettuce; and the Netherlands, featuring a closed agrivoltaic system within greenhouses dedicated to tomato production. One of the project’s initial tasks is to establish detailed technical specifications to guide the design and implementation of these demonstrators, showcasing innovations in PV module integration, monitoring systems, and environmental considerations such as anti-ice measures and rainwater collection. To achieve this, SYMBIOSYST utilises advanced modeling tools developed specifically for the project, including 3D simulation tools to analyse spatial arrangements of PV layouts, crop configurations, and supporting infrastructures. Techniques such as ray tracing and GPU-based high-resolution 3D view field simulations are employed to conduct high-resolution temporal analysis of light distribution across crops and PV modules, enabling an in-depth evaluation of bifacial gains, shading profiles, and overall system efficiency. The modeling efforts encompass both open agrivoltaic systems for crop and fruit production, as well as closed systems for greenhouse farming, with a focus on optimising the placement and height of the PV arrays, which are mounted on either fixed structures or tracker systems, to facilitate ideal crop growth without compromising energy production. This approach tailors PV module integration to suit both new and existing agricultural setups, while also evaluating potential environmental impacts such as shading effects on crops and incorporating PV modules to mitigate these effects and maximise energy capture. By simulating various configurations and environmental conditions, SYMBIOSYST aims to identify the most effective designs for agrivoltaic systems, leading to increased agricultural yields and efficient renewable energy production. This comprehensive modeling effort underlines the project’s commitment to advancing agrivoltaic technology through innovative design and optimisation strategies, setting a benchmark for future developments in the field.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Sustainability evaluation on agrivoltaic systems: an application in structural supports and photovoltaic modules

  • Campos González, Ángel Santos|||0000-0003-0032-6003
  • Macarulla Martí, Marcel|||0000-0002-5469-7291
  • Josa i Culleré, Irene|||0000-0002-1538-4567
  • Gassó Domingo, Santiago|||0000-0003-0481-4522
This paper presents a life-cycle assessment for the support structures and photovoltaic modules (PV) of the SYMBIOSYST agrivoltaic system in Barcelona. A cradle-to-grave scope was carried out over a 30-year lifetime, using functional units of one solar tracker with 15 modules (6 kWp) and 1 kWh of electricity delivered. Five structural configurations were benchmarked: baseline steel, steel with reuse assuming a 60-year service life, and three wood-based alternatives. Per tracker, climate-change impacts drop from 1,189 kg CO2-eq for baseline steel to 763 kg CO2-eq under reuse, while wood options range from 894 to 972 kg CO2 eq; however, land-use scores increase substantially for wood, reaching 140,460–277,051 Pt. Particulate-matter formation may rise by up to 129% due to glued-laminated timber processing. For PV modules, a semi-transparent design with approximately 60% cell coverage lowers impacts per kWh compared with an opaque module (0.022 vs 0.029 kg CO2 eq), while also reducing pressures on fossil resource use and water use indicators. The results provide decision support for eco-design and project management in engineering., Este trabajo presenta una evaluación del ciclo de vida de estructuras de soporte y módulos fotovoltaicos del sistema agrivoltaico SYMBIOSYST en Barcelona. Bajo una alcance cuna a tumba con horizonte de 30 años, y con unidades funcionales de un seguidor solar con 15 módulos (6 kWp) y 1 kWh de electricidad generada. Se compararon cinco configuraciones de estructura: acero en escenario base, acero con reutilización considerando 60 años de vida útil y tres alternativas en madera. Por seguidor, el impacto en cambio climático disminuye de 1,189 kg CO2 eq en el acero base a 763 kg CO2 eq con reutilización, mientras que las opciones en madera se sitúan entre 894 y 972 kg CO2 eq; no obstante, estas incrementan de forma marcada el uso del suelo, con valores entre 140,460 y 277,051 Pt. La formación de material particulado puede aumentar hasta 129% asociada al uso de madera laminada encolada. En los módulos, la alternativa semitransparente con aproximadamente 60% de cobertura de celdas reduce impactos por kWh frente a un módulo opaco (0.022 vs 0.029 kg CO2 eq), además de disminuir presiones sobre recursos fósiles y agua. Los resultados orientan decisiones de ecodiseño y gestión de proyectos de ingeniería., Authors are thankful to Government of Panama’s National Secretary of Science, Technology and Innovation (Grant agreement SENACYT-BIDP-2023-36), and the Horizon Europe project SYMBIOSYST (Grant agreement No. 101096352), for supporting the actual results and future work., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Shaping Europe's agrivoltaic future: design of four innovative demonstrators through advanced modeling in the SYMBIOSYST project

  • Prithivi Rajan, S.
  • Robledo, Jesus
  • Leloux, Jonathan
  • Gueymard, Christian A.
  • Pignatelli, Angelo
  • Borz, Giovanni
  • Moser, David
  • Kaaya, Ismail
  • Asaa, Shu-Ngwa
  • Katsikogiannis, Alexandros
  • Thalheime, Martin
  • Guerr, Walter
  • Macarulla Martí, Marcel
  • Roig Villanova, Irma
  • Gorchs Altarriba, Gil
  • Groen, Niels
  • MacDonald, James
  • Demofont, Giuseppe
  • Seic, Cinja
  • Bosco, Giacomo
The SYMBIOSYST project, co-funded by the EC Horizon Europe Programme, aims to harmonise solar energy production with agricultural needs by developing photovoltaic (PV) solutions suitable for both open field and greenhouse settings across varied climates in three countries. Four agrivoltaic demonstrators are being planned, covering different scenarios: Bolzano, Italy, focusing on open-field agrivoltaics for apple tree orchards; Scalea, Italy, implementing open agrivoltaics for citrus fruits; Barcelona, Spain, targeting a mix of open agrivoltaic cultivation including tomatoes, onions, fava beans, and lettuce; and the Netherlands, featuring a closed agrivoltaic system within greenhouses dedicated to tomato production. One of the project’s initial tasks is to establish detailed technical specifications to guide the design and implementation of these demonstrators, showcasing innovations in PV module integration, monitoring systems, and environmental considerations such as anti-ice measures and rainwater collection. To achieve this, SYMBIOSYST utilises advanced modeling tools developed specifically for the project, including 3D simulation tools to analyse spatial arrangements of PV layouts, crop configurations, and supporting infrastructures. Techniques such as ray tracing and GPU-based high-resolution 3D view field simulations are employed to conduct high-resolution temporal analysis of light distribution across crops and PV modules, enabling an in-depth evaluation of bifacial gains, shading profiles, and overall system efficiency. The modeling efforts encompass both open agrivoltaic systems for crop and fruit production, as well as closed systems for greenhouse farming, with a focus on optimising the placement and height of the PV arrays, which are mounted on either fixed structures or tracker systems, to facilitate ideal crop growth without compromising energy production. This approach tailors PV module integration to suit both new and existing agricultural setups, while also evaluating potential environmental impacts such as shading effects on crops and incorporating PV modules to mitigate these effects and maximise energy capture. By simulating various configurations and environmental conditions, SYMBIOSYST aims to identify the most effective designs for agrivoltaic systems, leading to increased agricultural yields and efficient renewable energy production. This comprehensive modeling effort underlines the project’s commitment to advancing agrivoltaic technology through innovative design and optimisation strategies, setting a benchmark for future developments in the field., Postprint (published version)